The effect of electrolytes on the reaction rates and acid-base equilibria in ionic micelles

The influence of a number of electrolytes on the micellar effect of cetyltrimethylammoniurn bromide (CTAB) in the hydrolysis ofp-nitrophenyl acetate (1) and bis(p-nitrophenyl) methylphosphonate (2) and in the course of the acid-base dissociation of thep-nitroanilide of bis(chloromethyl)phosphinic acid (3) has been examined. The activity of the salts studied increases in the following order: MeCOOK2CO₃3<p-MeC₆H₄SO₃K. It has been found that in the presence of electrolytes the catalytic effect of CTAB micelles in the hydrolysis reactions of esters1 and2 decreases, and the pK _a value of anilide3 increases. The results obtained are interpreted in terms of the pseudophase model of micellar catalysis. The analysis of the experimental data carried out using logarithmic coordinates revealed a relationship between phase transitions in micellar catalysis and in micellization.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 8, pp. 1396–1400, August, 1993.     

On the binding of calcium by micelles composed of carboxy-modified pluronics measured by means of differential potentiometric titration and modeled with a self-consistent-field theory

We perform differential potentiometric titration measurements for the binding of Ca2+ ions to micelles composed of the carboxylic acid end-standing Pluronic P85 block copolymer (i.e., CAE-85 (COOH-(EO)26-(PO)39-(EO)26-COOH)). Two different ion-selective electrodes (ISEs) are used to detect the free calcium concentration; the first ISE is an indicator electrode, and the second is a reference electrode. The titration is done by adding the block copolymers to a known solution of Ca2+ at neutral pH and high enough temperature (above the critical micellization temperature CMT) and various amount of added monovalent salt. By measuring the difference in the electromotive force between the two ISEs, the amount of Ca2+ that is bound by the micelles is calculated. This is then used to determine the binding constant of Ca2+ with the micelles, which is a missing parameter needed to perform molecular realistic self-consistent-field (SCF) calculations. It turns out that the micelles from block copolymer CAE-85 bind Ca2+ ions both electrostatically and specifically. The specific binding between Ca2+ and carboxylic groups in the corona of the micelles is modeled through the reaction equilibrium -COOCa+ <==> -COO- + Ca2+ with pKCa = 1.7 +/- 0.06.     

Dissociation behaviors of carboxyl and amine groups on carboxymethyl‐chitosan in aqueous system

Several carboxymethyl‐chitosan (CMCS) samples with different deacetylation degree and/or substituted degree were prepared from the carboxymethylation reaction of chitosan under soft conditions. The products were dissolved in standard HCl aqueous solution to carry out potentiometric titration by using NaOH as titrating solution at different ionic strengths. Then the dissociation behaviors of protonated carboxyl and amine groups were investigated under their degree of dissociation (α) and protonation constant (pK_α) had been calculated. Moreover, influences of the intrinsic and extrinsic parameters on the dissociation behavior of CMCS were also considered in this article. As a result, dissociations of carboxyl and amine on CMCS exhibited unusual behaviors in comparison with carboxyl of carboxymethyl‐cellulose and amine groups of chitosan, respectively. The pK_α values of carboxyl declined slightly at early dissociation stage but subsequently maintained constant. In contrast, the pK_α of ammonium increased with its dissociation degree despite that there was an inflexed change on its dissociation curve. The potentiometric behavior of carboxyl was hardly affected by variation of deacetylation degree or substituted degree. However, these intrinsic parameters played more important role on dissociations of ammonium on CMCS. The ionic strength of media could bring screening effect on dissociaciation of both sorts of ionizable groups of CMCS. By increasing the ionic strength of media, screening effect on dissociations increased significantly. © 2008 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 46: 1419–1429, 2008     

Interaction between primary aliphatic amines and carboxylic acid esters in aqueous micellar solutions of cationic surfactants

The effects of cetylpyridinium bromide (CPB) on the acid-base equilibria of primary aliphatic amines and on the kinetics of reactions of the amines withp-nitrophenyl acetate (PNPA) andp-nitrophenyl caprylate (PNPC) were studied by potentiometric titration and UV spectroscopy. The values of apparent pK _a of the amines in the micellar phase, binding constants of their neutral forms, and the surface potentials of micelles were determined. Cetylpyridinium bromide accelerates the aminolysis of PNPA by factors of 3 to 8 by forming mixed micellar aggregates with the amines. The shift of pK _a values of the amines in micellar solutions is not the only factor that enhances their reactivity. The substrate specificity was found: in contrast to the reaction with PNPA, CPB accelerates (by factors of 15 to 65) or retards (by factors of 4 to 6) the aminolysis of PNPA depending on the hydrophobicity of the nucleophilic reagent. The binding constants of substrates, the rate constants in the micellar phase, and the critical concentrations of micellization were determined from the data obtained. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 7, pp. 1333–1338, July, 1998.     

Interactions of Puerarin with Micelles: p<Emphasis Type="Italic">K</Emphasis><Subscript>a</Subscript> Shifts and Thermodynamics

In this paper, the effect of varying hydrophobic chain lengths on the acid-base equilibrium of an isoflavone, puerarin, in cationic micelles has been studied. The interaction of puerarin with three types of micelles of identical positively charged head groups and varying tail lengths, viz., DTAB, TTAB and CTAB, shows that there is a shift in the apparent pK _a in the direction that favors the displacement of the acid-base equilibrium of puerarin towards the base form. The relative location depth of puerarin in micelles is determined according to their dielectric values (D) taking into account that lower D values correspond to deeper location. It is evident that the reduction of polarity favors the deprotonation of puerarin. The isothermal titration calorimetry measurements show that the effect of puerarin on the thermodynamic properties of micellization is enhanced in the order CTAB>TTAB>DTAB and the results illustrate that puerarin has more affinity for micelles with greater chain length.     

Acid-base properties of solid polyelectrolytes: Dissociation of cellulosic polyanions

The potentiometric titration behavior of nitrogen dioxide and periodate-chlorite oxycellulose has been studied both in the presence and absence of sodium chloride. The apparent pK values in general increase with increasing degree of dissociation, but the reverse is true for periodate-chlorite oxycellulose in the absence of added salt. This behavior is interpreted in terms of electrostatic and hydrogen bonding interaction of carboxyl groups. The Gibbs–Donnan theory of polyaid dissociation was applied to calculate the intrinsic dissociation constant pK′₀. Assuming a model having a uniform potential distributin throughout the fiber, good agreement with the expected value of 3.24 was found (compared to pK′₀ = 3.25 calculated for periodate-chlorite oxycellulose).     

Interaction of pyrimethamine and sulfadiazine with ionic and neutral micelles: Electronic absorption and fluorescence studies

The binding of two antitoxoplasmosis drugs, pyrimethamine (PYR) and sulfadiazine (SDZ) to cationic cetyltrimethylammonium chloride (CTAC), anionic sodium dodecylsulfate (SDS), zwiterionic N-hexadecyl-N,N-dimethyl-2-ammonium-1-propanesulfonate (HPS) and neutral polyoxyethylene-dodecyl-ether (Brij-35^®) micelles was studied using absorption and fluorescence spectroscopic methods. The pK_a of PYR changed in the presence of charged anionic, cationic and zwiterionic micelles, indicating that interaction is influenced by the micellar charge. For SDZ, pK_a changes were lower than 1 for all micelles, suggesting the occurrence of low binding constants in addition to a reasonable influence of the micellar charge. The values of binding constants K_b, obtained from fluorescence measurements, for PYR to CTAC micelles were very low at pH 4.0, where the drug is in a complete protonated state, increasing at pH 9.0 to long-chained CTAC and HPS micelles since this factor also favors accomodation of the neutral drug in the hydrophobic compartments. For SDZ the binding constants were determined from optical absorption measurements. Low binding constants were observed to charged surfactant micelles, with influence of micellar charge. It must be stated however that those values can be underestimated due to the relatively low sensitivity of the method based on absorption measurements.     

A potentiometric titration study on the dissociation of bile acids related to the mode of interaction between different head groups of nonionic surfactants with free bile salts upon mixed micelle formation in water

By constructing an elaborate set of potentiometric titration together with data analysis system, apparent acid dissociation indices (pK _a ^app ) for two bile acids were determined in the mixed surfactant system of bile salts (Sodium Deoxycholate, NaDC, and Sodium Chenodeoxycholate, NaCDC) with nonionic surfactants (Hexaethyleneglycol monon-dodecylether, C₁₂E₆, Decanoyl-N-methylglucamide, MEGA-10) in aqueous solution at ionic strength 1.5 as a function of mole fraction in the surfactant mixture. It was found that with increasing the bile salt concentration, pK _a ^app as well as pH showed an abrupt rise at a certain concentration of the bile salt being regardable as a critical micellization concentration (CMC) and reached a constant value at the range sufficiently higher than CMC for each pure bile salt system, meaning that the dissociation degree of carboxyl group in micelle is smaller than that in bulk. In the mixed systems of free bile salts with nonionic surfactants, the dissociation state of carboxyl groups in mixed micelles depends on the species of hydrophilic group of nonionic surfactants as well as on mole fraction in the surfactant mixture.     

On the Kinetics of Heterogeneous Free Radical Crosslinking Polymerization1)

Abstract

In this paper, two oximato complexes, mononuclear [Cu(Hdmg)₂] and binuclear [Cu₂(Hdmg)₂(H₂dmg)]ClO₄ · H₂O (H₂dmg: dimethylglyoxime), were synthesized and characterized. Hydrolyses of carboxyl acid esters, p‐nitrophenyl picolinate (PNPP) and p‐nitrophenyl acetate (PNPA), catalyzed by these two complexes were investigated in different micellar systems in the pH range from 6.58–8.65 at 25°C. The results obtained indicate that these two complexes exhibit good catalytic function. It also appears that both complexes accelerate the hydrolytic cleavage of PNPP and PNPA in cationic CTAB micellar solution faster than that in nonionic Brij35 micellar solution, which may be due to the different coordinating ability of substrates to complexes and electrostatic interaction between micelles and complexes. For binuclear Cu(II), the rate constant (k _N) for the hydrolysis of PNPA is about two times larger than that for PNPP in CTAB micellar solution, while in Brij35 micellar solution, the k _N values for PNPA and PNPP are roughly the same. This small difference may be ascribed to the configurations of intermediates formed during the reaction and electrostatic interaction between micelles and reactants.     

Thermodynamics and kinetics on micelle formation of a nonamphiphilic poly(vinylphenol)-<Emphasis Type="Italic">block</Emphasis>-polystyrene by α,ω-diamine

A poly(vinylphenol)-block-polystyrene diblock copolymer (PVPh-b-PSt) forms micelles in the presence of 1,4-butanediamine (BDA) in 1,4-dioxane, a nonselective solvent. The micellization proceeds through the formation of hydrogen bond cross-linking between the PVPh blocks via BDA, and the dissociation and reconstruction of the micelles is reversibly controlled by temperature. We explored the thermodynamics and kinetics on the micellization of the nonamphiphilic PVPh-b-PSt copolymer by BDA. Light scattering studies demonstrated that an equilibrium existed between the micelles and the unimers. The equilibrium constants were determined for the dissociation and the reconstruction of the micelles on the basis of variation in the aggregation number of the micelles. The equilibrium constant of the dissociation showed a good agreement with the reciprocal of the equilibrium constant of the reconstruction. Based on the equilibrium constants, the standard Gibbs energy, enthalpy, and entropy of the dissociation and reconstruction were estimated. The standard enthalpy was Δ H° = 30–40 kJ mol⁻¹ for the dissociation. The enthalpy of the reconstruction was obtained as a negative value, however, there was a negligible difference in the absolute values of Δ H° between the dissociation and the reconstruction. The rate constant of the micellization was ca. 10² times larger than the back reaction, and increased with a decrease in the temperature.     

Critical Micellization Concentration of Ionic Surfactants: Comparison of Theoretical and Experimental Results

Theoretically calculated critical micellization concentration (CMC) of an ionic surfactant and the corresponding experimental value (CMC₀) are compared. The CMC values are calculated within the framework of the quasi-chemical model. The CMC₀ values are determined by the extrapolation of two linear parts of a dependence of a solution property on surfactant overall concentration. These parts of the aforementioned dependences correspond to the premicellar and micellar regions. The difference between CMC and CMC₀ is found to be negligible and comparable with the measurement error. Cases in which this difference must be taken into account when estimating the properties of micellar solutions are discussed. It is shown that the micellization constant K _c of surfactant molecules can be calculated from the data on CMC₀.     

Effects of Nonionic, Cationic, and Mixed Nonionic-Cationic Surfactants on the Acid-Base Behavior of Phenyl Salicylate

The effects of Brij 35 micelles, CTABr micelles, and mixed Brij 35–CTABr micelles on the acid–base behavior of phenyl salicylate (PST) have been studied in aqueous solution containing 2% v/v acetonitrile. The apparent pK_b (pK^app_b) of PST is decreased by 1.5 pK units with the increase in [Brij 35] from 0 to 0.02 M which is attributed to micellar medium effect. The values of pK^app_b remain almost independent of [CTABr] within its range 0.01–0.03 M. The increase in [CTABr] from 0 to 0.03 M in aqueous solution containing 0.02 M Brij 35 has not resulted in a change in pK^app_b. This shows that the characeristic structural features of nonionic Brij 35 micelles remain essentially unchanged on addition of CTABr under the present experimental conditions.     

Investigation on the basic hydrolysis of crystal violet in mixed reverse micelles formed with AOT and nonionic surfactants

 The kinetics and thermodynamics of the basic hydrolysis of crystal violet (CV) in mixed reverse micelles formed with anionic surfactant AOT and nonionic surfactants have been investigated. It was found that the mixed reverse micelles had inhibitory effects on CV hydrolysis compared with the normal aqueous solution, and the equilibrium constant K of the reaction in mixed reverse micellar systems is smaller than that in pure water. The influence of water content and surfactant composition in reverse micelles on the second-order rate constant k ₁ of the positive reaction, on the first-order rate constant k _-1 of the reverse reaction, as well as on the equilibrium constant K of the reaction has been studied, and the results obtained were interpreted in terms of the nature of surfactants and the properties of microenvironment where the reaction took place. Received: 24 October 1997 Accepted: 18 March 1998     

Hydrolysis of carboxylate and phosphate esters using monopyridinium oximes in cationic micellar media

The reactions of p‐nitrophenyl acetate (PNPA) with a series of monopyridinium oximes, viz. 2‐PAM (2‐hydroxyiminomethyl‐1‐methylpyridinium iodide), 3‐PAM (3‐hydroxyiminomethyl‐1‐methylpyridinium iodide), and 4‐PAM (4‐hydroxyiminomethyl‐1‐methylpyridinium iodide) have been studied in the presence of cationic surfactants of same hydrophobic chain length (C₁₆) within the concentration range of 0.5–6.0 mM at pH 8.0 under the pseudo‐first‐order condition. The observed rate constant (k_obs) increases with increasing surfactant concentration culminating into a maximum, and this has been analyzed in detail following the concepts of micellar catalysis. The structure–activity relationship of the investigated oximes has been discussed, and 2‐PAM was found to be the most reactive among all the three investigated oximes for the cleavage of PNPA. Esterolytic decomposition of p‐nitrophenyldiphenyl phosphate with oximate ions (? CH?NO^?) was followed in cetyltrimethylammonium bromide micelles at pH 9.0, and 4‐PAM was the most reactive oxime for the micellar hydrolysis of phosphate ester. The apparent acid dissociation constants (pK_a) of the investigated oximes have been determined spectrophotometrically. © 2011 Wiley Periodicals, Inc. Int J Chem Kinet 43: 569–578, 2011     

Water-induced micellar structure change in Pluronic P103/water/o-xylene ternary system

Both laser light scattering (LLS) and small-angle X-ray scattering (SAXS) were used to study the water-induced formation and structure of micelles and supramolecules of Pluronic P103 [(EO)₁₇(PO)₆₀(EO)₁₇] in o-xylene, a selective solvent for the long middle block. In pure o-xylene, P103 molecules exist as unimer coils with an equivalent hard-sphere radius of 1.6 nm even at fairly high concentrations. Micelles with a PEO/water core and a PPO dominated corona were formed in the presence of water when the P103 concentration ≥0.046 g/mL. The size and structure of micelles have been studied as a function of solubilized water content Z (the molar ratio of water to EO units) in micelles. The micelles change from a somewhat open structure with some EO units either dangling out of the micellar core or being incorporated into neighboring micellar cores at low Z values to a flower-like structure with relatively sharp interface at high Z values. At low Z values (< about 2.9), micelles tend to have a structure with part of the poorly solvated PEO blocks present in the corona. With more water added to the core, the PEO blocks in the corona gradually entered into the core, and the PPO blocks backfolded to form loops. With increasing Z, the micellar core radius, R_c, and the hard-sphere volume fraction, ϕ, of micelles increased; the aggregation number, N, kept nearly a constant; but the hydrodynamic radius, 〈R_h〉₀, and the corona thickness, R_s, decreased. At high Z values (> about 2.9), micelles have a flower-like structure with the two end PEO blocks belonging to the small micellar core. With increasing Z, the values of R_c, ϕ, and N increased, while R_s kept nearly a constant. In the concentrated regime (C > 0.30 g/mL), a stiff polymer network at a critical ϕ value of 0.49 was formed. The supramolecular structures with a face-center cubic packing, and a possible hexagonal packing at higher polymer concentrations (i.e. > 0.55 g/mL), were observed, respectively. © 1998 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 36: 889–900, 1998     

Oxidation-induced micellization of a diblock copolymer containing stable nitroxyl radicals

Oxidation-induced micellization was attained for a diblock copolymer containing 2,2,6,6-tetramethylpyperidine-1-oxyl (TEMPO). Poly(4-vinylbenzyloxy-TEMPO)-block-polystyrene (PVTEMPO-b-PSt) showed no self-assembly in carbon tetrachloride, a nonselective solvent. Dynamic light scattering demonstrated that the copolymer self-assembled into micelles of 49.5-nm hydrodynamic diameter when chlorine gas was added to the copolymer solution. The UV and electron spin resonance (ESR) analyses verified that as TEMPO was oxidized into the one-electron oxidant, that is, oxoaminium chloride (OAC) by the chlorine, the nonamphiphilic block copolymer became amphiphilic in nature, and thus, the polymers underwent micellization. An investigation of the relation between the micellization and the oxidation degree of the TEMPO into the OAC revealed that the micellization was induced by only 16% of the OAC. It was confirmed that the POAC-b-PSt micelles were spherical in shape by transmission electron microscopy observation. The micelles served as a two-electron oxidizing agent for benzyl alcohol to quantitatively give benzaldehyde. The micellar structure was maintained after the oxidation of benzyl alcohol without any dissociation into unimers because the OAC was converted into an insoluble hydroxylamine–hydrochloride salt. On the other hand, the micelles reacted with N,N,N′,N′-tetramethyl-1,4-phenylenediamine (TMPD) to produce Wurster’s blue chloride by a one-electron transfer from TMPD to the OAC, converting themselves into PVTEMPO-b-PSt unimers.     

Formation of Core‐Shell‐Corona Micellar Complexes through Adsorption of Double Hydrophilic Diblock Copolymers into Core‐Shell Micelles

Summary: The complexation between polystyrene‐block‐poly(acrylic acid) (PS‐b‐PAA) micelles and poly(ethylene glycol)‐block‐poly(4‐vinyl pyridine) (PEG‐b‐P4VP) is studied, and a facile strategy is proposed to prepare core‐shell‐corona micellar complexes. Micellization of PS‐b‐PAA in ethanol forms spherical core‐shell micelles with PS block as core and PAA block as shell. When PEG‐b‐P4VP is added into the core‐shell micellar solution, the P4VP block is absorbed into the core‐shell micelles to form spherical core‐shell‐corona micellar complexes with the PS block as core, the combined PAA/P4VP blocks as shell and the PEG block as corona. A model is suggested to characterize the core‐shell‐corona micellar complexes.

Schematic formation of core‐shell‐corona (CSC) micellar complexes by adsorption of PEG‐b‐P4VP into core‐shell PS‐b‐PAA micelles.     

Thermodynamic cycle for the calculation of ab initio pKa values for hydroxamic acids

A thermodynamic cycle to calculate pK_a values (Minus log of acid dissociation constants) of hydroxamic acids is presented. Hydroxamic acids exist mainly as amide isomers in the aqueous medium. The amide form of hydroxamic acids has two deprotonation sites and may yield either an N-ion or an O-ion upon deprotonation. The thermodynamic cycle proposed includes the gas-phase N–H deprotonation of the hydroxamic acid, the solvent phase transformation of the N-ion to the O-ion and the solvation of the hydroxamic acid molecule and the O-ion in water. The CBS-QB3 method was employed to obtain gas-phase free energy differences between 12 hydroxamic acids and their respective anions. The aqueous solvation Gibbs free energy changes were calculated at the HF/6-31G(d)/CPCM and HF/6-31+G(d)/CPCM levels of theory using HF/6-31+G(d)/CPCM geometries. For the proton, literature values of the gas-phase free energy of formation and the solvation free energy change were used. The free energy change for the transformation of the N-ion to O-ion in the aqueous medium was calculated by employing CBS-QB3/CPCM in the aqueous medium. For this, the hydroxamic acids were divided in two classes according to the substituent at the carbonyl carbon. A common transformation free energy difference for aliphatic substituted hydroxamic acids and a separate common transformation free energy difference for aromatic substituted hydroxamic acids were obtained. The pK_a calculation yielded a root mean square error of 0.32 pK_a units.     

Photo-induced micellization of poly(4-pyridinemethoxymethylstyrene)-block-polystyrene using a photo-acid generator

The photo-induced micellization was attained for a poly(4-pyridinemethoxymethylstyrene)-block-polystyrene diblock copolymer using diphenyliodonium hexafluorophosphate, a photo-acid generator. Dynamic light scattering demonstrated that the copolymers with a 27.2-nm hydrodynamic diameter self-assembled into micelles with a 68.9-nm diameter by irradiation of a 1,4-dioxane solution of the copolymer using a high-pressure mercury lamp. The micellization was completed within 5 h based on the variation in the scattering intensity and the hydrodynamic diameter of the copolymer. It was found that the copolymer formed monodispersed spherical micelles because G₁(τ), the normalized time correlation function of the scattered field, showed a linear decay. Furthermore, the proton nuclear magnetic resonance analysis confirmed that the micelles had cores formed by the poly(4-pyridinemethoxymethylstyrene) blocks. It was suggested that the micellization occurred by electron transfer from the pyridine to the photo-acid generator in their excited states.     

Influence of β‐Cyclodextrin on the Mixed Micellization Process of Sodium Dodecyl Sulfate and Sodium Lauroyl Sarcosine and Formation of Inclusion Complexes

In this work, we have studied the influence of different concentrations of β‐Cyclodextrin (β‐CD) on the mixed micellization of anionic surfactants sodium dodecyl sulfate (SDS) and sodium lauroyl sarcosine (SLAS) at different SDS mole fractions (α_SDS). From conductivity data, the critical micellar concentration (cmc), the equivalent ionic conductivities of the monomeric species (Λ_m), the associated species (Λ_assc) and the micelle (Λ_mic), the degree of counterion dissociation (α) in the presence of β‐CD were evaluated from the slope of the conductivity versus concentration plots for the pure and binary mixtures. The apparent cmc of the surfactants vary linearly with the β‐CD concentrations. From the dependence of cmc of the surfactants on β‐CD concentration, we have deduced the association constant (K) of surfactant‐β‐CD inclusion complexes assuming 1∶1 stoichiometry. Theories of Clint, Regular solution, and Motomura's have been used for the evaluation of ideality or nonideality of the mixed system. Mixed micelles were found to be rich in SDS content at the cmc in the presence and the absence of β‐CD. The cmc values have been used to evaluate the transfer of standard free energy of micelles (ΔG⁰ _M,tr) from the aqueous medium to additive medium.