Highly Effective Water Oxidation Catalysis with Iridium Complexes through the Use of NaIO4

Exceptional water oxidation (WO) turnover frequencies (TOF=17 000 h^?1), and turnover numbers (TONs) close to 400 000, the largest ever reported for a metal‐catalyzed WO reaction, have been found by using [Cp*Ir^III(NHC)Cl₂] (in which NHC=3‐methyl‐1‐(1‐phenylethyl)‐imidazoline‐2‐ylidene) as the pre‐catalyst and NaIO₄ as oxidant in water at 40 °C. The apparent TOF for [Cp*Ir^III(NHC)X₂] ( 1 X , in which X stands for I ( 1 I ), Cl ( 1 Cl ), or triflate anion ( 1 OTf )) and [(Cp*‐NHCMe)Ir^IIII₂] ( 2 ) complexes, is kept constant during almost all of the O₂ evolution reaction when using NaIO₄ as oxidant. The TOF was found to be dependent on the ligand and on the anion (TOF ranging from ≈600 to ≈1100 h^?1 at 25 °C). Degradation of the complexes by oxidation of the organic ligands upon reaction with NaIO₄ has been investigated. ¹H NMR, ESI‐MS, and dynamic light‐scattering measurements (DLS) of the reaction medium indicated that the complex undergoes rapid degradation, even at low equivalents of oxidant, but this process takes place without formation of nanoparticles. Remarkably, three‐month‐old solution samples of oxidized pre‐catalysts remain equally as active as freshly prepared solutions. A UV/Vis feature band at λ_max=405 nm is observed in catalytic reaction solutions only when O₂ evolves, which may be attributed to a resting state iridium speciation, most probably Ir–oxo species with an oxidation state higher than IV.     

Universal xanthate‐mediated controlled free radical polymerizations of the “less activated” vinyl monomers

The living free radical polymerizations of three “less activated” monomers (LAMs), vinyl acetate, N‐vinylcarbazole, and N‐vinylpyrrolidone, were successfully achieved in the presence of a disulfide, isopropylxanthic disulfide (DIP), using 2,2′‐azoisobutyronitrile (AIBN) as the initiator. The living behaviors of polymerizations of LAMs are evidenced by first‐order kinetic plots and linear increase of molecular weights (M_ns) of the polymers with monomer conversions, while keeping the relatively low molecular weight distributions, respectively. The effects of reaction temperatures and molar ratios of components on the polymerization were also investigated in detail. The polymerization proceeded with macromolecular design via interchange of xanthate process, where xanthate formed in situ from reaction of AIBN and DIP. The architectures of the polymers obtained were characterized by GPC, ¹H NMR, UV–vis, and MALDI‐TOF‐MS spectra, respectively. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Development of a Continuous‐Flow System for Asymmetric Hydrogenation Using Self‐Supported Chiral Catalysts

Well‐designed, self‐assembled, metal–organic frameworks were constructed by simple mixing of multitopic MonoPhos‐based ligands ( 3 ; MonoPhos=chiral, monodentate phosphoramidites based on the 1,1′‐bi‐2‐naphthol platform) and [Rh(cod)₂]BF₄ (cod=cycloocta‐1,5‐diene). This self‐supporting strategy allowed for simple and efficient catalyst immobilization without the use of extra added support, giving well‐characterized, insoluble (in toluene) polymeric materials ( 4 ). The resulting self‐supported catalysts ( 4 ) showed outstanding catalytic performance for the asymmetric hydrogenation of a number of α‐dehydroamino acids ( 5 ) and 2‐aryl enamides ( 7 ) with enantiomeric excess (ee) ranges of 94–98 % and 90–98 %, respectively. The linker moiety in 4 influenced the reactivity significantly, albeit with slight impact on the enantioselectivity. Acquisition of reaction profiles under steady‐state conditions showed 4 h and 4 i to have the highest reactivity (turnover frequency (TOF)=95 and 97 h^?1 at 2 atm, respectively), whereas appropriate substrate/catalyst matching was needed for optimum chiral induction. The former was recycled 10 times without loss in ee (95–96 %), although a drop in TOF of approximately 20 % per cycle was observed. The estimation of effective catalytic sites in self‐supported catalyst 4 e was also carried out by isolation and hydrogenation of catalyst–substrate complex, showing about 37 % of the Rh^I centers in the self‐supported catalyst 4 e are accessible to substrate 5 c in the catalysis. A continuous flow reaction system using an activated C/ 4 h mixture as stationary‐phase catalyst for the asymmetric hydrogenation of 5 b was developed and run continuously for a total of 144 h with >99 % conversion and 96–97 % enantioselectivity. The total Rh leaching in the product solution is 1.7 % of that in original catalyst 4 h .     

Origin of Thermal and Hyperthermal CO2 from CO Oxidation on Pt Surfaces: The Role of Post‐Transition‐State Dynamics,Active Sites,and Chemisorbed CO2

The post‐transition‐state dynamics in CO oxidation on Pt surfaces are investigated using DFT‐based ab initio molecular dynamics simulations. While the initial CO₂ formed on a terrace site on Pt(111) desorbs directly, it is temporarily trapped in a chemisorption well on a Pt(332) step site. These two reaction channels thus produce CO₂ with hyperthermal and thermal velocities with drastically different angular distributions, in agreement with recent experiments (Nature, 2018 , 558, 280–283). The chemisorbed CO₂ is formed by electron transfer from the metal to the adsorbate, resulting in a bent geometry. While chemisorbed CO₂ on Pt(111) is unstable, it is stable by 0.2 eV on a Pt(332) step site. This helps explain why newly formed CO₂ produced at step sites desorbs with far lower translational energies than those formed at terraces. This work shows that steps and other defects could be potentially important in finding optimal conditions for the chemical activation and dissociation of CO₂.     

Synthesis,characterization and catalytic activity of novel Co(II) and Pd(II)‐perfluoroalkylphthalocyanine in fluorous biphasic system; benzyl alcohol oxidation

Tetrakis[heptadecafluorononyl] substituted phthalocyanine complexes were prepared by template synthesis from 4‐(heptadecafluorononyloxy)phthalonitrile with Co(CH₃COO)^·₂H₂O or PdCl₂ in 2‐N, N‐dimethylaminoethanol. The corresponding phthalonitrile was obtained from heptadecafluorononan‐1‐ol and 4‐nitrophthalonitrile with K₂CO₃ in DMF at 50 °C. The structures of the compounds were characterized by elemental analysis, FTIR, UV–vis and MALDI‐TOF MS spectroscopic methods. Metallophthalocyanines are soluble in fluoroalkanes such as perfluoromethylcyclohexane (PFMCH). The complexes were tested as catalysts for benzyl alcohol oxidation with tert‐butylhydroperoxide (TBHP) in an organic–fluorous biphasic system (n‐hexane–PFMCH). The oxidation of benzyl alcohol was also tested with different oxidants, such as hydrogen peroxide, m‐chloroperoxybenzoic acid, molecular oxygen and oxone in n‐hexane–PFMCH. TBHP was found to be the best oxidant for benzyl alcohol oxidation since higher conversion and selectivity were observed when this oxidant was used. Copyright © 2008 John Wiley & Sons, Ltd.     

Water Formation under Silica Thin Films: Real‐Time Observation of a Chemical Reaction in a Physically Confined Space

Using low‐energy electron microscopy and local photoelectron spectroscopy, water formation from adsorbed O and H₂ on a Ru(0001) surface covered with a vitreous SiO₂ bilayer (BL) was investigated and compared to the same reaction on bare Ru(0001). In both cases the reaction is characterized by moving reaction fronts. The reason for this might be related to the requirement of site release by O adatoms for further H₂‐dissociative adsorption. Apparent activation energies ( ) are found for the front motion of 0.59 eV without cover and 0.27 eV under cover. We suggest that the smaller activation energy but higher reaction temperature for the reaction on the SiO₂ BL covered Ru(0001) surface is due to a change of the rate‐determining step. Other possible effects of the cover are discussed. Our results give the first values for in confined space.     

Synthesis of insoluble polystyrene‐supported flavins and their catalysis in aerobic reduction of olefins

2′,4′‐p‐Vinylbenzylideneriboflavin ( 2′,4′‐PVBRFl ) was prepared as a flavin‐containing monomer and copolymerized with divinylbenzene and styrene or its p‐substituted derivatives such as 4‐acetoxystyrene, 4‐vinylbenzyl alcohol, and 4‐vinylbenzoic acid to give the corresponding non‐functionalized and functionalized PS‐DVB‐supported flavins PS(H)‐DVB‐Fl , PS(OAc)‐DVB‐Fl , PS(CH₂OH)‐DVB‐Fl , and PS(COOH)‐DVB‐Fl , respectively. PS(OH)‐DVB‐Fl was also prepared by hydrolysis of PS(OAc)‐DVB‐Fl under basic conditions. These novel flavin‐containing insoluble polymers exhibited characteristic fluorescence in solid state, except PS(OH)‐DVB‐Fl , and different catalytic activities in aerobic reduction of olefins by in situ generated diimide from hydrazine depending on their pendant functional group. For example, PS(H)‐DVB‐Fl was found to be particularly effective for neutral hydrophobic substrates, which could be readily recovered by a simple filtration and reused more than 10 times without loss in catalytic activity. On the other hand, PS(OH)‐DVB‐Fl and PS(COOH)‐DVB‐Fl proved to be highly active for phenolic substrates known to be less reactive in the reaction with conventional non‐supported flavin catalysts. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 1706–1713     

CO在Ag掺杂的氧化锰八面体分子筛上吸附的TAP研究

利用产物瞬时分析反应器中进行的单脉冲实验, 考察了393～493 K温度范围内CO在Ag掺杂的氧化锰八面体分子筛上的吸附行为. 实验表明: CO在催化剂表面发生化学吸附, 并与晶格氧反应生成CO₂. 通过对该过程反应物及产物脉冲响应曲线的模拟, 得到了各基元反应的动力学参数. CO和CO₂在该催化剂表面的脱附活化能分别为83和31 kJ/mol, CO与晶格氧的反应活化能为116 kJ/mol.     

Surface Charge Changes upon Formation of the Signaling State in Visual Rhodopsin†

The cytoplasmic surface of G protein‐coupled receptors plays a central role for activation and deactivation of the receptor. To understand the molecular mechanisms which underlie these processes, we determined the surface charge density and its changes upon activation directly at the cytoplasmic surface of bovine rhodopsin and correlated these changes with key events in receptor activation. The surface charge density was calculated from the ionic strength dependence of the apparent pK_a of the surface‐bound pH‐indicator dye fluorescein according to the Gouy‐Chapman theory. The surface charge density at pH 6.5 changes by 0.8 ± 0.2 elementary charge/1000 Ų in rod outer segment disk membranes and by 0.4 ± 0.2 elementary charge/1000 Ų in rhodopsin/dodecylmaltoside micelles upon formation of the active metarhodopsin‐II state. By comparison of these surface charge density values determined with and without the native lipid environment, we calculated the charge change to about 1 elementary charge/cytoplasmic rhodopsin surface. The more positive surface charge density in metarhodopsin‐II decreases back to the dark state level of σ = ?2.0 ± 0.2 elementary charges/1000 Ų in the opsin state, providing further evidence that the cytoplasmic surface properties after metarhodopsin‐II decay resemble almost those of the dark state.     

Enantioselective Allylic Oxidation of Olefins Using Chiral Quinolinyl‐oxazoline Copper Complex Catalysts

Copper complexes of chiral quinolinyl‐oxazoline have been studied as the catalysts for enantioselective allylic oxidation of cycloalkenes with tert‐butyl perbenzoate. Using 5 mol% of these chiral catalysts, optical active allylic benzoates were obtained in moderate enantiomeric excesses. CuOTf prepared in situ, CuClO₄ and CuPF₆ were found to be good precatalysts in acetone.     

Heterogeneous Wheel‐Shaped Cu20‐Polyoxotungstate [Cu20Cl(OH)24(H2O)12(P8W48O184)]25− Catalyst for Solvent‐Free Aerobic Oxidation of n‐Hexadecane

The selective oxidation of alkanes as a green process remains a challenging task because partial oxidation is easier to achieve with sacrificial oxidants, such as hydrogen peroxide, alkyl hydroperoxides or iodosylbenzene, than with molecular oxygen or air. Here, we report on a heterogeneous catalyst for n‐hexadecane oxidation comprised of the wheel shaped Cu₂₀‐polyoxotungstate [Cu₂₀Cl(OH)₂₄(H₂O)₁₂(P₈W₄₈O₁₈₄)]^25? anchored on 3‐aminopropyltriethoxysilane (apts)‐modified SBA‐15. The catalysts were characterized by powder X‐ray diffraction (XRD), N₂‐adsorption measurements and Fourier transform infrared reflectance (FT‐IR) spectroscopy. The heterogeneous Cu₂₀‐polyanion system catalyzed the solvent‐free aerobic oxidation of n‐hexadecane to alcohols and ketones by using air as the oxidant under ambient conditions. The catalyst exhibits an exceptionally high turn over frequency (TOF) of 20 000 h^?1 at 150 °C and is resistant to poisoning by CS₂. Moreover, it can be easily recovered and reused by filtration without loss of its catalytic activity. Possible homogeneous contributions also have been examined and eliminated. Thus, this system can use air as oxidant, which, in combination with its good overall performance and poison tolerance, raises the prospect of this type of heterogeneous catalyst for practical applications.     

A Biomimetic Pathway for Vanadium‐Catalyzed Aerobic Oxidation of Alcohols: Evidence for a Base‐Assisted Dehydrogenation Mechanism

The first step in the catalytic oxidation of alcohols by molecular O₂, mediated by homogeneous vanadium(V) complexes [LV^V(O)(OR)], is ligand exchange. The unusual mechanism of the subsequent intramolecular oxidation of benzyl alcoholate ligands in the 8‐hydroxyquinolinato (HQ) complexes [(HQ)₂V^V(O)(OCH₂C₆H₄‐p‐X)] involves intermolecular deprotonation. In the presence of triethylamine, complex 3 (X=H) reacts within an hour at room temperature to generate, quantitatively, [(HQ)₂V^IV(O)], benzaldehyde (0.5 equivalents), and benzyl alcohol (0.5 equivalents). The base plays a key role in the reaction: in its absence, less than 12 % conversion was observed after 72 hours. The reaction is first order in both 3 and NEt₃, with activation parameters ΔH^≠=(28±4) kJ mol^?1 and ΔS^≠=(?169±4) J K^?1 mol^?1. A large kinetic isotope effect, 10.2±0.6, was observed when the benzylic hydrogen atoms were replaced by deuterium atoms. The effect of the para substituent of the benzyl alcoholate ligand on the reaction rate was investigated using a Hammett plot, which was constructed using σ_p. From the slope of the Hammett plot, ρ=+(1.34±0.18), a significant buildup of negative charge on the benzylic carbon atom in the transition state is inferred. These experimental findings, in combination with computational studies, support an unusual bimolecular pathway for the intramolecular redox reaction, in which the rate‐limiting step is deprotonation at the benzylic position. This mechanism, that is, base‐assisted dehydrogenation (BAD), represents a biomimetic pathway for transition‐metal‐mediated alcohol oxidations, differing from the previously identified hydride‐transfer and radical pathways. It suggests a new way to enhance the activity and selectivity of vanadium catalysts in a wide range of redox reactions, through control of the outer coordination sphere.     

Half‐sandwich Ir (III) and Rh (III) complexes as catalysts for water oxidation with double‐site

A series of neutral binuclear iridium and rhodium complexes were synthesized based on bis‐imine ligands under mild conditions. These half‐sandwich late transition metal complexes were isolated in good yields and characterized by elemental analysis, ¹H NMR, ¹³C NMR, HR‐MS, and FT‐IR spectroscopies, and the solid state structure of complexes 1 and 2 were further confirmed by single‐crystal X‐ray diffraction. Cyclic voltammetry (CV) characterization indicated that the complex 1 has the best catalyst for water oxidation process with TOF of 0.8 s^?1 at low overpotential of 0.325 V in methanol‐phosphate buffer. The proposed double‐site water oxidation mechanism had been also speculated .     

DFT Simulations of Water Adsorption and Activation on Low‐Index α‐Ga2O3 Surfaces

Density functional theory (DFT) calculations are used to explore water adsorption and activation on different α‐Ga₂O₃ surfaces, namely (001), (100), (110), and (012). The geometries and binding energies of molecular and dissociative adsorption are studied as a function of coverage. The simulations reveal that dissociative water adsorption on all the studied low‐index surfaces are thermodynamically favorable. Analysis of surface energies suggests that the most preferentially exposed surface is (012). The contribution of surface relaxation to the respective surface energies is significant. Calculations of electron local density of states indicate that the electron‐energy band gaps for the four investigated surfaces appears to be less related to the difference in coordinative unsaturation of the surface atoms, but rather to changes in the ionicity of the surface chemical bonds. The electrochemical computation is used to investigate the hydrogen evolution reaction (HER) and the oxygen evolution reaction (OER) on α‐Ga₂O₃ surfaces. Our results indicate that the (100) and (110) surfaces, which have low stability, are the most favorable ones for HER and OER, respectively.     

Catalytic Asymmetric Three‐component Hydroacyloxylation/ 1,4‐Conjugate Addition of Ynamides

A highly enantioselective three‐component hydroacyloxylation/1,4‐conjugate addition of ortho‐hydroxybenzyl alcohols, ynamides and carboxylic acids was developed under mild reaction conditions in the presence of a chiral N,N′‐dioxide/Sc(OTf)₃ complex, which went through in situ generated ortho‐quinone methides with α‐acyloxyenamides, delivering a range of corresponding chiral α‐acyloxyenamides derivatives containing gem(1,1)‐diaryl skeletons in moderate to good yields with excellent ee values. The scale‐up experiment and further derivation showed the practicality of this catalytic system. In addition, a possible catalytic cycle and transition state model was proposed to elucidate the origin of the stereoselectivity based on X‐ray crystal structure of the α‐acyloxyenamide intermediate and product.     

Copper(II) and Sodium(I) Complexes based on 3,7‐Diacetyl‐1,3,7‐triaza‐5‐phosphabicyclo[3.3.1]nonane‐5‐oxide: Synthesis,Characterization, and Catalytic Activity

The reaction of 3,7‐diacetyl‐1,3,7‐triaza‐5‐phosphabicyclo[3.3.1]nonane (DAPTA) with metal salts of Cu^II or Na^I/Ni^II under mild conditions led to the oxidized phosphane derivative 3,7‐diacetyl‐1,3,7‐triaza‐5‐phosphabicyclo[3.3.1]nonane‐5‐oxide (DAPTA=O) and to the first examples of metal complexes based on the DAPTA=O ligand, that is, [Cu^II(μ‐CH₃COO)₂(κO‐DAPTA=O)]₂ ( 1 ) and [Na(1κOO′;2κO‐DAPTA=O)(MeOH)]₂(BPh₄)₂ ( 2 ). The catalytic activity of 1 was tested in the Henry reaction and for the aerobic 2,2,6,6‐tetramethylpiperidin‐1‐oxyl (TEMPO)‐mediated oxidation of benzyl alcohol. Compound 1 was also evaluated as a model system for the catechol oxidase enzyme by using 3,5‐di‐tert‐butylcatechol as the substrate. The kinetic data fitted the Michaelis–Menten equation and enabled the obtainment of a rate constant for the catalytic reaction; this rate constant is among the highest obtained for this substrate with the use of dinuclear Cu^II complexes. DFT calculations discarded a bridging mode binding type of the substrate and suggested a mixed‐valence Cu^II/Cu^I complex intermediate, in which the spin electron density is mostly concentrated at one of the Cu atoms and at the organic ligand.     

Two‐Dimensional Spatial Resolution of Concentration Profiles in Catalytic Reactors by Planar Laser‐Induced Fluorescence: NO Reduction over Diesel Oxidation Catalysts

Planar laser‐induced fluorescence (PLIF) enables noninvasive in situ investigations of catalytic flow reactors. The method is based on the selective detection of two‐dimensional absolute concentration maps of conversion‐relevant species in the surrounding gas phase inside a catalytic channel. Exemplarily, the catalytic reduction of NO with hydrogen (2 NO+5 H₂→2 H₂O+2 NH₃) is investigated over a Pt/Al₂O₃ coated diesel oxidation catalyst by NO PLIF inside an optically accessible channel reactor. Quenching‐corrected 2D concentration maps of the NO fluorescence above the catalytic surface are obtained under both, nonreactive and reactive conditions. The impact of varying feed concentration, temperature, and flow velocities on NO concentration profiles are investigated in steady state. The technique presented has a high potential for a better understanding of interactions of mass transfer and surface kinetics in heterogeneously catalyzed gas‐phase reactions.     

Surface Dynamics of A Vanadyl Pyrophosphate Catalyst for n‐Butane Oxidation to Maleic Anhydride: An In Situ Raman and Reactivity Study of the Effect of the P/V Atomic Ratio

This work focused on investigating the effect of the P/V atomic ratio in vanadyl pyrophosphate, catalyst for n‐butane oxidation to maleic anhydride, on the nature of the catalytically active phase. Structural transformations occurring on the catalyst surface were investigated by means of in situ Raman spectroscopy in a non‐reactive atmosphere, as well as by means of steady‐state and non‐steady‐state reactivity tests, in response to changes in the reaction temperature. It was found that the nature of the catalyst surface is affected by the P/V atomic ratio even in the case of small changes in this parameter. With the catalyst having P/V equal to the stoichiometric value, a surface layer made of α_I‐VOPO₄ developed in the temperature interval 340–400 °C in the presence of air; this catalyst gave a very low selectivity to maleic anhydride in the intermediate T range (340–400 °C). However, at 400–440 °C δ‐VOPO₄ overlayers formed; at these conditions, the catalyst was moderately active but selective to maleic anhydride. With the catalyst containing a slight excess of P, the ratio offering the optimal catalytic performance, δ‐VOPO₄ was the prevailing species over the entire temperature range investigated (340–440 °C). Analogies and differences between the two samples were also confirmed by reactivity tests carried out after in situ removal and reintegration of P. These facts explain why the industrial catalyst for n‐butane oxidation holds a slight excess of P; they also explain discrepancies registered in the literature about the nature of the active layer in vanadyl pyrophosphate.     

Photoinduced Energy Transfer from Poly(N‐vinylcarbazole) to Tricarbonylchloro‐(2,2′‐bipyridyl)rhenium(I)

This work investigates the photoinduced energy transfer from poly(N‐vinylcarbazole) (PVK), as a donor material, to fac‐(2,2′‐bipyridyl)Re(CO)₃Cl, as a catalyst acceptor, for its potential application towards CO₂ reduction. Photoluminescence quenching experiments reveal dynamic quenching through resonance energy transfer in solid donor/acceptor mixtures and in solid/liquid systems. The bimolecular reaction rate constant at solution–film interfaces for the elementary reaction of the excited state with the quencher material could be determined as 8.8(±1.4)×10¹¹ L mol^?1 s^?1 by using Stern–Volmer analysis. This work shows that PVK is an effective and cheap absorber material that can act efficiently as a redox photosensitizer in combination with fac‐(2,2′‐bipyridyl)Re(CO)₃Cl as a catalyst acceptor, which might lead to possible applications in photocatalytic CO₂ reduction.     

Visible‐Light‐Induced Photoredox Catalysis of Dye‐Sensitized Titanium Dioxide: Selective Aerobic Oxidation of Organic Sulfides

TiO₂ photoredox catalysis has recently attracted much interest for use in performing challenging organic transformations under mild reaction conditions. However, the reaction scheme is hampered by the fact that TiO₂ can only be excited by UV light of wavelengths λ shorter than 385 nm. One promising strategy to overcome this issue is to anchor an organic, preferably metal‐free dye onto the surface of TiO₂. Importantly, we observed that the introduction of a catalytic amount of the redox mediator TEMPO [(2,2,6,6‐tetramethylpiperidin‐1‐yl)oxyl] ensured the stability of the anchored dye, alizarin red S, thereby resulting in the selective oxidation of organic sulfides with O₂. This result affirms the essential role of the redox mediator in enabling the organic transformations by visible‐light photoredox catalysis.