Preparative enrichment and separation of astragalosides from Radix Astragali extracts using macroporous resins

The enrichment and separation of astragalosides I–IV (AGs I–IV) were studied on eight macroporous resins in the present study. SA‐3 resin offered the best adsorption and desorption capacities for AGs I–IV than other resins. The models of adsorption kinetics were investigated in order to elucidate the mechanism of adsorption. The pseudo‐second‐order model was the better choice than the pseudo‐first‐order model to describe the adsorption behavior of AGs I–IV onto SA‐3 resin. The equilibrium experimental data were well fitted to Langmuir and Freundlich isotherms. SA‐3 resin adsorption chromatography tests were carried out to optimize the separation process of AGs I–IV from Radix Astragali extracts. With the optimum parameters for adsorption and desorption, the contents of AGs I–IV were 8.78‐, 11.60‐, 10.52‐ and 11.28‐fold increased with the recovery yields being 65.88, 90.92, 84.25 and 94.17%, respectively. The preparative enrichment and separation of AGs I–IV from Radix Astragali extracts can be easily and effectively achieved by SA‐3 resin adsorption chromatography. The developed methodology can also be referenced for the separation of other active constituents from herbal materials and manufacture of Radix Astragali products.     

Determination of vitexin and isovitexin in pigeonpea using ultrasonic extraction followed by LC-MS

A method based on ultrasonic extraction (USE) followed by LC-MS is presented for the determination of vitexin and isovitexin in pigeonpea extracts in this study. The influential parameters of the USE procedure were optimized, and the optimal conditions were as follows: extraction solvent, 60% ethanol solution; liquid/solid ratio 10:1 (mL/g), extraction power, 250 W; temperature, 40-50 degrees C; and three extraction cycles, each cycle 15 min. Validation of the USE method was performed in terms of repeatability and reproducibility. RSDs for extraction yields were lower than 5.85 and 8.09%, respectively. The LOD and LOQ of chromatographic determination were 0.96 and 3.2 ng/mL for vitexin and 0.84 and 2.8 ng/mL for isovitexin. The method was also successfully applied for the determination of vitexin and isovitexin in stems, leaves, and root extracts of pigeonpea. From all these results, we may conclude that the developed method is appropriate for the quality control of pigeonpea and other plant extract products developed from pigeonpea.     

Optimization of luteolin separation from pigeonpea [Cajanus cajan (L.) Millsp.] leaves by macroporous resins

In the present study, the performance and separation characteristics of eight macroporous resins for the separation of luteolin (LU) from pigeonpea leaves extracts have been evaluated. The adsorption and desorption properties of LU on macroporous resins including AB-8, NKA-9, NKA-2, D3520, D101, H1020, H103 and AL-2 have been compared. AL-2 resin offers the best adsorption and desorption capacity for LU than other resins based on the research results, and its adsorption data at 25 degrees C fit best to the Freundlich isotherm. Dynamic adsorption and desorption experiments have been carried out with the column packed by AL-2 resin to optimize the separation process of LU from pigeonpea leaves extracts. The optimum parameters for adsorption were sample solution LU concentration 65.5 microg/ml, pH 5, processing volume 3 BV, flow rate 1.5BV/h, temperature 25 degrees C; for desorption were elution solvent ethanol-water (50:50, v/v) 2 BV and followed by ethanol-water (60:40, v/v) 2 BV, and flow rate 1BV/h. After treated with AL-2 resin, the LU content in the product was increased 19.8-fold from 0.129% to 2.55%, with a recovery yield of 78.54%. The results showed that AL-2 resin revealed a good ability to separate LU. Therefore, we conclude that results in this study may provide scientific references for the large-scale LU production from pigeonpea or other plants extracts.     

Preparative separation of isovitexin and isoorientin from Patrinia villosa Juss by high-speed counter-current chromatography

High-speed counter-current chromatography (HSCCC) with a solvent system composed of ethyl acetate-n-butanol-water (2:1:3, v/v/v) was used to isolate and separate two C-glycosylflavones from Patrinia villosa Juss, a traditional Chinese medicine. The separation produced 42.9 mg isovitexin and 20.1 mg isoorientin with purities of 99.3% and 98.5%, respectively as determined by high-performance liquid chromatography (HPLC) in one step elution from 250 mg crude extract, and identification was performed by MS, 1H NMR and 13C NMR. It is the first report of discovering isovitexin and isoorientin from the plant of Patrinia genus.     

Preparative separation and enrichment of four taxoids from Taxus chinensis needles extracts by macroporous resin column chromatography

An environment‐friendly method was established for the preparative separation and enrichment of four taxoids, namely 10‐deacetylbaccatin III (10‐DAB III), 7‐xylosyl‐10‐deacetyltaxol (7‐xyl‐10‐DAT), cephalomannine and paclitaxel from Taxus chinensis needles extracts. Characteristics of seven widely used macroporous resins for four taxoids were compared, AB‐8 resin offered better adsorption and desorption capacities than others. AB‐8 resin column chromatography was used to study the desorption process for four taxoids. The optimum parameters for desorption were 30% ethanol 5 RV for removing impurities, following 15 RV for 10‐DAB III, after the desorption of impurities with 35% ethanol 10 RV, 45% ethanol 30 RV for 7‐xyl‐10‐DAT, then 65% ethanol 10 RV for cephalomannine and paclitaxel, the flow rate was 6 RV/h. After separation on AB‐8 resin column chromatography, the contents of 10‐DAB III, 7‐xyl‐10‐DAT, cephalomannine and paclitaxel in the product reached 4.58, 13.17, 1.36 and 3.08%, respectively, which were 7.63‐, 3.68‐, 6.18‐ and 6.55‐fold to those in T. chinensis needles extracts. The recovery yields were 94.96, 77.32, 88.09 and 95.25%. In general, the AB‐8 resin column chromatography has the advantages of lower cost, high efficiency and simple procedure. Therefore, it may provide scientific references for the preparative separation and enrichment of taxoids from other T. species.     

Enrichment and purification of madecassoside and asiaticoside from Centella asiatica extracts with macroporous resins

In present study, the performance and separation characteristics of five macroporous resins for the enrichment and purification of asiaticoside and madecassoside from Centella asiatica extracts have been evaluated. The adsorption and desorption properties of total triterpene saponins (80% purity) on macroporous resins including HPD100, HPD300, X-5, AB-8 and D101 have been compared. According to our results, HPD100 offered higher adsorption and desorption capacities and higher adsorption speed for asiaticoside and madecassoside than other resins. Column packed with HPD100 resin was used to perform dynamic adsorption and desorption tests to optimize the separation process of asiaticoside and madecassoside from C. asiatica extracts. After the treatment with gradient elution on HPD100 resin, the content of madecassoside in the product increased from 3.9 to 39.7%, and the recovery yield was 70.4%; for asiaticoside the content increased from 2.0 to 21.5%, and the recovery yield was 72.0%. The results showed that HPD100 resin revealed a good ability to separate madecassoside and asiaticoside, and the method can be referenced for the separation of other triterpene saponins from herbal raw materials.     

Preparative separation of the flavonoid fractions from Periploca forrestii Schltr. ethanol extracts using macroporous resin combined with HPLC analysis and evaluation of their biological activities

A preparative separation method using macroporous absorptive resin coupled with high‐performance liquid chromatography was developed for the separation of six fractions of the 80% ethanol extract of Periploca forrestii Schltr. The six ethanol fractions (5–95; A, B, C, D, E, and F) obtained were carefully analyzed to locate the corresponding peaks in the high‐performance liquid chromatography chromatogram of the total extract, which was established in a previous study. Furthermore, the biological activities, including antioxidant activities, acetyl cholinesterase inhibitory capacities, antihyaluronidase activities, and anti‐inflammatory effects, were evaluated in MH7A cells. The results demonstrated that fraction E could significantly prevent oxidation and inhibit hyaluronidase and acetyl cholinesterase. Finally, the main flavonoids in fractions A and E from P. forrestii Schltr. were purified, and the compounds were identified as chlorogenic acid, quercetin‐3‐O‐α‐L‐arabinopyranoside, and quercetin‐7‐O‐β‐D‐glucopyranoside. The chemical structures were confirmed by mass spectrometry and nuclear magnetic resonance spectroscopy. Furthermore, the inhibitory effects of these compounds against complete Freund's adjuvant‐induced secondary immune arthritis in rats were evaluated.     

Simultaneous enrichment and separation of flavonoids from Herba Epimedii by macroporous resins coupled with preparative chromatographic method

An efficient, feasible enrichment and separation method of epimedins A, B, C and icariin from Herba Epimedii was developed by the combination of microwave-assisted extraction, macroporous resins and preparative HPLC. WDX-5 macroporous resin shows better recoveries at 96.2%, 97.0%, 98.2% and 97.1% for epimedins A, B, C and icariin than other macroporous resins used in the experiments. As a result, epimedins A (5.1 mg), B (15.3 mg), C (7.6 mg) and icariin (14.3 mg) were obtained from 6.0 g crude Herba Epimedii with the recoveries at 70.8%, 68.9%, 66.7% and 95.3%, respectively. The method developed in this study may provide scientific references for the enrichment and separation of flavonoids from Herba Epimedii.     

Development of a process for separation of mogroside V from Siraitia grosvenorii by macroporous resins

A separation method was developed for the preparative separation and enrichment of the non-caloric sweetener mogroside V from Siraitia grosvenorii. The adsorption properties of six macroporous resins were evaluated. Results showed that HZ 806 resin offered the best adsorption and desorption capacities. Based on the adsorption experiments on HZ 806, the adsorption data were found to fit the Freundlich model well. The pseudo-second-order kinetic model showed the highest correlation with the experimental results. Separation was performed with deionized water and 40% aqueous ethanol solution as mobile phases. In a typical run, 100 g of herb was processed and 3.38 g of mogroside V with a purity of 10.7% was harvested. This separation method provided a 15.1-fold increase in the purification factor from 0.5% to 10.7%. The present study showed that HZ 806 resins were effective for the separation and enrichment of mogroside V from S. grosvenorii.     

Preparative separation of crocins and geniposide simultaneously from gardenia fruits using macroporous resin and reversed‐phase chromatography

Gardenia fruits contain valuable natural food colorants including crocins (gardenia yellow) and geniposide. In this study, a process for the enrichment of crocins and geniposide simultaneously from gardenia fruits was developed using macroporous resin and RP chromatography. The performance of eight different types of macroporous resins was evaluated. Static absorption/desorption experiments revealed that LX60 possessed optimal separating capacity. Further dynamic absorption/desorption experiments on LX60 columns were conducted to obtain the optimal parameters. After one run treatment with LX60, the content of crocin‐1 in gardenia yellow reached 29.6%, while geniposide in another fraction reached 83.4%. An extract of crocins was obtained from gardenia yellow in a second‐stage separation using RP medium‐pressure LC, with its color value to be 756 and the content of crocin‐1 reaching 60.8%. The separation process was highly efficient, low cost, and compact, which may be informative for purifications of other natural products from complex plant extracts.     

Preparative isolation and purification of flavone compounds from sophora japonica L. by high-speed counter-current chromatography combined with macroporous resin column separation

High-speed counter-current chromatography combined with macroporous resin column separation was applied to the isolation and purification of genistein-7,4'-di-O-beta-D-glucoside (I), genistein-7-O-beta-D-glucopyranoside-4'-O-[(alpha-L-rhamnopyransoyl)-(1-2)-beta-D-glucopyranoside] (II), kaempferol-3-O-beta-D-sophoroside(III), quercetin-3-O-beta-L-ramnopyranosyl-(1 - 6)-beta-D-glucopyranoside (IV), genistein-4'-beta-L-rhamnopyransoyl-(1 - 2)-alpha-D-glucopyranoside (V), and kaempferol-3-O-beta-L-ramnopyranosyl-(1 - 6)-beta-D-glucopyranoside (VI) from the Chinese medicinal herb Sophora japonica L. The crude extracts from the pericarps of Sophora japonica L. were pre-separated on a D-101 macroporous resin column and divided into two parts as sample 1 and sample 2. An 80-mg portion of sample 1 was separated by using n-butanol-acetic acid (1%) (5:5, v/v) as the two-phase solvent system and yielded 30.1 mg of compound I, 23.3 mg of compound II. A 120 mg portion of sample 2 was separated by using ethyl acetate-n-butanol-acetic acid (1%) (5:0.8:5, v/v) as the two-phase solvent system and yielded 5.5 mg of compound III, 31.7 mg of compound IV, 37.4 mg of compound V, and 6.2 mg of compound VI. The purities of compounds I, II, III, IV, V, and VI were 98.7, 98.2, 97.8, 98.5, 99.3, and 98.9%, respectively, as determined by HPLC. The chemical structures of these components were identified by 1H-NMR and 13C-NMR.     

The application of macroporous resins in the separation of licorice flavonoids and glycyrrhizic acid

Glycyrrhizic acid (GA) and licorice flavonoids (LF) are the two classes of bioactive components in licorice with known pharmacological effects. But long-term excessive intake of GA may cause sodium retention and hypertension. In this study, the performance and adsorption characteristics of four widely used macroporous resins for the separation of deglycyrrhizinated, flavonoids enriched licorice has been critically evaluated. The sorption and desorption properties of LF and GA on macroporous resins including XDA-1, LSA-10, D101 and LSA-20 have been compared. The adsorption capacity was found to depend strongly on the pH of the feed solution. XDA-1 offers much higher adsorption capacity for GA and LF than other resins, and its adsorption data fit the best to the Freundlich isotherm. XDA-1 also shows much higher adsorption affinity towards LF than that of GA based on calculated results from the measured adsorption isotherms. Dynamic adsorption and desorption experiments have been carried out on a XDA-1 resin packed column to obtain optimal parameters for separating GA and LF. An enriched LF extract (about 21.9% purity) free of GA, and an enriched GA extract with 66% purity can be separated from crude licorice extract in one run.     

Separation of 7-xylosyl-10-deacetyl paclitaxel and 10-deacetylbaccatin III from the remainder extracts free of paclitaxel using macroporous resins

The separation and enrichment of 10-deacetylbaccatin III (10-DAB III) and 7-xylosyl-10-deacetyl paclitaxel were studied on seven macroporous resins with special structures. The performance of 7-xylosyl-10-deacetyl paclitaxel and 10-DAB III on macroporous resins including AB-8, ADS-17, ADS-21, ADS-31, ADS-8, H1020 and NKA-II was compared according to their adsorption and desorption properties. AB-8 provided a much higher adsorption capacity for 7-xylosyl-10-deacetyl paclitaxel and 10-DAB III than other resins, and its adsorption data fitted well to the Langmuir and Freundlich isotherm. According to the adsorption and desorption capacities and the adsorption isotherms, AB-8 demonstrated a remarkable capability for the preparative separation of 7-xylosyl-10-deacetyl paclitaxel and 10-DAB III from the remainder extracts free of paclitaxel. In order to optimize parameters of separation, dynamic adsorption and desorption experiments were carried out on the columns packed with AB-8 resin. The optimal conditions were: the processing volume 15 BV; concentrations of 7-xylosyl-10-deacetyl paclitaxel and 10-DAB III in feed solution 0.0657 mg/mL and 0.1494 mg/mL; flow rate 1 mL/min; temperature 35 degrees C. The gradient elution program was as follows: 30% ethanol for 3 BV, then 80% of ethanol for 6 BV, flow rate 1 mL/min. After the AB-8 resin treatment, the contents of 7-xylosyl-10-deacetyl paclitaxel and 10-DAB III in the product had increased from 0.053% and 0.2% to 3.34% and 1.69%, which were 62.43-fold and 8.54-fold of those in the untreated extracts, respectively, and the recoveries of 7-xylosyl-10-deacetyl paclitaxel and 10-DAB III were 85.85% and 52.78%. The performance achieved good separation and higher recovery of 7-xylosyl-10-deacetyl paclitaxel and 10-DAB III from remainder extracts free of paclitaxel by using AB-8 resin. It is a fast and effective method for the separation and enrichment of 7-xylosyl-10-deacetyl paclitaxel and 10-DAB III.     

Effect of mixed solvent media on the sorption and separation of uranium and plutonium on macroporous resins

Ion-exchange studies on uranium and plutonium using macroporous (MP) anion-exchange resins from an aqueous-organic solvent mixed media were carried out to develop a separation method. Out of the several water miscible organic solvents tried methanol and acetone were found to be best suited. Distribution data were obtained for U(VI) and Pu(IV) using three macroporous resins under various parameters. Based on these data, separation factors for Pu/U were calculated. Column experiments using Tulsion A-27(MP) were also carried out. The method has the advantage of loading plutonium from as low as 1M nitric acid in the presence of methanol or acetone and could be used satisfactorily for its recovery from solutions containing plutonium and uranium.     

Preparative separation of tetrahydrofurfurylamine enantiomers

Tetrahydrofurfurylamine enantiomers were separated on a preparative scale by fractional crystallization of diastereoisomeric salts with natural L-tartaric acid. (R)-Tetrahydrofurfurylamine was isolated in 68% yield with an optical purity of more than 98.5% according to the HPLC data.     

AB-8型大孔树脂分离提纯葛根素的研究

采用AB-8型大孔树脂对纯化葛根素的分离条件进行了研究,分别采用HPLC和薄层层析法研究了大孔树脂从葛根素粗品中分离葛根素的条件及影响因素。结果表明：采用AB-8型大孔树脂分离葛根素能够获得良好的分离效果。用大孔树脂分离葛根素具有操作简单、分离效果好等优点。     

Preparative purification of peoniflorin and albiflorin from peony rhizome using macroporous resin and medium-pressure liquid chromatography

Peoniflorin (PF) and albiflorin (AF) are two principal components of Paeonia species, which exhibit various biological activities such as improvement of blood circulation and immunoregulating function. To further utilization of waste parts of peony plants, an efficient method for preparative purification of these two ingredients from white peony rhizome was developed based on macroporous resin (MAR) and medium-pressure liquid chromatography (MPLC). The separation characteristics of nine typical MARs were investigated by static adsorption/desorption experiments, and LX38 was revealed as optimal one. Further static experiments with LX38 resin indicated that the adsorbents fitted well to the pseudo-second-order kinetics model and both Langmuir and Freundlich isotherm models. Based on the optimal process parameters, a large-scale preparation was successfully applied. After one run treatment with LX38, the contents of PF and AF were increased 15-fold to 24.5 and 16.8% in the refined extract, respectively. Both purified compounds were obtained from refined extract by reversed-phase MPLC at second-stage separation. The process developed is better because of its low cost, high efficiency, and procedural simplicity making it a potential approach for large-scale production of PF and AF for their further applications in functional foods and pharmaceuticals.     

Preparative chromatographic separation of enantiomers.

The potential of the chromatographic separation of enantiomers on a preparative scale as a tool for the isolation of optically pure compounds is gaining increasing recognition. This review surveys the different chiral stationary phases (CSPs) used for preparative chromatography, emphasizing the advantages and drawbacks of each. The strategy to be followed for preparative separations is discussed and tables summarizing separations reported in the literature give an overview of practical applications. Cellulose triacetate has been used most frequently, probably because of its broad application range and its low production costs in comparison with more recently introduced CSPs. Nevertheless, the high efficiency of some of the novel CSPs is likely to contribute to the further development and expansion of the method.     

Development and validation of an HPTLC method for simultaneous quantitation of isoorientin, isovitexin, orientin, and vitexin in bamboo-leaf flavonoids

A simple HPTLC method has been developed for the simultaneous determination of isoorientin, isovitexin, orientin, and vitexin, both pure and in commercial samples of bamboo-leaf flavonoids. The flavone C-glycosides, including isoorientin, isovitexin, orientin, and vitexin, were extracted from bamboo-leaf flavonoids with methanol and chromatographed on silica gel 60 plates in an automatic developing chamber with tetrahydrofuran-toluene-formic acid-water (16 + 8 + 2 + 1, v/v/v/v) mobile phase. Quantitation was obtained with UV detection at 350 nm. Polynomial calibration plots were constructed in the concentration range 200-1200 ng/zone for isoorientin, 100-600 ng/zone for isovitexin, 160-960 ng/zone for orientin, and 30-360 ng/zone for vitexin with good correlation coefficients (r > or = 0.9995). The method was validated for precision (interday and intraday), repeatability, and accuracy. Accuracy of the method was evaluated by a recovery study conducted at three different levels, and the average recovery was found to be 93.95% for isoorientin, 95.30% for isovitexin, 99.79% for orientin, and 100.46% for vitexin. The proposed HPTLC method for estimation of isoorientin, isovitexin, orientin, and vitexin was found to be simple, precise, specific, and accurate and can be used for manufacturing QC of bamboo-leaf flavonoids or for governmental regulatory purposes.