A general approach for the growth of metal oxide nanorod arrays on graphene sheets and their applications

In the fabrication of flexible devices, highly ordered nanoscale texturing, such as semiconductor metal oxide nanorod arrays on flexible substrates, is critical for optimal performance. Use of transparent conducting films, metallic films, and polymer substrates is limited by mechanical brittleness, chemical and thermal instability, or low electrical conductivity, low melting point, and so on. A simple and general nanocrystal-seed-directed hydrothermal route has now been developed for large-scale growth of nanorod arrays of various semiconductor metal oxides (MO), including TiO(2), ZnO, MnO(2), CuO, and ZrO(2) on both sides of flexible graphene (G) sheets to form sandwichlike MO/G/MO heterostructures. The TiO(2)/G/TiO(2) heterostructures have much higher photocatalytic activity than TiO(2) nanorods, with a photocatalytic degradation rate of methylene blue that is four times faster than that of the TiO(2) nanorods, and are thus promising candidates for photocatalytic decontamination.     

On-surface synthesis of porous graphene nanoribbons containing nonplanar [14]annulene pores

The precise introduction of nonplanar pores in the backbone of graphene nanoribbon represents a great challenge. Here, we explore a synthetic strategy toward the preparation of nonplanar porous graphene nanoribbon from a predesigned dibromohexabenzotetracene monomer bearing four cove-edges. Successive thermal annealing steps of the monomers indicate that the dehalogenative aryl-aryl homocoupling yields a twisted polymer precursor on a gold surface and the subsequent cyclodehydrogenation leads to a defective porous graphene nanoribbon containing nonplanar [14]annulene pores and five-membered rings as characterized by scanning tunneling microscopy and noncontact atomic force microscopy. Although the C–C bonds producing [14]annulene pores are not achieved with high yield, our results provide new synthetic perspectives for the on-surface growth of nonplanar porous graphene nanoribbons.     

An efficient way to functionalize graphene sheets with presynthesized polymer via ATNRC chemistry

Graphene nanosheets offer intriguing electronic, thermal and mechanical properties and are expected to find a variety of applications in high‐performance nanocomposite materials. The great challenge of exfoliating and dispersing pristine graphite or graphene sheets in various solvents or matrices can be achieved by facilely and properly chemical functionalization of the carbon nanosheets. Here we reported an efficient way to functionalize graphene sheets with presynthesized polymer via a combination of atom transfer nitroxide radical coupling chemistry with the grafting‐onto strategy, which enable us to functionalize graphene sheets with well‐defined polymer synthesized via living radical polymerization. A radical scavenger species, 2,2,6,6‐tetramethylpiperidine‐1‐oxyl (TEMPO), was firstly anchored onto ? COOH groups on graphene oxide (GO) to afford TEMPO‐functionalized graphene sheets (GS‐TEMPO), meanwhile, the GO sheets were thermally reduced. Next, GS‐TEMPO reacted with Br‐terminated well‐defined poly(N‐isopropylacrylamide) (PNIPAM) homopolymer, which was presynthesized by SET‐LRP, in the presence of CuBr/N,N,N′,N′,N″‐pentamethyldiethylenetriamine to form PNIPAM‐graphene sheets (GS‐PNIPAM) nanocomposite in which the polymers were covalently linked onto the graphene via the alkoxyamine conjunction points. The PNIPAM‐modified graphene sheets are easily dispersible in organic solvents and water, and a temperature‐induced phase transition was founded in the water suspension of GS‐PNIPAM. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

甲烷在层状石墨烯和活性炭上的吸附平衡

以吸附式天然气（ANG）吸附剂的工程应用为目的,以0-10 MPa、283.15-303.15 K甲烷在层状石墨烯（GS（3D）,比表面积2062 m²/g）和活性炭SAC-01（比表面积1507 m²/g）上的吸附平衡数据作分析。首先,在77.15 K下由氮气吸附表征样品的孔径大小及分布（PSD）和比表面积。其次,选择极低压力下的吸附平衡数据标定亨利定律常数,确定甲烷在两吸附剂上的极限吸附热,并由维里方程和10-4-3势能函数计算甲烷与两吸附剂壁面之间的相互作用势。最后,依据测试的甲烷在吸附剂上的高压吸附平衡数据,比较了Langmuir系列方程的关联数据后的拟合精度,并由绝对吸附量计算了甲烷的等量吸附热。结果表明,甲烷在GS（3D）和活性炭SAC-01上的平均极限吸附热为23.07、20.67 kJ/mol;283.15 K下甲烷分子与GS（3D）和活性炭SAC-01之间的交互作用势ε_sf/k为67.19、64.23 K,与洛伦混合法则的计算值64.60 K相近;Toth方程关联甲烷在活性炭SAC-01和GS（3D）上吸附平衡数据的拟合累计相对误差为0.25%和2.29%;甲烷在活性炭SAC-01和GS（3D）上的等量吸附热平均值为16.8和18.3 kJ/mol。相对于活性炭SAC-01,比表面积和微孔容积均较高的GS（3D）对甲烷的吸附更具有优势。     

From conception to realization: an historial account of graphene and some perspectives for its future

There has been an intense surge in interest in graphene during recent years. However, graphene-like materials derived from graphite oxide were reported in 1962, and related chemical modifications of graphite were described as early as 1840. In this detailed account of the fascinating development of the synthesis and characterization of graphene, we hope to demonstrate that the rich history of graphene chemistry laid the foundation for the exciting research that continues to this day. Important challenges remain, however; many with great technological relevance.     

Growing graphene sheets from reactions with methyl radicals: a quantum chemical study.

Hydrogen abstraction reactions by methyl radicals on the zigzag and armchair edges of perylene are studied by density functional theory (DFT) to explore various growth pathways that seem to be in line with experimental observations. The DFT approach is validated by comparing the results obtained from calculations with six different functionals with those obtained from correlated ab initio methods, thereby emphasizing the calculation of reaction barriers. A useful compromise between accuracy and computational cost is provided by DFT, and possible pathways are studied in detail at this level of calculation. Our computational study is carried out by ordering, as a first step, all of the isomers that arise from the abstraction of one or two H atoms from 1,12-dimethyl-1,12-dihydroperylene and 3,4-dimethyl-3,4-dihydroperylene with respect to their energies. Subsequently, only those pathways that connect low-energy isomers are investigated. The calculations reveal that the selected pathways are favored thermodynamically, and also that the reaction barriers are somewhat higher than the energy locally available for the respective reaction. Notably, in the case of 3,4-dimethyl-3,4-dihydroperylene, the first two reaction steps have no or only a very low reaction barrier. The final conclusion of our study is that a cascade of reactions is possible that leads to the growth of a graphene sheet on a graphite surface.     

Visualizing chemical reactions confined under graphene

An undercover agent: graphene has been used as an imaging agent to visualize interfacial reactions under its cover, and exhibits a strong confinement effect on the chemistry of molecules underneath. In a CO atmosphere, CO penetrates into the graphene/Pt(111) interface and reacts with O(2) therein, whereas intercalated CO desorbs from the Pt surface.     

Conjugated-carbon nanostructures: Emergences

General emergent features of conjugated-carbon nanostructures are sought. Here, “general” indicates applicability over a broad class of such structures, including graphene and buckytubes, possibly with boundaries or other sorts of defects or decorations, or rather general substructures of graphene or of buckytubes. In addition, “emergent” means that different characteristics and properties are novel and are evidenced from different models, for example, from resonance theory and Hückel theory, preferably with evidence that the features persist upon elaboration. One robust emergent feature is “Dirac cones” in the band structure of graphene and some related materials. Another interesting feature is novel “blended” boundary orbitals that are delocalized longitudinally along the boundary direction while being variably localized in the transverse direction. Furthermore, defects at the ends of polymer chains may be localized or delocalized depending on local features—although the ideas apply more widely to different conjugated-carbon structures including molecules. Explicit formulas are derived to elucidate the asymptotic behavior of unpaired electron density at the ends of selected benzenoid polymers and its relation to the associated HOMO-LUMO gap. Our approach offers a general framework to understand ab initio results, which may, at first sight, appear to be unconventional or counterintuitive to some common ideas of bonding patterns in conjugated carbon nanostructures.     

准二维金属硫属化合物类石墨烯结构的化学合成与组装

无机类石墨烯属于准二维纳米结构体系,因其具有比纯碳石墨烯本身更多的调控参数,比如带隙类型及其带隙宽度可调节等,在电子器件构筑和能量转化存储等领域有着重要的科学意义和广阔的应用前景．近年来,具有准二维特征的金属硫属化合物（metalchalcogenides,MCs）作为类石墨烯结构的重要材料体系受到了广泛关注．本文概述了近年来金属硫属化合物类石墨烯结构的化学制备方法及其可能的组装应用,提出了通过系列方法影响层间作用力及利用晶体各向异性等材料设计与合成策略来实现类石墨烯的化学合成,并展望了类石墨烯的组装结构在能量存储与智能传感领域的应用前景．     

Multilayer graphene/amorphous carbon hybrid films prepared by microwave surface‐wave plasma CVD: synthesis and characterization

Hybrid films of multilayer graphene (MG) containing amorphous carbon (a‐C) were synthesized on Al substrates by microwave surface‐wave plasma chemical vapor deposition. Raman scattering and surface transmission electron microscopy showed that the carbon films contained a large quantity of MG when a radio frequency (RF) substrate bias was not applied. Amorphization of graphene in the carbon film was promoted by applying an RF bias, which generated Ar⁺ in the plasma. The bandgaps of the films were found to increase as the Raman intensity ratios between the 2D‐band (at 2700 cm^?1) and D‐band (at 1350 cm^?1) decreased, indicating the formation of a‐C. The MG/a‐C all‐sp² phase of carbon hybrid films exhibited an increase in current density under 5 mW/cm² of AM1.5G solar simulated irradiation as the RF bias increased because of Ar⁺‐induced amorphization of the graphene. Copyright © 2016 John Wiley & Sons, Ltd.     

Graphene: The New Two‐Dimensional Nanomaterial

Every few years, a new material with unique properties emerges and fascinates the scientific community, typical recent examples being high‐temperature superconductors and carbon nanotubes. Graphene is the latest sensation with unusual properties, such as half‐integer quantum Hall effect and ballistic electron transport. This two‐dimensional material which is the parent of all graphitic carbon forms is strictly expected to comprise a single layer, but there is considerable interest in investigating two‐layer and few‐layer graphenes as well. Synthesis and characterization of graphenes pose challenges, but there has been considerable progress in the last year or so. Herein, we present the status of graphene research which includes aspects related to synthesis, characterization, structure, and properties.     

A powerful approach to fabricate nitrogen-doped graphene sheets with high specific surface area

This study develops a powerful strategy for fabricating the nitrogen-doped graphene sheets with good crystallinity, high specific surface area, and high percentages of pyridinic/graphitic-nitrogen structures. Due to the specified N-doping structures and high specific surface area of 719 m² g^− 1, our N-doped graphene sheets show an excellent electrocatalytic activity for the oxygen reduction reaction (ORR).     

Rational chemical strategies for carbon nanotube functionalization

Whereas the chemistry of fullerenes is well-established, the chemistry of single-walled carbon nanotubes (SWNTs) is a relatively unexplored field of research. Investigations into the bonding of moieties onto SWNTs are important because they provide fundamental structural insight into how nanoscale interactions occur. Hence, understanding SWNT chemistry becomes critical to rational, predictive manipulation of their properties. Among the strategies discussed include molecular metal complexation with SWNTs to control site-selective chemistry in these systems. In particular, work has been performed with Vaska's and Wilkinson's complexes to create functionalized adducts. Functionalization should offer a relatively simple means of tube solubilization and bundle exfoliation, and also allows for tubes to be utilized as recoverable catalyst supports. Solubilization of oxidized SWNTs has also been achieved through derivatization by using a functionalized organic crown ether. The resultant adduct yielded concentrations of dissolved nanotubes on the order of 1 g L(-1) in water and at elevated concentrations in a range of organic solvents, traditionally poor for SWNT manipulation. To further demonstrate chemical processability of SWNTs, we have subjected them to ozonolysis, followed by treatment with various independent reagents, to rationally generate a higher proportion of oxygenated functional groups on the nanotube surface. This protocol has been found to purify nanotubes. More importantly, the reaction sequence has been found to ozonize the sidewalls of these nanotubes. Finally, SWNTs have also been chemically modified with quantum dots and oxide nanocrystals. A composite heterostructure consisting of nanotubes joined to nanocrystals offers a unique opportunity to obtain desired physical, electronic, and chemical properties by adjusting synthetic conditions to tailor the size and structure of the individual sub-components, with implications for self-assembly.     

Recent Progress in Two-Dimensional Antimicrobial Nanomaterials

Nowadays, microorganisms, including bacteria and viruses, are regarded as new environmental pollutants and pose serious threats to public health. Yet, traditional disinfection approaches for bacteria and viruses are generally ineffective. Furthermore, they exhibit the disadvantages of high-energy consumption, environmental pollution, high cost, and toxic byproduct generation. In this respect, nanomaterials display promising antimicrobial capabilities due to their unique properties and provide solutions to the abovementioned issues. Herein, recent progress in the development of 2D nanomaterials displaying antimicrobial capabilities is highlighted. The structures, morphologies, and performances of essential metal, graphene, and nitride-based 2D antibacterial nanomaterials are summarized in detail. In addition, possible antimicrobial mechanisms and the relationship between structure and antimicrobial efficiency are elaborated.     

Synthesis and growth mechanism of Bi2S3 nanoribbons

This article describes a facile solvothermal method by using mixed solvents for the large-scale synthesis of Bi(2)S(3) nanoribbons with lengths of up to several millimeters. These nanoribbons were formed by a solvothermal reaction between Bi(III)-glycerol complexes and various sulfur sources in a mixed solution of aqueous NaOH and glycerol. HRTEM (high-resolution transmission electron microscopy) and SAED (selective-area electron diffraction) studies show that the as-synthesized nanoribbons had predominately grown along the [001] direction. The Bi(2)S(3) nanoribbons prepared by the use of different sulfur sources have a common formation process: the initial formation of NaBiS(2) polycrystals, which serve as the precursors to Bi(2)S(3), the decomposition of NaBiS(2), and the formation of Bi(2)S(3) seeds in the solution through a homogeneous nucleation process; the growth of Bi(2)S(3) nanoribbons occurs at the expense of NaBiS(2) materials. The growth mechanism of millimeter-scale nanoribbons involves a special solid-solution-solid transformation as well as an Ostwald ripening process. Some crucial factors affect nanoribbon growth, such as, solvothermal temperature, volume ratio of glycerol to water, and the concentration of NaOH; these have also been discussed.     

Sonochemical Formation of Copper/Iron-Modified Graphene Oxide Nanocomposites for Ketorolac Delivery

A feasible sonochemical approach is described for the preparation of copper/iron-modified graphene oxide nanocomposites through ultrasonication (20 kHz, 18 W cm⁻²) of an aqueous solution containing copper and iron ion precursors. Unique copper-, copper/iron- and iron-modified graphene oxide nanocomposites have a submicron size that is smaller than that of pristine GO and a higher surface area enriched with Cu₂O, CuO, and Fe₂O₃ of multiform phases (α-, β-, ϵ-, or γ), FeO(OH), and sulfur- or carbon-containing compounds. These nanocomposites are sonochemically intercalated with the nonsteroidal anti-inflammatory drug ketorolac, which results in the formation of nanoscale carriers. Ketorolac monotonically disintegrates from these nanoscale carriers in aqueous solution upon adjustment of the pH from 1 to 8. The disintegration of ketorolac proceeds at a slower rate from the copper/iron-modified graphene oxide at increased pH, but at a faster rate from the iron-modified graphene oxide under acidic conditions.     

Enhancing the pyrolysis of scrap rubber for carbon nanotubes/graphene production via chemical vapor deposition

Carbon nanostructures are considered nowadays as very important materials for both fundamental research and industrial applications because of their well-defined morphologies, which leads to excellent performance in various fields. This study presents the preparation of carbon nanostructures starting from cheap source represented by scrap rubber after pursuing optimized pyrolysis of scrap rubber at 500^oC as deduced from thermal gravimetric analysis (TGA). The resulting cracked hydrocarbons from pyrolysis were collected over a well-designed Fe-Ni-Cu/MgO as catalyst via chemical vapor deposition (CVD), in which a growth temperature of 750^oC was undertaken for 60 min. A further attempt was elaborated where the scrap rubber was exposed to thermal aging at 90^oC for 14 days prior to CVD of its pyrolysis products in order to enhance the cracking process and increase the yield of the lighter hydrocarbons produced which leads to formation of well-defined carbon nanostructures. Characterizations on the produced carbon nanostructures were achieved using transmission electron microscopy (TEM) and Raman spectroscopy. The adsorption of methylene blue on the carbon nanostructures was also studied. The characterizations confirmed that the morphology of the resulting carbon nanostructures derived from scrap rubber without prior thermal aging composed of graphene sheets wrapping carbon nanotubes (CNTs-A). After thermal aging of scrap rubber prior to pyrolysis and CVD, the produced carbon nanostructures composed principally of CNTs (CNTs-B) in a well-defined form in higher yield. The Langmuir model appeared to be best-fitting the adsorption of MB on both samples. High monolayer adsorption capacity of 95 mg MB/g was accomplished in case of CNTs-A versus 60 mg MB/g in case of CNTs-B, respectively. Ultraviolet-Visible (UV-Vis.) spectroscopic study revealed that the presence of MB molecules on the surface of CNTs may enhance the electronic properties of the prepared samples.