Thermal reactions of lithiated graphite anode in LiPF6-based electrolyte

The thermal reactions of a lithiated graphite anode with and without 1.3 M lithium hexafluorophosphate (LiPF₆) in a solvent mixture of ethylene carbonate (EC) and ethylmethyl carbonate (EMC) were investigated by means of differential scanning calorimetry (DSC). The products of the thermal decomposition occurring on the lithiated graphite anode were characterized by Fourier transform infrared (FT-IR) analysis. The lithiated graphite anode showed two broad exothermic peaks at 270 and 325 °C, respectively, in the absence of electrolyte. It was demonstrated that the first peak could be assigned to the thermal reactions of PF₅ with various linear alkyl carbonates in the solid electrolyte interphase (SEI) and that the second peak was closely related to the thermal decomposition of the polyvinylidene fluoride (PVdF) binder. In the presence of electrolyte, the lithiated graphite anode showed the onset of an additional exothermic peak at 90 °C associated with the thermal decomposition reactions of the SEI layer with the organic solvents.     

New insight into the solid electrolyte interphase with use of a focused ion beam

The formation and evolution of the solid electrolyte interphase (SEI) film on the surface of natural graphite spheres in the electrolyte of 1 M LiPF6 in ethylene carbonate (EC) and dimethyl carbonate (DMC) (volume ratio 1:1) were investigated with use of focused ion beam (FIB) technology. Secondary electron FIB images clearly show the surface and cross-section morphology of the SEI film. The composition variation along the surface and cross section of the SEI film was also explored by the elemental line scan analysis (ELSA). The initial SEI film with an apparent thickness range of approximately 450 to approximately 980 nm is rough in morphology and nonuniform in composition, and contains small splits. After certain electrochemical cycles, the thickened SEI film displays microscale holes and obvious cracks on the surface, and the content of organic compounds increases. In addition, the concept of "internal SEI film" is first proposed based on the characterization of the cross section of the natural graphite spheres with the aid of FIB. Finally, the capacity fading mechanisms of the natural graphite spheres corresponding to different electrochemical stages are discussed.     

Investigation of interfacial processes in graphite thin film anodes of lithium-ion batteries by both in situ and ex situ infrared spectroscopy

Graphite thin film anodes with a high IR reflectivity have been prepared by a spin coating method. Both ex situ and in situ microscope FTIR spectroscopy (MFTIRS) in a reflection configuration were employed to investigate interfacial processes of the graphite thin film anodes in lithium-ion batteries. A solid electrolyte interphase layer (SEI layer) was formed on the cycled graphite thin film anode. Ex situ MFTIRS revealed that the main components of the SEI layer on cycled graphite film anodes in 1 mol L -1 LiPF6 /ethylene carbonate + dimethyl carbonate (1:1) are alkyl lithium carbonates (ROCO2 Li). The desolvation process on graphite anodes during the initial intercalation of lithium ion with graphite was also observed and analyzed by in situ MFTIRS.     

Atomic force microscopy study on the stability of a surface film formed on a graphite negative electrode at elevated temperatures

The stability at elevated temperatures of a solid electrolyte interphase (SEI) formed on a graphite negative electrode in lithium ion batteries was investigated by storage tests and in situ atomic force microscopy (AFM) observation. When the fully discharged graphite electrode was stored at elevated temperatures, the irreversible capacity in the following cycle increased remarkably. On the other hand, when the electrode was stored at the fully charged state at elevated temperatures, it was severely self-discharged during storage. AFM observation of the SEI layer formed on a model electrode of highly oriented pyrolytic graphite revealed two important facts on the stability of the SEI at elevated temperatures: (i) dissolution and agglomeration of the SEI layer at the discharged state and (ii) serious SEI growth at the charged state. These phenomena well explain the results of the charge and discharge tests. It was also shown that the addition of vinylene carbonate greatly improves the stability of the SEI at elevated temperatures, and gives good charge and discharge performance after storage.     

Anion receptor for enhanced thermal stability of the graphite anode interface in a Li-ion battery

The thermal stability of the solid electrolyte interphase (SEI) formed on a graphite anode has been enhanced by adding an anion receptor, tris(pentafluorophenyl)borane (TPFPB), to the electrolyte. The investigated electrolyte was LiBF₄ in a 2:1 mixture of ethylene carbonate (EC) and diethyl carbonate (DEC). Two concentrations of TPFPB have been investigated, 0.2 and 0.8 M. Galvanostatic cycling and differential scanning calorimetry (DSC) were used to study the effect of TPFPB on the electrochemical performance and thermal stability of graphite anodes. The best performance is obtained for a graphite anode cycled in an electrolyte with 0.2 M TPFPB: cyclability is improved, and the onset temperature for the first thermally activated reaction is increased by more than 60 °C up to 140–160 °C. X-ray photoelectron spectroscopy (XPS) has been used to examine the composition of the SEI formed in the different electrolytes; the improved performance for the graphite cycled with 0.2 M TPFPB is attributed to a reduced amount of LiF in the SEI.     

Comparative surface analysis study of the solid electrolyte interphase formation on graphite anodes in lithium‐ion batteries depending on the electrolyte composition

The composition of the solid electrolyte interphase (SEI) on graphite anodes is characterized within a comparative surface analytical study varying systematically the electrolyte composition and the cycling conditions. In particular, the conducting salts lithium hexafluorophosphate and lithium bis(trifluoromethanesulfonyl)imide as well as vinylene carbonate and 1‐fluoroethylene carbonate as different electrolyte additives are compared regarding the SEI formation under different cycling conditions. A comprehensive study using X‐ray photoelectron spectroscopy revealed pronounced differences of the SEI compositions at different aging stages. Both additives significantly influence the SEI composition and are able to prevent from parasitic side reactions as well as from decomposition of the conducting salt lithium hexafluorophosphate. This study suggests a promising approach to improve the SEI properties to enhance long‐term stability of lithium‐ion batteries by changing the electrolyte composition. Copyright © 2016 John Wiley & Sons, Ltd.     

温度对石墨电极性能的影响

运用电化学阻抗谱(EIS)并结合循环伏安法(CV)研究了石墨电极25和60 ℃时在1 mol·L-1 LiPF6-EC(碳酸乙烯酯):DEC(碳酸二乙酯):DMC(碳酸二甲酯)电解液中, 以及60 ℃时在1 mol·L-1 LiPF6-EC:DEC:DMC+5%VC(碳酸亚乙烯酯)电解液中的首次阴极极化过程. 发现高温下(60 ℃)石墨电极在1 mol·L-1 LiPF6-EC:DEC:DMC电解液中可逆循环容量衰减的主要原因在于其表面无法形成稳定的固体电解质相界面(SEI)膜. 实验结果显示, VC添加剂能够增进高温下石墨电极表面SEI膜的稳定性, 进而改进石墨电极的循环性能.     

Monitoring the mechanical properties of the solid electrolyte interphase(SEI) using electrochemical quartz crystal microbalance with dissipation

Stable solid electrolyte interphase(SEI) has been well established to be critical for the reversible operation of Li(ion) batteries,yet our understanding of its mechanical properties currently remains incomplete.Here,we used an electrochemical quartz crystal microbalance combined with dissipation monitoring(EQCM-D) to investigate SEI formation.By quantitatively estimating in-situ,the change in mass,shear modulus,and viscosity of the SEI,we show that the SEI formation in propylene carbonate(PC)-and ethylene carbonate/diethyl carbonate(EC/DEC)-based electrolytes involves the growth of a rigid laye r followed by a viscoelastic layer,whereas a distinct "one-layer" rigid model is applicable to the SEI formulated in tetraethylene glycol dimethyl ether(TEGDME)-based electrolyte.With the continuous formation of the SEI,its shear modulus decreases accompanied by an increase in viscosity.In TEGDME,the lightest/thinnest SEI(mass lower than in PC by a factor of nine) yet having the greatest stiffness(more than five times that in PC) is obtained.We attribute this behavior to differences in the chemical composition of the SEIs,which have been revealed by tracking the mass-change-per-mole-of-electrontransferred using EQCM-D and further confirmed by X-ray photoelectron spectroscopy.     

Effect of sulfolane on the morphology and chemical composition of the solid electrolyte interphase layer in lithium bis(oxalato)borate‐based electrolyte

To discuss the source of sulfolane (SL) in decreasing the interface resistance of Li/mesophase carbon microbeads cell with lithium bis(oxalate)borate (LiBOB)‐based electrolyte, the morphology and the composition of the solid electrolyte interphase (SEI) layer on the surface of carbonaceous anode material have been investigated. Compared with the cell with 0.7 mol l^?1 LiBOB‐ethylene carbonate/ethyl methyl carbonate (EMC) (1 : 1, v/v) electrolyte, the cell with 0.7 mol l^?1 LiBOB‐SL/EMC (1 : 1, v/v) electrolyte shows better film‐forming characteristics in SEM (SEI) spectra. According to the results obtained from Fourier transform infrared spectroscopy, XPS, and density functional theory calculations, SL is reduced to Li₂SO₃ and LiO₂S(CH₂)₈SO₂Li through electrochemical processes, which happens prior to the reduction of either ethylene carbonate or EMC. It is believed that the root of impedance reduction benefits from the rich existence of sulfurous compounds in SEI layer, which are better conductors of Li⁺ ions than analogical carbonates. Copyright © 2013 John Wiley & Sons, Ltd.     

Surface analysis of the solid electrolyte interface formed by additives on graphite electrodes in Li‐ion batteries using XPS,FE‐AES,and XHR‐SEM techniques

We investigate the formation and distribution of the solid electrolyte interface (SEI) layer on a graphite anode with two additives [vinylethylene carbonate (VEC) and vinylene carbonate (VC)] in a formation process using XPS, field emission AES, and extreme high‐resolution SEM (XHR‐SEM) techniques, and we studied what factors play an important role in determining the formation of the SEI layer. The VEC‐derived SEI behaviors (morphology, thickness, compound, and balance over electrode position) on a graphite anode largely depend on the elevated temperature. The VC‐derived SEI layer is mostly formed in the initial charging step, showing simple growth (formation) behavior. It is suggested that the properties of the additives are important for SEI bonding configurations at the nanoscale film surface, and to achieve the stable SEI layer, there appears to be an effective formation process for the additive properties. This research highlights the challenges of developing a stable SEI layer with additives in the formation process for electric vehicle batteries and would make a contribution to the understanding of how formation conditions affect an SEI layer with respect to additive properties. Copyright © 2014 John Wiley & Sons, Ltd.     

Li Plating Regulation on Fast-Charging Graphite Anodes by a Triglyme-LiNO3 Synergistic Electrolyte Additive

Graphite anodes are prone to dangerous Li plating during fast charging, but the difficulty to identify the rate-limiting step has made a challenging to eliminate Li plating thoroughly. Thus, the inherent thinking on inhibiting Li plating needs to be compromised. Herein, an elastic solid electrolyte interphase (SEI) with uniform Li-ion flux is constructed on graphite anode by introducing a triglyme (G3)-LiNO₃ synergistic additive (GLN) to commercial carbonate electrolyte, for realizing a dendrite-free and highly-reversible Li plating under high rates. The cross-linked oligomeric ether and Li₃N particles derived from the GLN greatly improve the stability of the SEI before and after Li plating and facilitate the uniform Li deposition. When 51 % of lithiation capacity is contributed from Li plating, the graphite anode in the electrolyte with 5 vol.% GLN achieved an average 99.6 % Li plating reversibility over 100 cycles. In addition, the 1.2-Ah LiFePO₄ | graphite pouch cell with GLN-added electrolyte stably operated over 150 cycles at 3 C, firmly demonstrating the promise of GLN in commercial Li-ion batteries for fast-charging applications.     

Initial solid electrolyte interphase formation process of graphite anode in LiPF6 electrolyte: an in situ ECSTM investigation

Understanding the structure and formation dynamics of the solid electrolyte interphase (SEI) on the electrode/electrolyte interface is of great importance for lithium ion batteries, as the properties of the SEI remarkably affect the performances of lithium ion batteries such as power capabilities, cycling life, and safety issues. Herein, we report an in situ electrochemical scanning tunnelling microscopy (ECSTM) study of the surface morphology changes of a highly oriented pyrolytic graphite (HOPG) anode during initial lithium uptake in 1 M LiPF(6) dissolved in the solvents of ethylene carbonate plus dimethyl carbonate. The exfoliation of the graphite originating from the step edge occurs when the potential is more negative than 1.5 V vs. Li(+)/Li. Within the range from 0.8 to 0.7 V vs. Li(+)/Li, the growth of clusters on the step edge, the decoration of the terrace with small island-like clusters, and the exfoliation of graphite layers take place on the surface simultaneously. The surface morphology change in the initial lithium uptake process can be recovered when the potential is switched back to 2.0 V. Control experiments indicate that the surface morphology change can be attributed to the electrochemical reduction of solvent molecules. The findings may lead to a better understanding of SEI formation on graphite anodes, optimized electrolyte systems for it, as well as the use of in situ ECSTM for interface studies in lithium ion batteries.     

Microgravimetric and Spectroscopic Analysis of Solid−Electrolyte Interphase Formation in Presence of Additives

Electrochemical quartz crystal microbalance (EQCM) with damping monitoring is applied for real-time analysis of solid−electrolyte interphase (SEI) formation in diphenyl octyl phosphate (DPOP) and vinylene carbonate (VC) modified electrolytes. Fast SEI formation is observed for the DPOP containing electrolyte, whereas slow growth is detected in VC-modified and reference electrolytes. QCM measurements in a dry state show considerable reduction of the mass quantity for DPOP and reference samples and minor mass decrease for the SEI layer formed in the presence of VC. The results indicate that VC enhances SEI stability, whereas the addition of DPOP or no additive results in incorporation of loosely attached species, leadubg to SEI instability. Resonance frequency damping, Δw, and dissipation factor, D, are used for analyzing mechanical properties of the SEI layers. The apparent increase of Δw and D during SEI formation in presence of DPOP suggests a pronounced viscoelasticity of the layer. QCM results are compared with surface morphology and chemical composition, revealing excellent agreement of the applied characterization approaches.     

Spatiotemporal Changes of the Solid Electrolyte Interphase in Lithium‐Ion Batteries Detected by Scanning Electrochemical Microscopy

The solid electrolyte interphase (SEI) in lithium‐ion batteries separates the highly reductive lithiated graphite from reducible electrolyte components. It is critical for the performance, durability, and safe operation of batteries. In situ imaging of the SEI is demonstrated using the feedback mode of scanning electrochemical microscopy (SECM) with 2,5‐di‐tert‐butyl‐1,4‐dimethoxy benzene as mediator. The formation of the SEI is indicated by a decrease of the mediator regeneration rate. Prolonged imaging of the same region revealed fluctuation of the passivating properties on time scales between 2 min and 20 h with an inhomogeneous distribution over the sample. The implications of the approach for in situ assessment of local SEI properties on graphite electrodes are discussed with respect to studying the influence of mechanical stress on SEI reliability and the mode of action of electrolyte additives aiming at improving SEI properties.     

Pre-constructed SEI on graphite-based interface enables long cycle stability for dual ion sodium batteries

Lithium batteries have been widely used in all over the world for its high energy density, long-term cycle stability. While the resources of lithium metal and transition metal are limited, which restrict their applications in the grid energy storage. Dual ion sodium batteries (DISBs) possess higher energy density, especially owning high power density for its higher operating voltage (> 4.5 V). Nevertheless, the poor oxidation tolerance of carbonate electrolyte and the co-intercalation of solvents accompanied with anions are main obstacles to make the DISBs commercialization. Herein, a physical barrier (artificial SEI film) is pre-constructed in the Na||graphite batteries to solve these thorny problems. With the CSMG (covered SEI on modified graphite), batteries deliver higher capacity 40 mAh/g even under the current density of 300 mA/g and the capacity retention maintains very well after 100 cycles at a high operating voltage. Moreover, the function mechanism was revealed by in-situ XRD, demonstrating that the pre-constructed SEI can effectively suppress the irreversible phase transition and exfoliation of graphite, resulting from the co-intercalation of anions. Additionally, the work voltage windows of carbonate electrolyte are significantly broadened by establishing electrode/electrolyte interphase. This method opens up an avenue for the practical application of DISBs on the grid energy storage and other fields.     

In situ AFM studies of SEI formation at a Sn electrode

Early stages of the solid electrolyte interphase (SEI) formation at a tin foil electrode in an ethylene carbonate (EC) based electrolyte were investigated by in situ AFM and cyclic voltammetry (CV) at potentials >0.7 V, i.e., above the potential of Sn–Li alloying. We detected and observed initial steps of the surface film formation at ～2.8 V vs. Li/Li⁺ followed by gradual film morphology changes at potentials 0.7 < U < 2.5 V. The SEI layer undergoes continuous reformation during the following CV cycles between 0.7 and 2.5 V. The surface film on Sn does not effectively prevent the electrolyte reduction and a large fraction of the reaction products dissolve in the electrolyte. The unstable SEI layer on Sn in EC-based electrolytes may compromise the use of tin-based anodes in Li-ion battery systems unless the interfacial chemistry of the electrode and/or electrolyte is modified.     

磷酸三甲酯和碳酸亚乙烯酯对锂离子电池的复合作用

应用循环伏安、交流阻抗、扫描电子显微镜和锂离子电池性能检测装置研究了阻燃添加剂磷酸三甲酯(TMP)和成膜添加剂碳酸亚乙烯酯(VC)对锂离子电池的复合作用.结果表明,复合使用TMP和VC不仅能提高电池的安全性而且能改善电池的循环性能,原因可能是在电池首次充放电过程中VC优先还原,还原产物在负极表面聚合形成良好的SEI膜,有效地制约了因TMP在石墨负极表面的分解而造成负极石墨的脱落,同时提高了SEI膜的稳定性.     

二氟二草酸硼酸锂对LiFePO4/石墨电池高温性能的影响

研究了二氟二草酸硼酸锂(LiODFB)作为锂盐加入到碳酸丙烯酯(PC)+碳酸乙烯酯(EC)+碳酸甲乙酯(EMC)(质量比为1:1:3)混合溶剂中对LiFePO4/石墨电池高温(60 ℃)循环性能的影响. 用线性扫描伏安法(LSV)测试了电解液的电化学窗口. 通过等离子发射光谱(ICP)和能量散射光谱(EDS)对LiFePO4材料高温条件下在不同电解液中的稳定性进行了研究; 并用扫描电镜(SEM)和电化学交流阻抗谱(EIS)分析了石墨负极表面的固体电解液相界面(SEI)膜的热稳定性. 结果表明: 一方面LiODFB基电解液能抑制LiFePO4材料在高温条件下Fe(II)的溶解, 防止溶解的Fe(II)在石墨上还原, 有效地降低电池阻抗; 另一方面, 在LiODFB基电解液中形成的石墨负极表面SEI膜具有更好的热稳定性, 能显著提高LiFePO4/石墨电池的高温循环性能.     

锂离子电池电解液成膜添加剂乙烯基亚硫酸乙烯酯的电化学行为

研究了具有不饱和双键和亚硫酸酯双官能团的乙烯基亚硫酸乙烯酯(VES)作为锂离子电池电解液成膜添加剂对中间相碳微球(CMS)和LiFePO4电极电化学性能的影响. 结果表明: 在1 mol/L LiClO4/PC电解液体系中, 少量的VES (5%)能够在电化学过程中先于PC在CMS表面还原, 形成稳定的SEI膜, 明显抑制PC和溶剂化锂离子共嵌入石墨层间, 改善了电池的循环性能. 此外, 电解液1 mol/L LiClO4/PC＋5%VES (V∶V)在LiFePO4电极中展现出良好的电化学稳定性.     

In situ analysis of interfacial reactions between negative MCMB,lithium electrodes,and gel polymer electrolyte

The interfacial properties of mesocarbon-microbeads (MCMB) and lithium electrodes during charge process in poly (vinylidenefluoride-co-hexafluoropropylene)-based gel electrolyte were investigated by in situ Raman microscopy, in situ Fourier transform-infrared (FTIR) spectroscopic methods, and charge–discharge, electrochemical impedance spectroscopy techniques. For MCMB electrode, the series phase transitions from initial formation of the dilute stage 1 graphite intercalation compound (GIC) to a stage 4 GIC, then through a stage 3 to stage 2, and finally to stage 1 GIC was proved by in situ Raman spectroscopic measurement. The formation of solid electrolyte interface (SEI) films formed on MCMB and metal lithium electrode was studied by in situ reflectance FTIR spectroscopic method. At MCMB electrode surface, the solvent (mostly ethylene carbonate) decomposed during charging process and ROCO₂Li may be the product. ROCO₂Li, ROLi, and Li₂CO₃ were the main composites of SEI film formed on lithium electrode, not on electrodeposited lithium electrode or lithium foil electrode.