Synthesis of Isatin and 5-Bromoisatin Derivatives

New N-derivatives of isatin were synthesized by treating ethyl chloroacetate, N-(2-chloroethyl)morpholine, and 1,4-di(chloromethyl)benzene with isatin sodium salt. N-Derivatives of isatin and 5-bromoisatin were also prepared by Mannich reaction.     

Cross‐Aldol Reaction of Isatin with Acetone Catalyzed by Leucinol: A Mechanistic Investigation

Comprehensive mechanistic studies on the enantioselective aldol reaction between isatin ( 1 a ) and acetone, catalyzed by L ‐leucinol ( 3 a ), unraveled that isatin, apart from being a substrate, also plays an active catalytic role. Conversion of the intermediate oxazolidine 4 into the reactive syn‐enamine 6 , catalyzed by isatin, was identified as the rate‐determining step by both the calculations (ΔG^≠=26.1 kcal mol^?1 for the analogous L ‐alaninol, 3 b ) and the kinetic isotope effect (k_H/k_D=2.7 observed for the reaction using [D₆]acetone). The subsequent reaction of the syn‐enamine 6 with isatin produces (S)‐ 2 a (calculated ΔG^≠=11.6 kcal mol^?1). The calculations suggest that the overall stereochemistry is controlled by two key events: 1) the isatin‐catalyzed formation of the syn‐enamine 6 , which is thermodynamically favored over its anti‐rotamer 7 by 2.3 kcal mol^?1; and 2) the high preference of the syn‐enamine 6 to produce (S)‐ 2 a on reaction with isatin ( 1 a ) rather than its enantiomer (ΔΔG^≠=2.6 kcal mol^?1).     

Novel Azo‐Dyes‐Modified Isatin Derivatives: Synthesis,UV/VIS Spectroscopic,and Electrochemical Study

A high‐yield and simple synthesis of certain aminomethylisatins bearing dye fragments via the Mannich reaction of isatin with amino‐containing azobenzenes was reported. It was found that the absence of electron‐donating groups in azo‐dye molecule prevents aminomethylation of isatin. The effect of the incorporation of an isatin moiety with an azobenzene dye in one molecule on its absorption and electrochemical behavior was studied using UV spectroscopy and cyclic voltammetry.     

Temporary Intramolecular Generation of Pyridine Carbenes in Metal‐Free Three‐Component C?H Bond Functionalisation/Aryl‐Transfer Reactions

Nucleophilic addition of pyridines to benzyne generates zwitterionic adducts that evolve by a rapid intramolecular proton shift to produce the corresponding pyridine carbenes, N‐phenyl pyrid‐2‐ylidenes. In the presence of electrophilic ketones (isatin derivatives), the pyridylidenes can further react by an original bis‐arylation reaction of the carbonyl compounds involving a formal pyridine C? H bond functionalisation. The overall transformation is an unprecedented three‐component reaction featuring a carbene intermediate. The mechanism of this transformation was examined in detail by using both experimental and theoretical approaches. It was found that the generation of N‐phenyl pyrid‐2‐ylidene from pyridine and benzyne is energetically favoured, and that the corresponding carbene dimer can also form easily. Under the three‐component reaction conditions, the pyridylidene preferentially adds to the ketone group of the isatin derivative to produce a zwitterionic adduct amenable to an intramolecular aryl transfer reaction by a concerted nucleophilic aromatic substitution. This peculiar reactivity for a carbene was compared to possibly competitive known reactions of stable carbenes with carbonyl compounds, and the reaction was found to be under thermodynamic control. The reported method of generation of N‐phenyl pyrid‐2‐ylidenes and their reactivity with carbonyl compounds unlock new perspectives in organic synthesis.     

N-Arylation of isatins. A direct route to N-arylisatoic anhydrides

The synthesis of N-arylisatoic anhydrides 3 has been accomplished by using a two-step process. The key reaction in the sequence is the direct N-arylation of isatin with an aryl bromide in the presence of cupric oxide. Subsequent oxidation of the resulting N-aryl isatin 2 with m-chloroperoxybenzoic acid furnishes the desired products.     

Environmental Friendly Synthesis of Novel Isatin Ketal and Isatin Schiff Base Derivatives Using Michael Addition Reaction under Solvent‐Free Conditions

An efficient and simple procedure for the synthesis of novel isatin derivatives is described. Michael addition of aniline Schiff bases of isatin or p‐toluidine Schiff bases of isatin to fumaric esters affords the Michael adduct compounds in good to high yields in the presence of K₂CO₃ and tetrabutylammonium bromide (TBAB) under solvent‐free conditions. Repeating of this reaction about spiro[1,3‐dioxolane‐2,3′‐indol]‐2′(1′H)‐one, as a Michael donor, in the presence of 1,4‐diazabicyclo[2.2.2]octane (DABCO) gives Michael adducts in remarkable yields under the same conditions.     

One-pot four-component domino reaction for the synthesis of bifunctionalized spiro[indazolo[3,2-b]quinazoline-7,3′-indoline hybrids: A green approach

An efficient tandem route to obtain novel spiro[indazolo[3,2-b]quinazoline-7,3′-indolines has been explored. The one-step domino reaction proceeds via in situ generation of the 1H-indazol-3-amines followed by its reaction with the cyclic 1,3-dicarbonyls and isatin derivatives to furnish complex N-fused spiro-polyheterocyclic frameworks. This protocol describes a valuable route to concisely and feasibly obtain spiro[indazolo[3,2-b]quinazoline-7,3′-indolines from isatin derivatives. The present protocol is particularly attractive because of the following features: group-assisted-purification (GAP) chemistry process, low-cost solvent, convenience of operation, excellent atom economy, and high yields.     

Synthesis of Spiropyrazolines via a Pseudo‐Six Component Reaction

A novel and eco‐friendly route for the synthesis of highly functionalized spiropyrazolines via a pseudo‐six component reaction of hydrazine hydrate, nitro ketene dithioacetal, isatin, and active methylene under mild condition at room temperature in ethanol media has been developed. The key steps in the synthetic strategy involve the formation of 1,1‐dihydrazino‐2‐nitroethylene from hydrazine hydrate with nitro ketene dithioacetal and its reaction with Knoevenagel adduct derived from the corresponding isatin and active methylene. The reaction is particularly attractive due to features such as high bond‐forming efficiency, optimum convergence, mild condition, atom economy, easy work‐up/purification, and reduced waste production without using any additive.     

FeCl3-catalyzed efficient synthesis of di(5-methylfuran/thiophen-2-yl)isatin analogues

A simple, inexpensive, environmentally friendly, and high yield protocol is described for the synthesis of (5-methylfuran/thiophene-2-yl)isatin by the reaction of 2-methylfuran/2-methylthiophene with isatin/isatin imine in the presence of FeCl₃. The present protocol is ideal for the direct introduction of 2-methylfuran/2-methylthiophene onto isatin at 3-position with complete regioselectivity.     

Efficient One‐Pot Synthesis of Spiro[indoline‐3,1′‐pyrazolo[1,2‐b] phthalazine] Derivatives via Three‐Component Reaction

An efficient one‐pot synthesis of spiro[indoline‐3,1′‐pyrazolo[1,2‐b]phthalazine] derivatives via three‐component reaction of phthalhydrazide, isatin, and malononitrile (cyanoacetic ester) is described. This new protocol has the advantages of high efficiency, mild reaction conditions, one‐pot procedure, and convenient operation.     

Improved and Efficient Synthesis of Pyrrolo[2,3,4‐kl]acridin‐1‐one Derivatives under Ultrasound Irradiation

A improved and efficient procedure for the synthesis of pyrrolo[2,3,4‐kl]acridin‐1‐one derivatives via the reaction of isatin and enaminone catalyzed by ceric ammonium nitrate under ultrasonic condition has been developed. Compared with the conventional methods, the remarkable advantages of this method are mild reaction conditions, operational simplicity, higher yield, and shorter reaction times.     

Simple synthetic routes to 5-(3,6-dihydro-2-oxo-2H-1,3,4-thiadiazin-5-yl)-1H-indole-2,3-diones and their Derivatives

Two different synthetic routes to 5-(3,6-dihydro-2-oxo-2H-1,3,4-thiadiazin-5-yl)-1H-indole-2,3-diones are described. The reaction sequences represent a facile entry into these series of isatin derivatives.     

Catalytic Asymmetric [2+3] Cyclizations of Azlactones with Azonaphthalenes

The first catalytic asymmetric [2+3] cyclization of azlactones with azonaphthalenes has been established. This strategy allowed the synthesis of a variety of chiral isatin derivatives in generally good yields and excellent enantioselectivities (up to 99 % yield, 98 % ee). The developed reaction has not only established a catalytic enantioselective [2+3] cyclization using azlactones as two‐carbon building blocks, but also enriches the chemistry of catalytic asymmetric cyclizations of azonaphthalenes. In addition, this protocol will provide a useful method for constructing enantioenriched 3,3′‐disubstituted isatin‐type frameworks.     

Synthesis of Chlorin-Fused Monospirooxindolopyrrolidines Through a Facile [3 + 2]-Cycloaddition of Azomethine Ylides

One-pot synthesis of novel chlorin-fused monospirooxindolopyrrolidines has been accomplished in good yield via a facile [3 + 2]-cycloaddition reaction of azomethine ylides, derived from isatin/N-benzylisatin and sarcosine, with various porphyrin derivatives as dipolarophiles.     

Indigo chemiluminescence

Indigotin in basic solutions of polar aprotic solvents reacts with atmospheric oxygen yielding isatin. The reaction is accompanied by emission of light with a quantum yield equal to 2.6×10^?4 Einstein/mol. The spectral distribution of the indigotin chemiluminescence is that of the isatin fluorescence. Addition of equimolar amounts of isatin to the reaction mixture raises the chemiluminescence quantum yield to 5.3×10^?4 Einstein/mol. A mechanism involving the intermediate formation of indigotin dioxetan is proposed.     

InCl3-Assisted Synthesis of Pyrano[2,3-a]carbazoles via Multicomponent Reaction

A facile, efficient, and environmentally friendly protocol for the synthesis of pyrano[2,3-a]carbazoles has been developed by one-pot multicomponent reaction of benzaldehyde/isatin with malononitrile and 1-hydroxycarbazoles in the presence of InCl₃ as catalyst.     

Green Aspect for Multicomponent Synthesis of Spiro[4H-indeno[1,2-b]pyridine-4,3′-[3H]indoles]

An efficient, four-component reaction of isatin, 1,3-indanedione, ethyl acetoacetate, and ammonium acetate in ethanol/water (9:1) system furnished spiro[4H-indeno[1,2-b]pyridine-4,3′-[3H]indoles] at room temperature. Merits of the method are mild reaction conditions, simple workup procedure, and ambient temperature. The synthesized compounds exhibit excellent fluorescence properties.     

Microwave-assisted synthesis and antimicrobial activity of novel spiro 1,3,4-thiadiazolines from isatin derivatives

This work describes the synthesis of spiro 1,3,4-thiadiazolines from isatin-β-thiosemicarbazone acetylation, using microwave irradiation as a source of heating the reaction medium. N-substituted isatin derivatives were used as substrates to obtain thiosemicarbazones by adding thiosemicarbazide to the isatin ketone carbonyl. The final synthetic step was the reaction of thiosemicarbazones with acetic anhydride under microwave irradiation to get the spiro compounds. Reaction times ranged from 6 to 18 minutes resulting in yields of up to 90%. Biological assays have shown promising antibacterial and antifungal activity, especially spiro thiadiazolines derived from allylated isatins. All the proposed molecules proved to be potential drug candidates based on the results of the in silico investigation, with satisfactory drug-likeness and drug-score, respecting Lipinski's rule. The use of the microwave reactor was efficient for the synthesis of thiosemicarbazones and spiro compounds, resulting in a significant reduction in reaction times with conventional heating. Taking into account the threat of antimicrobial resistance, this work presents a series of bioactive molecules that are easily obtained via microwave reaction.     

Superelectrophilic Activation of N‐Substituted Isatins: Implications for Polymer Synthesis,a Theoretical Study

The stability and reactivity of mono‐ and multi‐protonatred N‐substituted isatin derivatives were studied at PBE0/aug‐cc‐pvtz//PBE0/6‐31+G** level of theory in triflic acid (TFSA) solution. Calculations showed that the monocationic intermediates are the principal reactive species in the reaction of hydroxyalkylation of isatin derivatives in TFSA media. Electron‐withdrawing substituents on the nitrogen atom increase the reactivity of isatin‐containing electrophiles towards aromatic hydrocarbons, in accordance with their expected electronic influence. Steric factors also play an important role in the reactivity of isatin‐containing electrophiles, especially in the second reaction step, due to their more sterically hindered reactive center.

     

Microwave Assisted One-pot Synthesis of 2-Amino-4H-chromenes and Spiropyrano[2,3-d]pyrimidine

A convenient and efficient method using microwave assisted one pot synthesis reactions for synthesis of 4H‐benzo[f]chromenes by the reaction of aromatic aldehydes with a mixture of malononitrile and naphthols was examined. The synthesis of spiropyrano[2,3‐d]pyrimidines by the reaction of isatin with malononitrile and barbituric acid and/or thiobarbituric acid was investigated. The versatility of the method was also examined through the reaction of aromatic aldehydes and malononitrile with various reagents.