The reaction between nitrous oxide and carbon monoxide over magnesium oxide

The title reaction was carried out with the help of the transient response method over MgO. It was concluded that no catalyst reduction occurred over this catalyst and the reaction proceeded through the reaction between adsorbed nitrous oxide and adsorbed carbon monoxide without participation of MgO oxygen.

---

MgO. , - MgO.

     

Calorimetric studies of the properties of Pd/Al2O3 with different metal contents

Hydrogen on Pd/Al₂O₃ catalysts (1,2,4% Pd) is sorbed in three forms with a heat of 152.6–2.1 kJ/mol. Metallic surface of the catalysts has been measured by the amount of adsorbed oxygen, whose adsorption heat varies in the range of 313.7–3.4 kJ/mol. Catalytic activity and selectivity of Pd/Al₂O₃ was studied in isoprene hydrogenation.

---

Pd/Al₂O₃- 152,6–2,1 /. , 313,7–3,4 /. Pd/Al₂O₃ .

     

Alumina as a nickel catalysts support for steam reforming of hydrocarbons

The coking resistance of six alumina supported nickel catalysts in n-butane steam reforming mainly depends on the average size of nickel crystallites. Thus, by using suitable preparative methods, it is possible to produce good, coking resistant nickel catalysts even with Al₂O₃ support.

---

Al₂O₃ -, , . . ., , - Al₂O₃.

     

Influence of water activity on the rate of dihydrogen oxidation by metal complexes in aqueous solutions of electrolytes

Strong interaction of Pt with a TiO₂ support (reductive high-temperature treatment) is shown to increase the catalytic activity due to a decrease in CO coverage of the active Pt surface.

---

, TiO₂- ( ) .

     

On the nature of active centers in catalysts for propylene oxidation to acetone

Acid-base properties of binary tin-oxide catalysts for the oxidation of propylene to acetone have been studied. It has been revealed that active catalysts should have both Brönsted acid- and base centers.

---

- . , .

     

Measurement of adsorption heats of nitrogen on metal nitrides

Adsorption heats q and activation energies of the nitrogen exchange on several metal nitrides have been compared. For the systems capable of changing readily their composition upon varying conditions, the isotope exchange is suggested to be the most reliable method of the determination of q.

---

. , , , .

     

State of components in group IV A metal modified nickel catalysts prepared via decomposition of metal complexes

The dispersity and state of components in (M+Ni)/SiO₂ catalysts (M=Ge, Sn, Pb), prepared via the reduction of anchored complexes, have been studied by chemisorption and electron microscopy. High dispersity of metallic particles (6Å) has been revealed. According to Mössbauer spectroscopy, in (Ni+Sn)/SiO₂ catalysts reduced at 873 K, a partial reduction of Sn to the metallic state is observed.

---

(M+Ni)/SiO₂ ( M=Ge, Sn, Pb), , , - . 873 ° K (Sn+Ni)/SiO₂ , , , 6 Å.

     

Oxidation of carbon monoxide with nitrous oxide over CeO2

With the help of the transient response method and fluorescence spectroscopy, it has been revealed that the title reaction proceeds by the catalyst redox transformation Ce(III)Ce(IV) over CeO₂ in great contrast to previous observations over MgO. , Ce(III)Ce(IV) CeO₂ MgO.     

NMR studies of the interaction between tris-acetylacetonates of Fe(III), Cr(III) and diethyldichloride of Sn (IV)

Paramagnetic relaxation rate of CH₂ protons has been found to be higher than that of CH₃ protons of SnEt₂Cl₂ in the presence of tris-acetylacetonate of Cr(III) in chloroform at 298 K, which supports the specific interactions between these compounds. The revealed ligand exchange between Cr(AA)₃, Fe(AA)₃ and SnEt₂Cl₂ takes place with the equilibrium shifted to the side of initial reactants.

---

, -CH₂ CH₃- SnEt₂Cl₂ - Cr(III) 298 K, . Cr(AA)₃, Fe(AA)₃ SnEt₂Cl₂, .

     

Adsorption microcalorimetric studies of the interaction between oxygen and an industrial ammonia synthesis catalyst

Heats of oxygen adsorption on an industrial Ca-IB type catalyst for ammonia synthesis have been measured at 20°C. Participation of various forms of adsorbed oxygen (adsorption heats of 420 kJ/mol and below 84 kJ/mol) in the formation of a passivating (stabilizing) catalyst layer has been found.

---

CA-IB 20°C. ( 100 / 20 /) () .

     

Thermal analysis — A guide to the optimization of sintering processes

During the sintering of multicomponent disperse systems prepared from mixtures of the components, a variety of solid-state reactions, phase formation or dissolution, and the occurrence of a liquid phase determine the densification and the final microstructure of the material.The results are presented of investigations on the systems WC-Co and Fe-Si, through the simultaneous application of dilatometry, differential thermal analysis and thermogravimetry, coupled with metallographic and microprobe analysis.

---

Zusammenfassung Beim Sintern vielkomponentiger Systeme, die aus Gemischen der Komponenten hergestellt werden, bestimmt eine Vielzahl von Festkörperreaktionen, Neubildung und Auflösung von Phasen und das Auftreten von flüssigen Phasen die Verdichtung und die erreichbare Mikrostruktur des Materials.Ergebnisse der Untersuchung in den Systemen WC-Co und Fe-Si durch kombinierten Einsatz von Dilatometrie, TG-DTA, metallographischen und Mikrosonden-Untersuchungen werden mitgeteilt.

---

, , , . WC- Fe-Si , , .

     

Study of distribution of elements in the depth of V?P?Co catalyst grain

It has been shown that addition of cobalt to a vanadium-phosphorus oxide catalyst increases the P/V molar ratio on the surface, the surface acidity and the selectivity of butane oxidation. It has been established that in the V–P–Co–O catalyst the probability of the removal of phosphorus from the surface is markedly reduced.

---

, , . , V–P–Co–O .

     

Proton donor ability of surface hydroxy groups from the IR spectra of hydrogen-bonded complexes

The influence of the strength of N-bases on the shift of (OH) in hydrogenbonded complexes upon adsorption on the surface of a decationized zeolite, phosphates and aerosil differing in the proton donor ability of surface hydroxy groups has been investigated. It is shown that the acid-base properties of the adsorbent-adsorbate pair produce additive influence on the above frequency shifts. A method for the determination of the proton donor ability of surface hydroxy groups (in terms of pK_a) from the IR spectra of hydrogen-bonded complexes is suggested.

---

- (OH) , , . , - - . ( pK_a) .

     

Simple catalytic mechanism permitting a multiplicity of catalyst steady states

The conditions of the existence of several steady states for a three-step mechanism, viz. a catalytic trigger (consecutive), are discussed.

---

- ().

     

Application of thermal analysis for quantitative nitrogen determination in fertilizers

DSC and DTA techniques have been used to determine nitrogen present in the form of ammonium nitrate in fertilizers. The optimum conditions for the investigations were determined for both techniques. By determining peak area, i.e. the enthalpy of the ammonium nitrate crystal transformation II I, it was possible to determine the nitrogen content in ammonium nitrate and in lime ammonium nitrate by DSC with average deviations of 0.44 and 0.91%,respectively. Using DTA and the enthalpy of the ammonium nitrate crystal transformation IV III, the average deviation of nitrogen determination in lime/ammonium nitrate was 1.09%.

---

Zusammenfassung DSC und DTA wurden zur Bestimmung des in Düngemitteln in Form von Ammoniumnitrat vorliegenden Stickstoffs benutzt. Für beide Techniken wurden die optimalen Untersuchungsbedingungen ermittelt. Durch Bestimmung der Peakfläche, d. h. der Enthalpie der Kristalltransformation II I des Ammoniumnitrats konnte der Stickstoffgehalt in Ammoniumnitrat und in Kalk/Ammoniumnitrat mittels DSC mit mittleren Abweichungen von 0.44 bzw. 0.91% bestimmt werden. Aus der Kristalltransformation IV III des Ammoniumnitrats ergibt sich bei Benutzung der DTA-Methode eine mittlere Abweichung von 1.09% für die Stickstoffbestimmung in Kalk/Ammoniumnitrat.

---

, . . , , (III) , — . , , 0,44 0,91%. IVIII , - 1,09%.

     

Interaction of methanol with hydrogen sulfide in the presence of K2WO4/Al2O3

Kinetic data show that in the presence of K₂WO₄/Al₂O₃, methanethiol is largely produced by the reaction of H₂S with metanol and partly with dimethyl ether. Dimethyl sulfide is formed during the interaction of methanethiol with methanol, of H₂S with dimethyl ether and as a result of methanethiol disproportionation. Methane and carbon oxides are the decomposition products of methanethiol and dimethyl sulfide and of methanol and dimethyl ether, respectively.

---

, K₂WO₄/Al₂O₃ H₂S — . , H₂S . , — .

     

Thermal stability of poly(β-bromostyrene) and copolymers of β-bromostyrene with methyl methacrylate

The thermal stabilities of poly(-bromostyrene), poly-(methyl methacrylate) homopolymers and copolymers of-bromostyrene-methyl methacrylate covering the entire composition range were studied using TG analysis. At each extreme of the composition range, incorporation of comonomer units results in a copolymer more stable than the brominated homopolymer. Maximum stability occurs for compositions of approximately 62 mole percent-bromostyrene. The formation of the anhydride structure among the degradation products leads to the stability of the copolymers.

---

Zusammenfassung Die thermische Stabilität von-Bromstyrol- und Methylmethacrylat-Homopolymeren sowie von sich über den ganzen Zusammensetzungsbereich erstreckenden-Bromstyrol/Methylmethacrylat-Kopolymeren wurde thermogravimetrisch untersucht. An beiden Enden des Zusammensetzungsbereichs führt der Einbau von Komonomereinheiten zu einem Kopolymer, das stabiler als das bromierte Homopolymer ist. Maximale Stabilität wird bei einem Gehalt von etwa 62 Mol-%-Bromstyrol erreicht. Die Bildung der Anhydridstruktur führt zur Stabilität des Kopolymers.

---

/-, - . , . - 62%. .

---

---

Presented at the World Conference of Thermal Analysis, held in Bad Hofgastein (Austria), 1985.     

Comparison of properties of supported organozirconium catalysts containing zirconium ions in different valence states

A comparison of the properties of supported zirconium catalysts containing zirconium ions in different valence states in ethylene polymerization shows that an increase in the proportion of active centers involving Zr(III) ions results in a decreasing molecular weight of the polymer. The catalyst activity is practically unchanged.

---

, , . , , Zr(III) . .

     

Dehydrocyclization of 1-heptene-1-14C over chromia on non-acidic alumina

The dehydrocyclization of 1-heptene-1-¹⁴C has been investigated over a chromia on nonacidic alumina catalyst with the aim of determining the¹⁴C distribution in the ring of the toluene product. As high as 80% of the¹⁴C was consistently found in the methyl position as predicted for direct six-carbon ring formation.

---

1--1-C¹⁴ , , C¹⁴ . 80%- C¹⁴ , .