Determination of oxprenolol in human plasma by high-performance liquid chromatography, in comparison with gas chromatography and gas chromatography-mass spectrometry

A high-performance liquid chromatographic method for the quantitative assay of oxprenolol in human plasma is described. After addition of alprenolol as internal standard, the compounds are extracted from plasma at alkaline pH into an organic phase and back-extracted into an acidic aqueous phase. Separation of the plasma components and metabolites was achieved on a reversed-phase column. Concentrations down to 66 nmol/l (20 ng/ml) can be determined with UV detection at 222 nm. This technique compares favourably with gas chromatographic and gas chromatographic-mass spectrometric methods.     

Direct determination of several elements in MIBK extract by high-power nitrogen-oxygen mixed gas microwave-induced plasma optical emission spectrometry

A nitrogen-oxygen mixed gas microwave-induced plasma with an Okamoto cavity was employed as an atomization and excitation source for emission spectrometric analysis of organic solvent samples. Nitrogen–oxygen mixed gas produces very a stable microwave-induced plasma that is highly robust to the loading of 4-methyl-2-pentanone (MIBK), possibly because the organic solvent is completely combusted in the oxygen-containing plasma. After extracting test solutions containing Al, Co, Cr(III), Cu, Fe(III), Mo(VI), Ni, Pb with MIBK, both the aqueous phase and the organic phase were aspirated into the microwave-induced plasma, yielding linear calibration curves for both the species in the aqueous phase (Al, Co, Cr, Ni, and Pb) and those in the organic phase (Fe and Mo). These results indicate that Fe and Mo can be extracted with MIBK, which is explained by the partition coefficients of these elements in MIBK.     

Determination of remoxipride in human plasma and urine by reversed-phase ion-pair high-performance liquid chromatography.

A sensitive method is described for the measurement of remoxipride in human plasma and urine. Remoxipride and its internal standard are extracted from plasma or urine at pH 12 with a mixture of hexane and methyl tert.-butyl ether. After washing the organic phase with base, the compounds are extracted into acid and analyzed on a C18 column with ultraviolet detection at 214 nm. The mobile phase is composed of acetonitrile and aqueous buffer (sodium perchlorate and phosphoric acid, pH 1.7). The limits of reliable quantitation for remoxipride are 12.5 and 50 ng/ml for plasma and urine, respectively. The run times are 6 min for plasma and 3 min for urine. The method has been successfully used to assay remoxipride clinical study samples. This mobile phase has also been successfully applied to the analysis of other basic drugs such as cimetidine, codeine, diltiazem and quinidine with minor modifications.     

Development of new extraction method based on liquid–liquid–liquid extraction followed by dispersive liquid–liquid microextraction for extraction of three tricyclic antidepressants in plasma samples

In the present study, a new extraction method based on a three–phase system, liquid–liquid–liquid extraction, followed by dispersive liquid–liquid microextraction has been developed and validated for the extraction and preconcentration of three commonly prescribed tricyclic antidepressant drugs – amitriptyline, imipramine, and clomipramine – in human plasma prior to their analysis by gas chromatography–flame ionization detection. The three phases were an aqueous phase (plasma), acetonitrile and n–hexane. The extraction mechanism was based on the different affinities of components of the biological sample (lipids, fatty acids, pharmaceuticals, inorganic ions, etc.) toward each of the phases. This provided high selectivity toward the analytes since most interferences were transferred into n–hexane. In this procedure, a homogeneous solution of the aqueous phase (plasma) and acetonitrile (water–soluble extraction solvent) was broken by adding sodium sulfate (as a phase separating agent) and the analytes were extracted into the fine droplets of the formed acetonitrile. Next, acetonitrile phase was mixed with 1,2–dibromoethane (as a preconcentration solvent at microliter level) and then the microextraction procedure mentioned above was performed for further enrichment of the analytes. Under the optimum extraction conditions, limits of detection and lower limits of quantification for the analytes were obtained in the ranges of 0.001–0.003 and 0.003–0.010 μg mL⁻¹, respectively. The obtained extraction recoveries were in the range of 79–98%. Intra– and inter–day precisions were < 7.5%. The validated method was successfully applied for determination of the selected drugs in human plasma samples obtained from the patients who received them.     

Sensitive HPLC Assay for Ketoprofen in Human Plasma and its Application to Pharmacokinetic Study

Abstract

A selective and sensitive HPLC method was developed for the analysis of ketoprofen in human plasma. The assay involves an extraction of the drug and the internal standard (piroxicam) into diethyl ether from acidified plasma and then back-extracted into a small volume of alkaline aqueous solution before injection onto the HPLC column. A microbore column (2 mm I.D. × 10 cm) packed with a C18 reversed-phase material (5 pm ODS Hypersil) was used. The chromatographic separation was accomplished with a mobile phase comprising a mixture of acetonitrile-methanol-water (15 :20 : 65, v/v) containing 10 mM Na2HP04 buffer, pH 4. The mobile phase was pumped at a flow rate of 0.5 dmin. The eluant was monitored at 258 nm. With this procedure coefficients of variation were less than 10%. The detectionlimit was 0.05 μg/ml (i.e., 50 ng/ml) of plasma. The highly sensitive nature of this method was applied successfully to the dewmination of ketoprofen in human plasma for phmacokinetic studies.     

Evaluation of several solid phase extraction liquid chromatography/tandem mass spectrometry on-line configurations for high-throughput analysis of acidic and basic drugs in rat plasma

Several configurations using 6- and 10-port switching valves were studied for high flow, on-line extraction of rat plasma coupled to an electrospray triple quadrupole mass spectrometer. Each plasma sample was diluted 1:1 with an aqueous internal standard solution. The sample was injected into a 2.1 x 20 mm cartridge column packed with 25 microm divinylbenzene/N-vinylpyrrolidone packing using 100% aqueous mobile phase at 4 mL/min. After sample loading and sample cleanup, the analytes were eluted from the extraction column with a 1.0-min gradient at 0.4 mL/min. The samples were either analyzed directly after elution from the extraction column or after additional separation using a short high performance liquid chromatography (HPLC) column. The different configurations were tested using an acidic drug (diflunisal) and a basic drug (clemastine) in rat plasma. On-line analysis was performed by injecting 200 microL of diluted plasma. The mass spectrometer was operated in the multiple reaction monitoring (MRM) mode. All calibration standards gave relative standard deviations (RSDs) below 5%. The total time per sample was 3 min.     

Salting‐out assisted liquid/liquid extraction with acetonitrile: a new high throughput sample preparation technique for good laboratory practice bioanalysis using liquid chromatography–mass spectrometry

Acetonitrile, an organic solvent miscible with aqueous phase, has seen thousands of publications in the literature as an efficient deproteinization reagent. The use of acetonitrile for liquid–liquid extraction (LLE), however, has seen very limited application due to its miscibility with aqueous phase. The interest in LLE with acetonitrile has been pursued and reported in the literature by significantly lowering the temperature of the mixture or increasing the salt concentration in the mixture of acetonitrile and aqueous phase, resulting in the separation of the acetonitrile phase from aqueous phase, as observed in conventional LLE. However, very limited application of these methods has been reported. The throughput was limited. In this report, we report a new sample preparation technique, salting‐out assisted liquid–liquid extraction with acetonitrile, for high‐thoughput good laboratory practice sample analysis using LCMS, Two compounds from an approved drug, Kaletra^®, were used to demonstrate the extractability of drugs from human plasma matrix. Magnesium sulfate was used as the salting‐out reagent. Extracts were diluted and then injected into a reversed phase LC‐MS/MS system directly. One 96‐well plate was extracted with this new approach to evaluate multiple parameters of a good laboratory practice analytical method. Results indicate that the method is rapid, reliable and suitable for regulated bioanalysis. With minimal modification, this approach has been used for high‐throughput good laboratory practice analysis of a number of compounds under development at Abbott. Copyright © 2008 John Wiley & Sons, Ltd.     

Simultaneous determination of pirprofen and its metabolite, the pyrrole derivative, in plasma by high-performance liquid chromatography

A method for the simultaneous determination of pirprofen and its metabolite, the pyrrole derivative, in human plasma is described. The two compounds and the butyric acid analogue of the pyrrole derivative used as internal standard are extracted from plasma with chloroform, then back-extracted into an alkaline buffer. After addition of acid, the aqueous phase is assayed by high-performance liquid chromatography using a fixed-wavelength ultraviolet detector at 254 nm. The limit of quantitation is 0.1 micrograms/ml (0.396 mumol/l for pirprofen and 0.400 mumol/l for the pyrrole derivative).     

An HPLC method for the determination and pharmacokinetic study of lehmannine in rat plasma

A high-performance liquid chromatographic (HPLC) method for determining lehmannine (LMN) in rat plasma was developed for application in the pharmacokinetics study. The plasma was deproteinized with acetonitrile that contained an internal standard and was separated from the aqueous layer by adding sodium chloride. The HPLC assay was carried out using a VP-ODS column at 40 degrees C. The mobile phase was acetonitrile-0.02 mol/L ammonium acetate buffer-triethylamine (35:65:0.04, v/v/v). The flow rate was 1.0 mL/min. The detection wavelength was set at 220 nm. The method was used to determine the concentration-time profiles of LMN in the plasma following oral administration or bolus injection of LMN aqueous solution. The pharmacokinetic parameters of LMN were calculated for the first time by Drug and Statistics 1.0 program.     

The separation of immiscible liquid slugs within plastic microchannels using a metallic hydrophilic sidestream

This paper describes experiments and related modelling on a new method for separating aqueous phase slugs from the surrounding organic matrix phase in segmented two phase flow in a plastic microcapillary film (MCF). Kerosene or paraffin oil was metered through a plastic capillary of 630 microns diameter and aqueous phase slugs were generated within the capillary by the continuous sidestream injection of water. It was found that the resulting aqueous phase slugs formed in the MCF could be subsequently easily separated from the organic phase by piercing the downstream sidewall of the plastic capillary with a hydrophilic metal hypodermic needle to draw off an aqueous sidestream. Optical scrutiny of the phase separation process indicated that two distinct disengagement mechanisms are involved, in which the metal needle tip either remains submerged in the aqueous phase or becomes periodically exposed to the organic phase at certain stages of the segregation process. The separation efficiency, i.e. the degree of residual phase cross-contamination, was determined as a function of both the sidestream needle angle and the depth of needle penetration into the capillary for a given flow rate and phase ratio. It was established that the separation efficiency was very sensitive to the downstream pressure balance between the organic mainstream flow in the plastic capillary and the aqueous sidestream flow through the needle. A mathematical model for the pressure balance conditions was developed by making certain simplifying assumptions and taking the Laplace interfacial pressure into account. The model predictions agreed surprisingly well with the experimental findings, thus providing circumstantial evidence for the validity of the insights into the phase separation mechanism.     

Determination of captopril in human plasma with precolumn derivatization using solid phase extraction and HPLC

A rapid, accurate and sensitive method for the determination of captopril in human plasma was developed by solid phase extraction and high performance liquid chromatography (HPLC), using precolumn derivatization of captopril with chromophore label o-phethaldialdehyde (OPA). The extraction of captopril from human plasma was carried out by an amino propyl cartridge. A 0.01 M solution of HCl in methanol showed the best recovery and was chosen for elution of captopril in cartridge. This methanolic solution was applied to react with aqueous solution of OPA and glycine as a coderivatization reagent. The process of derivatization was completed within 2 min at room temperature. The derivatized captopril was injected into a reverse phase HPLC system. Mobile phase was consisted of water:acetonitrile:trifluoroacetic acid (85:15:0.1 v/v/v) with a flow rate of 1 ml min^?1 and detector was used at 345 nm. Linear dynamic range and limit of detection were found as 0.1–6 ppm and 0.1 ppm, respectively.     

Atom transfer radical polymerization of styrene in toluene/water mixtures

The atom transfer radical polymerization (ATRP) of styrene in water/toluene mixtures was studied. A linear dependence of the molecular weight on conversion was observed, but the initiation efficiency decreased when the catalyst concentration increased. The variation of the amount of water in the system affected the control of the ATRP, indicating that the presence of the aqueous phase influenced the concentration of copper halides in the organic phase. The partitioning of copper halides resulted in almost complete migration of Cu^II into the aqueous phase, which assisted with catalyst removal after polymerization. For example, the amount of residual copper in the organic phase determined by inductively coupled plasma was less than 1 ppm when the polymerization mixture was exposed to air for 30 min. The ATRP of styrene in water/toluene mixtures occurred with the preservation of Br at the polymer chain end, as confirmed by successful block copolymerization. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 3153–3160, 2002     

Microcolumn liquid chromatography with inductively-coupled plasma atomic emission spectronometric detection

Summary An ICP detector is described which is compatible with microcolumn liquid chromatography. The total column effluent is concentrically nebulized and aspirated into a plasma flame. The carbon compounds are selectively detected by monitoring the characteristic emission line at 247.9 nm using water or aqueous solutions as the mobile phase. The detection limit for carbon is 500 ng or less, and the response is linear over at least two decades. The potential of this system is illustrated by a few applications.     

Simultaneous determination of chloroquine, amodiaquine and their metabolites in human plasma, red blood cells, whole blood and urine by column liquid chromatography

A column liquid chromatographic method for the simultaneous determination of chloroquine, amodiaquine and their monodesethyl metabolite in human plasma, red blood cells, whole blood and urine is described. The drugs and internal standard were extracted as bases with methylene dichloride and then re-extracted into an acid aqueous phase. Separation was obtained using a reversed-phase column and a mobile phase of phosphate buffer (pH 3.0)-acetonitrile (88:12). The absorbance of the drugs was monitored at 340 nm with a sensitivity limit of 10 pmol/ml. No endogenous compound interfered at this wavelength. The mean overall recovery from each biological fluid was greater than 75%. This method can be applied to therapeutic, pharmacokinetic and epidemiological studies. The metabolism of these two amino-4-quinolines in humans is compared.     

Selective determination of famotidine in human plasma by high performance liquid chromatography in alkaline media with solid phase extraction

A new method is described for the determination of famotidine by solid phase extraction from alkalinized human plasma followed by reversed phase (RP) HPLC in acetonitrile/alkaline buffer with molsidomine as an internal standard. Different acetonitrile/aqueous buffer mobile phases as well as various RP columns were used. Alkaline medium allowed the limit of quantitation to be lowered to 5 ng/mL of plasma as the famotidine gives more intense absorption at about 286 nm (at pH values higher than 7). Moreover, work in alkaline media and at this wavelength is highly selective as peaks corresponding to impurities present in most samples are well separated. A method using a mildly alkaline mobile phase (acetonitrile/10 mM phosphate with 10 mM 1‐heptanesulphonic acid, pH 7.5) was successfully used for determination of famotidine in human plasma in a pharmacokinetic study.     

Direct analysis of plasma samples for drug discovery compounds using mixed-function column liquid chromatography tandem mass spectrometry

A sensitive, efficient, high throughput, direct injection bioanalytical method based on a single column and high-performance liquid chromatography (HPLC) with tandem mass spectrometry (MS/MS) was developed for pharmacokinetic analysis of early drug discovery compounds in plasma samples. After mixing with a working solution containing an internal standard each plasma sample was directly injected into a polymer-coated mixed-function column for sample cleanup, enrichment and chromatographic separation. The stationary phase incorporates hydrophilic polyoxyethylene groups and hydrophobic groups to the polymer-coated silica. This allows proteins and macromolecules to pass through the column due to restricted access to the surface of the packing while retaining the drug molecules on the bonded hydrophobic phase. The analytes retained in the column with a largely aqueous liquid mobile phase were then chemically separated by switching to a strong organic mobile phase. The column effluent was diverted from waste to the mass spectrometer for analyte detection. Within 200 plasma sample injections the response ratio (analyte vs. internal standard, %CV = 4.6) and the retention times for analyte and internal standard were found consistent and no column deterioration was observed. The recoveries of test compound in various plasma samples were greater than 90%. The total analysis time was 相似文献   

Determination of Pyridostigmine in Human Plasma by High-Performance Liquid Chromatography

Abstract

An easy to perform, specific, reproducible and sensitive high performance liquid chromatographic (HPLC) method to measure pyridostigmine concentration in human plasma was developed and validated. Sample clean-up consists of ion-pair extraction into dichloromethane in the presence of neostigmine as internal standard, followed by back extraction into an aqueous phase. Mean recovery of 110% (with a standard deviation of 10%) was determined for concentrations of 5 – 100 ng/ml. Chromatography on a 125·4 mm CN-propyl column using a mobile phase composed of 10% acetonitrile in 3.5×10^?4M NaH₂PO₄ and UV detection at 270 nm, yields clean chromatograms without any interferences from endogenous plasma components. Using 1 ml plasma samples the method has a limit of detection (LD) of 3 ng/ml, with %CV (precision) and bias (accuracy) ≥ 10% for concentrations in the range of 0–100 ng/ml. The method is being used in human pharmacokinetic studies of oral dosage forms of pyridostigmine.     

Liquid-liquid-liquid microextraction of aromatic amines from water samples combined with high-performance liquid chromatography

A simple preconcentration and clean-up liquid-liquid-liquid microextraction of aromatic amines is described in this paper. The compounds were extracted from 2.0 ml aqueous samples (donor phase) into an organic phase, layered on the donor phase, and then back extracted to a microdrop of aqueous receiving phase, suspended in the organic phase. After extraction, the microdrop was injected into the HPLC system directly for analysis. Optimal conditions of the extraction were donor phase (a1): 2 ml of water sample adjusted to pH 13 with NaOH-NaCl; organic phase (o), 150 microl ethyl acetate; and receiving phase (a2) of 2 microl aqueous solution at pH 2.1. The a1-->o extraction time was 15 min and for o-->a2, 30 s. 18-Crown-6 ether, which can complex with amine, was added to the aqueous receiving phase to improve the extraction performance. Enrichment factors ranged from 218 (for 4-nitroaniline) to 378 (for 4-chloro-2-aniline). The calibration curve for these anilines was linear within the range 2.5 ng/ml-2.5 microg/ml (r2=0.998). Detection limits ranged from 0.85 to 1.80 ng/mi (at S/N=3). This procedure can be a selective preconcentration method for aromatic amines present in water samples.     

聚合物保护贵金属纳米粒子的相转移技术

依据聚乙烯吡咯烷酮(PVP)在水中的溶解度随温度升高而降低的特性,建立了将PVP保护的金、银、铂纳米粒子从水相转移到油相的简单而有效的相转移技术.方法是利用电化学还原法先于水溶液中制备粒度均匀的金属纳米粒子,然后向电化学合成后的金属纳米水溶胶中加入适量正丁醇,在搅拌条件下升温至80℃即可使金属纳米粒子从水相转移至有机相.纳米粒子的相转移效率很高,而且相转移后粒子在油相中分散很好,没有团聚现象发生.在此基础上进一步建立在油水混合体系电化学合成金属纳米粒子的实验方法,为收集纳米粒子和制备纳米粒子薄膜提供了新的有效途径.     

Quantitation of atorvastatin in human plasma using directly suspended acceptor droplet in liquid-liquid-liquid microextraction and high-performance liquid chromatography-ultraviolet detection

A simple and sensitive methodology based on liquid-liquid-liquid microextraction (LLLME) followed by high-performance liquid chromatography-ultraviolet detection (HPLC-UV) has been successfully developed for the determination of atorvastatin (AT) in human plasma. AT was first extracted from 4.5 mL acidic aqueous sample (diluted plasma, donor phase, pH 1) at temperature 45 °C through 400 μL 1-octanol for 4.5 min, while being agitated by a stirring bar at 1250 rpm. Then, a 5.5 μL free suspended basic aqueous droplet (acceptor phase, pH 10) was delivered to the top-center position of the organic membrane. The mixture was stirred at 650 rpm for 7.5 min and the analyte was back-extracted into the droplet. Finally, the acceptor phase was taken into a microsyringe and injected directly into the HPLC. An enrichment factor of 187 along with substantial sample clean up was obtained under the optimized conditions. The calibration curve showed linearity in the range of 1-500 ng mL⁻¹ with regression coefficient corresponding to 0.996. Limits of detection (S/N = 3) and quantification (S/N = 10) were 0.4 and 1 ng mL⁻¹, respectively. A reasonable relative recovery (91%) and satisfactory intra-assay (4.4-7.0%, n = 6) and inter-assay (4.9-7.7%, n = 8) precision illustrated good performance of the analytical procedure. This technique was eventually applied for the determination of AT in human plasma after oral administration of 40 mg single dose of drug. The protocol proved to be highly cost-effective and reliable for the screening purpose.