Development of a technique based on multi-spectral imaging for monitoring the conservation of cultural heritage objects

A new approach for monitoring the state of conservation of cultural heritage objects surfaces is being developed. The technique utilizes multi-spectral imaging, multivariate analysis and statistical process control theory for the automatic detection of a possible deterioration process, its localization and identification, and the wavelengths most sensitive to detecting this before the human eye can detect the damage or potential degradation changes occur. A series of virtual degradation analyses were performed on images of parchment in order to test the proposed algorithm in controlled conditions. The spectral image of a Dead Sea Scroll (DSS) parchment, IAA (Israel Antiquities Authority) inventory plate # 279, 4Q501 Apocryphal Lamentations B, taken during the 2008 Pilot of the DSS Digitization Project, was chosen for the simulation.     

ATR-FTIR Study of Si(110) Surface Hydrogenated in NH4F-Based Mixtures

RCA (Radio Corporation of America) cleaning has been the important and critical step in semiconductor manufacturing for more than 30 years^[1]. As the electronics devices are shrinking and gate oxide is getting thinner, stringent requirements on metallic impurities,organic contamination and surface roughness on silicon wafer after wet chemical cleaning have attracted more attention in the mechanism of wet etching processes on Si(111) and Si(100) surfaces^[2=11]. In the past few years wet chemical and electrochemical etching of Si(110) in NH₄F solutions has been studied by using scanning tunneling microscopy (STM)^[12] and attenuated total reflection Fourier transform infrared spectroscopy (ATR-FTIR)^[13-14]. In the present work, we extend our study to Si(110) surface in NH₄F/HCl mixtures by using polarized attenuated total reflection FTIR (ATR-FTIR). We have compared the ex-situ ATR-FTIR results on Si(110) in various NH₄F/HCl solutions using Ge prism. Effects of potential on hydrogen-terminated structures on Si(110) surfaces have been investigated by employing in-situ electrochemical ATR-FTIR with double side polished single crystal silicon as a prism. Our ATR-FTIR spectra are correlated with the results obtained with in-situ STM.     

Autoxidation of lipids in parchment

Historic parchment is a macromolecular material, which is complex due to its natural origin, inhomogeneity of the skin structure, unknown environmental history and potential localised degradation. Most research into its stability has so far focussed on thermal and structural methods of analyses.Using gas chromatographic analysis of the atmosphere surrounding parchment during oxidation, we provide the experimental evidence on the production of volatile aldehydes, which can be the products of lipid autoxidation. Oxidation of parchment with different aldehyde emissions was additionally followed in situ using chemiluminometry and the same techniques were used to evaluate the oxidation of differently delipidised parchment. It was shown that the production of peroxides and the emission of aldehydes from the material decrease with lower lipid content. Building on this evidence, we can conclude that the presence of lipids (either initially present in the skin or resulting from conservation intervention) leads to oxidative degradation of collagen and that the non-destructive analysis of the emission of volatiles could be used as a quick tool for evaluation of parchment stability.     

ATR-FTIR Investigation of Hydrogen-terminated Si(111) Surface in Various NH4F-Based Solutions

Wet chemical cleaning of silicon is a critical step in the semiconductor manufacturing. Particles, contaminants, metallic impurities, roughness and native oxide on silicon surface after wet chemical cleaning deteriorate the reliability of transistor performance in integrated circuits^[1]. Wet chemical etching of Si(111) and Si(100) in fluoride and alkaline solutions has been extensively studied in the past few years by using scanning tunneling microscopy (STM) and attenuated total reflection Fourier transform infrared spectroscopy (ATR-FTIR)^[2-11]. In the present work, we extend our study to Si(111) surface after treating with NH₄F/HCl mixtures. STM, X-ray photo spectroscopy (XPS), and ATR-FTIR are used to determine surface roughness, contamination and bond information on Si(111) surface after wet chemical cleaning with various NH₄F/HCl mixtures. The results are discussed in details by comparison to those treated with RCA and HF solutions, indicating that ultra-clean and flat Si(111) surface is obtained by treatment with NH₄F/HCl mixture.     

Vibrational Spectroscopy Study of Selenate and Sulfate Adsorption Mechanisms on Fe and Al (Hydr)oxide Surfaces

The coordination and speciation of selenate (SeO(4)) and sulfate (SO(4)) on goethite and Al oxide were studied using Raman and ATR-FTIR spectroscopy. Raman spectra were collected from pastes of suspensions containing 4 mM SeO(4) or SO(4). For SO(4), complementary data were collected by ATR-FTIR spectroscopy in goethite systems with 1 mM SO(4) and in Al oxide systems with 4 mM SO(4). The combined data set of Raman and ATR-FTIR spectra indicate that both inner- and outer-sphere surface complexes of SeO(4) and SO(4) occur on these metal (hydr)oxide surfaces. These spectral data show that SeO(4) and SO(4) have a similar complexation behavior on the same adsorbent. On goethite, these form predominantly monodentate inner-sphere surface complexes at pH <6, while at pH >6 these anions exist predominantly as outer-sphere surface complexes. On Al oxide, in contrast, these anions exist predominantly as outer-sphere surface complexes, but a small fraction is also present as an inner-sphere complex at pH <6. A comparison of the spectral intensities of these anions on goethite and Al oxide shows that complexation of these anions with Al oxide is weaker than with Fe oxide. Copyright 2000 Academic Press.     

Phenotyping Metastatic Brain Tumors Applying Spectrochemical Analyses: Segregation of Different Cancer Types

Metastatic brain tumors represent a significant proportion of tumors identified intraoperatively. A rapid diagnostic method, circumventing the need for histopathology studies, could prove clinically useful. As many spectroscopic studies have shown ability to differentitate between different tumor types, this technique was evaluated for use within metastatic brain tumors. Spectrochemical approaches [Raman and attenuated total reflection Fourier-transform infrared spectroscopy (ATR-FTIR) spectroscopy] were applied to determine how readily they may identify the primary site for the metastatic tumor. Metastases were from primary adenocarcinomas of lung (n?=?7) and colorectum (n?=?7), and for comparison, metastatic melanoma (n?=?7). The objective was to determine if Raman or ATR-FTIR spectroscopy could delineate the origin of the primary tumor. The results demonstrate that there are marked similarities between the two adenocarcinoma groups and whilst Raman and ATR-FTIR can distinguish the three groups with limited success, classification accuracy is greatly improved when combining the adenocarcinoma groups. The use of such techniques in the clinical setting is more likely to be found intraoperatively, determining the presence of a tumor and suggesting the tumor class; however, traditional histopathology would still be needed to identify the primary origin of the tumor.     

Characterization of genuine and fake artesunate anti-malarial tablets using Fourier transform infrared imaging and spatially offset Raman spectroscopy through blister packs

In support of the efforts to combat the illegal sale and distribution of counterfeit anti-malarial drugs, we evaluated a new analytical approach for the characterization and fast screening of fake and genuine artesunate tablets using a combination of Raman spectroscopy, Spatially Offset Raman Spectroscopy (SORS) and Attenuated Total Reflection-Fourier Transform Infrared (ATR-FTIR) imaging. Vibrational spectroscopy provided chemically specific information on the composition of the tablets; the complementary nature of Raman scattering and FTIR imaging allowed the characterization of both the overall and surface composition of the tablets. The depth-resolving power of the SORS approach provided chemically specific information on the overall composition of the tablets, non-invasively, through a variety of packaging types. Spatial imaging of the tablet surface (using ATR-FTIR) identified the location of domains of excipients and active ingredients with high sensitivity and enhanced spatial resolution. The advantages provided by a combination of SORS and ATR-FTIR imaging in this context confirm its potential for inclusion in the analytical protocol for forensic investigation of counterfeit medicines.     

Preparation and Characterization of Polyhydroxyalkanoates Macroporous Scaffold Through Enzyme-Mediated Modifications

Polyhydroxyalkanoates (PHAs) are hydrophobic biodegradable thermoplastics that have received considerable attention in biomedical applications due to their biocompatibility, mechanical properties, and biodegradability. In this study, the degradation rate was regulated by optimizing the interaction of parameters that influence the enzymatic degradation of P(3HB) film using response surface methodology (RSM). The RSM model was experimentally validated yielding a maximum 21 % weight loss, which represents onefold increment in percentage weight loss in comparison with the conventional method. By using the optimized condition, the enzymatic degradation by an extracellular PHA depolymerase from Acidovorax sp. DP5 was studied at 37 °C and pH 9.0 on different types of PHA films with various monomer compositions. Surface modification of scaffold was employed using enzymatic technique to create highly porous scaffold with a large surface to volume ratio, which makes them attractive as potential tissue scaffold in biomedical field. Scanning electron microscopy revealed that the surface of salt-leached films was more porous compared with the solvent-cast films, and hence, increased the degradation rate of salt-leached films. Apparently, enzymatic degradation behaviors of PHA films were determined by several factors such as monomer composition, crystallinity, molecular weight, porosity, and roughness of the surface. The hydrophilicity and water uptake of degraded salt-leached film of P(3HB-co-70%4HB) were enhanced by incorporating chitosan or alginate. Salt-leached technique followed by partial enzymatic degradation would enhance the cell attachment and suitable for biomedical as a scaffold.     

基于超微电极的原位电化学拉曼光谱

原位电化学拉曼光谱是一种重要的光谱电化学技术.基于超微电极的原位电化学拉曼光谱将拉曼光谱反映的结构信息与电极表面的电化学过程从实验上严格对应和关联,为深刻理解电化学反应机理提供依据.本文综述了采用超微电极作为工作电极的原位电化学拉曼光谱的研究方法和应用进展,总结了应用超微电极作为工作电极开展电化学拉曼光谱实验的方法和具有表面增强拉曼活性的超微电极制备方法,展示了如何利用在超微电极表面获得的拉曼光谱与界面电化学过程的严格关联研究单个锌颗粒电化学氧化过程、吡啶分子在Au电极表面的电化学吸附过程,以及如何利用该技术能以高的信噪比和灵敏度同时测量光电流与分子反应这一特性研究对巯基苯胺选择性光氧化反应.采用超微电极作为工作电极的原位电化学拉曼光谱技术极大拓展了拉曼光谱技术的研究范围,有望成为探索(光)电化学反应的有力工具.     

ATR-FTIR imaging for the analysis of organic materials in paint cross sections: case studies on paint samples from the National Gallery, London

The potential of attenuated total reflection Fourier transform infrared (ATR-FTIR) imaging for the characterisation of the chemical components of paint cross sections from old master paintings was investigated. Three cross sections were chosen to cover a variety of the analytical problems encountered in samples from paintings. The binding medium and degradation products in a green paint sample from a fifteenth-century Florentine painting were imaged, as well as a thin layer within a cross-section from a fifteenth-century German painting, and multiple thin surface coatings on a painting of the 1760s by Peter Romney. The application of chemometric methods for further analysis of the large data set generated for each sample was also explored. The study demonstrated the advantages of ATR-FTIR imaging, which allowed images to be obtained with high spatial resolution (ca. 3-4 microm) without the need to microtome the sample. The gain in sensitivity in detecting trace materials and the information derived from the location of these compounds in the sample was especially valuable, improving interpretation of the FTIR analysis and extending knowledge of the sample composition beyond that obtainable with other analytical techniques.     

Surface-enhanced Raman scattering study of the anthraquinone red pigment carminic acid

FT-Raman and surface-enhanced Raman scattering (SERS) spectroscopy were applied in the vibrational characterization and study of the adsorption and acidity behaviour of the highly fluorescent anthraquinone red pigment carminic acid (CA) on Ag nanoparticles prepared by chemical reduction with citrate and hydroxylamine. The SERS spectra were obtained at several pHs and excitation wavelengths and on Ag nanoparticles prepared by two different methods: chemical reduction with citrate and hydroxylamine in order to find the best experimental conditions for the vibrational study and detection of CA. Three CA forms can be identified on the metal surface, corresponding to the mono-, di- and tri-anionic CA species, whose relative intensity in the SERS spectra can markedly vary depending on the chemical properties of the offered surface and the excitation wavelength. This study could be very helpful for researchers trying to apply surface-enhanced techniques in the detection of small amounts of anthraquinone molecules, both under a cultural heritage and under a biological point of view.     

Portable Raman monitoring of modern cleaning and consolidation operations of artworks on mineral supports

Any restoration performed on cultural heritage artworks must guarantee a low impact on the treated surfaces. Although completely risk-free methods do not exist, the use of tailor-made procedures and the continuous monitoring by portable instrumentation is surely one of the best approaches to conduct a modern restoration process. In this work, a portable Raman monitoring, combined sometimes with spectroscopic techniques providing the elemental composition, is the key analysis technique in the three-step restoration protocol proposed: (a) in situ analysis of the surface to be treated (original composition and degradation products/pollutants) and the cleaning agents used as extractants, (b) the thermodynamic study of the species involved in the treatment in order to design a suitable restoration method and (c) application and monitoring of the treatment. Two cleaning operations based on new technologies were studied and applied to two artworks on mineral supports: a wall painting affected by nitrate impact, and a black crusted stone (chalk) altarpiece. Raman bands of nitrate and gypsum, respectively, decreased after the step-by-step operations in each case, which helped restorers to decide when the treatment was concluded, thus avoiding any further damage to the treated surface of the artworks.     

X-ray Diffraction Mapping for Cultural Heritage Science: a Review of Experimental Configurations and Applications

X-ray diffraction (XRD) mapping consists in the acquisition of XRD patterns at each pixel (or voxel) of an area (or volume). The spatial resolution ranges from the micrometer (μXRD) to the millimeter (MA-XRD) scale, making the technique relevant for tiny samples up to large objects. Although XRD is primarily used for the identification of different materials in (complex) mixtures, additional information regarding the crystallite size, their orientation, and their in-depth distribution can also be obtained. Through mapping, these different types of information can be located on the studied sample/object. Cultural heritage objects are usually highly heterogeneous, and contain both original and later (degradation, conservation) materials. Their structural characterization is required both to determine ancient manufacturing processes and to evaluate their conservation state. Together with other mapping techniques, XRD mapping is increasingly used for these purposes. Here, the authors review applications as well as the various configurations for XRD mapping (synchrotron/laboratory X-ray source, poly-/monochromatic beam, micro/macro beam, 2D/3D, transmission/reflection mode). On-going hardware and software developments will further establish the technique as a key tool in heritage science.     

Raman imaging of PLGA microsphere degradation inside macrophages

Understanding the degradation behavior of polymeric microspheres is crucial for the successful application of such devices in controlled drug delivery. The degradation mechanism of poly(lactic-co-glycolic acid) (PLGA) microspheres inside phagocytic cells is not known, but different models for degradation in aqueous solution have been proposed. We have used confocal Raman spectroscopy and imaging to study the intracellular degradation of PLGA microspheres inside individual macrophages. Our results show that ingested microspheres degrade in a heterogeneous manner, with a more rapid degradation in the center. Comparison of Raman spectra from degrading beads with those of uningested beads reveals that ester hydrolysis occurs throughout the phagocytosed microspheres, with a selective loss of glycolic acid units. Furthermore, we show that PLGA degradation is a cell-mediated process, possibly caused by the low pH of the phagosome and/or the presence of hydrolytic enzymes. In conclusion, we have demonstrated that the chemical composition of degrading polymers inside cells can be probed by Raman spectral imaging. This technique will expand the capabilities of investigating biomaterial degradation in vivo.     

Application of vibrational spectroscopy techniques for material identification from fire debris

The primary goal of this research is to demonstrate the use of vibrational spectroscopy techniques as a tool for the identification of materials post fire. This paper discusses the use micro-Raman spectroscopy and ATR-FTIR to identify materials found in fire debris. The polymeric materials under study were high density and low density polyethylene (HDPE and LDPE), polyvinyl chloride (PVC), polymethyl methacrylate (PMMA) and cotton. These are commonly materials found in households around the world, their identification from the debris provides useful forensic information on the spatial distribution of fuels in a fire compartment, thus allowing for accurate analysis and modelling. Earlier work has established Raman spectroscopy to be a very good tool for material identification post fire. The addition of ATR-FTIR spectroscopy as a technique in developing this novel tool for identification of materials post fire has established vibrational spectroscopy in the area of fire investigation. This study indicated that the limitations associated with Raman spectroscopy in post fire identification, could be made insignificant by the strengths of ATR-FTIR spectroscopy and vice versa. To further establish the validity of this identification process principal component analysis was used to discriminate between the spectrum of the burnt materials and an error analysis computed. Both techniques demonstrated that identification could be done with very minimal confusion between the materials studied.     

Dynamic mechanical analysis (DMA), 13c solid state nmr and micro-thermomechanical studies of historical parchment

DMA and solid state ¹³C NMR techniques were used to measure historical parchment samples within the framework of the project (MAP) Micro Analysis of Parchment (EC contract No. SMT4-96-2101) in collaboration with the School of Conservation in Copenhagen. DMA was used in both thermal scan and creep modes. Thermal scans provided information on the transitions associated with the collagen polymer. Microthermal analysis was also used to obtain information on the topography and thermal conductivity of sample areas of 100 μm. Localised heating enabled measurements of softening transitions in the sample. This behaviour is influenced by the chemical composition of parchment. 13C NMR provided information on the carbon atoms associated with the polypeptide chains of the collagen in parchment. The behaviour of samples immersed in water and measured in DMA creep mode was used to measure the shrinkage behaviour of the parchment samples. The different but complementary techniques provided a means for characterising the physicochemical state of parchment samples. This revised version was published online in July 2006 with corrections to the Cover Date.     

Effect of nitrate, perchlorate, and water on uranyl(VI) speciation in a room-temperature ionic liquid: a spectroscopic investigation

Room-temperature ionic liquids form potentially important solvents in novel nuclear waste reprocessing methods, and the solvation, speciation, and complexation behaviors of lanthanides and actinides in these solvents are of great current interest. In the study reported here, the coordination environment of uranyl(VI) in solutions of the room-temperature ionic liquid 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide ([EMIM][Tf(2)N]) containing perchlorate, tetrabutylammonium nitrate, and water was investigated using Raman, ATR-FTIR, and NMR spectroscopies in order to better understand the role played in uranyl(VI) solution chemistry in room-temperature ionic liquids by water and other small, weakly complexing ligands. The (2)H NMR chemical shift for water in a solution of uranyl perchlorate hexahydrate in [EMIM][Tf(2)N] appears at 6.52 ppm, indicating that water is coordinated to uranyl(VI). A broad ν(OH) stretching mode at 3370 cm(-1) in the ATR-FTIR spectrum shows that this coordinated water is engaged in hydrogen bonding with water molecules in a second coordination sphere. A significant upfield shift in the (2)H NMR signal for water and the appearance of distinct ν(as)(HOH) (at 3630 cm(-1)) and ν(s)(HOH) (at 3560 cm(-1)) vibrational bands in the ATR-FTIR spectra show that coordinated water is displaced by nitrate upon formation of the UO(2)(NO(3))(2) and UO(2)(NO(3))(3)(-) complexes. The Raman spectra indicate that perchlorate complexed to uranyl(VI) is also displaced by nitrate. Our results indicate that perchlorate and water, though weakly complexing ligands, do have a role in uranyl(VI) speciation in room-temperature ionic liquids and that Raman, infrared, and NMR spectroscopies are valuable additions to the suite of tools currently used to study the chemical behavior of uranyl(VI)-ligand complexes in these solvents.