FTIR and Ab Initio Studies of Diisopropylsulfoxide and its Solutions

Fourier transform infrared (FTIR) measurements, ab initio quantum chemical calculations at the restricted Hartree–Fock (RHF) level and density functional theory (DFT) calculations have been performed to study molecular interactions in pure diisopropylsulfoxide (DiPSO) and the binary mixtures DiPSO/CCl₄ and DiPSO/water. The optimized molecular geometry, vibrational wavenumbers, dipole moments and several thermodynamic parameters of free DiPSO and DiPSO/water 1:1 complex in the ground state were calculated using the RHF and B3LYP methods with the 6-31G(d) basis set. A fitting procedure has been performed for both SO and CH stretching regions and a detailed spectral interpretation has been done based on the data obtained from ab initio calculations, infrared spectra and band deconvolution analysis.     

Conformational stability, vibrational assignmenents, barriers to internal rotations and ab initio calculations of 2-aminophenol (d 0 and d3)

The Raman (3700-100 cm(-1)) and infrared (4000-400 cm(-1)) spectra of solid 2-aminophenol (2AP) have been recorded. The internal rotation of both OH and NH2 moieties produce ten conformers with either Cs or C1 symmetry. However, the calculated energies as well as the imaginary vibrational frequencies reduce rotational isomerism to five isomers. The molecular geometry has been optimized without any constraints using RHF, MP2 and B3LYP levels of theory at 6-31G(d), 6-311+G(d) and 6-31++G(d,p) basis sets. All calculations predict 1 (cis; OH is directed towards NH2) to be the most stable conformation except RHF/6-31++G(d,p) basis set. The 1 (cis) isomer is found to be more stable than 8 (trans; OH is away from the NH2 moiety and the NH bonds are out-of-plane) by 1.7 kcal/mol (598 cm(-1)) as obtained from MP2/6-31G(d) calculations. Aided by experimental and theoretical vibrational spectra, cis and trans 2AP are coexist in solution but cis isomer is more likely present in the crystalline state. Aided by MP2 and B3LYP frequency calculations, molecular force fields, simulated vibrational spectra utilizing 6-31G(d) basis set as well as normal coordinate analysis, complete vibrational assignments for HOC6H4NH2 and DOC6H4ND2 have been proposed. Furthermore, we carried out potential surface scan, to determine the barriers to internal rotations of NH2 and OH groups. All results are reported herein and compared with similar molecules when appropriate.     

Molecular structure, IR spectra of 2-mercaptobenzothiazole and 2-mercaptobenzoxazole by density functional theory and ab initio Hartree–Fock calculations

Quantum chemistry calculations have been performed using Gaussian03 program to compute optimized geometry, harmonic vibrational frequency along with intensities in IR and Raman spectra and atomic charges at RHF/6-31+G*, B3LYP/6-31+G* and B3LYP/6-31++G* levels for 2-mercaptobenzothiazole (MBT, C₇H₅NS₂) and 2-mercaptobenzoxazole (MBO, C₇H₅NOS) in the ground state. The scaled harmonic vibrational frequencies have been compared with experimental FT-IR and FT-Raman spectra. The results show that the scaled theoretical vibrational frequencies is very good agreement with the experimental values. A detailed interpretation of the infrared and Raman spectra of 2-mercaptobenzothiazole and 2-mercaptobenzoxazole was reported. Comparison of calculated spectra with the experimental spectra provides important information about the ability of the computational method to describe the vibrational modes.     

Fourier transform-infrared and Raman spectra, ab initio calculations and assignments for 6-methyl-4-bromomethylcoumarin

Fourier transform-infrared (4000-400 cm-1) and Raman (3500-50 cm-1) spectral measurements have been made for 6-methyl-4-bromomethylcoumarin. Equilibrium structures, harmonic vibrational frequencies, infrared intensities, and depolarization ratios have been computed at RHF/6-31G* and B3LYP/6-31G* levels of theory. Twisting CH2Br moiety in the geometry optimization leads to the most stable conformer lacking symmetry (C1). This is reflected in the richness of bands in the experimental spectra. A complete assignments of the bands, aided by the ab initio calculations, has been proposed for the 6-methyl-4-bromomethylcoumarin. Due to lack of symmetry, several normal vibrations have been found to be mixed ones.     

The natural atomic orbital point charge model for PM3: Multipole moments and molecular electrostatic potentials

The natural atomic orbital/point (NAO-PC) model originally developed to calculate molecular electrostatic potentials (MEPs) and multiple moments based on the AM1 wave function has been extended to PM3. As for AM1, NAO-PC/PM3 reproduces dipole moments calculated by the standard PM3 method very well. There is also a surprisingly good correlation between experimental and calculated quadrupole moments. The MEPs calculated using PM3/NAO-PC are found to be in better agreement with those given by RHF/6-31G* than those obtained from the PM3 wave function using Coulson charges. On the other hand, the NAO-PC model is often slightly worse then the method implemented in MOPAC-ESP. The MEPs calculated using our model based on the PM3 wave function are often in better agreement with those given by RHF/6-31G* than those obtain with AM1. © 1994 by John Wiley & Sons, Inc.     

FT-IR, FT-Raman spectra and ab initio HF and DFT calculations of 4-N,N'-dimethylamino pyridine

In this work, we will report a combined experimental and theoretical study on molecular and vibrational structure of 4-N,N'-dimethylamino pyridine (4NN'DMAP). The Fourier transform infrared and Fourier transform Raman spectra of 4NN'DMAP was recorded in the solid phase. The optimized geometry was calculated by HF and B3LYP methods with 6-31G(d,p) and 6-311++G(d,p) basis sets. The harmonic vibrational frequencies, infrared intensities and Raman scattering activities of the title compound were performed at same level of theories. The scaled theoretical wavenumber showed very good agreement with the experimental values. The thermodynamic functions of the title compound was also performed at HF/6-31G(d,p) and B3LYP/6-311++G(d,p) level of theories. A detailed interpretation of the infrared and Raman spectra of 4NN'DMAP was reported. The theoretical spectrograms for FT-IR and FT-Raman spectra of the title molecule have been constructed.     

Vibrational spectral investigation of four second order nonlinear optical azobenzene-containing materials: a combination of experimental and density functional theoretical (DFT) study

In this work, four-second order nonlinear optical (NLO) azobenzene-containing materials are studied in-depth by using vibrational spectra and density functional theory (DFT). The Fourier transform infrared (FT-IR) spectra and FT-Raman spectra are recorded in the range of 50-4000 and 100-3600cm(-1), respectively. Meanwhile, the DFT computations are performed at B3LYP/6-31G (d, p) level to derive equilibrium geometry, vibrational wavenumbers and intensities, and first hyperpolarizability, and the scaled theoretical wavenumbers are also shown to be in good agreement with experimental data. The calculated results show that these four azobenzene-containing compounds are good materials and the compound with nitro substituent groups possesses a larger first molecular hyperpolarizability (β) value. Moreover, the simultaneous infrared and Raman activation of R1 group and CC stretching suggest that the charge transfer interaction might occur between the R1 group and phenyl ring, and the HOMO-LUMO gap analysis also supports this viewpoint.     

Fourier transform infrared spectrum, vibrational analysis and structural determinations of the trans-bis(glycine)nickel(II) complex by means of the RHF/6-311G and DFT:B3LYP/6-31G and 6-311G methods

The trans-bis(glycine)nickel(II) complex was synthesized, and the Fourier transform infrared spectra in the regions 4000-370 cm(-1) and 700-30 cm(-1) were measured. Band deconvolution analysis and the second derivative of the infrared spectrum were also performed. The determination of the geometrical structure in the trans position of the glycine ligands around Ni(II) for the trans-bis(glycine)nickel(II) complex as well as the vibrational assignment were assisted by RHF/6-311G and by Density Functional Theory calculations, DFT:B3LYP/6-31G and 6-311G basis sets. A full discussion of the framework vibrational modes was done using as criteria the geometry study of distorted structures generated for the vibrational modes. Incidentally, Normal Coordinate Analysis was carried out for the Ni(N)(2)(O)(2) structural fragment. The calculated DFT spectra in the high- and low-energy regions agree with the observed ones.     

Vibrational spectra and structure of benzil and its 18O- and d10-labelled derivatives: a quantum chemical and experimental study

Geometry and vibrational spectroscopic data of benzil-d0 benzil-d10 and benzil-18O calculated at various levels of theory (RHF/6-31G*, B3LYP/6-31G*, BLYP/6-31G*) are reported. The theoretical results are discussed mainly in terms of the comparisons with infrared (4000-100 cm(-1)) and Raman (4000-50 cm(-1)) spectral data. The calculated isotopic frequency shifts, induced by the 18O- and d10-labeling, are in a good agreement with the measured values. A complete vibrational assignment was made with the help of ab initio force field calculations. The data thus obtained were used for reassigning some vibrational frequencies. The results of the optimized molecular structure obtained on the basis of RHF and the DFT calculations are presented and compared with the experimental X-ray diffraction for the benzil-d0 single crystal. It turns out that the best structural parameters are predicted by the B3LYP/6-31G* method.     

缩胺基脲衍生物HeI PES和电子结构的研究

利用HeI紫外光电子能谱(PES)首次得到一组缩胺基脲衍生物的PES谱图。并利用RHF(6-31G^*^*)计算了它们的电子结构,解析了实验谱,分析和说明与实验电离能所对应的分子轨道的特征。论证了计算结果与实验值间很好的相符关系。并通过实验和计算结果,讨论了这类化合物取代基的影响和为何缺乏生物活性。     

FT-IR, FT-Raman spectra and quantum chemical calculations of 3,4-dimethoxyaniline

In this work, we will report a combined experimental and theoretical study on molecular and vibrational structure of 3,4-dimethoxyaniline (3,4-DMA). The Fourier transform infrared and Fourier transform Raman spectra of 3,4-DMA was recorded in the solid phase. The optimized geometry was calculated by HF and B3LYP methods using 6-31G(d,p) and 6-311++G(d,p) basis sets. The harmonic vibrational frequencies, infrared intensities, Raman scattering activities and the thermodynamic functions of the title compound were performed at and HF/B3LYP/6-311++G(d,p) level of theories. The scaled theoretical wavenumber showed very good agreement with the experimental values. A detailed interpretation of the infrared and Raman spectra of 3,4-DMA was reported. The theoretical spectrograms for IR and Raman spectra of the title molecule have been constructed.     

Comparison of experimental and ab initio HF and DFT vibrational spectra of benzimidazole

In this work, we will report a combined experimental and theoretical study on molecular and vibrational structure of benzimidazole. The laser Raman and Fourier transform infrared spectra of benzimidazole were recorded in the solid phase. The equilibrium geometry, harmonic vibrational frequencies, infrared intensities, Raman scattering activities, depolarization ratios and reduced masses were calculated by HF and density functional B3LYP method with the 6-311G(d,p) basis set. The scaled theoretical wavenumbers showed very good agreement with the experimental values. The thermodynamic functions of the title compound were also performed at HF/6-31G(d,p)/6-311G(d,p) and B3LYP/6-31G(d,p)/6-311G(d,p) levels of theory. A detailed interpretations of the infrared and Raman spectra of benzimidazole is reported. The theoretical spectrograms for FT-IR spectra of the title molecule have been constructed.     

Fourier transform infrared and Raman spectra. Semi empirical AM1 and PM3; MP2/DZV and DFT/B3LYP-6-31G(d) ab initio calculations for dimethylterephthalate (DMT)

Fourier transform infrared and Raman spectra of dimethylterephthalate (DMT), as microcrystalline powder, have been investigated. The vibrational spectra were calculated using the AM1 and PM3 semi empirical procedures, and the M?ller-Plesset (MP2/DZV), and the Becke-Lee, Yang and Parr gradient-corrected correlation functional: B3LYP/6-31G(d) ab initio calculations. On this basis, and assisted with the FT-IR and Raman spectra of the terephthalic acid, an assignment of the vibrational spectra of dimethylterephthalate was proposed. In the calculations, remarkable differences concerning the assignments of the vibrational spectra were noted between the AM1 and PM3 methods. Also, the ab initio procedure shows differences in interpreting the spectra compared with the semi empiric procedures, and among themselves. Calculated geometrical parameters were compared with the experimental values of dimethylterephthalate, diethylterephthalate and terephthalic acid.     

Vibrational spectroscopy investigation using ab initio and density functional theory analysis on the structure of 3-aminobenzotrifluoride

In this work, we will report a combined experimental and theoretical study on molecular and vibrational structure of 3-aminobenzotrifluoride. The FT-Raman and Fourier transform infrared spectra of 3-aminobenzotrifluoride (3ABTF) were recorded in the liquid phase. The equilibrium geometry, harmonic vibrational frequencies, infrared intensities and Raman scattering activities, depolarization ratios, reduced masses were calculated by HF and density functional B3LYP method with the 6-31G(d,p) and 6-311G(d,p) basis sets. The scaled theoretical wavenumbers showed very good agreement with the experimental values. The thermodynamic functions of the title compound were also performed at HF/6-31G(d,p)/6-311G(d,p) and B3LYP/6-31G(d,p)/6-311G(d,p) levels of theory. A detailed interpretations of the infrared and Raman spectra of 3ABTF is reported. The theoretical spectrograms for FT-IR spectra of the title molecule have been constructed.     

Si~2Cl~6分子的内旋转能垒和振动基频的理论研究

用从头算方法HF/6-31G^*^*和密度函方法B3LYP/6-31G^*^*,对Si~2Cl~6分子的平衡几何构型进行优化,优化的结果与实验结果吻合得较好.并用上述两种不同的方法计算Si~2Cl~6分子的内旋转能垒,结果分别为8.786和6.694kJ/mol,其中DFT方法的计算结果与实验结果4.18kJ/mol吻合得较好.对Si~2Cl~6分子的振动基频进行计算.用HF/6-31G^*^*SQM力场所计算的频率理论值与实验值的平均误差为7.3cm^-^1,用B3LYP/6-31G^*^*未标度的力场所计算的频率理论值与实验值的平均误差为6.0cm^-^1.该密度泛函方法(B3LYP/~6-31G^*^*)的理论计算值比用HF/6-31G^*^*标度后的SQM力场计算的频率与实验值(除Si--Si键扭转振动基频之外的11条振动基频)吻合得更好.并给出了Si--Si键扭转振动基频的预测值。     

Gas-phase structure, rotational barrier, and vibrational properties of methyl methanethiosulfonate, CH3SO2SCH3: an experimental and computational study

The molecular structure of methyl methanethiosulfonate, CH3SO2SCH3, has been determined in the gas phase from electron-diffraction data supplemented by ab initio (HF, MP2) and density functional theory (DFT) calculations using 6-31G(d), 6-311++G(d,p), and 6-311G(3df,3pd) basis sets. Both experimental and theoretical data indicate that although both anti and gauche conformers are possible by rotating about the S-S bond, the preferred conformation is gauche. The barrier to internal rotation in the CSSC skeleton has been calculated using the RHF/6-31G(d), MP2/6-31G(d), and B3LYP/6-31G(d) methods as well as MP2 with a 6-31G(3df) basis set on sulfur and 6-31G(d) on C, H, and O. A 6-fold decomposition of the rotational barrier has been performed in terms of a Fourier-type expansion, enabling us to analyze the nature of the potential function, showing that the coefficients V1 and V2 are the dominant terms; V1 is associated with nonbonding interactions, and V2 is associated with hyperconjugative interactions. A natural bond orbital analysis showed that the lone pair --> sigma* hyperconjugative interactions favor the gauche conformation. Furthermore, the infrared spectra for the liquid and solid phases and the Raman spectrum for the liquid have been recorded, and the observed bands have been assigned to the vibrational normal modes. The experimental vibrational data, along with calculated theoretical force constants, were used to define a scaled quantum mechanical force field for the target system that enabled us to estimate the measured frequencies with a final root-mean-square deviation of 6 cm-1.     

An experimental and theoretical study of molecular structure and vibrational spectra of 3- and 4-pyridineboronic acid molecules by density functional theory calculations

The experimental and theoretical vibrational spectra of 3- and 4-pyridineboronic acids (abbreviated as p3 and p4) were studied. The Fourier transform Raman and Fourier transform infrared spectra of p3 and p4 molecules were recorded in the solid phase. The structural and spectroscopic analysis of the p3 and p4 acids were made by using density functional harmonic calculations. Both p3 and p4 only one form was most stable using B3LYP level with the 6-31G(d), 6-31G(d,p), 6-311G(d), 6-311G(d,p) and 6-311++G(d,p) basis sets. Selected experimental bands were assigned based on the scaled theoretical wavenumbers. Finally, geometric parameters, infrared and Raman bands and intensities were compared with experimental data of the molecules.     

Analysis of vibrational spectra of chlorotoluene based on density function theory calculations

The conformational behavior and structural stability of chlorotoluene were investigated by utilizing ab initio calculations with 6-31G* basis set at restricted Hartree-Fock (RHF) and density function theory (DFT) levels. The vibrational frequencies of chlorotoluene were computed at the RHF and DFT levels. Complete vibrational assignments were made on the basis of normal coordinate calculations for stable conformer of the molecule. RHF results without scaled quantum mechanical (SQM) force field procedure considered are in bad agreement with experimental values. Of the five DFT methods, BLYP reproduces the observed fundamental frequencies most satisfactorily with the mean absolute deviation of the non-CH stretching modes less than 10 cm(-1). Two hybrid DFT methods are found to yield frequencies, which are generally higher than the observed fundamental frequencies. When the calculated results are compared with 'experimental' frequencies, B3LYP method is found to be slightly more accurate for C-H stretching modes. The results indicate that BLYP calculation is a very promising approach for understanding the observed spectral features.     

Infrared and ab initio studies of conducting molecules: 2,5-diamino-3,6-dichloro-1,4-benzoquinone

2,5-Diamino-3,6-dichloro-1,4-benzoquinone has been synthesized by modifying the procedure reported in literature. Its IR spectrum has been recorded in the solid phase in the range 4000-400cm(-1). Ab initio calculations have been performed using Gaussian '03 program to compute optimized geometry, harmonic vibrational frequencies along with intensities in IR and Raman spectra and atomic charges at RHF/6-31+G*, B3LYP/6-31+G* and B3LYP/6-311++G** levels. To make vibrational analysis Gaussian View software was used. The optimized molecular structure is found to possess C2h point group symmetry. The observed IR frequencies have been assigned to different modes taking C2h molecular symmetry with the help of pictorial view of normal modes. From the magnitude of the observed frequencies corresponding to the NH2 stretching motions an indication of H-bonding is noticed. From geometrical parameters of the molecule it appears that two parallel sets of conjugated strands are formed in this molecule providing a route to conduct charges. The N-H bonds facing towards chlorine atoms are found to be shorter than those facing towards oxygen atoms indicating the presence of H-bonding between hydrogen atom of an NH2 group and carbonyl (quinoid) oxygen atom.     

Vibrational spectra and ab initio analysis of tert-butyl,trimethylsilyl, and trimethylgermyl derivatives of 3,3-dimethylcyclopropene III. 3,3-Dimethyl-1-(trimethylsilyl)cyclopropene

The experimental Raman and IR vibrational spectra of 3,3-dimethyl-1-(trimethylsilyl)cyclopropene in the liquid phase were recorded. Total geometry optimisation was carried out at the HF/6-31G* level and the HF/6-31G*//HF/6-31G* force field was computed. This force field was corrected by scale factors determined previously (using Pulay's method) for correction of the HF/6-31G*//HF/6-31G* force fields of 3,3-dimethylbutene-1, 1-methyl-, 1,2-dimethyl-, and 3,3-dimethylcyclopropene. The theoretical vibrational frequencies calculated from the scaled quantum mechanical force field and the theoretical intensities obtained from the quantum mechanical calculation were used to construct predicted spectra and to perform the vibrational analysis of the experimental spectra.