Novel N,N＇-Diacylhydrazine-Based Colorimetric Receptors for Selective Sensing of Fluoride and Acetate Anions

Three novel and simple N,N＇-diacylhydrazine-based colorimetric receptors have been prepared. The binding properties of the receptors to anions such as F^-, Cl^-, Br^-, AcO^-, HSO4^- and HEPO4^- in acetonitrile solution were examined by UV-Vis spectroscopy methods, which show high sensitivity and selectivity to F^- and AcO^- over other anions. The results indicated that a 1 ： 1 stoichiometry complex was formed between the receptors and the anions, while ^1H NMR titrations confirmed hydrogen binding interaction between the receptors and the anions.     

Synthesis,Physical Properties,and Anion Recognition of Two Novel Larger Azaacenes: Benzannelated Hexazaheptacene and Benzannelated N,N′‐Dihydrohexazaheptacene

Two novel larger azaacenes with six or ten N atoms in their backbones, benzannelated 9,11,13,22,24,26‐hexazatetrabenzo[a,c,l,n]heptacene ( HATBH , 1 ) and benzannelated 9,26‐dihydro‐9,11,13,22,24,26‐hexaza‐tetrapyrido[3,2‐a: 2′,3′‐c: 3′′,2′′‐l: 2′′′,3′′′‐n]heptacene ( DHATPH, 2 ), have been successfully synthesized in two steps. The theoretical band gaps estimated through DFT calculations for HATBH ( 1 ) and DHATPH ( 2 ) are 1.949 eV and 2.278 eV, which are close to the experimentally obtained optical band gaps (2.14 eV and 2.39 eV). Interestingly, HATBH ( 1 ) can act as efficient anion sensor for F^? and H₂PO₄^?, while DHATPH ( 2 ) selectively responds to F^? among the ten different anions used (F^?, Cl^?, Br^?, I^?, PF₆^?, HSO₄^?, NO₃^?, BF₄^?, AcO^?, and H₂PO₄^?). Our synthetic strategy could offer a promising and easy way to obtain even larger azaacenes.     

A Fluorescent Chemosensor for Dihydrogen Phosphate Ion Based on 2‐[2‐Hydroxy‐4‐(diethylamino) phenyl]‐1H‐imidazo[4,5‐b]phenazine‐Fe3+ Ensemble

A long wavelength emission fluorescent (612 nm) chemosensor with high selectivity for H₂PO₄^? ions was designed and synthesized according to the excited state intramolecular proton transfer (ESIPT). The sensor can exist in two tautomeric forms ('keto' and 'enol') in the presence of Fe³⁺ ion, Fe³⁺ may bind with the 'keto' form of the sensor. Furthermore, the in situ generated GY‐Fe³⁺ ensemble could recover the quenched fluorescence upon the addition of H₂PO₄^? anion resulting in an off‐on‐type sensing with a detection limit of micromolar range in the same medium, and other anions, including F^?, Cl^?, Br^?, I^?, AcO^?, HSO₄^?, ClO₄^? and CN^? had nearly no influence on the probing behavior. The test strips based on 2‐[2‐hydroxy‐4‐(diethylamino) phenyl]‐1H‐imidazo[4,5‐b]phenazine and Fe³⁺ metal complex ( GY‐Fe³⁺ ) were fabricated, which could act as convenient and efficient H₂PO₄^? test kits.     

Determination Limit of Fluorescence Turn‐On Probes for the Acetate Anion

Three fluorescent turn‐on probes containing 3,6‐dichloro‐9H‐carbazole as carbazyl part have been designed and synthesized. Among studied anions F^?, AcO^?, H₂PO , Cl^?, Br^? and I^?, AcO^? showed the strongest binding ability with all probes. The strong basic anions, such as AcO^?, H₂PO , and F^?, induced a significant red‐shift in absorption and a concomitant increase in fluorescent emission of the probes caused by photoinduced electron transfer (PET). The determination limit of probe 3 (Scheme 1) toward AcO^? is 3.0×10^?7 M . ¹H‐NMR Titration experiments shed light on the nature of the interaction between the probes and the anions. Theoretical investigation further illustrated the possible binding mode in these host? guest interactions and the roles of molecular frontier orbitals in molecular interplay.     

A Series of Amino Acid Functionalized Tripodal Hexaamide Anion Receptors: Ion‐Pair‐Assisted Capped‐Cleft Formation by a Pentafluorophenyl‐Functionalized Amide

A new series of tris(2‐aminoethyl)amine (tren)‐based L ‐alanine amino acid backboned tripodal hexaamide receptors (L1–L5) with various attached moieties based on electron‐withdrawing fluoro groups and lipophilicity have been synthesized and characterized. Detailed binding studies of L1–L5 with different anions, such as halides (F^?, Cl^?, Br^?, and I^?) and oxyanions (AcO^?, BzO^? (Bz=benzoyl), NO₃^?, H₂PO₄^?, and HSO₄^?), have been carried out by isothermal titration calorimetric (ITC) experiments in acetonitrile/dimethylsulfoxide (99.5:0.5 v/v) at 298 K. ITC titration experiments have clearly shown that receptors L1–L4 invariably form 1:1 complexes with Cl^?, AcO^?, BzO^?, and HSO₄^?, whereas L5 forms a 1:1 complex only with AcO^?. In the case of Br^?, I^?, and NO₃^?, no appreciable heat change is observed owing to weak interactions between these anions and receptors; this is further confirmed by ¹H NMR spectroscopy. The ITC binding studies of F^? and H₂PO₄^? do not fit well for a 1:1 binding model. Furthermore, ITC binding studies also revealed slightly higher selectivity of this series of receptors towards AcO^? over Cl^?, BzO^?, and HSO₄^?. Solid‐state structural evidence for the recognition of Cl^? by this new category of receptor was confirmed by single‐crystal X‐ray structural analysis of the complex of tetrabutylammonium chloride (TBACl) and L1. Single‐crystal X‐ray diffraction clearly showed that the pentafluorophenyl‐functionalized amide receptor (L1) encapsulated Cl^? in its cavity by hydrogen bonds from amides, and the cavity of L1 was capped with a TBA cation through hydrogen bonding and ion‐pair interactions to form a capped‐cleft orientation. To understand the role of the cationic counterpart in solution‐state Cl^? binding processes with this series of receptors (L1–L4), a detailed Cl^? binding study was carried out with three different tetraalkylammonium (Me₄N⁺, Et₄N⁺, and Bu₄N⁺) salts of Cl^?. The binding affinities of these receptors with different tetralkylammonium salts of Cl^? gave binding constants with the TBA cation in the following order: butyl>ethyl>methyl. This study further supports the role of the TBA countercation in ion‐pair recognition by this series of receptors.     

Synthesis of Novel Anionic Receptors with （Thio）urea and Amide Binding Sites and the Recognition Properties for Anions

IntroductionSincemoreandmoreanionsplayanimportantroleinbiologicalandchemicalprocesses ,thedesignandsynthe sisofreceptorsforon lineandrealtimedetectionofbio logicallyimportantanions ,andforenvironmentalmonitor ingofharmfulanionpollutantshaveattractedparticularat tentioninsupramolecularchemistry .1Thebasicstrategyfortheconstructionofanion bindingreceptorsistoexploitthereceptorsthathaveelectrostatic ,2 hydrogenbonding ,3orLewisacidiccentralinteraction .4 Amongavarietyofnon covalentinteractions ,h…     

Anion Recognition Using Novel and Colorimetric Tweezer Receptors:1,3-Phenylenedi(carbonylhydrazone) in Aqueous-organic Binary Solvents

本文设计合成了2种新型的间苯二甲酰腙类钳形受体。在DMSO和DMSO-H2O混合溶液中,通过紫外可见光谱分别考察了受体分子3a对F-, Cl-, Br-, I-, AcO-, HSO4-, H2PO4-和ClO4-的相互作用。结果表明,在DMSO溶液中,受体3a对F-,CH3COO-和H2PO4-有显著识别效果,溶液颜色由无色变为黄色,实现裸眼检测。在15%H2O-85%DMSO含水体系中,3a可高选择性识别CH3COO-。1H NMR滴定表明过量F-的加入使受体分子3a发生脱质子作用,探讨了主客体之间的作用机理。并直接用于水相中无机醋酸盐的直接显色检测。     

Novel Fluorescent Chemosensor for Detection of F− Anions Based on a Single Functionalized Pillar[5]arene Iron(III) Complex

Novel fluorescent chemosensor with good selectivity for F^? anion was designed and synthesized. The sensor has a bearing on a single functionalized pillar[5]arene and Fe³⁺ metal complex (PN‐Fe), which showed prominent fluorescent response for F^? anion over other common anions (Cl^?, Br^?, I^?, AcO^?, HSO4^?, H₂PO₄^?, ClO₄^?, CN^? and SCN^?). These results were evaluated by fluorescent method. The detection limit of PN‐Fe to F^? was calculated to be 2.50×10^?7 mol/L. Moreover, the sensor PN‐Fe³⁺ might serve as a recyclable component in sensing materials.     

Polymer Complexes: supramolecular assemblies and structures of poly[N‐(2′‐pyridyl)propenamide] complexes

A number of new polymer complexes of palladium(II), platinum(II) and copper(II) containing homopolymer (N‐(2′‐pyridyl)propenamide; APH) and various anions (Cl^?, Br^?, I^? or NO₃^?) have been synthesized and characterized by elemental analyses, magnetic susceptibility, electron paramagnetic resonance, IR and reflectance spectral measurements. The homopolymer shows three types of coordination behavior. In the mononuclear polymer complexes 1–6 and 9 it acts as a neutral bidentate ligand chelated through the pyridine‐nitrogen and amide‐oxygen atoms, whereas in the square‐planar [Pd(APH)₂X₂] (X = Cl, Br) unidentate APH is coordinated through the pyridine‐nitrogen atom alone. Under alkaline conditions APH is deprotonated in the presence of palladium(II) to form [Pd(AP)₂] ( 10 ), AP being an anionic bidentate ligand and chelating through the pyridine‐nitrogen and amide‐oxygen atoms. The poly‐chelates are of 1:1 and 1:3 (metal:homopolymer) stoichiometry and exhibit six‐coordination. The polymer complexes of stoichiometric [(APH)₂CuX₂] contain square planar (APH)₂ Cu²⁺ units and the anions X^? are in the axial positions, giving distorted octahedral configurations. From the electron paramagnetic resonance and spectral data, the orbital reduction factors were calculated. Copyright © 2004 John Wiley & Sons, Ltd.     

Synthesis,Bioactivity, and the Anion‐Binding Property of 2‐Sulfydryl‐1,3,4‐thiodiazole Derivatives

Two new compounds ( 1 and 2 ) containing 2‐sulfydryl‐1,3,4‐thiodiazole have been synthesized and optimized. They both showed wide antibacterial activity for colon bacillus, Staphylococcus aureus, S. albus, dysentery bacillus and inferior activity for Bacillus subtilis. In addition, their binding properties were evaluated for biologically important anions (F^–, Cl^–, Br^–, I^–, AcO^–, and H₂PO₄^–) by theoretical investigation, UV–vis, fluorescence, and ¹H NMR titration experiments, and they displayed strong binding ability for H₂PO₄^– without the interference of other anions tested. Especially the binding ability of compound 2 containing anthracene with H₂PO₄^– was 1000 times stronger than that of compound 1 containing nitrobenzene. Two compounds based on 2‐sulfydryl‐1,3,4‐thiodiazole have both properties of anion recognition and antibacterial activity.     

Synthesis and evaluation of neutral anion receptors based on acylhydrazide-appended calix[4]arenes

A new class of neutral receptors based upon acylhydrazide-appended calix[4]arenes was synthesised and evaluated for recognition of anions. Detailed NMR and single-crystal X-ray analyses of one of the synthesised compounds reveal that anion recognition in such derivatives is achieved through cooperative hydrogen bond interactions. The presence of three centred NH–O and two OH–O hydrogen bonds at the lower rim of the synthesised calixarene architecture apparently helps the molecular scaffold to retain cone conformation to enable deployment of intermolecular hydrogen bonds for selective recognition of HSO₄ ^? ion in preference to F^?, Cl^?, Br^?, I^?, ClO₄ ^?, AcO^? and PF₆ ^? ions.     

A Benzodithiophene‐Based Fluorescence Probe for Rapid Detection of Fluoride Ion

A novel and simple fluorescence probe was synthesized from benzo[1,2‐b:4,5‐b′]dithiophene (BDT) and trimethylsilylethyne via Sonogashira reaction, and showed highly selective and sensitive fluorescence decreasing response towards F^?. The probe molecule turned to a weakly fluorescent terminal alkyne moiety because its trimethylsilyl (TMS) group was cleaved by fluoride, which was proved by ¹H NMR titration. Whereas no distinct fluorescent changes were observed with the addition of other anions, such as Cl^?, Br^?, I^?, AcO^? and H₂PO₄^?. Upon the addition of F^?, the maximum fluorescence emission wavelength shifted from 460 nm to 450 nm with a decrease of fluorescence intensity by 40% within 20 s. Moreover, the detection limit towards F^? was calculated to be as low as 73.5 nmol/L.     

A novel colorimetric and fluorometric anion sensor based on BODIPY-calix[4]pyrrole conjugate

A novel fluorescent anion sensor 1 based on boradiazaindacenes (BODIPY) derivative was synthesized and its absorption and fluorescence properties were investigated in various solvents. 1 exhibited a red shift of absorption spectrum and fluorescence quenching in varying degree in the presence of F^?, AcO^?, H₂PO₄ ^? and Cl^? due to multiple hydrogen bonding interactions between these anions and calix[4]pyrrole receptor. As an anion sensor in the visible region, 1 displayed the similar selectivity and sensitivity toward anions compared to the parent calix[4]pyrrole. However, 1 can be used as an effective dual responsive optical sensor for F^? via chromogenical and fluorogenical signals.     

Investigation of Large Polychloride Anions: [Cl11]−, [Cl12]2−, and [Cl13]−

For decades the chemistry of polyhalides was dominated by polyiodides and more recently also by an increasing number of polybromides. However, apart from a few structures containing trichloride anions and a single report on an octachloride dianion, [Cl₈]^2?, polychlorine compounds such as polychloride anions are unknown. Herein, we report on the synthesis and investigation of large polychloride monoanions such as [Cl₁₁]^? found in [AsPh₄][Cl₁₁], [PPh₄][Cl₁₁], and [PNP][Cl₁₁]?Cl₂, and [Cl₁₃]^? obtained in [PNP][Cl₁₃]. The polychloride dianion [Cl₁₂]^2? has been obtained in [NMe₃Ph]₂[Cl₁₂]. The novel compounds have been thoroughly characterized by NMR spectroscopy, single‐crystal Raman spectroscopy, and single‐crystal X‐ray diffraction. The assignment of their spectra is supported by molecular and periodic solid‐state quantum‐chemical calculations.     

Complexation Properties of N,N′,N″,N′′′‐[1,4,7,10‐Tetraazacyclododecane‐1,4,7,10‐tetrayltetrakis(1‐oxoethane‐2,1‐diyl)]tetrakis[glycine] (H4dotagl). Equilibrium,Kinetic, and Relaxation Behavior of the Lanthanide(III) Complexes

Eu³⁺, Dy³⁺, and Yb³⁺ complexes of the dota‐derived tetramide N,N′,N″,N′′′‐[1,4,7,10‐tetraazacyclododecane‐1,4,7,10‐tetrayltetrakis(1‐oxoethane‐2,1‐diyl)]tetrakis[glycine] (H₄dotagl) are potential CEST contrast agents in MRI. In the [Ln(dotagl)] complexes, the Ln³⁺ ion is in the cage formed by the four ring N‐atoms and the amide O‐atom donor atoms, and a H₂O molecule occupies the ninth coordination site. The stability constants of the [Ln(dotagl)] complexes are ca. 10 orders of magnitude lower than those of the [Ln(dota)] analogues (H₄dota=1,4,7,10‐tetraazacyclododecane‐1,4,7,10‐tetraacetic acid). The free carboxylate groups in [Ln(dotagl)] are protonated in the pH range 1–5, resulting in mono‐, di‐, tri‐, and tetraprotonated species. Complexes with divalent metals (Mg²⁺, Ca²⁺, and Cu²⁺) are also of relatively low stability. At pH>8, Cu²⁺ forms a hydroxo complex; however, the amide H‐atom(s) does not dissociate due to the absence of anchor N‐atom(s), which is the result of the rigid structure of the ring. The relaxivities of [Gd(dotagl)] decrease from 10 to 25°, then increase between 30–50°. This unusual trend is interpreted with the low H₂O‐exchange rate. The [Ln(dotagl)] complexes form slowly, via the equilibrium formation of a monoprotonated intermediate, which deprotonates and rearranges to the product in a slow, OH^?‐catalyzed reaction. The formation rates are lower than those for the corresponding Ln(dota) complexes. The dissociation rate of [Eu(dotagl)] is directly proportional to [H⁺] (0.1–1.0M HClO₄); the proton‐assisted dissociation rate is lower for [Eu(H₄dotagl)] (k₁=8.1?10^?6 M ^?1 s^?1) than for [Eu(dota)] (k₁=1.4?10^?5 M ^?1 s^?1).     

Synthesis and electrochemical properties of calix[4]arene derivatives containing ferrocene units in the cone and 1,3-alternate conformation

Two novel calix[4]arene receptors containing ferrocene units in cone (L₁) and 1,3-alternate (L₂) conformations have been synthesized from 25,27-dihydroxy-26,28-bis[(3-aminopropyl)oxy]calix[4]arene 4 or 25,26,27,28-tetra[(3-aminopropyl)oxy]calix[4]arene 6 and ferrocenecarboxaldehyde via condensation, respectively. Their structures have been characterized by ¹H, ¹³C, APT, COSY NMR, FTIR, HSMR, and UV–vis spectral data. The electrochemical behavior of L₁ and L₂ has been investigated in the presence of F^?, Cl^?, Br^?, H₂PO₄^?, CH₃COO^? anions. Electrochemical studies show that these receptors electrochemically recognize CH₃COO^?, H₂PO₄^?, and Cl^?, anions. Using an UV–vis study, the selectivity to these anions in DMSO solution was confirmed.     

2,2′‐Bipyridinium bis(perchlorate)

The title compound, [H₂bipy](ClO₄)₂ or C₁₀H₁₀N₂²⁺·2ClO₄^?, was obtained at the interface between an organic (2,2′‐bi­pyridine in methanol) and an aqueous phase (perchloric acid in water). The compound crystallizes in space group P and comprises discrete diprotonated trans‐bipyridinium cations, [H₂bipy]²⁺, and ClO₄^? anions. The cations and anions are connected through N—H?O and C—H?O hydrogen bonds [distances N?O 2.817 (4) and 2.852 (4) Å, and C?O 3.225 (6)–3.412 (5)Å]. The C—C bond distance between the two rings is 1.452 (5) Å. The bipyridinium cation has a trans conformation and the N—C—C—N torsion angle is 152.0 (3)°.     

Novel Hydrazone‐Based Tripodal Sensors: Single Selective Colorimetric Chemosensor for Acetate in Aqueous Solution

A series of novel tripodal colorimetric anion sensors based on hydrazone CHN NH groups have been synthesized and their recognition behavior with anionic guests has been studied. In DMSO solutions, sensors 1 and 2 show colorimetric responses for F⁻, H₂PO⁻₄ and AcO⁻, while in DMSO/H₂O (9:1, V/V) solutions, sensor 1 shows single selectivity for AcO⁻. ¹H NMR titration confirms that the tripodal sensors could bind anions through the collaboration of three hydrazone groups and anions residing in the central cavity of the sensors.     

Polymer‐based fluoride‐selective chemosensor: Synthesis,sensing property,and its use for the design of molecular‐scale logic devices

A new styryl‐type monomer, 2‐(4‐vinylbenzyloxy)‐1 ‐naphthaldehyde thiosemicarbazone (VNT), was synthesized and then copolymerized with methyl methacrylate (MMA) by reversible addition fragmentation chain transfer polymerization affording a series of poly(MMA‐co‐VNT)s with different functional unit content, predetermined molecular weight, and narrow molecular‐weight distribution. The desired copolymers were structurally confirmed by various spectroscopic characterizations. Colorimetric and fluorescent titration spectra revealed that the copolymers are highly selective toward fluoride anions over other competitive species including Cl^?, Br^?, I^?, H₂PO₄^?, AcO^?, and HSO₄^?. On addition of F^?, a remarkable colorless‐to‐yellow color change is easily observed by naked eyes. The influence of the copolymer composition and molecular weight on its sensing capacity was then carefully investigated. The results showed that higher VNT‐incorporation amount within the copolymer chains leads to higher sensitivity toward F^? ions. Interestingly, the chromogenic process of the polymeric sensor can be switched back and forth by successively adding F^? and HSO₄^? anions into the dimethyl sulfoxide solution of the polymer, which may be represented by a complementary “IMPLICATION/INHIBIT” logic gate at molecular level using both the ions as the chemical inputs. Based on such a reversible and reproducible sensing system, we designed a molecular‐scale sequential information processing circuit displaying “writing–reading–erasing–reading” behavior and “multiwrite” function in the form of binary logic. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011