Electron diffraction determination of the vapour phase molecular structure of azetidine, (CH2)3NH

The electron diffraction study of azetidine yielded the following main geometrical parameters (r_a structure): dihedral angle (the angle between the C-C-C and C-N-C planes) φ = 33.1 ± 2.4°, r(C-N) = 1.482 ± 0.006Å, r(C-C) = 1.553 ± 0.009Å, r(C-H) = 1.107 ± 0.003Å, ∠C-N-C = 92.2 ± 0.4°, ∠C-C-C = 86.9 ± 0.4° and ∠C-C-N = 85.8 ± 0.4°.     

On the molecular structure of (CH3)2NSO2N(CH3)2 as studied by gas electron diffraction

The following bond lengths and bond angles have been deduced from a vapour phase electron diffraction study of (CH₃)₂NSO₂N(CH₃)₂: r(C-H) 1.114 ± 0.005 Å, r(S-O) 1.432 ± 0.010 Å, r(N-C) 1.475 ± 0.013 Å, r(S-N) 1.651 ± 0.003 Å, ∠N-C-H 109.3 ± 2.0°, ∠C-N-C 118.0 ± 302°, ∠S-N-C 115.2 ± 1.1°, ∠N-S-N 110.5±1.3° and ∠O-S-O 114.7±2.5°. The sulphur bond configuration and the prevailing conformation, which was identical to that in the crystal, are discussed in relation to analogous sulphide and sulphoxide derivatives.     

The molecular structure of the complex trimethylaluminium dimethyl ether, (CH3)3AlO(CH3)2, determined by gas phase electron diffraction

The molecular structure of (CH₃)₃AlO(CH₃)₂ has been determined by gas phase electron diffraction. The main molecular parameters are AlC = 1.973(11), AlO = 2.014(14), OC = 1.436(3) Å, OAlC = 98.7(1.5), AlOC = 122.6 (0.5) and COC = 114.5(1.7)°. The OC bond distance and the COC valence angle are significantly larger than those in free dimethyl ether. The three valencies of the oxygen atom appear to lie in one plane. It is suggested that the planarity of the oxygen atom is due to across-angle repulsion Al?C(O).     

Vibrational spectra of [(CH3)3NH]3Sb2Cl9, [(CH3)3NH]3Bi2Cl9 and their mixed crystals

The IR and Raman spectra of [(CH₃)₃NH]₃Sb₂Cl₉ (A), [(CH₃)₃NH]₃Bi₂Cl₉ (B) and two of their mixed crystals containing respectively 33% (AB.33) and 42% Bi (AB.42) are analyzed and compared. A and AB.33 show ferroelectric–paraelectric phase transition at 364 K and 344 K, respectively. AB.42 and B are paraelectric in the temperature range between 90 and 365 K. Most of the vibrational modes show continuous changes, with the temperature, in the IR frequencies or intensities with no soft mode behavior. However, characteristic ν(NHCl) and δ(NHCl) vibrations of weakly hydrogen-bonded species are only observed in A and AB.33 below the temperature of the phase transition and are related to the ferroelectricity. The evolution of the IR spectra with the temperature suggests that the ferroelectric properties are connected with the reorientation of the cations which needs a breaking of the weak NHCl hydrogen bonds in the paraelectric phase.     

The crystal and molecular structure of 3,3,6,6-tetramethyl-s-tetrathiane, ((CH3)2CS2]2,

The X-ray crystal structure of 3,3,6,6-tetramethyl-s-tetrathiane (“duplodithioacetone”) confirms earlier nmr studies predicting the molecule to adopt a twist-boat conformation.     

Low-temperature single crystal X-ray diffraction and high-pressure Raman studies on [(CH3)2NH2]2[SbCl5]

The structure of bis(dimethylammonium) pentachloroantimonate(III), [(CH₃)₂NH₂]₂[SbCl₅], BDP, was studied at 15 K and ambient pressure by single-crystal X-ray diffraction as well as at ambient temperature and high pressures up to 4.87(5) GPa by Raman spectroscopy. BDP crystallizes in the orthorhombic Pnma space group with a=8.4069(4), b=11.7973(7), c=14.8496(7) Å, and Z=4; R₁=0.0381, wR₂=0.0764. The structure consists of distorted [SbCl₆]³⁻ octahedra forming zig-zag [{SbCl₅}_n]²ⁿ⁻ chains that are cross-linked by dimethylammonium [(CH₃)₂NH₂]⁺ cations. The organic and inorganic substructures are bound together by the N-H…Cl hydrogen bonds. The distortions of [SbCl₆]³⁻ units increase, partly due to the influence of the hydrogen bonds which became stronger, with decreasing temperature. The preliminary room temperature, high-pressure X-ray diffraction experiments suggest that BDP undergoes a first-order phase transition below ca. 0.44(5) GPa that destroys single-crystal samples. The transition is accompanied by changes in the intensities and positions of the Raman lines below 400 cm⁻¹.     

Multiparameter equations of state for siloxanes: [(CH3)3-Si-O1/2]2-[O-Si-(CH3)2]i=1,…,3, and [O-Si-(CH3)2]6

This article presents the continuation of the work on the development of technical equations of state for linear and cyclic siloxanes already documented in this journal. The fluids considered herewith are octamethyltrisiloxane (MDM, C₈H₂₄Si₃O₂), decamethyltetrasiloxane (MD₂M, C₁₀H₃₀Si₄O₃), dodecamethylpentasiloxane (MD₃M, C₁₂H₃₆Si₅O₄), dodecamethylcyclohexasiloxane (D₆, C₁₂H₃₆Si₆O₆). The 12-parameter functional form proposed by Span and Wagner has been selected because of its positive characteristics. Siloxanes are produced in bulk quantities and are mostly utilized in the cosmetics industry and, mixed, as high-temperature heat transfer fluids. Furthermore, they are used as working fluids in high-temperature organic Rankine cycle power plants. The available property measurements are carefully evaluated and selected for the optimization of equation of state parameters. For some of the fluids, experimental values are scarce, therefore ad hoc estimation methods have been used to supply more information to the procedure for the optimization of the parameters of the equation of state. In addition, saturated liquid density and vapor pressure measurements are correlated with the equations proposed by Daubert and Wagner–Ambrose, respectively, to provide short, simple, and accurate equations for the computation of these properties. The recently developed isobaric ideal-gas heat capacity correlation for the selected siloxanes is included in the thermodynamic models. The performance of the newly developed equations of state is tested by comparison with experimental data and also with predictions calculated with the Peng–Robinson–Stryjek–Vera cubic EoS, as this model was adopted in previous technical studies. The new thermodynamic models perform significantly better than cubic equations of state. T–s and P  – v$v$ diagrams for all the substances are also reported.     

Crystal structure, phase transitions and ferroelastic properties of [(CH3)2NH2]3[Bi2Cl9]

A sequence of structural phase transitions in [(CH₃)₂NH₂]₃[Bi₂Cl₉] (DMACB) is established on the basis of differential scanning calorimetry (DSC) and dilatometric studies. Four phase transitions are found: at 367/369, 340/341, 323/325 and 285/292 K (on cooling/heating). The crystal structure of DMACB is determined at 350 K. It crystallizes in monoclinic space group P2₁/n: a=8.062(2), b=21.810(4), c=14.072(3) Å, β=92.63(3)°, Z=4, R₁=0.0575, wR₂=0.1486. The crystal is built of the double chain anions (“pleated ribbon structure”) and the dimethylammonium cations. Dielectric studies in the frequency range 75 kHz-900 MHz indicate relatively fast reorientation of the dimethylammonium cations over the I, II, III and IV phases. Infrared spectra are recorded in the temperature range 40-300 K and analyzed in region assigned to the symmetric and asymmetric NC₂ stretching vibrations. Optical observations show the existence of the ferroelastic domain structure over all phases below 367 K. The possible mechanisms of phase transitions are discussed on the basis of presented results.     

Vibrational spectrum of [(CD3)3S]I and normal coordinate calculations for [(CH3)3S] and [(CD3)3S] cations

IR (4000-30 cm⁻¹) and Raman (4000-0 cm⁻) spectra of [(CD₃)₃S]I have been observed, together with those of [(CH₃)₃S]I. By assuming a C_3v molecular symmetry for the cations [(CH₃)₃S]⁺ and [(CD₃)₃S]⁺, all the active fundamentals of [(CD₃)₃s]⁺ have been assigned and normal coordinate calculations have been carried out by a symmetry force field for [(CH₃)₃S]⁺ and [(CD₃)₃S]⁺. The strength of the S---C and C---H bonds in the compound has been compared with that in dimethyl sulfide by using their valence stretching force constants.     

Preparation of some complexes of the type (C6H5)3P[(CH3)2AsCH2CH(R)CH2As(CH3)2] M(CO)3 (M = Mo or W,R = H or C(CH3)3)

The title compounds, which contain six-membered chelate rings locked in the chair conformation, have been prepared by the reaction of (C₆H₅)₃P with the appropriate tetracarbonyl derivative in refluxing mesitylene.     

Synthesis, structure and reactivity of [(CF3)3GePt(PPh3)2]2Hg

The reaction of Pt(PPh₃)_n (n = 3 or 4) with [(CF₃)₃Ge]₂Hg or (CF₃)₃GeHgPt(PPh₃)₂Ge(CF₃)₃ (I) gives a stable diplatinum complex [(CF₃)₃GePt(PPh₃)₂]₂Hg (II). X-Ray analysis has established that compound II contains a Ge---Pt---Hg---Pt---Ge chain of C₂ symmetry. Both of the Pt atoms have distorted square-planar coordinations. The bond lengths are: Pt---Hg, 2.630(2) and 2.665(2) Å; Ge---Pt, 2.410(4) and 2.407(4) Å.

Compound II reacts with dihydrogen in THF solution under mild conditions to give mercury and the hydride (CF₃)₃GePt(PPh₃)₂H. On interaction of II with R₂Hg organomercurials (R = Cl, Et, GeEt₃, Ge(CF₃)₃, Ge(C₆F₅)₃) an unknown reaction takes place: Pt(PPh₃)₂ moieties migrate from the polymetallic grouping into the substrate with the formation of the corresponding RHgPt(PPh₃)₂R complexes or their demercuration products, R₂Pt(PPh₃);, (R = Cl, Et). The latter react further with complex I formed in the first step of the process to give Hg and (CF₃)₃GePt(PPh₃)₂R. The reaction schemes are discussed.     

Experimental and theoretical study of the IR spectrum of [(CH2OH)3CNH3]2SiF6 crystal

[(CH₂OH)₃CNH₃]₂SiF₆, (tris(hydroxymethyl)aminomethane)₂SiF₆ crystal, abbreviated as (TRIS)₂SiF₆ crystal, exhibits a solid-solid phase transition (PT) at 182 K. The phase transition is connected with reorientational motion of SiF₆²⁻ and -CH₂OH groups. The vibrational infrared spectra of powdered (TRIS)₂SiF₆ crystal in Nujol and Fluorolube mulls were studied in the wide range of temperatures, from 320 K to 133 K. A wide region of internal vibrations of the TRIS⁺ and SiF₆²⁻ ions was investigated. Temperature changes of wavenumber, width, centre of gravity, and intensity of bands were analyzed to clarify the molecular mechanism of the phase transitions. Theoretical calculations were made based on density functional theory (DFT). The calculated normal vibrational modes of the molecules, their frequencies and intensities were compared with those obtained from experimental data.     

The molecular structure of di-t-butylamine, NH[C(CH3)3]2, as determined by gas-phase electron diffraction: an exceptionally sterically hindered amine

Gaseous di-t-butylamine, NHBu^t₂, has been studied by electron diffraction at a nozzle temperature of ca. 293 K. The diffraction data reveal that this amine is exceedingly hindered. Repulsive steric interactions between the Bu^t groups are mainly relieved by an opening of the CNC valence angle to 135(3)°. Evidence of steric strain may also be found in the non-zero tilts (2–3°) of the Bu^t groups, defining the angle of rotation of these groups about axes through the N-bonded carbon atoms orthogonal to the NC₂ plane. The N---C and C---C bonds, 1.467(13) and 1.561(6) Å, respectively, are on the other hand relatively unstrained. Other principal geometrical parameters are unexceptional: C---H = 1.103(10) Å, NCC = 111.3(1.5)° (mean value) and CCH = 106(2)°. The position of the N-bonded hydrogen atom relative to the NC₂ plane could not be determined. The torsional positions of the Bu^t groups, with respect to the N---C bonds, could not be derived from least-squares refinements. A large number of models with Bu^t groups in various fixed positions were considered; the best fit between the observed and theoretical intensity data was obtained with one Bu^t group being twisted 19° away from the position typified by one C---C bond of this group being anti to the remote N---C bond, and the other Bu^t group similarly twisted by 30°. When viewed along the N---C bonds, the Bu^t groups are twisted in the same direction. Viewed along the C(N)C axis, these groups come close to being staggered with respect to each other. The values of the above bond distances are those of r_a parameters. Parenthesized values denote error limits, being least-squares standard deviations multiplied by a factor of three.     

Syntheses and structural studies on two cycloruthenapentadienyl complexes: [(CO)3RuC4(CH2OH)4]Ru(CO)3·H2O and [(CO)3RuC4(CH2CH2OH)2(C2H5)2]Ru(CO)3

Syntheses and single-crystal X-ray diffraction studies have been completed on two cycloruthenapentadienyl (CO)₆Ru₂L₂ derivatives, with L = CH₂OHC = CCH₂OH and C₂H₅C=CCH₂CH₂OH respectively. Crystal data are as follows: for [(CO)₃RuC₄(CH₂OH)₄]Ru(CO)₃·H₂O, P2₁/c, a 13.72(1), b 9.501(4), c 14.86(1) Å, β 101.10(6)°, R_w = 0.052 for 1911 reflections; for [(CO)₃RuC₄(CH₂CH₂OH)₂(C₂H₅)₂]Ru(CO)₃, P2₁/c, a 9.191(3), b 16.732(4), c 14.903(3) Å, β 113.61(4)°, R_w = 0.042 for 2865 reflections. Both compounds are built up from binuclear units, each unit being regarded as a Ru(CO)₃ fragment π-bonded to a cycloruthenapentadienyl ring. The molecular parameters are compared with those of known cyclometallapentadienyl complexes of transition metals. The presence of a semi-bridging CO group is discussed.     

Crystal and molecular structures of the Rh[(C2H5O)2PS2]3 and Co[(C6H5O)2PS2]3 chelate compounds

The crystal structures of the Rh[(EtO)₂PS₂]₃ (I) and Co[(PhO)₂PS₂]₃ (II) chelate compounds were determined from X-ray diffraction (XRD) data (CAD-4 diffractometer, MoK _β radiation, 1193 F _hkl , R = 0.0516 for I and 513 F _hkl , R = 0.0305 for II). Crystals I are monoclinic: a = 14.233(3) Å, b = 13.570(3) Å, c = 14.272(3) Å; β = 90.66(3)°, V = 2756.3(10) ų, Z = 4, ρ_calc = 1.587 g/cm³, space group C2/c. Crystals II are trigonal: a = 15.149(2) Å, c = 30.306(6) Å; V = 6023.2(16) ų, Z = 6, ρ_calc = 1.493 g/cm³, space group R3ˉ. Structures I and II consist of discrete mononuclear molecules. The coordination polyhedra of the M atoms (M = Rh, Co) are distorted octahedra formed by six sulfur atoms of three cyclic bidentate (RO)₂ PS₂⁻ ligands. Original Russian Text Copyright ? 2008 by R. F. Klevtsova, L. A. Glinskaya, and S. V. Larionov __________ Translated from Zhurnal Strukturnoi Khimii, Vol. 49, No. 2, pp. 330–334, March–April, 2008.     

The crystal structure of N-sodiohexamethyldisilazane,Na[N{Si(CH3)3}2]

The crystal structure of Na[N{Si(CH₃)₃}₂] has been determined from single-crystal x-ray diffraction data collected by counter methods. N-sodiohexamethyldisilazane crystallizes in the mono-clinic space group p21/n with unit cell parameters $\text{a}$ = 9.426(3), $\text{b}$ = 6.921(3), c = 17.974(5)Å, β = 93.83(2)°, and ?_calc = 1.04 g cm^?3 for z = 4 formula units. Least-squares refinement gave a final conventional R value of 0.034 for 1244 independent observed reflections. In the solid state the compound exists in a polymeric arrangement with an average Na-N distance of 2.355(4)Å. The methyl group are configured such that the angle of rotation of the trimethylsilyl moiety about the Si-N bond is 30° from the eclipsed position. The Si-N bond length is 1.690(5)Å, and the Si-N-Si bond angle is 125.6(1)°.     

Synthesis, molecular structure, and catalytic activity of borohydride complexes [(Me3Si)2NC(NPri)2]2Nd(BH4)2Li(thf)2 and [(Me3Si)2NC(NPri)2]2Sm(BH4)2Li(thf)2

The reactions of lanthanide tris(borohydrides) Ln(BH₄)₃(thf)₃ (Ln = Sm or Nd) with 2 equiv. of lithium N,N′-diisopropyl-N′-bis(trimethylsilyl)guanidinate in toluene produced the [(Me₃Si)₂NC(NPrⁱ)₂]Ln(BH₄)₂Li(thf)₂ complexes (Ln = Sm or Nd), which were isolated in 57 and 42% yields, respectively, by recrystallization from hexane. X-ray diffraction experiments and NMR and IR spectroscopic studies demonstrated that the reactions afford monomeric ate complexes, in which the lanthanide and lithium atoms are linked to each other by two bridging borohydride groups. The complexes exhibit catalytic activity in polymerization of methyl methacrylate. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 3, pp. 441–445, March, 2007.     

反常蓝移单电子锂键Y…Li-CH3[Y=CH3, CH2CH3, CH(CH3)2, C(CH3)3]体系的结构与性质

在密度泛函理论B3LYP/6-311++G(d,p)及MP2/6-311++G(d,p)水平上研究了单电子锂键复合物Y…Li—CH3[Y=CH3, CH2CH3, CH(CH3)2, C(CH3)3]的结构与性质. 结果表明, 三种单电子锂键复合物H3CH2C…Li—CH3(II), (H3C)2HC…Li—CH3(III)和(H3C)3C…Li—CH3(IV)单电子锂键强度依II(-26.7 kJ·mol-1)相似文献   

Theoretical calculational studies on the mechanism of thermal dissociations for RN3 (R=CH3, CH3CH2, (CH3)2CH, (CH3)3C)

Mechanisms of RN₃ (R=CH₃, CH₃CH₂, (CH₃)₂CH, (CH₃)₃C) dissociations are proposed based on CAS, MP2 and B3LYP methods. The energy gaps between the ground-state reactants RN₃ and the intersystem crossing (ISC) points are only a little lower than respective potential energy barriers of the spin-allowed reactions, ¹RN₃ → ¹RN + ¹N₂. The ISC point, therefore, is considered as a transition state of the spin-forbidden reactions, ¹RN₃ → ³RN + ¹N₂. The methods of IRC and topological analysis of electron density are used to explain and predict the thermal dissociation pathways of the reactions studied.     

Preparation and structural characterization of [RuCl2(CO)2{Te(CH2SiMe3)2}2] and [RuCl2(CO){Te(CH2SiMe3)2}3]

The objective of the present work was to synthesize mononuclear ruthenium complex [RuCl₂(CO)₂{Te(CH₂SiMe₃)₂}₂] (1) by the reaction of Te(CH₂SiMe₃)₂ and [RuCl₂(CO)₃]₂. However, the stoichiometric reaction affords a mixture of 1 and [RuCl₂(CO){Te(CH₂SiMe₃)₂}₃] (2). The X-ray structures show the formation of the cis(Cl), cis(C), trans(Te) isomer of 1 and the cis(Cl), mer(Te) isomer of 2. The ¹²⁵Te NMR spectra of the complexes are reported. The complex distribution depends on the initial molar ratio of the reactants. With an excess of [RuCl₂(CO)₃]₂ only 1 is formed. In addition to the stoichiometric reaction, a mixture of 1 and 2 is observed even when using an excess of Te(CH₂SiMe₃)₂. Complex 1 is, however, always the main product. In these cases the ¹²⁵Te NMR spectra of the reaction solution also indicates the presence of unreacted ligand.