等离子体反应合成全卤代芘

用聚四氟乙烯电弧蒸发和氯仿蒸气辉光放电方法合成了一系列全卤代芳香化合物，分离和表征了其中的全氟代芘（Ｃ１６Ｆ１０）和全氯代芘（Ｃ１６Ｃｌ１０），讨论了等离体反应特征和产物形成机理。研究表明：等离子反应产物的形成不受起始物种、结构、形态和反应介质、放电方式的显影响，而是形成了一系列结构相似的同系物。     

C60富勒烯-哌啶硫代荒酸酯稠合体的合成与三线态特征

C₆₀富勒烯与2-(哌啶-硫代荒酸酯)-1,3-丁二烯通过Diels-Alder环加成反应得到C₆₀富勒烯-哌啶硫代荒酸酯稠合体,运用现代波谱技术等确定了产物结构;用半经验方法PM3和AM1计算预测环加成反应性和C₆₀富勒烯-哌啶硫代荒酸酯稠合体的性能.激光光解时间分辨技术初步探究了单加成的C₆₀富勒烯-哌啶硫代荒酸酯稠合体(C₆₀-PX)三线态特征以及与四-(2-噻吩基)-四硫富瓦烯(TT-TTF)分子间的光诱导电子转移反应.     

芘基丁酸改性锆-镁复合氧化物HPLC固定相的制备及其在分离富勒烯中的应用

制备了用于分离C₆₀和C₇₀的芘基丁酸改性锆-镁复合氧化物高效液相色谱固定相,并对其进行了表征;考察了流动相中甲苯含量、柱温和进样量对C₆₀和C₇₀分离的影响.结果表明,芘基丁酸改性锆-镁复合氧化物固定相对富勒烯有较强的保留,并对富勒烯表现出较强的分离能力,具有制备分离富勒烯的潜力.     

C1～C3正构醛、醇在质子转移反应飞行时间质谱中的产物离子特征分析

为分析C₁～C₃正构醛、 醇化合物在质子转移反应飞行时间质谱(PTR-TOF MS)中的产物离子特征, 考察了不同E/N值(E: 电场强度, N: 气体分子数密度)下C₁～C₃正构醛、 醇的产物离子种类和强度的变化. 结果表明, 低分子量正构醇类(甲醇、 乙醇和丙醇)倾向于形成质子化聚合物[nMH]⁺及其失水离子[nMH-H₂O]⁺, 且随着E/N值升高, 醇类会产生较多裂解碎片和多聚体离子. 低分子量正构醛(甲醛、 乙醛和丙醛)主要产生质子化产物[MH]⁺和一水合质子化产物[M·H₃O]⁺, 高E/N值(>125 Td)会抑制甲醛质子化, 也会抑制其加合产物的生成. 乙醛倾向于形成水加合物, 且随着E/N值增高, 质子化乙醛与一水合质子化乙醛的变化趋势相反. 另外, 丙醛在较高的E/N值下会产生一系列聚合物, 如[MH·C₂H₅]⁺和[2MH]⁺. 通过分析C₁～C₃正构醛、 醇的质子转移反应特征及产物离子形成过程, 获得了C₁～C₃正构醛、 醇的特征离子和对应的最佳E/N设置值, 为低分子量醛、 醇的定性分析提供了重要依据.     

中间体C60(CH3)-和产物C60(CH3)2的结构及产物

用INDO系列方法对C₆₀^2-与CH₃反应的中间体C₆₀(CH₃)^-进行理论研究,得到具有Cs对称性的构型。结果表明,CH₃加成到C₁₅上,将使与其相邻的双键碳(C₃₀)的电荷密度和自旋密度达极大值,故加成反应部位在C₃₀处;另外,C₁₅的对位C₁₂(或C₂₇)也较其它部位易于反应,且有两个反应场所,因而产物C₆₀(CH₃)₂可能为六元环上的1,2-加成和1,4-加成两种异构体的混合物。同时对两种加成产物的结构和电子光谱进行了理论研究,指认其电子跃迁,并讨论了其光谱红移的原因。     

16-脱氢黄体酮用梨头霉的羟基化

用梨头霉(Absidia orchidis)加羟基于16-脱氢黄体酮(1)与用黑根霉(Rhizopus nigricans)转化的结果不同,即羟基不加入于C₁₁而加入于C₆、C₇、C₁₅或兼而有之,且⊿¹⁶-双键不被饱和.所得产物是2～4,化合物(3)是主要产物.2～4的结构经化学转化和光谱方法测定.     

光促进温和条件下烯烃与二氧化碳的羰基化反应

羰基化反应是有机合成化学中常用的方法之一,但常规的羰基化反应大多要求高温(150～200℃)、高压(10～20 M Pa)或使用贵金属催化剂(如钌、铑、铱等),并且C₁源多用一氧化碳^[1].开发和利用CO₂这一丰富的C₁资源,并最大限度地降低其排放量具有挑战意义.但CO₂活化比较困难,在通常条件下难以转化成其它化学品^[2].在光促进下的羰基化反应可克服上述困难,使反应在温和条件及非贵金属催化下完成,同时可用CO₂代替CO作为C₁源,因此这是一个对环境友好的工艺^[3].本文报道烯烃在光促进常温常压和非贵金属钴配合物催化下与二氧化碳的羰基化反应,同时通过¹³CO₂和¹³CH₃OH同位素实验,对反应产物的结构进行了分析.     

高效合成大分子富勒烯金属包合物

采用直流电弧法, 以掺有金属合金和B₄C粉末的光谱纯石墨棒作为阳极, 在He和NH₃混合气氛中进行电弧放电, 首次高产率合成了一系列Gd₂@C_2n(94≤2n≤142)的大分子双金属富勒烯包合物. 实验证明, 异相物质作为热的载体并同时催化产生了大分子富勒烯金属包合物, 而NH₃则抑制了C₆₀和C₇₀等其它富勒烯的生成.     

棕榈酸修饰的α-螺旋两亲性多肽的共组装

设计合成了3条棕榈酸修饰的两亲性多肽C₁₅H₃₁CO-(AEELAKK)₃-NH₂(PA1), C₁₅H₃₁CO-(AEALAKK)₃-NH₂(PA2) 和C₁₅H₃₁CO-(AEELAKA)₃-NH₂(PA3), 研究了其在水溶液中的自组装行为以及带净正电荷的PA2 和带净负电荷的PA3 等比例混合后的共组装行为, 并推测了其机理. 圆二色谱分析结果表明, 其二级结构均为α-螺旋结构, PA2和PA3等比例混合后α-螺旋含量升高. 利用透射电镜观察了PA1, PA2, PA3以及PA2+PA3(体积比1: 1)自组装体的形貌, 结果表明, PA2和PA3等比例混合后共组装形成了长的纳米纤维. 芘荧光探针研究了3种两亲性多肽以及PA2+PA3 的临界胶束浓度.     

基于芘修饰树枝形聚合物的水相温敏荧光传感体系

设计合成了外围芘修饰的质子化二代聚酰胺-胺树枝形聚合物G2 PAMAM-PyH.¹H NMR和紫外可见吸收光谱表征确定芘基团的上载率为100%.吸收光谱、动态光散射（DLS）和透射电子显微镜（TEM）研究结果表明,G2 PAMAM-PyH在水中形成平均粒径为184 nm双分子膜囊泡结构.水相中G2 PAMAM-PyH囊泡体系呈现芘单体和激基缔合物的双荧光发射,1~70℃范围内,随温度升高芘单体荧光逐渐增强,而芘激基缔合物发光单调减弱,荧光颜色由绿变蓝,芘激基缔合物与芘单体发光比（I_{495 nm}/I_{398 nm}）随温度变化具有良好的可重复性,符合公式I_{495 nm}/I_{398 nm}=28.23-0.68t+3.21×10^-3t²+1.83×10^-5t³,可用于水相体系内部温度梯度的表征,在1~70℃范围温度测量灵敏度高于0.9℃.本工作为温度荧光探针传感体系的构筑提供了一种新方法.     

The gas-phase ozonolysis of α-humulene

α-Humulene contains three double bonds (DB), and after ozonolysis of the first DB the first-generation products are still reactive towards O(3) and produce second- and third-generation products. The primary aim of this study consisted of identifying the products of the three generations, focusing on the carboxylic acids, which are known to have a high aerosol formation potential. The experiments were performed in a 570 litre spherical glass reactor at 295 K and 730 Torr. Initial mixing ratios were 260-2090 ppb for O(3) and 250-600 ppb for α-humulene in synthetic air. Reactants and gas-phase products were measured by in situ FTIR spectroscopy. Particulate products were sampled on Teflon filters, extracted with methanol and analyzed by LC-MS/MS-TOF. Using cyclohexane (10-100 ppm) as an OH-radical scavenger and by monitoring the yield of cyclohexanone by PTR-MS, an OH-yield of (10.5 ± 0.7)% was determined for the ozonolysis of the first DB, and (12.9 ± 0.7)% of the first-generation products. The rate constant of the reaction of O(3) with α-humulene is known as k(0) = 1.17 × 10(-14) cm(3) molecule(-1) s(-1) [Y. Shu and R. Atkinson, Int. J. Chem. Kinet., 1994, 26, 1193-1205]. The reaction rate constants of O(3) with the first-generation products and the second-generation products were, respectively, determined as k(1) = (3.6 ± 0.9) × 10(-16) and k(2) = (3.0 ± 0.7) × 10(-17) cm(3) molecule(-1) s(-1) by Facsimile-simulation of the observed ozone decay by FTIR. A total of 37 compounds in the aerosol phase and 5 products in the gas phase were tentatively identified: 25 compounds of the first-generation products contained C13-C15 species, 9 compounds of the second-generation products contained C8-C11 species, whereas 8 compounds of the third-generation products contained C4-C6 species. The products of all three generations consisted of a variety of dicarboxylic-, hydroxy-oxocarboxylic- and oxo-carboxylic acids. The formation mechanisms of some of the products are discussed. The residual FTIR spectra indicate the formation of secondary ozonides (SOZ) in the gas phase, which are formed by the intramolecular reaction of the Criegee moiety with the carbonyl endgroup. These SOZ revealed to be stable over several hours and its formation was shown not to be affected by the addition of Criegee-radical scavengers such as HCOOH or H(2)O. This suggests that in the ozonolysis of α-humulene at atmospheric pressures the POZ will decompose rapidly, and that a large fraction of the formed exited Criegee Intermediate will be stabilized to form stable SOZ, while the formation of OH-radicals via the hydroperoxide channel will be a minor process.     

Synthesis and Structure Elucidation of New Spiro Compounds with Polyfluoroalkyl and Phosphonate Ester Groups

A series of spiro compounds with polyfluoroalkyl and phosphonate ester groups has been synthesized via several steps. The structures of these compounds were confirmed by ¹H NMR,¹³C NMR, infrared (IR), and mass spectrometry (MS) as well. The possible reaction mechanism for the formation of these products was also proposed.     

Direct analysis of highly oxidised organic aerosol constituents by on-line ion trap mass spectrometry in the negative-ion mode

On-line ion trap mass spectrometry (ITMS) enables the characterisation of constituents of biogenic secondary organic aerosols in complex organic reaction mixtures. This real-time analysis is achieved by directly introducing the airborne particles into the ion source of the mass spectrometer. Negative-ion chemical ionisation at atmospheric pressure (APCI(-)) was used as the ionisation method of choice. The aerosols were generated from the gas-phase ozonolysis of two C10H16-terpenes (alpha-pinene and limonene), and investigated by performing on-line APCI(-)-ITMS(n). Highly oxidised compounds were tentatively identified as important particle-phase products. Based on recent investigations of low-energy collision-induced dissociation pathways of a wide range of deprotonated multifunctional carboxylic acid species derived from monoterpene precursors (Warscheid B, Hoffmann T. Rapid Commun. Mass Spectrom. 2001; 15: 2259), the formation of structurally different C10H16O5 and C10H16O6 species, such as acidic esters from alpha-pinene and aldo-hydroxycarboxylic acids from limonene, is proposed.     

脉冲激光溅射合成全氯代多环芳烃

受Ｋｒａｔｓｃｈｅｒ等［１］电弧法合成Ｃ６０工作的启发,本课题组近年来以独创的液相电弧、微波放电等方法,合成了Ｃ５０及其多种全氯代碎片［２－５］．本文通过我们最近发展的脉冲激光溅射方法在四氯化碳的蒸汽中溅射石墨,得到丰富的克量级产物．这些产物经ＨＰＬＣ－ＵＶ－ＭＳ联用技术,表征为全氯代多环芳烃．其中部分物质含有五元环,可以看作是富勒烯形成过程中产生的全氯代碎片,该研究结果不仅有助于了解富勒烯的形成机理,而且展示了激光溅射合成法应用前景．１实验部分 实验在特制的反应装置上进行,所用的脉冲激光为Ｑ－…     

A Microwave Promoted New Condensation Reaction of Aryl Ketones With Triethyl Ortho-Formate

Under microwave irradiation, boron trifluoride has been found to mediate a new condensation reaction of aryl ketones with triethyl orthoformate to give a series of new products (C1-C10) is described. The compounds were first reported. Their structure were determined by IR, MS, and ¹H /¹³C NMR spectra.     

Reaktionen von Lithium-Chlor-bis(trimethylsilyl)methan mit Fluorsilanen

Reactions of Lithium-chlor-bis (trimethylsilyl)methane with Fluorosilanes The lithium salt of chloro-bis(trimethylsilyl)methane reacts with fluorosilanes to give monosubstituted compounds ( 1—6 ). The reaction is often accompanied by exchange of the chloro atom by hydrogen ( 3—6 ) and by formation of disubstituted products ( 7—11 ) and Cl₂C(SiMe₃)₂. The lithiation of dichloro-bis(trimethylsilyl)methane may occur in reaction with C₄H₉Li ( 1—4, 6 ) or with elemental lithium ( 5 ). Butylsubstituted compounds were obtained as by products of 6 (6 a) and 10 (10 a) . The unsymetrical SiF-substituted compound 12 is formed in reaction of lithiated 2 with F₂SiMe₂. By absence of F₂SiMe₂ the lithium salt dimerises under formation of a 1, 3-disilacyclobutane and LiF.     

Photochemische Reaktionen. 83. Mitteilung. Verbindungen der 3,4-Dihydrojonon-Reihe als Modelle zur Photochemie γ, δ- bzw. δ, ϵ-ungesättigter Ketone und Aldehyde

Compounds of the 3,4-dihydro-ionone series as models for the photochemistry of γ, δ- and δ,?- unsaturated ketones and aldehydes . The photochemistry of γ, δ- and δ,?-unsaturated carbonyl compounds of the dihydro-ionone series has been studied, with special attention to the investigation of oxetane formation versus hydrogen abstraction. UV.-irradiation of the dihydro-β-ionone compounds with structure A ( 1 , 7 , 14 , 18 , 24 , 29 ) led to isomeric ethers with structures B ( 2 , 8 , 15 , 19 , 25 , 30 ), C ( 3 , 9 , 16 , 20 , 26 , 31 ) and D ( 4 , 21 , 27 ), isomeric bicyclic alcohols with structure E ( 5 , 10 , 17 , 22 , 28 ), and photoreduction products with structure F ( 6 , 11 , 12 , 13 ). Photolysis of dihydro-γ-ionone ( 32 ) gave a complex mixture containing fragmentation product 35 , hydrocarbon 36 , β-ambrinol ( 34 ), oxetane 33 , as well as dihydro-β-ionone ( 1 ) and three of its photoproducts ( 2 , 3 , 5 ). The dihydro-α-ionone compounds 37 and 40 gave mixtures of fragmentation products and the oxetanes 38 and 41 . Irradiation of the side-chain homologues 42 and 45 yielded 43 , which photo-cyclizes to 44 . In contrast, 3 , 4 -dihydro-3′,4′-dehydro-β-ionone ( 46 ) gave merely the isomeric open-chain triene-ketone 47 . The structures assigned to the ethers 2 , 3 , 33 , 38 and to the alcohols 5 , 10 , 13 could be confirmed by chemical reactions and mutual interconversions. The structure of the ether 21 had to be established by X-ray analysis, details of which are described. A novel intramolecular hydrogen transfer is involved in formation of ethers B . The photocyclization A → D probably proceeds by addition of the carbonyl-C atom to the double bond ( A → h ), followed by methyl (1 → 2)-shift ( h → i ). Process A → h may also be involved in formation of compounds of type C and E .     

Development of diversified methods for chemical modification of the 5,6-double bond of uracil derivatives depending on active methylene compounds

The reaction of 5-halogenouracil and uridine derivatives 1 and 7 with active methylene compounds under basic conditions produced diverse and selective C-C bond formation products by virtue of the nature of the carbanions. Three different types of reactions such as the regioselective C-C bond formation at the 5- and 6-positions of uracil and uridine derivatives (products 2, 5, 8, 17, 20 and 21), and the formation of fused heterocycle derivatives 2,4-diazabicyclo[4.1.0]heptane (15) and 2,4-diazabicyclo-[4.1.0]nonane (16) via dual C-C bond formations at both the 5- and 6-positions were due to the different active methylene compounds used as reagents.     

Synthesis,Antiviral, and Antimicrobial Activity of N‐ and S‐Alkylated Phthalazine Derivatives

A series of N‐alkylphthalazinone were synthesized by the reaction of phthalazin‐1(2H)‐one derivatives 1a , 1b , 1c with alkylating agents namely, propargyl, allyl bromide, epichlorohydrin, 1,3‐dichloro‐2‐propanol, 4‐bromobutylacetate, and 1‐(bromomethoxy)ethyl acetate to give the corresponding N‐alkylphthalazinone 2a , 2b , 2c , 3a , 3b , 3c , 5a , 5b , 5c , 6a , 6b , 6c , 7a , 7b , 7c , and 9a , 9b , 9c . Alkylation of phthalazin‐1(2H)‐thione to give a series from S‐alkylphthalazine 12 , 13 , 14 and thioglycosides 15 and 17 was performed. Deprotection of compounds 7a , 7b , 7c , 9a , 9b , 9c , 15 , and 17 resulted in the formation of the corresponding products 8a , 8b , 8c , 10a , 10b , 10c , 16 , and 18 . The structure of newly synthesized compounds was assigned by IR, ¹H, ¹³C NMR, and elemental analysis. Some of these compounds were screened for antiviral and antimicrobial activity.     

Comparison between electron transfer and nucleophilic reactivities of ketene silyl acetals with cationic electrophiles

The products and kinetics for the reactions of ketone silyl acetals with a series of p-methoxy-substituted trityl cations have been examined, and they are compared with those of outer-sphere electron transfer reactions from 10,10'-dimethyl-9,9', 10, 10'- tetrahydro-9,9'-biacridine [(AcrH)2] to the same series of trityl cations as well as other electron acceptors. The C-C bond formation in the reaction of beta,beta-dimethyl-substituted ketene silyl acetal (1: (Me2C=C(OMe)OSiMe3) with trityl cation salt (Ph3C+ClO4-) takes place between 1 and the carbon of para-positon of phenyl group of Ph3C+, whereas a much less sterically hindered ketene silyl acetal (3: H2C=C(OEt)OSiEt3) reacts with Ph3C+ at the central carbon of Ph3C+. The kinetic comparison indicates that the nucleophilic reactivities of ketene silyl acetals are well correlated with the electron transfer reactivities provided that the steric demand at the reaction center for the C-C bond formation remains constant.