Lipase Immobilized on the Hydrophobic Polytetrafluoroethene Membrane with Nonwoven Fabric and Its Application in Intensifying Synthesis of Butyl Oleate

The synthesis of butyl oleate was studied in this paper with immobilized lipase. Five types of membrane were used as support to immobilize Rhizopus arrhizus lipase by following a procedure combining filtration and protein cross-linking. Results showed that hydrophobic polytetrafluoroethene membrane with nonwoven fabric (HO-PTFE-NF) was the favorite choice in terms of higher protein loading, activity, and specific activity of immobilized lipase. The factors including solvent polarity, lipase dosage, concentration, and molar ratio of substrate and temperature were found to have significant influence on conversion. Results showed that hexane (logP = 3.53) was a favorable solvent for the biosynthesis of butyl oleate in our studies. The optimal conditions were experimentally determined of 50 U immobilized lipase, molar ratio of oleic acid to butanol of 1.0, substrate concentration of 0.12 mol/L, temperature of 37 °C, and reaction time of 2 h. The conversion was beyond 91% and decreased slightly after 18 cycles. Lipase immobilization can improve the conversion and the repeated use of immobilized lipase relative to free lipase.     

Significantly Improved Expression and Biochemical Properties of Recombinant Serratia marcescens Lipase as Robust Biocatalyst for Kinetic Resolution of Chiral Ester

A lipase gene from Serratia marcescens ECU1010 was cloned into expression vector pET28a, sequenced, and overexpressed as an N terminus His-tag fusion protein in Escherichia coli. Through the optimization of culture conditions in shake flask, the lipase activity was improved up to 1.09 × 10⁵ U/l, which is a great improvement compared to our previous reports. It was purified to homogeneity by Ni-NTA affinity chromatography with an overall yield of 59.4% and a purification factor of 2.4-fold. This recombinant lipase displayed excellent stability below 30 °C and within the pH range of 5.0−6.8, giving temperature and pH optima at 40 °C and pH 9.0, respectively. The lipase activity was found to increase in the presence of metal ions such as Ca²⁺, Cu²⁺, and some nonionic surfactants such as PEG series. In addition, among p-nitrophenyl esters of fatty acids with varied chain length, the recombinant lipase showed the maximum activity on p-nitrophenyl laurate (C₁₂). Using racemic trans-3-(4′-methoxy-phenyl)-glycidyl methyl ester [(±)-MPGM] as substrate, which is a key chiral synthon for production of diltiazem, a 50% conversion yield was achieved after 4 h in toluene–water (100 mM KPB phosphate buffer, pH 7.5) biphasic system (5:5 ml) at 30 °C under shaking condition (160 rpm), affording (−)-MPGM in nearly 100% ee. The K _m and V _max values of the lipase for (±)-MPGM were 222 mM and 1.24 mmol min⁻¹ mg⁻¹, respectively. The above-mentioned features make the highly enantioselective lipase from Serratia marcescens ECU1010 a robust biocatalyst for practical use in large-scale production of diltiazem intermediate.     

Concentration,Partial Characterization,and Immobilization of Lipase Extract from <Emphasis Type="Italic">P. brevicompactum</Emphasis> by Solid-State Fermentation of Babassu Cake and Castor Bean Cake

One relevant limitation hindering the industrial application of microbial lipases has been attributed to their production cost, which is determined by the production yield, enzyme stability among other. The objective of this work was to evaluate the concentration and immobilization of lipase extracts from Penicillium brevicompactum obtained by solid-state fermentation of babassu cake and castor bean cake. The precipitation with ammonium sulfate 60% of saturation of crude extract obtained with babassu cake as raw material showed an enhancement in hydrolytic and esterification activities from 31.82 to 227.57 U/g and from 170.92 to 207.40 U/g, respectively. Concentrated lipase extracts showed preference to medium-chain triglycerides and fatty acids. It is shown that the enzyme activity is maintained during storage at low temperatures (4 and −10°C) for up to 30 days. Higher esterification activities were achieved when the lipase extract was immobilized in sodium alginate and activated coal.     

Enrichment in γ-linolenic acid of acylglycerols by the selective hydrolysis of borage oil

Selective hydrolysis of borage oil byCandida rugosa lipase immobilized on microporous polypropylene was carried out in an iso-octane-water two-phase system in order to obtain glycerides rich in γ-linolenic acid (GLA). Lipase was immobilized on hydrophobic microporous polypropylene supports by physical adsorption, γ-linolenic acid content in the unhydrolyzed acylglycerols could be raised to 51.7 mol% from an initial content of 23.6 mol% in borage oil with a yield of 59%. A simplified kinetic model was proposed for this selective hydrolysis. The Michaelis constantK _M and the maximal-rate constantV _max are 0.107M and 393.9 U/mg-protein, respectively. Product inhibition with a dissociation constant of the enzyme-product complexK _I = 25 mM was confirmed. Some properties of the immobilized lipase were also examined.     

Ethanol Production from Cashew Apple Bagasse: Improvement of Enzymatic Hydrolysis by Microwave-Assisted Alkali Pretreatment

In this work, the potential of microwave-assisted alkali pretreatment in order to improve the rupture of the recalcitrant structures of the cashew able bagasse (CAB), lignocellulosic by-product in Brazil with no commercial value, is obtained from cashew apple process to juice production, was studied. First, biomass composition of CAB was determined, and the percentage of glucan and lignin was 20.54 ± 0.70% and 33.80 ± 1.30%, respectively. CAB content in terms of cellulose, hemicelluloses, and lignin, 19.21 ± 0.35%, 12.05 ± 0.37%, and 38.11 ± 0.08%, respectively, was also determined. Results showed that, after enzymatic hydrolysis, alkali concentration exerted influence on glucose formation, after pretreatment with 0.2 and 1.0 mo L⁻¹ of NaOH (372 ± 12 and 355 ± 37 mg g_glucan⁻¹) when 2% (w/v) of cashew apple bagasse pretreated by microwave-assisted alkali pretreatment (CAB-M) was used. On the other hand, pretreatment time (15–30 min) and microwave power (600–900 W) exerted no significant effect on hydrolysis. On enzymatic hydrolysis step, improvement on solid percentage (16% w/v) and enzyme load (30 FPU g_CAB-M⁻¹) increased glucose concentration to 15 g L⁻¹. The fermentation of the hydrolyzate by Saccharomyces cerevesiae resulted in ethanol concentration and productivity of 5.6 g L⁻¹ and 1.41 g L⁻¹ h⁻¹, respectively.     

Enhancement of the Activity and Enantioselectivity of Lipase by Sol–Gel Encapsulation Immobilization onto β-cyclodextrin-Based Polymer

Candida rugosa lipase was encapsulated within a chemically inert sol–gel support prepared by polycondensation with tetraethoxysilane and octyltriethoxysilane in the presence of β-cyclodextrin-based polymer. The catalytic activity of the encapsulated lipases was evaluated both in the hydrolysis of p-nitrophenylpalmitate and the enantioselective hydrolysis of racemic Naproxen methyl ester. It has been observed that the percent activity yield of the encapsulated lipase was 65 U/g, which is 7.5 times higher than that of the covalently immobilized lipase. The β-cyclodextrin-based encapsulated lipases had higher conversion and enantioselectivity compared with covalently immobilized lipase. The study confirms an excellent enantioselectivity (E >300) for the encapsulated lipase with an enantiomeric excess value of 98% for S-naproxen.     

Immobilization of Naringinase in PVA–Alginate Matrix Using an Innovative Technique

A synthetic polymer, polyvinyl alcohol (PVA), a cheap and nontoxic synthetic polymer to organism, has been ascribed for biocatalyst immobilization. In this work PVA–alginate beads were developed with thermal, mechanical, and chemical stability to high temperatures (<80 °C). The combination of alginate and bead treatment with sodium sulfate not only prevented agglomeration but produced beads of high gel strength and conferred enzyme protection from inactivation by boric acid. Naringinase from Penicillium decumbens was immobilized in PVA (10%)–alginate beads with three different sizes (1–3 mm), at three different alginate concentrations (0.2–1.0%), and these features were investigated in terms of swelling ratio within the beads, enzyme activity, and immobilization yield during hydrolysis of naringin. The pH and temperature optimum were 4.0 and 70 °C for the PVA–alginate-immobilized naringinase. The highest naringinase activity yield in PVA (10%)–alginate (1%) beads of 2 mm was 80%, at pH 4.0 and 70 °C. The Michaelis constant (K _Mapp) and the maximum reaction velocity (V _maxapp) were evaluated for both free (K _Mapp = 0.233 mM; V _maxapp = 0.13 mM min⁻¹) and immobilized naringinase (K _Mapp = 0.349 mM; V _maxapp = 0.08 mM min⁻¹). The residual activity of the immobilized enzyme was followed in eight consecutive batch runs with a retention activity of 70%. After 6 weeks, upon storage in acetate buffer pH 4 at 4 °C, the immobilized biocatalyst retained 90% of the initial activity. These promising results are illustrative of the potential of this immobilization strategy for the system evaluated and suggest that its application may be effectively performed for the entrapment of other biocatalysts.     

α-Mannosidases from the Digestive Fluid of <Emphasis Type="Italic">Rhynchophorus Palmarum</Emphasis> Larvae as Novel Biocatalysts for Transmannosylation Reactions

Two biological fluids, namely hemolymph and digestive fluid from the larval stage of Rhynchophorus palmarum Linneaus, a serious pest in agroecosystem exploiting oil palm, were screened for hydrolytic activities, by the use of synthetic and natural glycoside substrates. Several exo and endoglycosidase activities were observed but, the interesting α-mannosidase activity (0.41 ± 0.04 UI) had attracted our attention. So, we have previously demonstrated that this activity harbours four distinctive α-mannosidase isoforms named RpltM, RplM1, RplM2 and RplM3. We have extended this work to determine the ability of these enzymes to catalyze synthesis reactions. Finally, we have revealed that, α-mannosidases from the digestive fluid of R. palmarum larvae catalyze transmannosylation reactions. The stability of the enzymes and the optimization of the transfer product yield were studied as functions of pH, enzyme unit, starting concentration of donor or acceptor and time. It was shown that, in experimental optimum conditions, average yields of 12.34 ± 0.75, 12.15 ± 0.79, 5.59 ± 0.35 and 8.43 ± 0.50% were obtained for the α-mannosidases RpltM, RplM1, RplM2 and RplM3, respectively. On the basis of this work, α-mannosidases from the digestive fluid of Rhynchophorus palmarum larvae appear to be a valuable tool for the preparation of neoglycoconjugates.     

Improving Stability and Activity of Cross-linked Enzyme Aggregates Based on Polyethylenimine in Hydrolysis of Fish Oil for Enrichment of Polyunsaturated Fatty Acids

Cross-linking of enzyme aggregates from recombinant Geotrichum sp. lipase based on polyethylenimine (PEI) was applied to hydrolyze fish oil for enrichment of polyunsaturated fatty acids successfully. Through acetone precipitation and cross-linking of physical aggregates using glutaraldehyde in the presence of PEI, firmly cross-linked enzyme aggregates (PEI-CLEAs) were prepared. They could maintain more than 65% of relative hydrolysis degree after incubation in the range of 50–55 °C for 4 h and maintain more than 85% of relative hydrolysis degree after being treated by acetone, tert-butyl alcohol and octane for 4 h. PEI-CLEAs increased hydrolysis degree to 42% from 12% by free lipase. After five batch reactions, PEI-CLEAs still maintained 72% of relative hydrolysis degree. Hydrolysis of fish oil by PEI-CLEAs produced glycerides containing concentrated EPA and DHA in good yield. PEI-CLEAs had advantages over general CLEAs and free lipase in initial reaction rate, hydrolysis degree, thermostability, organic solvent tolerance and reusability.     

Determination of fatty acid compositions and cholesterol levels of some freshwater fish living in Porsuk Dam,Turkey

We determined the oil content, fatty acid composition, and cholesterol content of common carp (Cyprinus carpio), crucian carp (Carassius carassius), chub (Leusiscus cephalus), and tench (Tinca tinca) by GLC. The saturated fatty acids (SFA), monounsaturated fatty acids (MUFA), and polyunsaturated fatty acids (PUFA) levels were found to be 36.49%, 31.92%, 31.59% in common carp; 32.92%, 32.21%, and 34.87% in crucian carp; 36.19%, 32.91%, and 30.90% in chub; and 32.86%, 30.77%, and 36.37% in tench, respectively. The cholesterol (mg/100 g oil) levels of common carp, crucian carp, chub, and tench were determined by GLC methods as 119 ± 2.64 mg, 170.37 ± 2.36 mg, 94.68 ± 3.13 mg, and 179.84 ± 6.75 mg, respectively. Thus, the cholesterol contents of the analyzed freshwater fish species were low but their PUFA contents and nutritional values were high. Published in Khimiya Prirodnykh Soedinenii, No. 1, pp. 15–17, January–February, 2009.     

Xylanase Production by <Emphasis Type="Italic">Penicillium canescens</Emphasis> on Soya Oil Cake in Solid-State Fermentation

There is an increasing interest for the organic residues from various sectors of agriculture and industries over the past few decades. Their application in the field of fermentation technology has resulted in the production of bulk chemicals and value-added products such as amino acid, enzymes, mushroom, organic acids, single-cell protein, biologically active secondary metabolites, etc. (Ramachandran et al., Bioresource Technology 98:2000–2009, 2007). In this work, the production of extracellular xylanase by the fungus Penicillium canescens was investigated in solid-state fermentation using five agro-industrial substrates (soya oil cake, soya meal, wheat bran, whole wheat bran, and pulp beet). The best substrate was the soya oil cake. In order to optimize the production, the most effective cultivation conditions were investigated in Erlenmeyer flasks and in plastic bags with 5 and 100 g of soya oil cake, respectively. The initial moisture content, initial pH, and temperature of the culture affected the xylanase synthesis. The optimal fermentation medium was composed by soya oil cake crushed to 5 mm supplemented with 3% and 4% (w/w) of casein peptone and Na₂HPO₄.2H₂O. After 7 days of incubation at 30 °C and under 80% of initial moisture, a xylanase production level of 18,895 ± 778 U/g (Erlenmeyer flasks) and 9,300 ± 589 U/g (plastic bags) was reached. The partially purified enzyme recovered by ammonium sulfate fractionation was completely stable at freezing and refrigeration temperatures up to 6 months and reasonably stable at room temperature for more than 3 months.     

Cellulases and Xylanases Production by <Emphasis Type="Italic">Penicillium echinulatum</Emphasis> Grown on Sugar Cane Bagasse in Solid-State Fermentation

To investigate the production of cellulases and xylanases from Penicillium echinulatum 9A02S1, solid-state fermentation (SSF) was performed by using different ratios of sugar cane bagasse (SCB) and wheat bran (WB). The greatest filter paper activity obtained was 45.82 ± 1.88 U gdm⁻¹ in a culture containing 6SCB/4WB on the third day. The greatest β-glucosidase activities were 40.13 ± 5.10 U gdm⁻¹ obtained on the third day for the 0SCB/10WB culture and 29.17 ± 1.06 U gdm⁻¹ for the 2SCB/8WB culture. For endoglucanase, the greatest activities were 290.47 ± 43.57 and 276.84 ± 15.47 U gdm⁻¹, for the culture 6SCB/4WB on the fourth and fifth days of cultivation, respectively. The greatest xylanase activities were found on the third day for the cultures 6SCB/4WB (36.38 ± 5.38 U gdm⁻¹) and 4SCB/6WB (37.87 ± 2.26 U gdm⁻¹). In conclusion, the results presented in this article showed that it was possible to obtain large amounts of cellulases and xylanases enzymes using low-cost substrates, such as SCB and WB.     

A Superoxide Dismutase Purified from the Rhizome of <Emphasis Type="Italic">Curcuma aeruginosa</Emphasis> Roxb. as Inhibitor of Nitric Oxide Production in the Macrophage-like RAW 264.7 Cell Line

Superoxide dismutase (SOD, EC 1.15.1.1) is a metalloenzyme or antioxidant enzyme that catalyzes the disproportionation of the harmful superoxide anionic radical to hydrogen peroxide and molecular oxygen. Due to its antioxidative effects, SOD has long been applied in medicinal treatment, cosmetic, and other chemical industries. Fifteen Zingiberaceae plants were tested for SOD activity in their rhizome extracts. The crude homogenate and ammonium sulfate cut fraction of Curcuma aeruginosa were found to contain a significant level of SOD activity. The SOD enzyme was enriched 16.7-fold by sequential ammonium sulfate precipitation, diethylaminoethyl cellulose ion exchange, and Superdex 75 gel filtration column chromatography. An overall SOD yield of 2.51 % with a specific activity of 812.20 U/mg was obtained. The enriched SOD had an apparent MW of 31.5 kDa, as judged by sodium dodecyl sulfate polyacrylamide gel electrophoresis, and a pH and temperature optima of 4.0 and 50 °C. With nitroblue tetrazolium and riboflavin as substrates, the K _m values were 57.31 ± 0.012 and 1.51 ± 0.014 M, respectively, with corresponding V _max values of 333.7 ± 0.034 and 254.1 ± 0.022 μmol min⁻¹ mg protein⁻¹. This SOD likely belongs to the Fe- or Mn-SOD category due to the fact that it was insensitive to potassium cyanide or hydrogen peroxide inhibition, but was potentially weakly stimulated by hydrogen peroxide, and stimulated by Mn²⁺and Fe²⁺ ions. Moreover, this purified SOD also exhibited inhibitory effects on lipopolysaccharide-induced nitric oxide production in cultured mouse macrophage cell RAW 264.7 in a dose-dependent manner (IC₅₀ = 14.36 ± 0.15 μg protein/ml).     

An advanced LC-MS (Q-TOF) technique for the detection of amino acids in atmospheric aerosols

Methodology for detection of native (underivatized) amino acids (AA) in atmospheric aerosols has been developed. This article describes the use of LC-MS (Q-TOF) and microwave-assisted gas phase hydrolysis for detection of free and combined amino acids in aerosols collected in a Southeastern U.S. forest environment. Accurate mass detection and the addition of isotopically labeled surrogates prior to sample preparation allows for sensitive quantitation of target AA in a complex aerosol matrix. A total of 16 native AA were detected above the reporting threshold as water-soluble free AA, with an average concentration of 22 ± 9 ng m⁻³ (N = 13). Following microwave-assisted gas phase hydrolysis, the total AA concentration in the forest environment increased significantly (70 ± 35 ng m⁻³) and additional compounds (methionine, isoleucine) were detected above the reporting threshold. The ability to quantify AA in aerosol samples without derivatization reduces time-consuming preparation procedures while providing the advancement of selective mass determination for important organic nitrogen (ON) species. Details on sample preparation that eliminates the freeze-drying approach typically practiced for water removal with biological samples, and vapor phase microwave hydrolysis parameters are provided. Method application for determination of atmospheric ON is discussed.     

Stagewise Dilute-Acid Pretreatment and Enzyme Hydrolysis of Distillers’ Grains and Corn Fiber

Distillers’ grains and corn fiber are the coproducts of the corn dry grind and wet milling industries, respectively. Availability of distillers’ grains and corn fiber at the ethanol plant and their high levels of lignocellulosic material make these coproducts attractive feedstocks for conversion to ethanol. In this study, dilute sulfuric acid hydrolysis of these coproducts was investigated in a multistage scheme. After the completion of each pretreatment stage, the liquid substrate was separated and reused in the succeeding pretreatment stage with a fresh substrate. The substrate from each stage was also subjected to enzyme hydrolysis in a separate experiment. The sulfuric acid concentration and the substrate loading were maintained at 1.0 vol% and 15.0 wt.%, respectively, and the temperature was maintained at 120 °C in all the experiments. Experiments were also performed to study the effect of removing oil from the samples prior to the pretreatment. The highest concentration of monomeric sugars (MS) was observed when three stages of pretreatment were followed by the enzyme reaction. The enzyme hydrolysis of the three-stage pretreated dried distillers’ grains and corn fiber yielded 122.6 ± 5.8 and 184.5 ± 4.1 mg/mL of MS, respectively. The formation of inhibitory products was also monitored.     

High Level Expression of an Acid-Stable Phytase from <Emphasis Type="Italic">Citrobacter freundii</Emphasis> in <Emphasis Type="Italic">Pichia pastoris</Emphasis>

To obtain a high level expression of phytase with favorable characteristics, a codon-optimized phytase gene from Citrobacter freundii was synthesized and transferred into Pichia pastoris. Small-scale expression experiments and activity assays were used to screen positive colonies. After purified by Ni²⁺–NTA agarose affinity column, the characterizations of the recombinant phytase were determined. The recombinant phytase (r-phyC) had two distinct pH optima at 2.5 and 4.5 and an optimal temperature at 50 °C. It retained more than 80% activity after being incubated under various buffer (pH 1.5–8.0) at 37 °C for 1 h. The specific activity, Km, and Vmax values of r-phyC for sodium phytate were 2,072 ± 18 U mg⁻¹, 0.52 ± 0.04 mM, and 2,380 ± 84 U mg⁻¹ min⁻¹, respectively. The enzyme activity was significantly improved by 1 mM of K⁺, Ca²⁺, and Mg²⁺. These characteristics contribute to its potential application in feed industry.     

The Effect of pH on Continuous Biohydrogen Production from Swine Wastewater Supplemented with Glucose

The effect of pH on hydrogen production from liquid swine manure supplemented with glucose by a mixed culture of fermentative bacteria in an anaerobic sequencing batch reactor was evaluated in this study. At 37 ± 1 °C, five pH values ranging from 4.7 to 5.9 at an increment of 0.3 were tested at a hydraulic retention time (HRT) of 16 h. The results showed that at this HRT, the optimal pH for hydrogen production was 5.0, under which the biogas comprised 33.57 ± 5.65% of hydrogen with a production rate of 8.88 ± 2.94 L-H₂/day and a yield of 1.48 ± 0.49 L-H₂/L liquid swine manure. The highest biomass concentration, highest butyric acid to acetic acid ratio, lowest propionic acid concentration, and the best stability were all found at pH 5.0, while the highest CH₄ productivity was found at pH 5.9. For efficient hydrogen production, oxygen content should be controlled under 2%, beyond which an inverse linear relationship (R ² = 0.986) was observed.     

Immobilization of Phenylalanine Dehydrogenase and Its Application in Flow-Injection Analysis System for Determination of Plasma Phenylalanine

Phenylalanine dehydrogenase (l-PheDH) from Sporosarcina ureae was immobilized on DEAE-cellulose, modified initially with 2-amino-4,6-dichloro-s-triazine followed by hexamethylenediamine and glutaraldehyde. The highest activity of immobilized PheDH was determined as 95.75 U/g support with 56% retained activity. The optimum pH value of immobilized l-PheDH was shifted from pH 10.4 to 11.0. The immobilized l-PheDH showed activity variations close to the maximum value in a wider temperature range of 45–55 °C, whereas it was 40 °C for the native enzyme. The pH and the thermal stability of the immobilized l-PheDH were also better than the native enzyme. At pH 10.4 and 25 °C, K _m values of the native and the immobilized l-PheDH were determined as K _{m Phe} = 0.118, 0.063 mM and K _{m NAD}⁺ = 0.234, 0.128 mM, respectively. Formed NADH at the exit of packed bed reactor column was detected by the flow-injection analysis system. The conversion efficiency of the reactor was found to be 100% in the range of 5–600 μM Phe at 9 mM NAD⁺ with a total flow rate of 0.1 mL/min. The reactor was used for the analyses of 30 samples each for 3 h per day. The half-life period of the reactor was 15 days.     

Production and Characterization of an Alkaline Thermostable Crude Lipase from an Isolated Strain of <Emphasis Type="Italic">Bacillus cereus</Emphasis> C<Subscript>7</Subscript>

A bacterial strain isolated from spoiled coconut and identified as Bacillus cereus was found capable of producing alkaline thermostable extracellular lipase. Optimum temperature, time, and pH for enzyme substrate reaction were found to be 60 °C, 10 min, and 8.0 respectively. Common surfactants except Triton X 100 and cetyltrimethylammonium bromide have no or very little inhibitory effects on enzyme activity. The enzyme was found to be stable in presence of oxidizing agents and protease enzyme. The maximum lipase production was achieved at 30–33 °C, pH 8.0 on 24 h of fermentation using 50 ml medium in a 250-ml Erlenmeyer flask. The superior carbon and nitrogen sources for lipase production were starch (2%) and ammonium sulfate (nitrogen level 21.2 mg/100 ml), peptone (nitrogen level 297 mg/100 ml), and urea (nitrogen level 46.62 mg/100 ml) in combination, respectively. The maximum enzyme activity obtained was 33 ± 0.567 IU/ml.     

A compact miniaturized continuous flow system for the determination of urea content in milk

A multicommutation-based flow system with photometric detection was developed, employing an analytical microsystem constructed with low temperature co-fired ceramics (LTCC) technology, a solid-phase reactor containing particles of Canavalia ensiformis DC (urease source) immobilized with glutaraldehyde, and a mini-photometer coupled directly to the microsystem which monolithically integrates a continuous flow cell. The determination of urea in milk was based on the hydrolysis of urea in the solid-phase reactor and the ammonium ions produced were monitored using the Berthelot reaction. The analytical curve was linear in the urea concentration range from 1.0 × 10⁻⁴ to 5.0 × 10⁻³ mol L⁻¹ with a limit of detection of 8.0 × 10⁻⁶ mol L⁻¹. The relative standard deviation (RSD) for a 2.0 × 10⁻³ mol L⁻¹ urea solution was lower than 0.4% (n = 10) and the sample throughput was 13 h⁻¹. To check the reproducibility of the flow system, calibration curves were obtained with freshly prepared solutions on different days and the RSD obtained was 4.7% (n = 6). Accuracy was assessed by comparing the results of the proposed method with those from the official procedure and the data are in close agreement, at a 95% confidence level.