Polaron effects and electric field dependence of the charge carrier mobility in conjugated polymers

Charge transport in conjugated polymers has been investigated using Monte Carlo simulations implemented on top of the Marcus theory for donor-acceptor transition rates. In particular, polaron effects and the dependency of the mobility on the temperature and the applied electric field have been studied. The conclusions are that while the qualitative temperature dependence is similar to that predicted by Miller-Abrahams theory in the Gaussian disorder model (GDM), the electric field dependence is characterized by a crossover into the Marcus inverted region, not present in the GDM. Furthermore, available analytical approximations to describe the electric field dependence of the mobility in Marcus theory fail to fit the simulation data and hence cannot be used to directly draw conclusions about the importance of polaron effects for charge transport in conjugated polymers.     

An electrochemically synthesized sulfonated polyaniline layer for positive charge carrier injection improvement in conjugated polymer devices

We report the use of sulfonated polyaniline, SPAN, as a positive charge transporting layer in organic electronic devices, demonstrating that it can be used to significantly improve injection into conjugated polymers. The introduction of an intermediate SPAN layer improves device rectification, even when low-work-function anode materials such as tin oxide are used.     

Techniques for characterization of charge carrier mobility in organic semiconductors

The charge transport characteristics of organic semiconductors are one of the key attributes that impacts the performance of organic electronic and optoelectronic devices in which they are utilized. For improved performance in organic photovoltaic cells, light-emitting diodes, and field-effect transistors (FETs), efficient transport of the charge carriers within the organic semiconductor is especially critical. Characterization of charge transport in these organic semiconductors is important both from scientific and technological perspectives. In this review, we shall mainly discuss the techniques for measuring the charge carrier mobility and not the theoretical underpinnings of the mechanism of charge transport. Mobility measurements in organic semiconductors and particularly in conjugated polymers, using space-charge-limited current, time of flight, carrier extraction by linearly increasing voltage, double injection, FETs, and impedance spectroscopy are discussed. The relative merits, as well as limitations for each of these techniques are reviewed. © 2012 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2012     

Influence of crosslinking on charge carrier mobility in crosslinkable polyfluorene derivatives

Carrier mobility is a key parameter for the application of conjugated polymers. In this work, a series of polyfluorenes (PF2/6) with different fractions of crosslinkable acrylate groups is investigated. Mobility measurements are carried out to assess the influence of crosslinking with different photoinitiators on the performance of the material. For the regime of low to medium charge carrier density, relevant for OLEDs and OPVs, we used a novel technique based on the injection of charge carriers from the electrodes of an optoelectronic device: MIS‐CELIV (MIS: metal‐insulator‐semiconductor). For large charge carrier densities we performed OFET measurements. We find that using optimized conditions crosslinking does not influence the hole mobility in the investigated system. Furthermore, we demonstrate that the crosslinking process may be triggered solely by thermal activation and UV‐illumination without the need of any initiator. Thus, densely crosslinked networks are obtained without the formation of undesired decomposition products from added photoinitiator. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2017 , 55, 112–120     

Synthesis, processing and properties of conjugated polymer networks

Despite the diverse research activities focused on the chemistry, materials science and physics of conjugated polymers, the feature of conjugated cross-links, which can provide electronic communication between chains, has received little attention. This situation may be a direct consequence of the challenge to introduce such links while retaining adequate processability. Focusing on recent studies of materials for which charge transport or electrical conductivity data are available, this feature article attempts to present an overview of the synthesis, processing and electronic properties of conjugated polymer networks. For the purpose of this discussion, two distinctly separate architectures-featuring covalent cross-links on the one hand and non-covalent organometallic bridges on the other-are treated in separate sections. The available data indicate that cross-linking can have significant benefits for intermolecular charge transfer if the polymers are carefully designed.     

High electron mobility in ladder polymer field-effect transistors

Field-effect mobility of electrons as high as 0.1 cm2/(V s) is observed in n-channel thin film transistors fabricated from a solution spin-coated conjugated ladder polymer, poly(benzobisimidazobenzophenanthroline) (BBL), under ambient air conditions. This is the highest electron mobility observed to date in a conjugated polymer semiconductor. Comparative studies of n-channel thin film transistors made from a structurally similar nonladder conjugated polymer BBB gave an electron mobility of 10-6 cm2/(V s). These results demonstrate that electron transport can be as facile as hole transport in conjugated polymer semiconductors and that ladder architecture of a conjugated polymer can substantially enhance charge carrier mobility.     

Macromolecular dynamics of conjugated polymer in donor-acceptor blends with charge transfer complex

Donor-acceptor blends based on conjugated polymers are the heart of state-of-the-art polymer solar cells, and the control of the blend morphology is crucial for their efficiency. As the film morphology can inherit the polymer conformational state from solution, the approaches for probing and controlling the polymer conformational state in the blends are of high importance. In this study, we show that the macromolecular dynamics in solutions of the archetypical conjugated polymer, MEH-PPV, is essentially changed upon addition of an acceptor 2,4,7-trinitrofluorenone (TNF) by using dynamic light scattering (DLS). We have observed four new types of the macromolecular dynamics absent in the parent polymer determined by the polymer and acceptor content. The MEH-PPV?:?TNF ground-state charge-transfer complex (CTC) is suggested to result in these dynamics. In the dilute polymer solution, the CTC formation leads to slower dynamics as compared with the pristine polymer. This is evidence of aggregates formed by intercoil links that are the CTCs involving two conjugated segments of different coils with acceptor molecules being sandwiched between them. At low acceptor content, the aggregates are not stable but at high acceptor content, they are. In the semidilute solution at low acceptor content, the dynamics becomes faster as compared with the pristine polymer that is explained by confinement of the coupled motions of entangled polymer chains. At high acceptor content, the dynamics is far much slower with a characteristic long-range correlation at the scale 3-5 μm that is explained by aggregation of polymer chains in clusters. One can expect that the DLS technique could become a useful tool to study the nano- and microstructure of donor-acceptor conjugated polymer blends to achieve controllable morphology in the corresponding blend films.     

A furan-containing conjugated polymer for high mobility ambipolar organic thin film transistors

Furan substituted diketopyrrolopyrrole (DBF) combined with benzothiadiazole based polymer semiconductor PDPP-FBF has been synthesized and evaluated as an ambipolar semiconductor in organic thin-film transistors. Hole and electron mobilities as high as 0.20 cm(2) V(-1) s(-1) and 0.56 cm(2) V(-1) s(-1), respectively, are achieved for PDPP-FBF.     

Interpenetrating polymer networks from polyurethanes and methacrylate polymers. II. Interpenetrating polymer networks with opposite charge groups

Interpenetrating polymer networks (IPNs) with opposite charge groups (tertiary amine and carboxyl groups) made from polyurethanes and methacrylate polymers have been synthesized and their properties and morphology, studied. With increasing carboxyl group concentration the mechanical properties and compatibility between the component networks were significantly improved, possibly because of the negative (or zero) free energy produced by the interaction contribution between the tertiary amine groups in the polyurethanes and the carboxyl groups in the methacrylate polymers determined by differential scanning calorimetry (DSC) and scanning electron microscopy (SEM). The improved molecular mixing in these IPNs was thought to be due to the influence of the opposite charge groups in these systems.     

Morphology control of conjugated microporous polymer networks for visible-light-driven oxidative coupling of amines

Morphology control of conjugated microporous polymer networks (CMPs) has emerged as a promising strategy for enhancing catalytic efficiency and alleviating product contamination in photocatalytic organic transformations. In this contribution, we present the rational design and synthesis of hollow CMPs (hPorSTZ and hPorDTZ) featuring benzothiadiazoles linkages via Sonogashira-Hagihara cross-coupling reaction onto the surface of SiO₂ microspheres, followed by the elimination of the SiO₂ inner templates. By comparing the catalytic performance of hollow and nonhollow materials, we demonstrated the impact of substrate diffusion pathway on visible-light-driven oxidative coupling of amines to imines. With a larger specific surface area and variable surface catalytically active sites, the hollow CMPs exhibited efficient reusability, which reduced the consumption of precious resources and achieve faster conversion rates while maintaining reliable recyclability, competing with their nonhollow counterparts. This morphology-controlled strategy outlines a promising route for diverse organic transformations utilizing stable, efficient, and recyclable metal-free CMPs.     

Acceptor-acceptor-type conjugated polymer semiconductors

The rapid development of electronic devices such as organic field-effect transistors (OFETs) and solar cells makes the research and development of electronic tr...     

Space charge distribution in luminescent conjugated polymers

We have used for the first time the laser intensity modulation method (LIMM) to resolve the depth profile of space charges in films of poly[(2-(2-ethylhexyl)-5-methoxy-1,4-phenylene)vinylene] (MEH-PPV), poly(pyridine-2,5-diyl) (PPY) and poly(fluorene) (PFO). The results demonstrate that in conjugated polymers space charges can not only be created but also stored permanently.     

P4VP and oligo(phenylenevinylene)‐perylenebisimide mixed donor‐acceptor supramolecular comb polymer complexes with improved charge carrier mobility

Random donor‐acceptor (D‐A) supramolecular comb polymers were formed when hydroxyl functionalized donor and acceptor small molecules based on Oligo(phenylenevinylene) (named OPVCN‐OH ) and Perylenebisimide (named UPBI‐PDP ), respectively, were complexed with Poly(4‐vinyl pyridine) (P4VP). A series of random D‐A supramolecular comb polymers were formed by varying the ratios of UPBI‐PDP and OPVCN‐OH with P4VP. A 100% P4VP‐donor polymer complex [ P4VP(OPV_1.00 )] and a 100% P4VP‐acceptor polymer complex [ P4VP(UPBI_1.00 )] were also synthesized and characterized. Complex formation was confirmed by FT‐IR and ¹H NMR spectroscopy. Solid state structural studies carried out using small angle X‐ray scattering and wide angle X‐ray diffraction experiments revealed altered packing of the D and A molecules in the complexes. Transmission electron microscopy images showed lamellar structures in the < 10 nm scale for the P4VP(OPV_1.00 ), P4VP(UPBI_1.00 ), and mixed P4VP (D‐A) complexes. The effect of the nanoscopic D‐A self‐assembly on the bulk mobility of the materials was probed using SCLC measurements. The mixed D‐A random complexes exhibited ambipolar charge transport characteristics with higher values for the average bulk hole mobility estimate. P4VP(OPV_0.25 + UPBI_0.75) exhibited an average hole mobility in the order of 10^?2cm² V^?1 s^?1 and electron mobility 10^?5cm² V^?1 s^?1. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 2403–2412     

Intrachain electron and energy transfer in conjugated organometallic oligomers and polymers

The synthesis of polymers of the type (-Cz-C[triple chemical bond]C-PtL(2)-C[triple chemical bond]C-Cz-X-)(n) along with the corresponding model compounds (Ph-PtL'(2)-C[triple chemical bond]C-Cz)(2)-X-, where Cz=3,3'-carbazole, X=nothing, Cz, or F (2,2'-fluorene), L=PBu(3), and L'=PEt(3) are reported. The electronic spectra (absorption, excitation, emission, and ns-transient spectra) and the photophysics of these species in 2-methyltetrahyrofuran (2MeTHF) at 298 and 77 K are presented. Evidence for singlet electron and triplet energy transfer from the Cz chromophore to the F moiety are provided and discussed in detail. The rate for electron transfer is very fast (>4 x 10(11) s(-1)), whereas that for triplet-triplet energy transfer is much slower (approximately 10(3) s(-1)). This work represents a very rare example of studies that address electronic communication in the backbone of a conjugated organometallic polymer.     

Raman spectroscopy of intermolecular charge transfer complex between a conjugated polymer and an organic acceptor molecule

Intermolecular donor-acceptor charge transfer complex (CTC) formed in the electronic ground state between poly[2-methoxy-5-(2-ethylhexyloxy)-1,4-phenylenevinylene] (MEH-PPV) and 2,4,7-trinitrofluorenone (TNF) has been investigated by Raman and optical absorption spectroscopies. Blending of MEH-PPV and TNF results in appearance of the CTC absorption band in the optical gap of the both components and in changes in the characteristic MEH-PPV Raman bands including shifts, change in bandwidth, and intensity. The experimental data are similar in films and solutions indicating the CTC formation in both. We associate the low-frequency shift of the strongest MEH-PPV Raman band at approximately 1580 cm(-1) reaching 5 cm(-1) with partial electron transfer from MEH-PPV to TNF amounting approximately 0.2e(-). We suggest that polymer conjugated segments can form the CTC of variable composition MEH-PPV:TNF=1:X, where X相似文献   

Effect of spatial irregularities on the temperature and field dependence of the mobility in liquid-crystalline conjugated polymer films

We have performed simulations of time-of-flight measurements via the Monte Carlo approach for films made of conjugated polymers in the liquid-crystalline phase. In spatially regular films with a distribution of on-site energies the mobility is affected by the interplay between electrostatic and thermal energy. When the width of the on-site energy distribution is comparable to the thermal energy, the mobility increases with temperature at low fields, but shows the opposite behaviour at larger fields. However, when spatial irregularities in the arrangement of the film are introduced, the mobility is enhanced at all temperatures, as the electrostatic energy plays less of a role in charge transport than thermal activation over energy barriers.     

Molecular organization in MAPLE‐deposited conjugated polymer thin films and the implications for carrier transport characteristics

The morphological structure of poly(3‐hexylthiophene) (P3HT) thin films deposited by both Matrix Assisted Pulsed Laser Evaporation (MAPLE) and solution spin‐casting methods are investigated. The MAPLE samples possessed a higher degree of disorder, with random orientations of polymer crystallites along the side‐chain stacking, π–π stacking, and conjugated backbone directions. Moreover, the average molecular orientations and relative degrees of crystallinity of MAPLE‐deposited polymer films are insensitive to the chemistries of the substrates onto which they were deposited; this is in stark contrast to the films prepared by the conventional spin‐casting technique. Despite the seemingly unfavorable molecular orientations and the highly disordered morphologies, the in‐plane charge carrier transport characteristics of the MAPLE samples are comparable to those of spin‐cast samples, exhibiting similar transport activation energies (56 vs. 54 meV) to those reported in the literature for high mobility polymers. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2017 , 55, 39–48     

Synthetic control of the pore dimension and surface area in conjugated microporous polymer and copolymer networks

A series of rigid microporous poly(aryleneethynylene) (PAE) networks was synthesized by Sonogashira-Hagihara coupling chemistry. PAEs with apparent Brunauer-Emmet-Teller surface areas of more than 1000 m(2)/g were produced. The materials were found to have very good chemical and thermal stability and retention of microporosity under a variety of conditions. It was shown that physical properties such as micropore size, surface area, and hydrogen uptake could be controlled in a "quantized" fashion by varying the monomer strut length, as for metal-organic and covalent organic frameworks, even though the networks were amorphous in nature. For the first time, it was demonstrated that these properties can also be fine-tuned in a continuous manner via statistical copolymerization of monomer struts with differing lengths. This provides an unprecedented degree of direct synthetic control over micropore properties in an organic network.