环聚炔苯和环聚炔吡啶组成的盘状液晶中的电荷转移

用电子转移的半经典模型在量子化学B3LYP/6-31G(d)水平(对单体)和B3LYP/STO-3G水平(对二聚物)对环聚炔苯和环聚炔吡啶组成的盘状液晶体系的电荷转移性质进行了研究. 盘状液晶体系的电荷转移速率主要依赖于重组能和电荷转移矩阵元, 重组能越小, 电荷转移矩阵元越大, 则电荷转移速率常数越大. 计算结果表明, 这些大环化合物比目前广泛研究和应用的苯并菲衍生物组成的液晶有较小的重组能, 所以有更好的电荷转移性质. 计算结果对有效地设计和合成高效的光导材料和载流子输送材料是有帮助的.     

Associative charge transfer reactions. Temperature effects and mechanism of the gas-phase polymerization of propene initiated by a benzene radical cation

In associative charge transfer (ACT) reactions, a core ion activates ligand molecules by partial charge transfer. The activated ligand polymerizes, and the product oligomer takes up the full charge from the core ion. In the present system, benzene(+*) (Bz(+*)) reacts with two propene (Pr) molecules to form a covalently bonded ion, C(6)H(6)(+*) + 2 C(3)H(6) --> C(6)H(12)(+*) + C(6)H(6). The ACT reaction is activated by a partial charge transfer from Bz(+*) to Pr in the complex, and driven to completion by the formation of a covalent bond in the polymerized product. An alternative channel forms a stable association product (Bz.Pr)(+*), with an ACT/association product ratio of 60:40% that is independent of pressure and temperature. In contrast to the Bz(+*)/propene system, ACT polymerization is not observed in the Bz(+*)/ethylene (Et) system since charge transfer in the Bz(+*)(Et) complex is inefficient to activate the reaction. The roles of charge transfer in these complexes are verified by ab initio calculations. The overall reaction of Bz(+*) with Pr follows second-order kinetics with a rate constant of k (304 K) = 2.1 x 10(-12) cm(3) s(-1) and a negative temperature coefficient of k = aT(-5.9) (or an activation energy of -3 kcal/mol). The kinetic behavior is similar to sterically hindered reactions and suggests a [Bz(+*) (Pr)]* activated complex that proceeds to products through a low-entropy transition state. The temperature dependence shows that ACT reactions can reach a unit collision efficiency below 100 K, suggesting that ACT can initiate polymerization in cold astrochemical environments.     

Gas phase hydration of organic ions

In this work, we study the hydration phenomenon on a molecular level in the gas phase where a selected number of water molecules can interact with the organic ion of interest. The stepwise binding energies (DeltaH degrees (n-1,n)) of 1-7 water molecules to the phenyl acetylene cation are determined by equilibrium measurements using an ion mobility drift cell. The stepwise hydration energies DeltaH degrees (n-1,n) are nearly constant at 39.7 +/- 6.3 kJ mol(-1) from n = 1 to 7. The entropy change is larger in the n = 7 step, suggesting cyclic or cage-like water structures. No water addition is observed on the ionized phenyl acetylene trimer consistent with cyclization of the trimer ion to form triphenyl benzene cations C(24)H(18) (+) which are expected to interact weakly with the water molecules due to steric interactions and the delocalization of the charge on the large organic ion. The work demonstrates that hydration studies of organic ions can provide structural information on the organic ions.     

Polymerization of ionized acetylene clusters into covalent bonded ions: evidence for the formation of benzene radical cation

Since the discovery of acetylene and benzene in protoplanetary nebulae under powerful ultraviolet ionizing radiation, efforts have been made to investigate the polymerization of ionized acetylene. Here we report the efficient formation of benzene ions within gas-phase ionized acetylene clusters (C2H2)n+ with n = 3-60. The results from experiments, which use mass-selected ion mobility techniques, indicate that the (C2H2)3+ ion has unusual stability similar to that of the benzene cation; its primary fragment ions are similar to those reported from the benzene cation, and it has a collision cross section of 47.4 A2 in helium at 300 K, similar to the value of 47.9 A2 reported for the benzene cation. In other words, (C2H2)3+ structurally looks like benzene, it has stability similar to that of benzene, it fragments such as benzene, therefore, it must be benzene!     

Isomerization and fragmentation reactions of gaseous phenylarsane radical cations and phenylarsanyl cations. A study by tandem mass spectrometry and theoretical calculations

The unimolecular reactions of radical cations and cations derived from phenylarsane, C6H5AsH2 (1) and dideutero phenylarsane, C6H5AsD2 (1-d2), were investigated by methods of tandem mass spectrometry and theoretical calculations. The mass spectrometric experiments reveal that the molecular ion of phenylarsane, 1*+, exhibits different reactivity at low and high internal excess energy. Only at low internal energy the observed fragmentations are as expected, that is the molecular ion 1*+ decomposes almost exclusively by loss of an H atom. The deuterated derivative 1-d2 with an AsD2 group eliminates selectively a D atom under these conditions. The resulting phenylarsenium ion [C6H5AsH]+, 2+, decomposes rather easily by loss of the As atom to give the benzene radical cation [C6H6]*+ and is therefore of low abundance in the 70 eV EI mass spectrum. At high internal excess energy, the ion 1*+ decomposes very differently either by elimination of an H2 molecule, or by release of the As atom, or by loss of an AsH fragment. Final products of these reactions are either the benzoarsenium ion 4*+, or the benzonium ion [C6H7]+, or the benzene radical cation, [C6H6]*+. As key-steps, these fragmentations contain reductive eliminations from the central As atom under H-H or C-H bond formation. Labeling experiments show that H/D exchange reactions precede these fragmentations and, specifically, that complete positional exchange of the H atoms in 1*+ occurs. Computations at the UMP2/6-311+G(d)//UHF/6-311+G(d) level agree best with the experimental results and suggest: (i) 1*+ rearranges (activation enthalpy of 93 kJ mol(-1)) to a distinctly more stable (DeltaH(r)(298) = -64 kJ mol(-1)) isomer 1 sigma*+ with a structure best represented as a distonic radical cation sigma complex between AsH and benzene. (ii) The six H atoms of the benzene moiety of 1 sigma*+ become equivalent by a fast ring walk of the AsH group. (iii) A reversible isomerization 1+<==>1 sigma*+ scrambles eventually all H atoms over all positions in 1*+. The distonic radical cation 1*+ is predisposed for the elimination of an As atom or an AsH fragment. The calculations are in accordance with the experimentally preferred reactions when the As atom and the AsH fragment are generated in the quartet and triplet state, respectively. Alternatively, 1*(+) undergoes a reductive elimination of H2 from the AsH2 group via a remarkably stable complex of the phenylarsandiyl radical cation, [C6H5As]*+ and an H2 molecule.     

Catalytic Transfer Hydrogenation of Arenes and Heteroarenes

Transfer hydrogenation reactions are of great interest to reduce diverse molecules under mild reaction conditions. To date, this type of reaction has only been successfully applied to alkenes, alkynes and polarized unsaturated compounds such as ketones, imines, pyridines, etc. The reduction of benzene derivatives by transfer hydrogenation has never been described, which is likely due to the high energy barrier required to dearomatize these compounds. In this context, we have developed a catalytic transfer hydrogenation reaction for the reduction of benzene derivatives and heteroarenes to form complex 3-dimensional scaffolds bearing various functional groups at room temperature without needing compressed hydrogen gas.     

Elimination of Benzene from Protonated N-Benzylindoline: Benzyl Cation/Proton Transfer or Direct Proton Transfer?

Collision-induced dissociation (CID) of protonated N-benzylindoline and its derivatives was investigated by electrospray ionization tandem mass spectrometry (ESI-MS/MS). Elimination of benzene was observed besides hydride transfer and electron transfer reactions. D-labeling experiments and accurate mass determinations of the product ions confirm that the external proton is retained in the fragment ion, and the elimination reaction was proposed to be initiated by benzyl cation transfer rather than proton transfer. Benzyl cation transfer from the nitrogen atom to one of the sp²-hybridized carbon atoms in the indoline core is the key step, and subsequent proton transfer reaction leads to the elimination of benzene. Density functional theory (DFT)-based calculations were performed and the computational results also support the benzyl cation/proton transfer mechanism.

Self-assembly behavior of a stimuli-responsive water-soluble [60]fullerene-containing polymer

A novel pH- and temperature-responsive water-soluble [60]fullerene-containing poly[2-(dimethylamino)ethyl methacrylate] (C60-b-PDMAEMA) was synthesized by atom transfer radical polymerization. The pH and temperature dependence of the physical properties of the aqueous C60-b-PDMAEMA solution was studied by potentiometric and conductometric titrations, UV-vis transmittance, and laser light scattering techniques. At low pH and at temperatures ranging from 25 to 55 degrees C, in addition to C60-b-PDMAEMA unimers, micelle-like aggregates are produced in the aqueous solution containing C60 hydrophobic cores and protonated PDMAEMA shells. Only unimeric C60-b-PDMAEMAs are found to exist in solution at high pH and low temperature, where PDMAEMA segments form a charge-transfer complex with C60 molecules. However, C60-b-PDMAEMA precipitates from aqueous solution at temperatures exceeding the lower critical solution temperature of PDMAEMA of approximately 45 degrees C. The pH and temperature stimuli-responsive properties of the [60]fullerene-containing polymer in aqueous solution are completely reversible.     

Ethylene polymerization studies with supported cyclopentadienyl,arene, and allyl chromium catalysts

Highly active catalysts for low pressure ethylene polymerization are formed when chromocene, bis (benzene)- or bis (cumene)-chromium or tris- or bis (allyl)-chromium compounds are deposited on high surface area silica-alumina or silica supports. Each catalyst type shows its own unique behavior in preparation, polymerization, activity, isomerization, and response to hydrogen as a chain transfer agent. The arene chromium compounds require an acidic support (silicaalumina) or thermal aging with silica to form a highly active catalyst. At 90°C polymerization temperature arene chromium catalysts produced high molecular weight polyethylene and showed, in contrast to supported chromocene catalysts, a much lower response to hydrogen as a chain transfer agent. An increase in polymerization temperature caused a significant decrease in polymer molecular weight. Addition of cyclopentadiene to supported bis (cumene)-chromium catalyst led to a new catalyst which showed a chain transfer response to hydrogen typical of a supported chromocene catalyst. Polymerization activity with tris- or bis (allyl)-chromium appears to depend on the divalent chromium content in the catalyst. Changes in the silica dehydration temperature of supported allyl chromium catalyst have a significant effect on the resulting polymer molecular weight. High molecular weight polymers were formed with catalysts that were prepared using silica dehydration temperatures below about 400°C. Dimers, trimers, and oligomers of ethylene were usually formed with catalysts that were prepared on silica dehydrated much above 400°C. The order of activity of the different types of catalysts was chromocene/silica > chromocene/silica-alumina > bis (arene)-chromium/silica-alumina ? allyl chromium/silica.     

Gas phase hydration and deprotonation of the cyclic C3H3+ cation. Solvation by acetonitrile, and comparison with the benzene radical cation

The binding energies of the first 5 H2O molecules to c-C3H3+ were determined by equilibrium measurements. The measured binding energies of the hydrated clusters of 9-12 kcal/mol are typical of carbon-based CH+...X hydrogen bonds. The ion solvation with the more polar CH3CN molecules results in stronger bonds consistent with the increased ion-dipole interaction. Ab initio calculations show that the lowest energy isomer of the c-C3H3+(H2O)4 cluster consists of a cyclic water tetramer interacting with the c-C3H3+ ion, which suggests the presence of orientational restraint of the water molecules consistent with the observed large entropy loss. The c-C3H3+ ion is deprotonated by 3 or more H2O molecules, driven energetically by the association of the solvent molecules to form strongly hydrogen bonded (H2O)nH+ clusters. The kinetics of the associative proton transfer (APT) reaction C3H3+ + nH2O --> (H2O)nH+ + C3H2* exhibits an unusually steep negative temperature coefficient of k = cT(-63+/-4) (or activation energy of -37 +/- 1 kcal mol(-1)). The behavior of the C3H3+/water system is exactly analogous to the benzene+*/water system, suggesting that the mechanism, kinetics and large negative temperature coefficients may be general to multibody APT reactions. These reactions can become fast at low temperatures, allowing ionized polycyclic aromatics to initiate ice formation in cold astrochemical environments.     

Cocrystallization with Acetylene. The 1 : 1 Complex with Benzene: Crystal Growth,X‐Ray Diffraction and Molecular Simulations

The crystal structure of an unusual 1 : 1 molecular complex between benzene and acetylene, two very small and apolar molecules, has been determined by X‐ray‐analysis of crystals grown by first mixing the two liquids under conditions of low temperature and high pressure in a capillary, followed by repeated zone melting to form crystals directly on the goniometer head of a diffractometer. Each acetylene molecule is clamped between two parallel benzene rings, with its molecular axis apparently perpendicular to the benzene planes. Closer inspection of thermal‐motion data from the diffraction experiment suggests that the acetylene molecule undergoes a wobbling, or precession, motion between the two rings so that it is perpendicular to them only in a time‐averaged sense. The results of quantum‐chemical calculations on isolated molecular dimers and trimers support this conclusion. In addition, the calculation of separate coulombic, dispersion, polarization and repulsion contributions to intermolecular bonding reveals that the C? H???π‐bond interaction between acetylene and benzene in a T‐shaped dimer consists of a mixture of coulombic and polarization interactions. In the benzene? acetylene cocrystal, its magnitude is quantitatively comparable with that of other dispersive interactions. 5.4 ns Molecular‐dynamics simulations of the liquid mixture reveal that the two components are persistently miscible, a possible key to the formation of the cocrystal. No structure is, however, observed in the solution during the relatively short simulation time.     

The effect of the linear charge density of carrageenan on the ion binding investigated by differential scanning calorimetry, dc conductivity, and kHz dielectric relaxation

The effect of the linear charge density of natural polyelectrolyte, carrageenan, on the ion binding to carrageenan molecules in relation to the gelation was investigated by using the dielectric relaxation spectroscopy, dc conductivity, optical rotation, and differential scanning calorimetry (DSC). Although carrageenan is an anionic polysaccharide, carrageenan molecules in the helix state at low temperatures can bind not only cation, such as potassium and cesium, but also anion, such as iodide. The dc conductivity steeply decreases just below the coil–helix transition temperature, which indicates the binding of ion to the carrageenan molecules in the helix state due to the increase of the linear charge density compared with that in the coil state. The addition of NaI promotes the helix formation, and prevents from aggregation of helices, which was suggested by the results of the dynamic shear modulus and the DSC, and resulted in an increase of the relaxation amplitude of the lowest frequency relaxation (kHz) attributed to the fluctuation of the tightly bound counter ions along the high charge density region (helix). It is concluded that binding of iodide induces (1) the increase in the amount of tightly bound counterions to carrageenan molecules and (2) the formation of non-aggregated helix.     

Thermal benzene activation by 3d transition metal (Sc-Cu) oxide cations

Considering the importance and complexity of benzene oxidation on mineral oxide aerosol surfaces in the atmosphere,gas-phase 3 d-transition metal oxide cations were used as models of active sites on mineral oxide aerosols to mimic the corresponding reactions.The various cations have been prepared by laser ablation and reacted with benzene in a linear ion trap reactor.Of the 103 systematically investigated cations,39 clusters can oxidize benzene at room temperature.In addition to the adsorption channel,other five types of reaction channels were observed,including dehydrogenation of C6H6,charge exchange,hydrogen atom transfer,oxygen atom transfer,and the formation of C6H5O^+radical,among which the first two pathways are prevale nt and the formation of C6H6O^+cations has not been reported in literature.The insight into the benzene oxidation reactions derived from the gas-phase model systems is helpful to build a detailed picture of oxidative mechanisms of C6H6 and its derivatives over corresponding mineral oxide aerosols.     

Isobutene polymerization using a chelating diborane co-initiator

Lewis acidic diborane 1 (J. Am. Chem. Soc. 1999, 121, 3244-3245) is highly effective for both proton- and cationogen-initiated isobutene polymerization in hydrocarbon media at low temperature. Reactions of diborane 1 with cumyl chloride and cumyl methyl ether were studied by variable-temperature 1H and 19F NMR spectroscopy. At low temperatures stable ion pairs 2a and 2b are formed; at higher temperatures these ion-pairs form phenyl-1,3,3-trimethylindan (3) with concomitant release of HCl to form 1 in the case of 2a or degradation of the anion (2b). Reaction between Ph3C-Cl and diborane 1 resulted in the generation of an ion-pair 4 consisting of the Ph3C cation very weakly associated with the chelated, mu-Cl counteranion as revealed by X-ray crystallography.     

Ion/molecule reactions of cation radicals formed from protonated polypeptides via gas-phase ion/ion electron transfer

Cation radicals formed via gas-phase electron transfer to multiply protonated polypeptides have been found to react with molecular oxygen. Such cation radicals are of interest within the context of electron transfer dissociation, a phenomenon with high utility for the characterization of peptide and protein primary structures. Most of the cation radicals show the attachment of O(2) under room temperature storage conditions in an electrodynamic ion trap. At higher temperatures and under conditions of collisional activation, the oxygen adduct species lose O(2), HO(*), or HO(2)(*), depending upon the identity of the side chain at the radical site. The fragments containing the C-terminus, the so-called z-ions, which are predominantly radical species, engage in reactions with molecular oxygen. This allows for the facile distinction between z-ions and their complementary even-electron c-ion counterparts. Such a capability has utility in protein identification and characterization via mass spectrometry. Intact electron transfer products also show oxygen attachment. Subsequent activation of such adducts show dissociation behavior very similar to that noted for z-ion adducts. These observations indicate that ion/radical reactions can be used to probe the locations of radical sites in the undissociated electron transfer products as well as distinguish between c- and z-type ions.     

Time-resolved molecular beam mass spectrometry of the initial stage of particle formation in an Ar/He/C2H2 plasma

The temporal evolution of the neutral plasma chemistry products in a capacitively coupled plasma from argon/helium/acetylene is followed via molecular beam mass spectrometry with a time resolution of 100 ms. Several chemistry pathways are resolved. (i) The formation of C2nH2 (n = 2-5) molecules proceeds via the following sequence: the production of highly reactive C2H radicals in electron impact dissociation of C2H2 is followed by C2H induced chain polymerization of C2nH2 (n = 1-4). (ii) CnH4 (n = 4, 5, 6) compounds are detected already at an early stage of the discharge excluding polymerization reactions with C2H radical being responsible for their formation. Instead, vinylidene reactions with acetylene or mutual neutralization reactions of ionic species are proposed as sources of their formation. (iii) Surface reactions are identified as the source of C8H6. The measured hydrocarbon molecules represents possible precursors for negative ion formation via dissociative electron attachment reactions and can hence play a crucial role in particle nucleation. On the basis of the comparison of our data with available experimental and modeling results for acetylene plasmas in the literature, we propose C2nH2 (n > 1) molecules as important precursors for negative ion formation.     

Electron transfer in self-assembled orthogonal structures

Two new molecular dyads, comprising pyrromethene (bodipy) and 2,2':6',2"-terpyridine (terpy) subunits, have been synthesized and fully characterized. Absorption and fluorescence spectral profiles are dominated by contributions from the bodipy unit. Zinc(II) cations bind to the vacant terpy ligand to form both 1:1 and 1:2 (cation:ligand) complexes, as evidenced by X-ray structural data, NMR and spectrophotometric titrations. Attachment of the cations is accompanied by a substantial decrease in fluorescence from the bodipy chromophore due to intramolecular electron transfer across the orthogonal structure. At low temperature, nuclear tunneling occurs and the rate of electron transfer is essentially activationless. However, activated electron transfer is seen at higher temperatures and allows calculation of the corresponding reorganization energy and electronic coupling matrix element. In both cases, charge recombination is faster than charge separation.     

Role of hydrogen enrichment on acetylene emission during benzene oxidation

A zero-dimensional model (perfectly-stirred reactor) in conjunction with CHEMKIN II and a scheme resulting from the merging of validated kinetic schemes for the oxidation of benzene were used to investigate the effect of hydrogen addition on the formation-depletion of C₂H₂, which is known as a soot precursor. The current modeling study treats the dependence of acetylene amounts on hydrogen percentage in the fuel mixture, and defines the key reaction mechanisms responsible for the observed reduction in C₂H₂ and consequently in polycyclic aromatic hydrocarbons and soot amounts induced by the hydrogen additive. The main objective of this work was to obtain fundamental understanding of the mechanisms, through which the hydrogen affects the acetylene yields. It was found that, at high temperatures hydrogen/benzene fuel mixtures displayed lower acetylene concentrations compared to the pure benzene fuel, whereas opposite trends were observed at low reaction temperatures.     

Resonance Raman spectroscopic study of cation radicals of aromatic molecules formed in the interlayer of transition-metal exchanged montmorillonites

Resonance Raman spectroscopy has been demonstrated to give important structural information on the reactions of aromatic molecules in the interlayer of transition-metal ion-exchanged montmorillonites. Para-substituted benzenes or 4,4-substituted biphenyls are oxidized to form their cation radicals, which are stabilized in the interlayer of the clay mineral. The oxidative dimerization or polymerization results in the formation of biphenyl type cations and poly-p-phenylene cations from mono-substituted benzenes and benzene, respectively.     

Dissociative protonation and proton transfers: fragmentation of alpha, beta-unsaturated aromatic ketones in mass spectrometry

In mass spectrometry of the alpha,beta-unsaturated aromatic ketones, Ph-CO-CH=CH-Ph', losses of a benzene from the two ends and elimination of a styrene are the three major fragmentation reactions of the protonated molecules. When the ketones are substituted on the right phenyl ring, the electron-donating groups are in favor of losing a styrene to form the benzoyl cation, PhCO(+), whereas the electron-withdrawing groups strongly favor loss of benzene of the left side to form a cinnamoyl cation, Ph'CH=CHCO(+). When the ketones are substituted on the left phenyl ring, the substituent effects on the reactions are reversed. In both cases, the ratios of the two competitive product ions are well-correlated with the sigma p(+) substituent constants. Theoretical calculations indicate that the carbonyl oxygen is the most favorable site for protonation, and the olefinic carbon adjacent to the carbonyl is also favorable especially when a strong electron-releasing group is present on the right phenyl ring. The energy barrier to the interconversion between the ions formed from protonation at these two sites regulates the overall reactions. Transfer of a proton from the carbonyl oxygen to the ipso position on either phenyl ring, which is dissociative, triggers loss of benzene.