Kinetic studies on the reactions of 3‐isothiazolones with 2‐methyl‐2‐propanethiol

The kinetics of the ring‐opening reactions of the 3‐isothiazolones ( 1a–d ) with aqueous 2‐methyl‐2‐propanethiol has been explored at pH 4. The results strongly suggest that the reaction is second order in thiol and third order overall. Extrapolation of the kinetic data gives third‐order rate constants that lie in the order ( 1a ) > ( 1b ) > ( 1c ) > ( 1d ) in line with the known biological activity of these derivatives. The mechanism of the reaction is thought to involve attack by one thiol at the sulfur atom of the isothiazolone with the concomitant hydrogen bonding of a second thiol to the amide nitrogen. Calculations of the structure and electronic properties of the isothiazolones at the RHF 6‐31G** level are supportive. © 2007 Wiley Periodicals, Inc. Int J Chem Kinet 39: 254–260, 2005     

Computational studies on the reactions of 3‐butenyl and 3‐butenylperoxy radicals

The reactions of 3‐butenyl (^?CH₂CH₂CH?CH₂) radicals—unimolecular decomposition, isomerization, as well as reaction with O₂—and the subsequent unimolecular rearrangement reactions of the 3‐butenylperoxy radicals have been investigated and are compared to the analogous reactions of butyl (^?CH₂CH₂CH₂CH₃) and butylperoxy radicals using transition‐state theory based on the quantum chemical calculations at the CBS‐QB3 level. For alkyl‐analogue processes, the reactions of 3‐butenyl and 3‐butenylperoxy radicals can be well characterized by the decreased and increased bond dissociation energies at the allylic and vinylic sites, respectively. The intramolecular addition reactions of the radical center atoms to the double bonds were found to be important non‐alkyl‐analogue reactions of 3‐butenyl and 3‐butenylperoxy radicals. As a consequence, the thermal decomposition of 3‐butenyl radicals was found to be slower than that of butyl radicals by one order of magnitude at temperature near 1000 K. Intramolecular addition reactions are suggested to be the predominant unimolecular rearrangement processes of 3‐butenylperoxy radicals over the entire temperature range investigated (500–1200 K). The intramolecular addition reactions of the alkenyl peroxy radicals, which have not been included in combustion kinetic models, and their implications for the autoignition of alkenes are discussed. © 2010 Wiley Periodicals, Inc. Int J Chem Kinet 42: 273–288, 2010     

Kinetic study of 2‐furanaldehyde, 3‐furanaldehyde,and 5‐methyl‐2‐furanaldehyde reactions initiated by Cl atoms

Rate coefficients for the gas‐phase reactions of chlorine atoms with a series of furanaldehydes have been determined at 298 ± 2 K and atmospheric pressure (708.5 ± 0.1). The experiments were performed using the relative technique combined with solid‐phase microextraction (SPME) sampling and gas chromatography with flame ionization detection (GC‐FID). Rate constants were determined relative to the reaction of Cl with n‐nonane and 2‐ethylfuran. The absolute rate coefficients k (in units of 10^?10 cm³ molecule^?1 s^?1) obtained were 2.61 ± 0.27 for 2‐furaldehyde, 3.15 ± 0.27 for 3‐furaldehyde, and 4 ± 0.5 for 5‐methyl‐2‐furaldehyde. This study shows that the reactions of furanaldehydes and Cl are very fast with little influence of the position of the aldehyde group or the presence of other substituent on the reactivity. The results seem to indicate a mechanism involving two main reaction channels, addition of chlorine atom to the double bond of the aromatic ring, and the abstraction of the aldehydic hydrogen. Further product studies are necessary to determine the mechanism of these reactions in more detail. © 2008 Wiley Periodicals, Inc. Int J Chem Kinet 40: 670–678, 2008     

Rate constants of the gas‐phase reactions of OH radicals with trans‐2‐hexenal,trans‐2‐octenal,and trans‐2‐nonenal

The rate constants of the gas‐phase reaction of OH radicals with trans‐2‐hexenal, trans‐2‐octenal, and trans‐2‐nonenal were determined at 298 ± 2 K and atmospheric pressure using the relative rate technique. Two reference compounds were selected for each rate constant determination. The relative rates of OH + trans‐2‐hexenal versus OH + 2‐methyl‐2‐butene and β‐pinene were 0.452 ± 0.054 and 0.530 ± 0.036, respectively. These results yielded an average rate constant for OH + trans‐2‐hexenal of (39.3 ± 1.7) × 10^?12 cm³ molecule^?1 s^?1. The relative rates of OH+trans‐2‐octenal versus the OH reaction with butanal and β‐pinene were 1.65 ± 0.08 and 0.527 ± 0.032, yielding an average rate constant for OH + trans‐2‐octenal of (40.5 ± 2.5) × 10^?12 cm³ molecule^?1 s^?1. The relative rates of OH+trans‐2‐nonenal versus OH+ butanal and OH + trans‐2‐hexenal were 1.77 ± 0.08 and 1.09 ± 0.06, resulting in an average rate constant for OH + trans‐2‐nonenal of (43.5 ± 3.0) × 10^?12 cm³ molecule^?1 s^?1. In all cases, the errors represent 2σ (95% confidential level) and the calculated rate constants do not include the error associated with the rate constant of the OH reaction with the reference compounds. The rate constants for the hydroxyl radical reactions of a series of trans‐2‐aldehydes were compared with the values estimated using the structure activity relationship. © 2009 Wiley Periodicals, Inc. Int J Chem Kinet 41: 483–489, 2009     

Cp2ZrCl2‐induced Reformatsky and Barbier reactions on isatins: an efficient synthesis of 3‐substituted‐3‐hydroxyindolin‐2‐ones

A mild and rapid one‐pot process for Reformatsky and Barbier reactions using a catalytic quantity of zirconocene dichloride (Cp₂ZrCl₂) as a promoter and zinc as a terminal reductant at room temperature in dimethyl formamide was developed. The protocol has wide substrate suitability and afforded the desired 3‐substituted‐3‐hydroxyindolin‐2‐ones from istains in good yields and short reaction time. Copyright © 2011 John Wiley & Sons, Ltd.     

Kinetics of the ene reactions of 4‐phenyl‐1,2,4‐triazoline‐3,5‐dione with β‐pinene and 2‐carene: Temperature,high pressure,and solvent effects

The data on temperature, solvent, and high hydrostatic pressure influence on the rate of the ene reactions of 4‐phenyl‐1,2,4‐triazoline‐3,5‐dione ( 1 ) with 2‐carene ( 2 ), and β‐pinene ( 4 ) have been obtained. Ene reactions 1 + 2 and 1 + 4 have high heat effects: ∆H_r‐n ( 1 + 2 ) −158.4, ∆H_r‐n( 1 + 4 ) −159.2 kJ mol⁻¹, 25°C, 1,2‐dichloroethane. The comparison of the activation volume (∆V^≠( 1 + 2 ) −29.9 cm³ mol⁻¹, toluene; ∆V^≠( 1 + 4 ) −36.0 cm³ mol⁻¹, ethyl acetate) and reaction volume values (∆V_r‐n( 1 + 2 ) −24.0 cm³ mol⁻¹, toluene; ∆V_r‐n( 1 + 4 ) −30.4 cm³ mol⁻¹, ethyl acetate) reveals more compact cyclic transition states in comparison with the acyclic reaction products 3 and 5 . In the series of nine solvents, the reaction rate of 1+2 increases 260‐fold and 1+4 increases 200‐fold, respectively, but not due to the solvent polarity.     

Gas‐phase ozonolysis: Rate coefficients for a series of terpenes and rate coefficients and OH yields for 2‐methyl‐2‐butene and 2,3‐dimethyl‐2‐butene

The kinetics of the gas‐phase reactions of O₃ with a series of selected terpenes has been investigated under flow‐tube conditions at a pressure of 100 mbar synthetic air at 295 ± 0.5 K. In the presence of a large excess of m‐xylene as an OH radical scavenger, rate coefficients k(O₃+terpene) were obtained with a relative rate technique, (unit: cm³ molecule^?1 s^?1, errors represent 2σ): α‐pinene: (1.1 ± 0.2) × 10^?16, ³Δ‐carene: (5.9 ± 1.0) × 10^?17, limonene: (2.5 ± 0.3) × 10^?16, myrcene: (4.8 ± 0.6) × 10^?16, trans‐ocimene: (5.5 ± 0.8) × 10^?16, terpinolene: (1.6 ± 0.4) × 10^?15 and α‐terpinene: (1.5 ± 0.4) × 10^?14. Absolute rate coefficients for the reaction of O₃ with the used reference substances (2‐methyl‐2‐butene and 2,3‐dimethyl‐2‐butene) were measured in a stopped‐flow system at a pressure of 500 mbar synthetic air at 295 ± 2 K using FT‐IR spectroscopy, (unit: cm³ molecule^?1 s^?1, errors represent 2σ ): 2‐methyl‐2‐butene: (4.1 ± 0.5) × 10^?16 and 2,3‐dimethyl‐2‐butene: (1.0 ± 0.2) × 10^?15. In addition, OH radical yields were found to be 0.47 ± 0.04 for 2‐methyl‐2‐butene and 0.77 ± 0.04 for 2,3‐dimethyl‐2‐butene. © 2002 Wiley Periodicals, Inc. Int J Chem Kinet 34: 394–403, 2002     

Synthesis of 1‐amino‐2‐methylindoline by Raschig process: Parallel reactions,modeling, and optimization

The reaction between chloramine and 2‐methylindoline was studied at pH 12.89, T = 40°C, and for different initial concentrations of reactants. The interaction includes two concurrent bimolecular mechanisms leading to 1‐amino‐2‐methylindoline and 2‐methylindole. The rate laws were determined at the first moments of the reaction by using a differential method. By considering the totality of the reactions that occur in the medium, an appropriate mathematical model was developed. It permits to follow the evolution of the system over time and to calculate the final yields of reaction products. An optimization in terms of the initial contents of 2‐methylindoline and chloramine was performed. It indicated that the maximum yield of 1‐amino‐2‐methylindoline does not exceed 56%. The results show the limit of the Raschig process for the synthesis of indolic hydrazines in aqueous medium. © 2002 Wiley Periodicals, Inc. Int J Chem Kinet 34: 575–584, 2002     

Synthesis and reactions of 3‐cyano‐4,6‐dimethyl‐2‐pyridone

Rapid synthesis of 3‐cyano‐4,6‐dimethyl‐2‐pyridone 3 , using piprazine as a catalyst was reported. X‐ray data of the 4,6‐dimethyl‐2‐oxo‐1,2‐dihydropyridine‐3‐carbonitrile exhibited its oxo form. Synthesis of isoquinolinecarbonitrile and pyridylpyridazine using compound 3 was investigated. Reactivity of the synthesized pyridone toward different organic reagents was also studied. J. Heterocyclic Chem., (2011).     

Theoretical comparative studies on transport properties of pentacene,pentathienoacene, and 6,13‐dichloropentacene

Pentacene derivative 6,13‐dichloropentacene (DCP) is one of the latest additions to the family of organic semiconductors with a great potential for use in transistors. We carry out a detailed theoretical calculation for DCP, with systematical comparison to pentacene, pentathienoacene (PTA, the thiophene equivalent of pentacene), to gain insights in the theoretical design of organic transport materials. The charge transport parameters and carrier mobilities are investigated from the first‐principles calculations, based on the widely used Marcus electron transfer theory and quantum nuclear tunneling model, coupled with random walk simulation. Molecular structure and the crystal packing type are essential to understand the differences in their transport behaviors. With the effect of molecule modification, significant one‐dimensional π‐stacks are found within the molecular layer in PTA and DCP crystals. The charge transport along the a‐axis plays a dominant role for the carrier mobilities in the DCP crystal due to the strong transfer integrals within the a‐axis. Pentacene shows a relatively large 3D mobility. This is attributed to the relatively uniform electronic couplings, which thus provides more transport pathways. PTA has a much smaller 3D mobility than pentacene and DCP for the obvious increase of the reorganization energy with the introduction of thiophene. It is found that PTA and DCP exhibit lower HOMO (highest occupied molecular orbital) levels and better environmental stability, indicating the potential applications in organic electronics. © 2015 Wiley Periodicals, Inc.     

3‐(2‐(2‐Oxo‐2H‐chromene‐3‐carbonyl)hydrazono)‐N‐(pyridin‐2‐yl)butanamide Complexes: Synthesis,Characterization, DFT,Biological, and Ion‐flotation studies

Schiff base complexes of Cu(II), Ni(II), Cd(II), and Zn(II) with 3‐(2‐(2‐oxo‐2H ‐chromene‐3‐carbonyl)hydrazono)‐N ‐(pyridin‐2‐yl)butanamide (H₂L) were produced. The synthesized compounds were deduced by elemental analysis, molar conductance, magnetic susceptibility, and spectroscopic techniques. The geometry of the prepared complexes was estimated by applying DFT method. Also, Cu(II) and Zn(II) were separated using a simple, quick, and low‐cost quantitative flotation technique preceding to their determinations using atomic absorption spectrophotometric (AAS). Additionally, the biological activities (antimicrobial, antioxidant, and cytotoxic) of isolated compounds were carried out.     

Synthesis and reactions of 2‐chloro‐2‐(hydroximino)‐1‐(4‐methyl‐2‐phenylthiazol‐5‐yl)ethanone

3‐Nitrosoimidazo[1,2‐a]pyridine, 3‐nitrosoimidazo[1,2‐a]pyrimidine, 3‐nitrosoquinoxaline, 2‐nitroso‐4H‐benzo[b]thiazine, 2‐nitroso‐4H‐benzo[b]oxazine, isoxazoles, isoxazolo[3,4‐d]pyridazines and pyrrolo[3,4‐d]isoxazole‐4,6‐dione were synthesized from 2‐chloro‐2‐(hydroximino)‐1‐(4‐methyl‐2‐phenylthiazol‐5‐yl)ethanone and different reagents. Structures of the newly synthesized compounds were confirmed by elemental analysis and spectral data.     

ChemKED: A Human‐ and Machine‐Readable Data Standard for Chemical Kinetics Experiments

Fundamental experimental measurements of quantities such as ignition delay times, laminar flame speeds, and species profiles (among others) serve important roles in understanding fuel chemistry and validating chemical kinetic models. However, despite both the importance and abundance of such information in the literature, the community lacks a widely adopted standard format for this data. This impedes both sharing and wide use by the community. Here we introduce a new chemical kinetics experimental data format, ChemKED and the related Python‐based package for validating and working with ChemKED‐formatted files called PyKED. We also review past and related efforts and motivate the need for a new solution. ChemKED currently supports the representation of autoignition delay time measurements from shock tubes and rapid compression machines. ChemKED‐formatted files contain all of the information needed to simulate experimental data points, including the uncertainty of the data. ChemKED is based on the YAML data serialization language and is intended as a human‐ and machine‐readable standard for easy creation and automated use. Development of ChemKED and PyKED occurs openly on GitHub under the BSD 3‐clause license, and contributions from the community are welcome. Plans for future development include support for experimental data from laminar flame, jet‐stirred reactor, and speciation measurements.     

2‐(2‐Oxazolin‐2‐yl)benzene‐1,4‐diol: X‐ray and density functional theory studies

In the crystal structure of the title compound, C₉H₉NO₃, there are strong intra­molecular O—H⋯N and inter­molecular O—H⋯O hydrogen bonds which, together with weak inter­molecular C—H⋯O hydrogen bonds, lead to the formation of infinite chains of mol­ecules. The calculated inter­molecular hydrogen‐bond energies are −11.3 and −2.7 kJ mol⁻¹, respectively, showing the dominant role of the O—H⋯O hydrogen bonding. A natural bond orbital analysis revealed the electron contribution of the lone pairs of the oxazoline N and O atoms, and of the two hydr­oxy O atoms, to the order of the relevant bonds.     

Chloroformamidinium salts: Efficient reagents for preparation of 2‐aminobenzoimidazole, 2‐aminobenzoxazole,and 2‐aminobenzothiazole derivatives

A Reaction involving chloroformamidinium salts (TCFH 1a , BTCFH 1b , DmCFH 1c , DmPCFH 1d , BPCFH 1e ) and 2‐aminophenol 9a , benzene‐1,2‐diamine 9b , and 2‐aminothiophenol 9c afforded 2‐aminobenzoxazole 13 , 2‐aminobenzoimidazole 14 , and 2‐aminobenzothiazole 15 derivatives, respectively as major products, due to the in situ heterocyclization with dimethylamine acting as the better leaving group. Attempts for preparation of 13‐15 from the reaction of N,N‐dimethyl carbomyl chloride 16 with 2‐aminophenol 9a , benzene‐1,2‐diamine 9b , and 2‐aminothiophenol 9c were unsuccessful, and gave the unexpected products benzoxazol‐2‐ol 18a , benzoimidazol‐2‐one 18b , and S‐(2‐amino‐phenyl) N,N‐dimethylthiocarbamate 19 respectively. On the other hand reaction of chloroformamidinium salts 1a‐e with 3‐benzyl‐2‐hydrazinoquinoxaline 3 and 1‐hydrazinophthalazine hydrochloride 4 in the presence of triethylamine as a base, afforded the [1,2,4]triazolo derivatives 6 and 7 respectively in good yield and purity. These triazole derivatives were formed due to the strong tendency towards heterocyclization and substitution of dimethylamine group as a better leaving group.     

A DFT study on the mechanisms for the cycloaddition reactions between 1‐Aza‐2‐azoniaallene cations and carbodiimides

The mechanisms of the title reactions between 1‐aza‐2‐azoniaallene cations and carbodiimides in the gas phase have been examined using the Becke‐3‐parameter‐Lee‐Yang‐Parr (B3LYP) at 6‐31++G** level. The theoretical results revealed that the reaction is a domino reaction that comprises two consecutive reactions: an ionic [3+2] cycloaddition reaction between 1‐aza‐2‐azoniallene cation and carbodiimide to yield the cycloadduct 3 and then a [1,2]‐shift to yield the thermodynamically more stable adduct 4 . Both stepwise and concerted pathways are accessible in the first cycloaddition in the model reaction. The activation barriers of them are almost equivalent. For the [1,2]‐shift reactions, both of the electron‐withdrawing chlorine substituent and the electron‐releasing methyl substituent on the 1‐aza‐2‐azoniaallene cation can facilitate the reaction but have little effects when substituted in the carbodiimide moiety. The model reaction has also been investigated at the QCISD (quadratic configuration interaction using single and double substitutions)/6‐31++G** and CCSD(T) (coupled cluster calculations with single and double excitations and a perturbative estimate of triple contributions calculations)/6‐31++G** levels as well as by the density functional theory. In addition, solvent effects with the isodensity‐surface polarized continuum model are also reported for all the reactions. In solvent dichloromethane, the cycloadducts of all the reactions, except model reaction and reaction d, were obtained from reactants directly as the result of the solvent effect. © 2011 Wiley Periodicals, Inc. Int J Quantum Chem, 2011     

Ab initio calculations and RRKM/Master Equation modeling of chloroalkanes → alkenes + HCl reactions for use in comparative rate studies

This paper reports computations that were done in conjunction with an experimental study, reported in an accompanying paper, involving single pulse shock tube measurements of the thermal decomposition of 2‐chloropropane, chlorocyclopentane, and chorocyclohexane. The overall aim of the combined work is to provide a well‐defined, self‐consistent, and reliable set of rate constants for those species over an extended temperature range for use as reference reactions in comparative rate studies. To provide additional validation of the results for the compounds of direct interest, the dehydrochlorination reactions of the related compounds chloroethane, 1‐chloropropane, and 2‐chlorobutane are also considered. The present work reviews and summarizes the literature information regarding the molecular properties, thermochemistry, and chemical kinetic data for the above six alkyl chlorides. Quantum chemical methods are used to compute the structure and energies of reactants, products, and transition states and the fundamental nature of these types of reaction (four‐centered “semi‐ion pair” transition states) is discussed. The experimental and theoretical results are compared in detail, and uncertainties are assessed. The computations are used, in conjunction with experimentally determined rate constants, to develop Rice–Ramsperger–Kassel–Marcus (RRKM)/Master Equation models and thereby allow extrapolation of the experimental data over an extended range of temperatures. © 2011 Wiley Periodicals, Inc. *

1 This article is a U.S. Government work and, as such, is in the public domain of the United States of America.

Int J Chem Kinet 44: 369–385, 2012     

Theoretical studies of spin state‐specific [2 + 2] and [5 + 2] photocycloaddition reactions of n‐(1‐penten‐5‐yl)maleimide

N‐alkenyl maleimides are found to exhibit spin state‐specific chemoselectivities for [2 + 2] and [5 + 2] photocycloadditions; but, reaction mechanism is still unclear. In this work, we have used high‐level electronic structure methods (DFT, CASSCF, and CASPT2) to explore [2 + 2] and [5 + 2] photocycloaddition reaction paths of an N‐alkenyl maleimide in the S₁ and T₁ states as well as relevant photophysical processes. It is found that in the S₁ state [5 + 2] photocycloaddition reaction is barrierless and thus overwhelmingly dominant; [2 + 2] photocycloaddition reaction is unimportant because of its large barrier. On the contrary, in the T₁ state [2 + 2] photocycloaddition reaction is much more favorable than [5 + 2] photocyclo‐addition reaction. Mechanistically, both S₁ [5 + 2] and T₁ [2 + 2] photocycloaddition reactions occur in a stepwise, nonadiabatic means. In the S₁ [5 + 2] reaction, the secondary C atom of the ethenyl moiety first attacks the N atom of the maleimide moiety forming an S₁ intermediate, which then decays to the S₀ state as a result of an S₁ → S₀ internal conversion. In the T₁ [2 + 2] reaction, the terminal C atom of the ethenyl moiety first attacks the C atom of the maleimide moiety, followed by a T₁ → S₀ intersystem crossing process to the S₀ state. In the S₀ state, the second C C bond is formed. Our present computational results not only rationalize available experiments but also provide new mechanistic insights. © 2017 Wiley Periodicals, Inc.