Polyoxomolybdodiphosphonates: examples incorporating ethylidenepyridines

We have synthesized and structurally characterized three pyridylethylidene-functionalized diphosphonate-containing polyoxomolybdates, [{Mo(VI)O(3)}(2){Mo(V)(2)O(4)}{HO(3)PC(O)(CH(2)-3-C(5)NH(4))PO(3)}(2)](6-) (1), [{Mo(VI)(2)O(6)}(2){Mo(V)(2)O(4)}{O(3)PC(O)(CH(2)-3-C(5)NH(4))PO(3)}(2)](8-) (2), and [{Mo(V)(2)O(4)(H(2)O)}(4){O(3)PC(O)(CH(2)-3-C(5)NH(4))PO(3)}(4)](12-) (3). Polyanions 1-3 were prepared in a one-pot reaction of the dinuclear, dicationic {Mo(V)(2)O(4)(H(2)O)(6)}(2+) with 1-hydroxo-2-(3-pyridyl)ethylidenediphosphonate (Risedronic acid) in aqueous solution. Polyanions 1 and 2 are mixed-valent Mo(VI/V) species with open tetranuclear and hexanuclear structures, respectively, containing two diphosphonate groups. Polyanion 3 is a cyclic octanuclear structure based on four {Mo(V)(2)O(4)(H(2)O)} units and four diphosphonates. Polyanions 1 and 2 crystallized as guanidinium salts [C(NH(2))(3)](5)H[{Mo(VI)O(3)}(2){Mo(V)(2)O(4)}{HO(3)PC(O)(CH(2)-3-C(5)NH(4))PO(3)}(2)]·13H(2)O (1a) and [C(NH(2))(3)](6)H(2)[{Mo(VI)(2)O(6)}(2){Mo(V)(2)O(4)}{O(3)PC(O)(CH(2)-3-C(5)NH(4))PO(3)}(2)]·10H(2)O (2a), whereas polyanion 3 crystallized as a mixed sodium-guanidinium salt, Na(8)[C(NH(2))(3)](4)[{Mo(V)(2)O(4)(H(2)O)}(4){O(3)PC(O)(CH(2)-3-C(5)NH(4))PO(3)}(4)]·8H(2)O (3a). The compounds were characterized in the solid state by single-crystal X-ray diffraction, IR spectroscopy, and thermogravimetric and elemental analyses. The formation of polyanions 1 and 3 is very sensitive to the pH value of the reaction solution, with exclusive formation of 1 above pH 7.4 and 3 below pH 6.6. Detailed solution studies by multinuclear NMR spectrometry were performed to study the equilibrium between these two compounds. Polyanion 2 was insoluble in all common solvents. Detailed computational studies on the solution phases of 1 and 3 indicated the stability of these polyanions in solution, in complete agreement with the experimental findings.     

New insights into the polymerization of methyl methacrylate initiated by rare-earth borohydride complexes: a combined experimental and computational approach

Polymerization of methyl methacrylate (MMA) initiated by the rare-earth borohydride complexes [Ln(BH(4))(3)(thf)(3)] (Ln=Nd, Sm) or [Sm(BH(4))(Cp*)(2)(thf)] (Cp*=eta-C(5)Me(5)) proceeds at ambient temperature to give rather syndiotactic poly(methyl methacrylate) (PMMA) with molar masses M(n) higher than expected and quite broad molar mass distributions, which is consistent with a poor initiation efficiency. The polymerization of MMA was investigated by performing density functional theory (DFT) calculations on an eta-C(5)H(5) model metallocene and showed that in the reaction of [Eu(BH(4))(Cp)(2)] with MMA the borate [Eu(Cp)(2){(OBH(3))(OMe)C=C(Me)(2)}] (e-2) complex, which forms via the enolate [Eu(Cp)(2){O(OMe)C=C(Me)(2)}] (e), is calculated to be exergonic and is the most likely of all of the possible products. This product is favored because the reaction that leads to the formation of carboxylate [Eu(Cp)(2){OOC-C(Me)(=CH(2))}] (f) is thermodynamically favorable, but kinetically disfavored, and both of the potential products from a Markovnikov [Eu(Cp)(2){O(OMe)C-CH(Me)(CH(2)BH(3))}] (g) or anti-Markovnikov [Eu(Cp)(2){O(OMe)C-C(Me(2))(BH(3))}] (h) hydroboration reaction are also kinetically inaccessible. Similar computational results were obtained for the reaction of [Eu(BH(4))(3)] and MMA with all of the products showing extra stabilization. The DFT calculations performed by using [Eu(Cp)(2)(H)] to model the mechanism previously reported for the polymerization of MMA initiated by [Sm(Cp*)(2)(H)](2) confirmed the favorable exergonic formation of the intermediate [Eu(Cp)(2){O(OMe)C=C(Me)(2)}] (e') as the kinetic product, this enolate species ultimately leads to the formation of PMMA as experimentally observed. Replacing H by BH(4) thus prevents the 1,4-addition of the [Eu(BH(4))(Cp)(2)] borohydride ligand to the first incoming MMA molecule and instead favors the formation of the borate complex e-2. This intermediate is the somewhat active species in the polymerization of MMA initiated by the borohydride precursors [Ln(BH(4))(3)(thf)(3)] or [Sm(BH(4))(Cp*)(2)(thf)].     

Binuclear half-sandwich cobalt(III) and rhodium(III) ortho-carboranedichalocogenolato complexes with ether chain-bridged bis(cyclopentadienyl) ligand

1, 1'-(3-Oxapentamethylene)dicyclopentadiene [O(CH(2)CH(2)C(5)H(5))(2)], containing a flexible chain-bridged group, was synthesized by the reaction of sodium cyclopentadienide with bis(2-chloroethyl) ether through a slightly modified literature procedure. Furthermore, the binuclear cobalt(III) complex O[CH(2)CH(2)(eta(5)-C(5)H(4))Co(CO)I(2)](2) and insoluble polynuclear rhodium(III) complex {O[CH(2)CH(2)(eta(5)-C(5)H(4))RhI(2)](2)}(n) were obtained from reactions of with the corresponding metal fragments and they react easily with PPh(3) to give binuclear metal complexes, O[CH(2)CH(2)(eta(5)-C(5)H(4))Co(PPh(3))I(2)](2) and O[CH(2)CH(2)(eta(5)-C(5)H(4))Rh(PPh(3))I(2)](2), respectively. Complexes react with bidentate dilithium dichalcogenolato ortho-carborane to give eight binuclear half-sandwich ortho-carboranedichalcogenolato cobalt(III) and rhodium(III) complexes O[CH(2)CH(2)(eta(5)-C(5)H(4))Co(PPh(3))(E(2)C(2)B(10)H(10))](2) (E = S and Se), O[CH(2)CH(2)(eta(5)-C(5)H(4))](2)Co(2)(E(2)C(2)B(10)H(10)) (E = S and Se), O[CH(2)CH(2)(eta(5)-C(5)H(4))Co(E(2)C(2)B(10)H(10))](2) (E = S and Se and O[CH(2)CH(2)(eta(5)-C(5)H(4))Rh(PPh(3))(E(2)C(2)B(10)H(10))](2) (E = S and Se). All complexes have been characterized by elemental analyses, NMR spectra ((1)H, (13)C, (31)P and (11)B NMR) and IR spectroscopy. The molecular structures were determined by X-ray diffractometry.     

Hybrid dibismuthines and distibines as ligands towards transition metal carbonyls

The hybrid dibismuthines O(CH(2)CH(2)BiPh(2))(2) and MeN(CH(2)-2-C(6)H(4)BiPh(2))(2) react with [M(CO)(5)(thf)] (M = Cr or W) to form [{M(CO)(5)}(2){O(CH(2)CH(2)BiPh(2))(2)}] and [{Cr(CO)(5)}(2){MeN(CH(2)-2-C(6)H(4)BiPh(2))(2)}] containing bridging bidentate (Bi(2)) coordination. The unsymmetrical tertiary bismuthine complexes [M(CO)(5){BiPh(2)(o-C(6)H(4)OMe)}] are also described. Depending upon the molar ratio, the hybrid distibines O(CH(2)CH(2)SbMe(2))(2) and MeN(CH(2)-2-C(6)H(4)SbMe(2))(2) react with [M(CO)(5)(thf)] to give the pentacarbonyl complexes [{M(CO)(5)}(2){O(CH(2)CH(2)SbMe(2))(2)}] and [{Cr(CO)(5)}(2){MeN(CH(2)-2-C(6)H(4)SbMe(2))(2)}] or tetracarbonyls cis-[M(CO)(4){O(CH(2)CH(2)SbMe(2))(2)}] and cis-[M(CO)(4){MeN(CH(2)-2-C(6)H(4)SbMe(2))(2)}]. The latter can also be obtained from [Cr(CO)(4)(nbd)] or [W(CO)(4)(pip)(2)], and contain chelating bidentates (Sb(2)-coordinated) as determined crystallographically. S(CH(2)-2-C(6)H(4)SbMe(2))(2) coordinates as a tridentate (SSb(2)) in fac-[M(CO)(3){S(CH(2)-2-C(6)H(4)SbMe(2))(2)}] (M = Cr or Mo) and fac-[Mn(CO)(3){S(CH(2)-2-C(6)H(4)SbMe(2))(2)}][CF(3)SO(3)]. Fac-[Mn(CO)(3){MeN(CH(2)-2-C(6)H(4)SbMe(2))(2)}][CF(3)SO(3)] contains NSb(2)-coordinated ligand in the solid state, but in solution a second species, Sb(2)-coordinated and with a κ(1)-CF(3)SO(3) replacing the coordinated amine is also evident. X-ray crystal structures were also determined for fac-[Cr(CO)(3){S(CH(2)-2-C(6)H(4)SbMe(2))(2)}], fac-[Mn(CO)(3){S(CH(2)-2-C(6)H(4)SbMe(2))(2)}][CF(3)SO(3)] and fac-[Mn(CO)(3){MeN(CH(2)-2-C(6)H(4)SbMe(2))(2)}] [CF(3)SO(3)]. Hypervalent N···Sb interactions are present in cis-[M(CO)(4){MeN(CH(2)-2-C(6)H(4)SbMe(2))(2)}] (M = Mo or W), but absent for M = Cr.     

Phase behaviour and conductivity study of electrolytes in supercritical hydrofluorocarbons

The purpose of this work was to characterise supercritical hydrofluorocarbons (HFC) that can be used as solvents for electrodeposition. The phase behaviour of CHF(3), CH(2)F(2), and CH(2)FCF(3) containing [NBu(n)(4)][BF(4)], [NBu(n)(4)][B{3,5-C(6)H(3)(CF(3))(2)}(4)] and Na[B{3,5-C(6)H(3)(CF(3))(2)}(4)] was studied and the conditions for forming a single supercritical phase established. Although all three HFCs are good solvents for [NBu(n)(4)][BF(4)] the results show that the CH(2)F(2) system has the lowest p(r) for dissolving a given amount of [NBu(n)(4)][BF(4)]. The solubility of Na[B{3,5-C(6)H(3)(CF(3))(2)}(4)] in CH(2)F(2) was found to be unexpectedly high. Studies of the phase behaviour of CH(2)F(2) containing [NBu(n)(4)][BF(4)] and [Cu(CH(3)CN)(4)][BF(4)] showed that the copper complex was unstable in the absence of CH(3)CN. For CHF(3), [Cu(hfac)(2)] was more soluble and more stable than [Cu(CH(3)CN)(4)][BF(4)] and only increased the phase-separation pressure by a moderate amount. Studies of the conductivity of [NBu(n)(4)][B(C(6)F(5))(4)], [NBu(n)(4)][B{3,5-C(6)H(3)(CF(3))(2)}(4)], [NR(f)Bu(n)(3)][B{3,5-C(6)H(3)(CF(3))(2)}(4)] (R(f) = (CH(2))(3)C(7)F(15)), and Na[B{3,5-C(6)H(3)(CF(3))(2)}(4)] were carried out in scCH(2)F(2). The results show that these salts are more conducting than [NBu(n)(4)][BF(4)] under the same conditions although the increase is much less significant than that reported in previous work in supercritical CO(2) + CH(3)CN. Consequently, either [NBu(n)(4)][BF(4)] or the corresponding BARF salts would be suitable background electrolytes for electrodeposition from scCH(2)F(2).     

Unprecedented polymerization of epsilon-Caprolactone initiated by a single-site lanthanide borohydride complex, [Sm(eta-C5Me5)2(BH4)(thf)]: mechanistic insights

The monoborohydride lanthanide complex [Sm(Cp*)2(BH4)(thf)] (1a) (Cp* = eta-C5Me5), has been successfully used for the controlled ring-opening polymerization of epsilon-caprolactone (epsilon-CL). The organometallic samarium(III) initiator 1 a produces, in quantitative yields, alpha,omega-dihydroxytelechelic poly(epsilon-caprolactone) displaying relatively narrow polydispersity indices (<1.3) within a short period of time (30 min). The polymers have been characterized by 1H and 13C NMR, SEC, and MALDI-TOF MS analyses. Use of the single-site initiator 1 a allows a better understanding of the polymerization mechanism, in particular with the identification of the intermediate compound [Sm(Cp*)2(BH4)(epsilon-CL)] (1b). Indeed, one molecule of epsilon-CL initially displaces the coordinated THF in 1 a to give 1 b. Then, epsilon-CL opening (through cleavage of the cyclic ester oxygen-acyl bond) and insertion into the Sm--HBH3 bond followed by reduction of the carbonyl function by the BH3 end-group ligand, leads to the samarium alkoxyborane derivative [Sm(Cp*)2[O(CH2)6O(BH2)]] (2). This compound subsequently initiates the polymerization of epsilon-CL through a coordination-insertion mechanism. Finally, upon hydrolysis, alpha,omega-dihydroxypoly(epsilon-caprolactone), HO(CH2)5C(O)[O(CH2)5C(O)]nO(CH2)6OH (4) is recovered. The stereoelectronic contribution of the two Cp* ligands appears to slow down the polymerization and to limit transesterification reactions.     

Solution studies of dinuclear polyamine-linked platinum-based antitumour complexes

The aquation profiles of two novel dinuclear polyamine-linked, platinum-based antitumour complexes [{trans-PtCl((15)NH(3))(2)}(2){μ-((15)NH(2)(CH(2))(6)(15)NH(2)(CH(2))(6)(15)NH(2))}](3+) (BBR3007, 1,1/t,t-6,6, 1) and [{trans-PtCl((15)NH(3))(2)}(2){μ-((15)NH(2)(CH(2))(6)(15)NH(2)(CH(2))(2)(15)NH(2)(CH(2))(6)(15)NH(2))}](4+) (BBR3610, 1,1/t,t-6,2,6, 1') have been probed using 2D [(1)H, (15)N] HSQC NMR spectroscopy. Reported herein are the rate constants for the hydrolysis of 1 and 1', as well as the acid dissociation constants of the coordinated aqua ligands in their aquated derivatives. The aquation and anation rate constants for the single step aquation model in 15 mM NaClO(4) (pH 5.4) at 298 K are, for 1, k(1) = 7.2 ± 0.1 ×10(-5) s(-1), k(-1) = 0.096 ± 0.002 M(-1) s(-1) and, for 1', k(1) = 4.0 ± 0.2 × 10(-5) s(-1), k(-1) = 1.4 ± 0.1 M(-1) s(-1). The effect of the linker backbone (Pt(tetra(m)mine vs. polyamine) was evaluated by comparison with previous data for the trinuclear complex [{trans-PtCl(NH(3))(2)}(2)(μ-trans-Pt(NH(3))(2){NH(2)(CH(2))(6)NH(2)}(2))](4+) (1,0,1/t,t,t or BBR3464). The pK(1) for 1,0,1/t,t,t (3.44) is closest to that of 1 (3.12), while the pronounced difference for 1' (4.54), means that 1' is the least aquated of the three complexes at equilibrium. pK(a) values of 5.92 were calculated for the aquated forms of both 1 and 1', which are 0.3 pK units higher than for either 1,0,1/t,t,t, or the dinuclear 1,1/t,t. The higher pK(a) values for both polyamine-linked compounds may be attributed to the formation of macrochelates between the central NH(2) groups and the {PtN(3)O} coordination sphere of the aquated species.     

Substitution and derivatization reactions of a water soluble iron(II) complex containing a self-assembled tetradentate phosphine ligand

Facile substitution reactions of the two water ligands in the hydrophilic tetradentate phosphine complex cis-[Fe{(HOCH2)P{CH2N(CH2P(CH2OH)2)CH2}2P(CH2OH)}(H2O)2](SO4) (abbreviated to [Fe(L1)(H2O)2](SO4), 1) take place upon addition of Cl-, NCS-, N3(-), CO3(2-) and CO to give [Fe(L1)X2] (2, X = Cl; 4, X = NCS; 5, X=N3), [Fe(L1)(kappa2-O(2)CO)], 6 and [Fe(L1)(CO)2](SO4), 7. The unsymmetrical mono-substituted intermediates [Fe(L1)(H2O)(CO)](SO(4)) and [Fe(L(1))(CO)(kappa(1)-OSO(3))] (8/9) have been identified spectroscopically en-route to 7. Treatment of 1 with acetic anhydride affords the acylated derivative [Fe{(AcOCH2)P{CH2N(CH2P(CH2OAc)2)CH2}2P(CH2OAc)}(kappa2-O(2)SO2)] (abbreviated to [Fe(L2)(kappa2-O(2)SO2)], 10), which has increased solubility over 1 in both organic solvents and water. Treatment of 1 with glycine does not lead to functionalisation of L1, but substitution of the aqua ligands occurs to form [Fe(L(1))(NH(2)CH(2)CO(2)-kappa(2)N,O)](HSO(4)), 11. Compound 10 reacts with chloride to form [Fe(L(2))Cl(2)] 12, and 12 reacts with CO in the presence of NaBPh4 to form [Fe(L2)Cl(CO)](BPh4) 13b. Both of the chlorides in 12 are substituted on reaction with NCS- and N3(-) to form [Fe(L2)(NCS)2] 14 and [Fe(L2)(N3)2] 15, respectively. Complexes 2.H2O, 4.2H2O, 5.0.812H2O, 6.1.7H2O, 7.H2O, 10.1.3CH3C(O)CH3, 12 and 15.0.5H2O have all been crystallographically characterised.     

Dinuclear palladium(ii) complexes with bridging amidate ligands

New homonuclear dimeric Pd(ii) complexes have been synthesized by the reaction of Pd(en)(2+) or Pd(bipy)(2+) (where en = ethylenediamine and bipy = 2,2'-bipyridine) units with acetamide or by the Pd(ii) mediated hydrolysis of CH(3)CN. In these dimers the two metal centers are bridged by either two amidates or by the combination of one hydroxo group and one amidate ligand. The crystal structures of complexes {[Pd(bipy)](2)(micro-1,3-CH(3)CONH)(2)}(NO(3))(2).H(2)O.1/2(CH(3))(2)CO.1/2CH(3)CN () and {[Pd(bipy)](2)(micro-1,3-CH(3)CONH)(2)}(OTf)(2) () showed intrametallic Pd-Pd distances of 2.8480(8) A () and 2.8384(7) A (), respectively, in accordance with the accepted values for a strong Pd-Pd interaction. The presence of pi[dot dot dot]pi interactions between the bipyridine ligands on the di-micro-amidate complexes of Pd(bipy)(2+) shortens the distance between the two Pd centers and allows the formation of the metal-metal interaction. By contrast, the crystal structure of complex {[Pd(en)](2)(micro-1,3-CH(3)CONH)(2)}(OTf)(2).H(2)O (), (where OTf = triflate) where there is no pi[dot dot dot]pi interaction between the ligands on the metal centers, is also reported, and no Pd-Pd interaction is observed. Additionally, one of the complexes, {[Pd(en)](2)(micro-OH)(micro-CH(3)CONH)}(NO(3))(2) (), presents an interesting hydrogen bonded 3-D network formed by nitrate ions and water molecules. All complexes have been characterized by infrared and (1)H NMR spectroscopy.     

Synthesis, crystal structure and optical properties of [Ag(UO2)3(OAc)9][Zn(H2O)4(CH3CH2OH)2]: a novel compound containing closed-shell 3d10, 4d10 and 5d10 metal ions

[Ag(UO(2))(3) (OAc)(9)][Zn(H(2)O)(4)(CH(3)CH(2)OH)(2)] (, OAc = CH(3)COO(-)) crystallized from an ethanol solution and its structure was determined by IR spectroscopy, elemental analysis, (1)H NMR, (13)C NMR and X-ray crystallography; it is composed of [Zn(H(2)O)(4)(CH(3)CH(2)OH)(2)](2+) cations and [Ag(UO(2))(3)(OAc)(9)](2-) anions in which triuranyl [(UO(2))(OAc)(3)](3) clusters are linked by the Ag ion.     

Structural complexity of the magnesiation of furan: an octadecanuclear product with a subporphyrin-like Mg3(2,5-fur-di-yl)3 substructure

Subjecting furan to sodium-mediated magnesiation via the new heteroleptic alkyl-amido reagent [(TMEDA).Na(CH(2)SiMe(3))(TMP)Mg(TMP)] produces the remarkable dodecasodium-hexamagnesium molecule [{(TMEDA)(3)Na(6)Mg(3)(CH(2)SiMe(3))(2,5-C(4)H(2)O)(3)(2-C(4)H(3)O)(5)}(2)], built upon a bridge network of 10 monodeprotonated and 6 twofold-deprotonated furan ligands.     

Polymer imprinting with iron-oxo-hydroxo clusters: [Fe6O2(OH)2(O2CC(Cl)=CH2)12(H2O)2], [Fe6O2(OH)2(O2C-Ph-(CH)=CH2)12(H2O)2] and [{Fe(O2CC(Cl)=CH2)(OMe)2}10

We report the syntheses of imprinted polymers using iron-oxo-hydroxo clusters as templates. Three new iron clusters, [Fe(6)O(2)(OH)(2)(O(2)CC(Cl)=CH(2))(12)(H(2)O)(2)] (1), [{Fe(O(2)CC(Cl)=CH(2))(OMe)(2)}(10)] (2) and [Fe(6)O(2)(OH)(2)(O(2)C-Ph-(CH)=CH(2))(12)(H(2)O)(2)] (3) have been prepared from commercially-available carboxylic acids. Cluster-imprinted-polymers (CIPs) of 1, 2 and 3 were prepared with ethylene glycol dimethacrylate monomer, and of 1 with methyl methacrylate monomer. The imprinted sites within the CIPs were examined using EXAFS and diffuse reflectance UV/vis spectroscopy, demonstrating that the clusters 1, 2 and 3 were incorporated intact within the polymers. Extraction of the clusters from the CIPs imprinted with 1 and 3 gave new polymers that showed evidence of an imprinting effect.     

Novel micro3-oxo complexes prepared from Cp*Zr(B(3R)3 (R = H, CH3) and B(C6F5)3 in diethyl ether

From the reactions of Cp*ZrCl(3) with 3 equiv. of LiBH(3)R (R = CH(3), Ph), the organotrihydroborate complexes, Cp*Zr(BH(3)CH(3))(3), 1, and Cp*Zr(BH(3)Ph)(3), 2, were isolated. One of the Zr-H-B bonding interactions in 2 could be described as an intermediate case between the bidentate and tridentate modes. Reactions of and Cp*Zr(BH(4))(3), 3, with Lewis acid B(C(6)F(5))(3) in diethyl ether produced the novel 14-electron ionic compounds [(micro(3)-O)(micro(2)-OC(2)H(5))(3){(Cp*Zr(OC(2)H(5)))(2)(BCH(3))}][HB(C(6)F(5))(3)], 4, and [(micro(3)-O)(micro(2)-OC(2)H(5))(3){(Cp*Zr(OC(2)H(5)))(2)(BOC(2)H(5))}][HB(C(6)F(5))(3)], 5, respectively. These two unique compounds resulted from a sequential cleavage of Zr-H-B bonds of 1 and 3 and C-O bonds of ether followed by the formation of O-B bonds. The solid state single crystal X-ray analyses revealed that both compounds have similar structures. A micro(3)-oxygen bridges two zirconiums and a boron atom. The latter three atoms are further connected by three micro(2)-bridging ethoxy groups giving rise to three four-membered metallacycles within the structure of each cation.     

On the nature of actinide- and lanthanide-metal bonds in heterobimetallic compounds

Eleven experimentally characterized complexes containing heterobimetallic bonds between elements of the f-block and other elements were examined by quantum chemical methods: [(η(5)-C(5)H(5))(2)(THF)LuRu(η(5)-C(5)H(5))(CO)(2)], [(η(5)-C(5)Me(5))(2)(I)ThRu(η(5)-C(5)H(5))(CO)(2)], [(η(5)-C(5)H(5))(2)YRe(η(5)-C(5)H(5))(2)], [{N(CH(2)CH(2)NSiMe(3))(3)}URe(η(5)-C(5)H(5))(2)], [Y{Ga(NArCh)(2)}{C(PPh(2)NSiH(3))(2)}(CH(3)OCH(3))(2)], [{N(CH(2)CH(2)NSiMe(3))(3)}U{Ga(NArCH)(2)}(THF)], [(η(5)-C(5)H(5))(3)UGa(η(5)-C(5)Me(5))], [Yb(η(5)-C(5)H(5)){Si(SiMe(3))(3)(THF)(2)}], [(η(5)-C(5)H(5))(3)U(SnPh(3))], [(η(5)-C(5)H(5))(3)U(SiPh(3))], and (Ph[Me]N)(3)USi(SiMe(3))(3). Geometries in good agreement with experiment were obtained at the density functional level of theory. The multiconfigurational complete active space self-consistent field method (CASSCF) and subsequent corrections with second order perturbation theory (CASPT2) were applied to further understand the electronic structure of the lanthanide/actinide-metal (or metal-metalloid) bonds. Fragment calculations and energy-decomposition analyses were also performed and indicate that charge transfer occurs from one supported metal fragment to the other, while the bonding itself is always dominated by ionic character.     

Hydrocarbon-soluble calcium hydride: a "worker-bee" in calcium chemistry

The reactivity of the hydrocarbon-soluble calcium hydride complex [{CaH(dipp-nacnac)(thf)}(2)] (1; dipp-nacnac=CH{(CMe)(2,6-iPr(2)C(6)H(3)N)}(2)) with a large variety of substrates has been investigated. Addition of 1 to C=O and C=N functionalities gave easy access to calcium alkoxide and amide complexes. Similarly, reduction of the C[triple chemical bond]N bond in a cyanide or an isocyanide resulted in the first calcium aldimide complexes [Ca{N=C(H)R}(dipp-nacnac)] and [Ca{C(H)=NR}(dipp-nacnac)], respectively. Complexation of 1 with borane or alane Lewis acids gave the borates and alanates as contact ion pairs. In reaction with epoxides, nucleophilic ring-opening is observed as the major reaction. The high reactivity of hydrocarbon-soluble 1 with most functional groups contrasts strongly with that of insoluble CaH(2), which is essentially inert and is used as a common drying agent. Crystal structures of the following products are presented: [{Ca{OC(H)Ph(2)}(dipp-nacnac)}(2)], [{Ca{N=C(H)Ph}(dipp-nacnac)}(2)], [{Ca{C(H)=NC(Me)(2)CH(2)C(Me)(3)}(dipp-nacnac)}(2)], [{Ca{C(H)=NCy}(dipp-nacnac)}(2)], [Ca(dipp-nacnac)(thf)](+)[H(2)BC(8)H(14)](-) and [{Ca(OCy)(dipp-nacnac)}(2)]. The generally smooth and clean conversions of 1 with a variety of substrates and the stability of most intermediates against ligand exchange make 1 a valuable key precursor in the syntheses of a wide variety of beta-diketiminate calcium complexes.     

Synthesis with structural and electronic characterization of homoleptic Fe(II)- and Fe(III)-fluorinated phenolate complexes

Four Fe(III) compounds and one Fe(II) compound containing mononuclear, homoleptic, fluorinated phenolate anions of the form [Fe(OAr)(m)](n-) have been prepared in which Ar(F) = C(6)F(5) and Ar' = 3,5-C(6)(CF(3))(2)H(3): (Ph(4)P)(2)[Fe(OAr(F))(5)], 1, (Me(4)N)(2)[Fe(OAr(F))(5)], 2, {K(18-crown-6)}(2)[Fe(OAr(F))(5)], 3a, {K(18-crown-6)}(2)[Fe(OAr')(5)], 3b, and {K(18-crown-6)}(2)[Fe(OAr(F))(4)], 6. Two dinuclear Fe(III) compounds have also been prepared: {K(18-crown-6)}(2)[(OAr(F))(3)Fe(μ(2)-O)Fe(OAr(F))(3)], 4, and {K(18-crown-6)}(2)[(OAr(F))(3)Fe(μ(2)-OAr(F))(2)Fe(OAr(F))(3)], 5. These compounds have been characterized with UV-vis spectroscopy, elemental analysis, Evans method susceptibility, and X-ray crystallography. All-electron, geometry-optimized DFT calculations on four [Ti(IV)(OAr)(4)] and four [Fe(III)(OAr)(4)](-) species (Ar = 2,3,5,6-C(6)Me(4)H, C(6)H(5), 2,4,6-C(6)Cl(3)H(2), C(6)F(5)) with GGA-BP and hybrid B3LYP basis sets demonstrated that, under D(2d) symmetry, π donation from the O 2p orbitals is primarily into the d(xy) and d(z(2)) orbitals. The degree of donation is qualitatively consistent with expectations based on ligand Br?nsted basicity and supports the contention that fluorinated phenolate ligands facilitate isolation of nonbridged homoleptic complexes due to their reduced π basicity at oxygen.     

Palladacycles bearing tridentate CNS-type benzamidinate ligands as catalysts for cross-coupling reactions

Three pendant benzamidines, [Ph-C(=NC(6)H(5))-{NH(E)}] [E = -(CH(2))(2)SMe (1); -(CH(2))(2)S(t)Bu (2); -o-C(6)H(4)SMe (3)], are described. Reactions of 1, 2 or 3 with one molar equivalent of Pd(OAc)(2) in CH(2)Cl(2) give the palladacyclic complexes, [Ph-C{-NH(η(1)-C(6)H(4))}{=N(E)}]Pd(OAc) [E = -(CH(2))(2)SMe (4); -(CH(2))(2)S(t)Bu (5); -o-C(6)H(4)SMe (6)], as mononuclear palladium complexes respectively. A minor product described as 5', {[Ph-C{-N(C(6)H(5))}{-N(CH(2))(2)S(t)Bu}]Pd(OAc)}(2), was isolated as benzamidinate-bridged dinuclear palladium complex upon recrystallizing from Et(2)O/hexane solution. Treatment of 1, 2 or 3 with one molar equivalent of PdCl(2) in the presence of NEt(3) in CH(2)Cl(2) gives the palladacyclic complexes, [Ph-C{-NH(η(1)-C(6)H(4))}{=N(E)}]PdCl [E = -(CH(2))(2)SMe (7); -(CH(2))(2)S(t)Bu (8); -o-C(6)H(4)SMe (9)], as mononuclear palladium complexes respectively. The crystal and molecular structures are reported for compounds 5, 5' and 6-8. The application of these palladacyclic complexes to the Suzuki and Heck coupling reactions was examined.     

Osmium-mediated C--H and C--C bond cleavage of a phenolic substrate: p-quinone methide and methylene arenium pincer complexes

The diphosphine 2,4,6-(CH(3))(3)-3,5-(iPr(2)PCH(2))(2)C(6)OH (1) reacts with [OsCl(2)(PPh(3))(3)] in presence of an excess of triethylamine to yield the isomeric para-quinone methide derivatives [Os{4-(CH(2))-1-(O)-2,6-(CH(3))(2)-3,5-(iPr(2)PCH(2))(2)C(6)}(Cl)(H)(PPh(3))] (2 and 3), which differ in the positions of the mutually trans hydride and chloride ligands. Complex 2 reacts with CO to afford the dicarbonyl species [Os{1-(O)-2,4,6-(CH(3))(3)-3,5-(iPr(2)PCH(2))(2)C(6)}(Cl)(CO)(2)] (4), which results from hydride insertion into the quinonic double bond. Protonation of 2 and 3 leads to the formation of the methylene arenium derivative [Os{4-(CH(2))-1-(OH)-2,6-(CH(3))(2)-3,5-(iPr(2)PCH(2))(2)C(6)}(Cl)(H)(PPh(3))][OSO(2)CF(3)] (5 a). The diphosphine 1 reacts with [OsCl(2)(PPh(3))(3)] at 100 degrees C under H(2) to afford [Os{1-(OH)-2,6-(CH(3))(2)-3,5-(iPr(2)PCH(2))(2)C(6)}(Cl)(H(2))(PPh(3))] (6), a PCP pincer complex resulting formally from C(sp(2))--C(sp(3)) cleavage of the C--CH(3) group in 1. C--C hydrogenolysis resulting in the same complex is achieved by heating 2 under H(2) pressure. Reaction of the diphosphine substrate with [OsCl(2)(PPh(3))(3)] under H(2) at lower temperature allows the observation of a methylene arenium derivative resulting from C--H activation, [Os{4-(CH(2))-1-(OH)-2,6-(CH(3))(2)-3,5-(iPr(2)PCH(2))(2)C(6)}(Cl)(2)(H)] (7). This compound reacts with PPh(3) in toluene to afford the ionic derivative [Os{4-(CH(2))-1-(OH)-2,6-(CH(3))(2)-3,5-(iPr(2)PCH(2))(2)C(6)}(Cl)(H)(PPh(3))]Cl (5 b). X-ray diffraction studies have been carried out on compounds 2, 3, 4, 5 b, 6, and 7, which allows the study of the structural variations when going from methylene arenium to quinone methide derivatives.     

Synthesis and structural diversity of barium (N,N-dimethylamino)diboranates

The reaction of a slurry of BaBr(2) in a minimal amount of tetrahydrofuran (THF) with 2 equiv of Na(H(3)BNMe(2)BH(3)) in diethyl ether followed by crystallization from diethyl ether at -20 °C yields crystals of Ba(H(3)BNMe(2)BH(3))(2)(Et(2)O)(2) (1). Drying 1 at room temperature under vacuum gives the partially desolvated analogue Ba(H(3)BNMe(2)BH(3))(2)(Et(2)O)(x) (1') as a free-flowing white solid, where the value of x varies from <0.1 to about 0.4 depending on whether desolvation is carried out with or without heating. The reaction of 1 or 1' with Lewis bases that bind more strongly to barium than diethyl ether results in the formation of new complexes Ba(H(3)BNMe(2)BH(3))(2)(L), where L = 1,2-dimethoxyethane (2), N,N,N',N'-tetramethylethylenediamine (3), 12-crown-4 (4), 18-crown-6 (5), N,N,N',N'-tetraethylethylenediamine (6), and N,N,N',N",N"-pentamethylethylenetriamine (7). Recrystallization of 4 and 5 from THF affords the related compounds Ba(H(3)BNMe(2)BH(3))(2)(12-crown-4)(THF)·THF (4') and Ba(H(3)BNMe(2)BH(3))(2)(18-crown-6)·2THF (5'). In addition, the reaction of BaBr(2) with 2 equiv of Na(H(3)BNMe(2)BH(3)) in the presence of diglyme yields Ba(H(3)BNMe(2)BH(3))(2)(diglyme)(2) (8), and the reaction of 1 with 15-crown-5 affords the diadduct [Ba(15-crown-5)(2)][H(3)BNMe(2)BH(3)](2) (9). Finally, the reaction of BaBr(2) with Na(H(3)BNMe(2)BH(3)) in THF, followed by the addition of 12-crown-4, affords the unusual salt [Na(12-crown-4)(2)][Ba(H(3)BNMe(2)BH(3))(3)(THF)(2)] (10). All of these complexes have been characterized by IR and (1)H and (11)B NMR spectroscopy, and the structures of compounds 1-3, 4', 5', and 6-10 have been determined by single-crystal X-ray diffraction. As the steric demand of the Lewis bases increases, the structure changes from polymers to dimers to monomers and then to charge-separated species. Despite the fact that several of the barium complexes are monomeric in the solid state, none is appreciably volatile up to 200 °C at 10(-2) Torr.     

Fluorocarbon soluble copper(II) carboxylate complexes with nonfluoroponytailed nitrogen ligands as precatalysts for the oxidation of alkenols and alcohols under fluorous biphasic or thermomorphic modes: structural and mechanistic aspects

This fluorous biphasic catalysis (FBC) contribution was focused on the synthesis and characterization of new fluorous soluble R(f)-Cu(II) carboxylate complexes containing nonfluoroponytailed ligands and defines their role as precatalysts for the FBC oxidation of alkenols and alcohols in the presence of 2,2,6,6-tetramethylpiperidine-N-oxyl (TEMPO)/O(2). In this FBC approach, we have utilized the phase-switching technique of Vincent et al. (J. Am. Chem. Soc. 2002, 124, 12942) to solubilize the nonfluoroponytailed ligands, N-1,4,7-Me(3)TACN, 2, and N-1,4,7-pentamethyldiethylenetriamine (PMDETA), 3, by reaction with a fluorous solvent-soluble copper (II) dimeric complex, [Cu({C(8)F(17)(CH(2))(2)}(2)CHCO(2))(2)](2), 1. Moreover, the reaction of nonfluoroponytailed ligands 2 and 3 with 1 afforded new perfluoroheptane-soluble Cu(II) complexes, [Cu({C(8)F(17)(CH(2))(2)}(2)CHCO(2))(2)(2)], 4, and [Cu({C(8)F(17)(CH(2))(2)}(2)CHCO(2))(2) (3)], 5, respectively. The known Cu(II) complex, 1, was further characterized by electron paramagnetic resonance (EPR) spectroscopy confirming its dimeric structure, while 4 and 5 were characterized by elemental analysis, IR, diffuse reflectance UV-vis, and EPR spectroscopy. Furthermore, 1, 4, and 5 were evaluated as precatalysts for alkenol and alcohol oxidation. The oxidation reactions of alkenols and alcohols in the presence of TEMPO/O(2) proceeded under FBC conditions for 1, 4, and 5, but 1-octanol was unreactive under single-phase FBC conditions at 90 degrees C with TEMPO/O(2). The thermomorphic property of 5, soluble in chlorobenzene/toluene at 90 degrees C but insoluble at room temperature, was also evaluated in the selective oxidation of p-nitrobenzyl alcohol to p-nitrobenzaldehyde. Plausible mechanisms concerning these FBC/thermomorphic oxidation reactions will be discussed.