Long branching in poly(vinyl acetate) and poly(vinyl alcohol). II. Polymerization of vinyl acetate in the presence of crosslinked poly(vinyl alcohol)

It is a common view that poly(vinyl acetate) has many branches at the acetyl side group, but that the corresponding poly(vinyl alcohol) has little branching. In order to study the branching in poly(vinyl acetate) and poly(vinyl alcohol) which is formed by chain transfer to polymer, the polymerization of ¹⁴C-labeled vinyl acetate in the presence of crosslinked poly(vinyl acetate), which was able to be decrosslinked to give soluble polymers, was investigated at 60°C and 0°C. This system made it possible to separate as well as to distinguish the graft polymer from the newly polymerized homopolymer. Furthermore, the degree of grafting onto the acetoxymethyl group and onto the main chain were estimated. It became clear that, in the polymerization of vinyl acetate, chain transfer to the polymer main chain takes place about 2.4 times as frequently at 60°C as that to the acetoxy group and about 4.8 times as frequently at 0°C.     

Non-isothermal crystallization of NaX nanocrystals/poly (vinyl alcohol) nanocomposite

Journal of Thermal Analysis and Calorimetry - This paper reports the successful synthesis of NaX nanocrystals using an organic, additive-free hydrothermal approach. Then, solution casting was used...     

Photochemical stability of poly(vinyl alcohol) in the presence of collagen

The photochemical stability of poly(vinyl alcohol) (PVA) in the presence of 1%, 3% and 5% of collagen has been studied by Fourier Transform Infrared (FTIR) Spectroscopy, UV-vis spectroscopy, and Differential Scanning Calorimetry (DSC). PVA samples containing 1%, 3% and 5% of collagen were irradiated with UV light wavelength λ = 254 nm in air.The results have shown that PVA in the presence of 1%, 3% and 5% of collagen is less stable under UV radiation than pure PVA. A small amount of collagen in PVA enhances photooxidation in the PVA. The amount of crystallinity in PVA containing 1%, 3% and 5% of collagen decreases faster with UV irradiation time than that for pure PVA films.     

Controlled release of atenolol from freeze/thawed poly(vinyl alcohol) hydrogel

Physically crosslinked polymeric films containing atenolol drug were formulated and the release of the drug was evaluated with view to investigate the feasibility of these films as drug delivery systems. Freezing and thawing process for PVA was used to prepare a controlled release device for atenolol drug. The process included incorporation of the drug into PVA film during the freezing and thawing process. The PVA has used a molecular weight of 125 k and degree of saponification of 98. Various amounts of the atenolol drug were incorporated into the freeze/thawed PVA. The in vitro release behavior of atenolol from these films was investigated. The drug release profiles from the polymeric formulations indicated initial high rate of release followed by slow rate of the release. The release of atenolol increased with increasing drug concentration in the film. The results showed the feasibility of the use of freezing and thawing technique to control the release of atenolol drug from PVA.     

Long branching in poly(vinyl acetate) and poly(vinyl alcohol). IV. Polymerization of vinyl trimethylacetate in the presence of crosslinked poly(vinyl acetate)

In order to clarify the grafting behavior of vinyl trimethylacetate (VTMAc) onto poly-(vinyl acetate) (PVAc), the polymerization of a radioactive VTMAc in the presence of a crosslinked PVAc gel was studied in accordance with the experimental technique described in the previous papers. It was found that, at 60°C, the grafting onto the main chain of PVAc takes place about 2.8 times as readily as that onto the acetyl side group on PVAc.     

Morphology and crystallinity of particles formed from dilute solutions of poly(vinyl alcohol-b-acrylonitrile), poly(vinyl alcohol) and polyacrylonitrile

The morphology of agglomerates and particles of poly(vinyl alcohol-b-acrylonitrile), poly(vinyl alcohol) (PVA) and polyacrylonitrile (PAN) formed from their dilute solutions and the variation of the morphology with the composition of the block copolymers were examined using transmission electron microscopy. The crystalline nature of these particles was studied by an electron diffraction method. Electron diffraction for copolymers containing AN lower than 30 wt% mainly showed a single-crystal diffraction pattern of the PVA component. With the copolymer containing 38.90 wt% AN, a mixed pattern of a blend of PVA polycrystal and PAN polycrystal as well as a PVA single-crystal pattern were simultaneously observed.     

Enhanced thermal stability of poly(vinyl alcohol) in presence of melanin

A novel method was developed to enhance the thermal stability of PVA by using natural and synthetic melanins from oxidation of dopamine. Thermogravimetric (TG) curves indicated that the synthetic melanin changed the thermal degradation behaviors of PVA and largely improved the decomposed temperature by 80–110 °C in nitrogen when incorporation of synthetic melanin with low content (0.5–2 mass%). The thermal degradation kinetics suggested the activation energies of PVA/synthetic melanin blends were much higher than these of pure PVA. Isothermal TG curves conformed that the PVA/synthetic melanin blends exhibited more thermal stability than pure PVA. Moreover, the chemical structure changes of macromolecular after degradation were characterized by using fourier transform infrared and the results suggested that elimination reaction on the first degradation step did not took place for the PVA/synthetic melanin blends at 270 °C.     

Heterotactic poly(vinyl alcohol)

Bulky substituents in vinyl trialkylsilyl ethers and vinyl trialkylcarbinyl ethers led to heterotactic polymers (H = 66%). The polymers were converted into poly(vinyl alcohol) (PVA) and further to poly(vinyl acetate), and tacticity was determined as poly(vinyl acetate). Vinyl triisopropylsilyl ether in nonpolar solvents yielded a heterotactic polymer with a higher percentage of isotactic triads than syndiotactic triads (Hetero-I). Vinyl trialkylcarbinyl ethers in polar solvents gave a heterotactic polymer with more syndiotactic triads than isotactic (Hetero-II). Heterotactic PVA was soluble in water and showed characteristics infrared absorptions. Interestingly, Hetero-I PVA showed no iodine color reaction, but Hetero-II showed a much more intense color reaction than a commercial PVA. The mechanism of heterotactic propagation was discussed in terms of the Markóv chain model.     

Dilute solutions of poly(vinyl alcohol) derived from vinyl trifluoroacetate

The dilute-solution behavior of poly(vinyl alcohol) (PVA_VTFA), derived from vinyl trifluoroacetate, in water-dimethylsulfoxide (DMSO) mixtures was investigated. With solvent mixtures ranging from 10 to 20 vol % DMSO, the relation between the reduced viscosity η_sp/C and the polymer concentration C was linear for polymer concentrations above 0.2 g/dL, whereas in solutions in mixed solvents of other compositions the dependence was linear for polymer concentrations above 0.1 g/dL. The relation between the intrinsic viscosity [η] obtained for aqueous solutions of PVA_VTFA and the molecular weight M estimated from viscosity measurements in solutions of poly(vinyl acetate) (PVA_VTFA), obtained by acetylation of PVA_VTFA, was given by [η] = 7.34 × 10^?4 M^0.63. The value of [η] was greatest for the solvent mixture with 10 vol % DMSO and smallest for about 50 vol % DMSO, and Huggins constants k were smallest and greatest for these two cases, respectively. The turbidity of the solutions of low-molecular-weight PVA_VTFA, was higher than that of high-molecular-weight PVA_VTFA up to 30 vol % DMSO, and the reverse relation held for 40-70 vol % DMSO.     

Effect of poly(vinyl alcohol) fine particles as a novel biodegradable nucleating agent on the crystallization of poly(3‐hydroxybutyrate)

The effect of poly(vinyl alcohol)(PVA) fine particles as the nucleating agent on the crystallization behavior of bacterial poly(3‐hydroxybutyrate)(PHB) was studied using differential scanning calorimetry measurements and polarized light microscope observation. The results were compared with the effect of PVA conventionally blended with PHB. The PVA fine particles were found to be able to greatly enhance the crystallization of PHB, while the conventionally blended PVA extremely retarded the crystallization of PHB. The nucleating effect of PVA fine particles is almost comparable to that of the talc powder. Considering the biodegradability and biocompatibility of PVA, the usage of PVA particle as a nucleating agent provides marked benefits over the currently employed nonbiodegradable nucleating agents, such as talc and boron nitride. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44:1813–1820, 2006     

Characterization of poly(vinyl alcohol) during the emulsion polymerization of vinyl acetate using poly(vinyl alcohol) as emulsifier

During the emulsion polymerization of vinyl acetate (VAc) using poly(vinyl alcohol) (PVA) as stabilizer and potassium persulfate as initiator, the VAc reacts with PVA forming PVA-graft-PVAc. When the grafted polymer reaches a critical size it becomes water-insoluble and precipitates from the aqueous phase contributing to the formation of polymer particles. Since particle formation and therefore the properties of the final latex will depend on the degree of grafting, it is important to quantify and to characterize the grafted PVA. In this work, the quantitative separation and characterization of the grafted water-insoluble PVA was carried out by a two-step selective solubilization of the PVAc latex, first with acetonitrile to separate PVAc homopolymer, followed by water to separate the water-soluble PVA from the remaining acetonitrile-insoluble material. After the separation, the water-soluble and water-insoluble PVA were characterized by Fourier Transform Infrared (FTIR) spectroscopy and ¹H and ¹³C nuclear magnetic resonance (NMR) analyses, from which the details of the PVA-graft-PVAc structure were obtained. © 1996 John Wiley & Sons, Inc.     

Spectrophotometric determination of antimony with vanillylfluorone in the presence of poly(vinyl alcohol)

Antimony in the range up to 2.5 mug/ml in the final solution is determined spectrophotometrically with vanillylfluorone in the presence of poly(vinyl alcohol) in acidic media. The method is compared with that using o-hydroxyhydroquinonephthalein (Qnph). It is simple, rapid and sensitive, without need for heating or solvent extraction, and the apparent molar absorptivity () is 5.0 x 10(4) 1.mole(-1).cm(-1) at 545 nm; for the Qnph method is 2.8 x 10(4) 1.mole(-1).cm(-1) at 520 nm. Tests with an artificial wastewater gave 99-103% recovery.     

Steric stabilization of thermally responsive N-isopropylacrylamide particles by poly(vinyl alcohol)

Poly(vinyl alcohol) (PVA) was used as a steric stabilizer for the dispersion polymerization of cross-linked poly(N-isopropylacrylamide) (PNIPAM) in water. A series of reactions were carried out using PVA of varying molecular weight and degree of hydrolysis. Under appropriate conditions, PNIPAM particles of uniform and controllable size were produced using PVA as the stabilizer. The colloidal stability was investigated by measuring changes in particle size with temperature in aqueous suspensions of varying ionic strength. For comparison, parallel colloidal stability measurements were conducted on PNIPAM particles synthesized with low-molecular-weight ionic surfactants. PVA provides colloidal stability over a wide range of temperature and ionic strength, whereas particles produced with ionic surfactants flocculate in moderate ionic strength solutions upon collapse of the hydrogel as the temperature is increased. Experimental results and theoretical consideration indicate that sterically stabilized PNIPAM particles resulted from the grafting of PVA to the PNIPAM particle surface. The enhanced colloidal stability afforded by PVA allows the temperature-responsive PNIPAM particles to be used under physiological conditions where electrostatic stability is ineffective.     

Connection of poly(methyl methacrylate) microgel particles dispersed in poly(vinyl alcohol) matrix by seed polymerization

Poly(methyl methacrylate) microgels covered with poly(hydroxyethyl methacrylate) thin layer was dispersed in poly(vinyl alcohol) matrix. Homogeneous and regular arrangement of the microgel particles was suggested by Bragg diffraction for the films prepared by varying the PVA/microgel ratio (from 6/4 to 3/7 (w/w)). It was proved that the regular arrangement and connection of the microgels by seeded polymerization in poly(vinyl alcohol) were possible. © 1996 John Wiley & Sons, Inc.     

Structural irregularities in poly(vinyl alcohol)

Poly(vinyl alcohols) derived from the product of polymerization of vinyl acetate in methanol have been characterized by various physical and chemical methods before and after NaIO₄ cleavage. The 220-MHz ¹H-NMR spectra confirm the reliability of NaIO₄ titrimetry for estimating 1,2-glycol content and help explain the tendency for viscometry to grossly underestimate the 1,2-glycol content for low molecular weight polymers. The spectra and related chemical evidence indicate that the major endgroups are HOCH₂CH₂? and CH₃CH(OH)CH(OH)CH₂? . ß-Hydroxyethyl groups also occur as short chain branches, mainly attached to α carbon atoms in the normal head-to-tail polymer chain sequence. The concentrations of the branch and endgroups depend on polymerization conditions and help explain polymerization “solvent” effects on physical properties.     

Miscibility and isothermal crystallization behavior of polyamide 6/poly(vinyl alcohol) blend

An investigation of miscibility and isothermal crystallization behavior of Polyamide 6 (PA6)/Poly(vinyl alcohol) (PVA) blends was conducted. Fourier transform infrared spectra (FTIR) analysis indicated that the interactions between the carbonyl groups of PA6 and hydroxyl groups of PVA increase as the weight ratios of PA6 to PVA of PA6/PVA specimens increase. This interaction between PA6 and PVA leads to their miscibility in the amorphous region and even some extent effects on their crystal phase, respectively. Further isothermal crystallization behavior of PA6/PVA indicate that the miscibility of PVA in PA6 leading difficulty in crystallization of PA6. Several kinetics equations are employed to describe the effects of PVA on the crystallization properties of PA6 in PA6/PVA blends in detail. © 2008 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 46: 1360–1368, 2008