Molecular Hydrogels from Bolaform Amino Acid Derivatives: A Structure–Properties Study Based on the Thermodynamics of Gel Solubilization

Insight is provided into the aggregation thermodynamics associated to hydrogel formation by molecular gelators derived from L ‐valine and L ‐isoleucine. Solubility data from NMR measurements are used to extract thermodynamic parameters for the aggregation in water. It is concluded that at room temperature and up to 55 °C, these systems form self‐assembled fibrillar networks in water with quite low or zero enthalpic component, whereas the entropy of the aggregation is favorable. These results are explained by considering that the hydrophobic effect is dominant in the self‐assembly. However, studies by NMR and IR spectroscopy reveal that intermolecular hydrogen bonding is also a key issue in the aggregation process of these molecules in water. The low enthalpy values measured for the self‐assembly process are ascribed to the result of a compensation of the favorable intermolecular hydrogen‐bond formation and the unfavorable enthalpy component of the hydrophobic effect. Additionally, it is shown that by using the hydrophobic character as a design parameter, enthalpy‐controlled hydrogel formation, as opposed to entropy‐controlled hydrogel formation, can be achieved in water if the gelator is polar enough. It is noteworthy that these two types of hydrogels, enthalpy‐versus entropy‐driven hydrogels, present quite different response to temperature changes in properties such as the minimum gelator concentration (mgc) or the rheological moduli. Finally, the presence of a polymorphic transition in a hydrogel upon heating above 70 °C is reported and ascribed to the weakening of the hydrophobic effect upon heating. The new soft polymorphic materials present dramatically different solubility and rheological properties. Altogether these results are aimed to contribute to the rational design of molecular hydrogelators, which could be used for the tailored preparation of this type of soft materials. The reported results could also provide ground for the rationale of different self‐assembly processes in aqueous media.     

Pseudopeptide‐Based Hydrogels Trapping Methylene Blue and Eosin Y

We present herein the preparation of four different hydrogels based on the pseudopeptide gelator Fmoc‐l ‐Phe‐d ‐Oxd‐OH (Fmoc=fluorenylmethyloxycarbonyl), either by changing the gelator concentration or adding graphene oxide (GO) to the water solution. The hydrogels have been analysed by rheological studies that demonstrated that pure hydrogels are slightly stronger compared to GO‐loaded hydrogels. Then the hydrogels efficiency to trap the cationic methylene blue (MB) and anionic eosin Y (EY) dyes has been analyzed. MB is efficiently trapped by both the pure hydrogel and the GO‐loaded hydrogel through π–π interactions and electrostatic interactions. In contrast, the removal of the anionic EY is achieved in less satisfactory yields, due to the unfavourable electrostatic interactions between the dye, the gelator and GO.     

A family of low-molecular-weight hydrogelators based on L-lysine derivatives with a positively charged terminal group

A family of L-lysine-based low-molecular-weight compounds with various positively charged terminals (pyridinium and imidazolium derivatives) was synthesized and its gelation behavior in water was investigated. Most of the compounds can be very easily synthesized in high yields (total yields >90 %), and they function as excellent hydrogelators that form hydrogels below 1 wt %; particularly, N(epsilon)-lauroyl-N(alpha)-[11-(4-tert-butylpyridinium)undecanoyl]-L-lysine ethyl ester (2 c) and N(epsilon)-lauroyl-N(alpha)-[11-(4-phenylpyridinium)undecanoyl]-L-lysine ethyl ester (2 d), which are able to gel water at concentration of only 0.2 wt %. This corresponds to a gelator molecule that entraps more than 20 000 water molecules. All hydrogels are very stable and maintain the gel state for at least 9 months. TEM observations demonstrated that these hydrogelators self-assemble into a nanoscaled fibrous structure; a three-dimensional network is then formed by the entanglement of the nanofibers. An FTIR study in [D(6)]DMSO/D(2)O and in CHCl(3) revealed the existence of intermolecular hydrogen bonding between the amide groups. This was further supported by a (1)H NMR study in [D(6)]DMSO/H(2)O. A luminescence study, in which ANS (1-anilino-8-naphtharenesulfonic acid) was used as a probe, indicated that the hydrogelators self-assemble into nanostructures possessing hydrophobic pockets at a very low concentration. Consequently, it was found that the driving forces for self-assembly into a nanofiber are hydrogel bonding and hydrophobic interactions.     

Strong fluorescence emission induced by supramolecular assembly and gelation: luminescent organogel from nonemissive oxadiazole-based benzene-1,3,5-tricarboxamide gelator

Supramolecular aggregation of a novel nonfluorescent gelator yields highly luminescent organogels in aprotic organic solvents through intermolecular hydrogen bonding, which is a key motif for both self-assembly and photophysical process control.     

Tough and fluorescent hydrogels composed of poly(hydroxyurethane) and poly(stearyl acrylate-co-acrylic acid) with hydrophobic associations and hydrogen bonds as the physical crosslinks

Fluorescent hydrogels have promising applications in biomedical and engineering fields. However, they are usually mechanically weak. Here, we report a fluorescent composite hydrogel with high toughness, which is facilely prepared by solution casting ethanol solution of poly(hydroxyurethane) (PHU) and poly(stearyl acrylate-co-acrylic acid) (P[SA-co-AAc]) followed by swelling the casted film in water. The composite hydrogels with water content of 62–78 wt% possess remarkable mechanical performances, with tensile breaking stress of 0.3–1.1 MPa, breaking strain of 280%–400%, Young's modulus of 0.2–0.7 MPa, and tearing fracture energy of 1250–2630 J/m². The high toughness is attributed to the effective energy dissipation of the network with hydrophobic association of SA units and hydrogen bonds between PHU and P(SA-co-AAc) as the physical crosslinks. The intense aggregation of carbamates and the formation of carbamate clusters through intra- and intermolecular hydrogen bonds endow the composite hydrogel with strong fluorescence. These hydrogels with high toughness and strong fluorescence should find applications in flexible electronics, information display, and biomedical devices.     

The curious case of 12-hydroxystearic acid — the Dr. Jekyll & Mr. Hyde of molecular gelators

A comprehensive review of the features driving self-assembly of 12-hydroxystearic acid (12-HSA), a low-molecular-weight gelator, and its applications in drug delivery and as other soft innovative materials are presented herein. 12-HSA is obtained via hydrogenation of ricinoleic acid naturally found in high concentrations in castor oil. The ability of 12-HSA to self-assemble is associated with the presence, position, and enantiomeric purity of the hydroxy group along the fatty acid chain. The polarity and position of the hydroxyl group facilitates more interaction possibilities leading to its exceptional self-assembly behavior giving rise to fibers, ribbons, and tubes in a variety of solvents. Upon self-assembly, 12-HSA undergoes crystallization resulting in the formation of high aspect ratio fibrillar structures due to noncovalent, intermolecular interactions forming self-spanning, three-dimensional networks (called self-assembled fibrillar networks) in both aqueous and organic solvents. Herein, emphasis is placed on emerging applications of 12-HSA supramolecular assemblies (i.e. responsive aqueous foams, gelled complex fluids, drug delivery systems, hydrogels, organogels, xerogels, and aerogel). The vast literature is compiled associated with 12-HSA self-assembly exploring supramolecular assemblies based on one ambidextrous gelator capable of assembling in aqueous and nonaqueous solvent.     

Formation mechanism of supramolecular hydrogels in the presence of L-phenylalanine derivative as a hydrogelator

A novel chiral hydrogelator, L-phenylalanine derivative can self-assemble in aqueous media at different pH values to form supramolecular hydrogels. The images of the FE-SEM indicate that different aggregates of TC(18)PheBu in morphology were formed, which further lead to the formation of spherical crystallites as observed by polarized optical microscope (POM). The FT-IR spectra of the supramolecular hydrogels reveal that intermolecular hydrogen-bonding and hydrophobic interactions are the driving forces for the self-assembly of TC(18)PheBu. Fluorescence spectra of TC(18)PheBu in aqueous solutions in the presence of pyrene as a probe further confirm the importance of hydrophobic interactions for the self-assembly. The circular dichroism (CD) spectra of TC(18)PheBu in supramolecular hydrogels in the presence of KF indicate that the hydrogen-bonding interaction can be disrupted by fluoride ions, which further confirm the importance of hydrogen bonding for the self-assembly of TC(18)PheBu.     

Spatial Structuring of a Supramolecular Hydrogel by using a Visible‐Light Triggered Catalyst

Spatial control over the self‐assembly of synthetic molecular fibers through the use of light‐switchable catalysts can lead to the controlled formation of micropatterns made up of hydrogel structures. A photochromic switch, capable of reversibly releasing a proton upon irradiation, can act as a catalyst for in situ chemical bond formation between otherwise soluble building blocks, thereby leading to fiber formation and gelation in water. The use of a photoswitchable catalyst allows control over the distribution as well as the mechanical properties of the hydrogel material. By using homemade photomasks, spatially structured hydrogels were formed starting from bulk solutions of small molecule gelator precursors through light‐triggered local catalyst activation.     

Amyloid-like behavior in abiotic, amphiphilic foldamers

Previously, we reported an abiotic amphiphilic foldamer that, upon heating, undergoes an irreversible conformational change to a highly aggregated state (Nguyen, J.Q.; Iverson, B.L. J. Am. Chem. Soc. 1999, 121, 2639-2640.). Herein, we extend this work through the study of a series of structurally related amphiphilic foldamers and present a more refined model of their conformational switching behavior. Prior to heating, all foldamers of the series exhibited spectral characteristics consistent with folding in the pleated, stacked geometry characteristic of this class of foldamer. Following heating at 80 degrees C, three of the four molecules exhibited irreversible aggregation to produce hydrogels. The hydrogels were characterized by rheology measurements, and circular dichroism spectra revealed that hydrogel formation was dependent on highly ordered intermolecular assembly, conceptually analogous to protein amyloid formation. Hydrogel formation had the effect of amplifying the subtle structural differences between molecules, as the three amphiphilic foldamer constitutional isomers that formed hydrogels upon heating displayed significant differences in hydrogel properties. Taking a global view, our results indicate that amyloid-like behavior is not unique to proteins but may be a relatively general property of amphiphilic folding molecules in aqueous solution.     

Thermo-reversibility of the fluorescence enhancement of acridine orange induced by supramolecular self-assembly

Fluorescence enhancement of acridine orange (AO) in supramolecular hydrogels formed by self-assembly of the gelators 3-{[(2R)-2-(octadecylamino)-3-phenylpropanoyl]amino}butyrate (TC₁₈PheBu) and 1,3:2,4-di-O-benzylidene-d-sorbitol (DBS) was investigated by steady-state and varying temperature fluorescence, polarized fluorescence and time-resolved fluorescence techniques. The results showed that the fluorescence intensities of AO in the gels remarkably increased in comparison with AO aqueous solutions, and increased with an increase of the gelator concentrations. The varying temperature fluorescence analysis indicated that fluorescence intensities of AO in the gels decreased upon an increase of temperature, and vice versa. This can be attributed to aggregation and dissociation of the gelators in the systems, since the fluorescence enhancement of AO was induced by self-assembly of the gelators. Polarized fluorescence analysis indicated that the values of anisotropy (r) of AO are significantly higher than that in water. This further confirmed that the three-dimensional network formed by the gelator aggregates constrained the rotation of AO entrapped within the gels, resulting in high values of anisotropy. Time-resolved fluorescence analysis indicated that the rates of fluorescence decay in the gels are lower than that in water. These results reveal thermo-reversibility of the fluorescence enhancement of AO in supramolecular hydrogels.     

New cholesterol-based gelator with orotate unit

A new cholesterol-based gelator with orotate unit (cholesterol orotate) was synthesised. The morphology and structure of the gels were investigated by scanning electron microscopy and powder X-ray diffractions. It is observed that the addition of melamine modulated the supramolecular self-assembly and aggregation mode, which originated from the intermolecular non-covalent interactions, as revealed by FT-IR and UV–vis absorption spectra.     

Thermoreversible gelation on cooling and on heating of an aqueous gelatin–poly(N-isopropylacrylamide) conjugate

A polymer conjugate composed of 43 wt% gelatin and 57 wt% poly(N-isopropylacrylamide) (PNIPAAm) was prepared. The dynamic viscoelastic properties of an aqueous solution of the conjugate at the concentration of 5 wt% were examined. The solution was viscous fluid at 30°C and turned into an elastic homogeneous hydrogel upon heating above 34°C or upon cooling below 10°C. The resultant hydrogels turned back into a solution at the opposite temperature cycles of the gelation. It is considered that the driving force of the gelation is the intermolecular hydrophobic interaction of PNIPAAm blocks or the intermolecular helix association of gelatin blocks, respectively, on heating or on cooling. © 1998 John Wiley & Sons, Ltd.     

Magnetically responsive hydrophobic pockets for on–off drug release

The vast majority of drugs available on the market are hydrophobic compounds. As a result, their poor water solubility can critically compromise the overall absorption of these drugs by patients. Although numerous different strategies have been developed to improve their bioavailability, the controlled delivery of these drugs is still a challenge. In this sense, stimuli-responsive hydrogels could be a solution to improve administration and stable release. However, the strategies required to render hydrogels hydrophobic mostly rely on weak hydrophobic interactions, which can lead to disassembly of the system and undesired burst discharge. Accordingly, the on-demand release of poorly water-soluble drugs is still a major milestone in this field. To circumvent these setbacks, we present for the first time a hydrophobic, magnetically responsive hydrogel based on the diaminotriazine (DAT) skeleton. The versatility of DATs in terms of H-bond formation and metal complexation simultaneously endows the hydrogel with hydrophobicity and magnetic responsiveness, thus allowing both the efficient loading and on–off release of a model hydrophobic drug as well as of a hydrophobic bioactive substance. Theoretical calculations further suggested stable formation of DAT aggregates that operate as efficient hydrophobic cavities or ‘pockets’ for these compounds. Moreover, these materials were found to be suitable for enhancing the viability and growth of cell lines often used as in vitro models of neuronal function and differentiation. The present magnetic hydrogels hold interesting potential for tissue engineering as biocompatible scaffolds for the on-demand release of hydrophobic compounds, which remains the focus of current research efforts.     

Thermoresponsive amphiphilic symmetrical triblock copolymers with a hydrophilic middle block made of poly(N-isopropylacrylamide): synthesis, self-organization, and hydrogel formation

Several series of symmetrical triblock copolymers were synthesized by the reversible addition fragmentation chain transfer method. They consist of a long block of poly(N-isopropylacrylamide) as hydrophilic, thermoresponsive middle block, which is end-capped by two small strongly hydrophobic blocks made from five different vinyl polymers. The association of the amphiphilic polymers was studied in dilute and concentrated aqueous solution. The polymer micelles found at low concentrations form hydrogels at high concentrations, typically above 30–35 wt.%. Hydrogel formation and the thermosensitive rheological behavior were studied exemplarily for copolymers with hydrophobic blocks of polystyrene, poly(2-ethylhexyl acrylate), and poly(n-octadecyl acrylate). All systems exhibited a cloud point around 30 °C. Heating beyond the cloud point initially favors hydrogel formation but continued heating results in macroscopic phase separation. The rheological behavior suggests that the copolymers associate into flower-like micelles, with only a small share of polymers that bridge the micelles and act as physical cross-linkers, even at high concentrations.     

Rational Design of Heat‐Set and Specific‐Ion‐Responsive Supramolecular Hydrogels Based on the Hofmeister Effect

Smart supramolecular hydrogels have been prepared from a bolaamphiphilic L ‐valine derivative in aqueous solutions of different salts. The hydrogels respond selectively to different ions and are either reinforced or weakened. In one case, in contrast to conventional systems, the hydrogels are formed upon heating of the system. The use of the hydrogels in the controlled release of an entrapped dye is described as a proof of the potential applications of these systems. The responsive hydrogels were rationally designed by taking into account the noticeable effect of different ions from the Hofmeister series in the solubility of the hydrogelator, which was assessed by using NMR experiments. On the one hand, kosmotropic anions such as sulfate produce a remarkable solubility decrease in the gelator, which is associated with gel reinforcement, as measured by rheological experiments. On the other hand, chaotropic species such as perchlorate weaken the gel. A dramatic effect was observed in the presence of guanidinium chloride, which boosted the solubility of the gelator, in accordance with its chaotropic behaviour reported in protein science. In this case, a direct interaction of the guanidinium species with the carbonyl groups of the hydrogelator is detected by ¹³C NMR spectroscopy. The weakening of this interaction upon a temperature increase allows for the preparation of heat‐set hydrogelating systems.     

Light-Responsive Arylazopyrazole Gelators: From Organic to Aqueous Media and from Supramolecular to Dynamic Covalent Chemistry

Versatile photoresponsive gels based on tripodal low molecular weight gelators (LMWGs) are reported. A cyclohexane-1,3,5-tricarboxamide (CTA) core provides face-to-face hydrogen bonding and a planar conformation, inducing the self-assembly of supramolecular polymers. The CTA core was substituted with three arylazopyrazole (AAP) arms. AAP is a molecular photoswitch that isomerizes reversibly under alternating UV and green light irradiation. The E isomer of AAP is planar, favoring the self-assembly, whereas the Z isomer has a twisted structure, leading to a disassembly of the supramolecular polymers. By using tailor-made molecular design of the tripodal gelator, light-responsive organogels and hydrogels were obtained. Additionally, in the case of the hydrogels, AAP was coupled to the core through hydrazones, so that the hydrogelator and, hence, the photoresponsive hydrogel could also be assembled and disassembled by using dynamic covalent chemistry.     

Phenylboronic Acid Appended Pyrene‐Based Low‐Molecular‐Weight Injectable Hydrogel: Glucose‐Stimulated Insulin Release

A pyrene‐containing phenylboronic acid (PBA) functionalized low‐molecular‐weight hydrogelator was synthesized with the aim to develop glucose‐sensitive insulin release. The gelator showed the solvent imbibing ability in aqueous buffer solutions of pH values, ranging from 8–12, whereas the sodium salt of the gelator formed a hydrogel at physiological pH 7.4 with a minimum gelation concentration (MGC) of 5 mg mL^?1. The aggregation behavior of this thermoreversible hydrogel was studied by using microscopic and spectroscopic techniques, including transmission electron microscopy, FTIR, UV/Vis, luminescence, and CD spectroscopy. These investigations revealed that hydrogen bonding, π–π stacking, and van der Waals interactions are the key factors for the self‐assembled gelation. The diol‐sensitive PBA part and the pyrene unit in the gelator were judiciously used in fluorimetric sensing of minute amounts of glucose at physiological pH. The morphological change of the gel due to addition of glucose was investigated by scanning electron microscopy, which denoted the glucose‐responsive swelling of the hydrogel. A rheological study indicated the loss of the rigidity of the native gel in the presence of glucose. Hence, the glucose‐induced swelling of the hydrogel was exploited in the controlled release of insulin from the hydrogel. The insulin‐loaded hydrogel showed thixotropic self‐recovery property, which hoisted it as an injectable soft composite. Encouragingly, the gelator was found to be compatible with HeLa cells.     

Reversible stiffening transition in beta-hairpin hydrogels induced by ion complexation

We have previously shown that properly designed lysine and valine-rich peptides undergo a random coil to beta-hairpin transition followed by intermolecular self-assembly into a fibrillar hydrogel network only after the peptide solutions are heated above the intramolecular folding transition temperature. Here we report that these hydrogels also undergo a stiffening transition as they are cooled below a critical temperature only when boric acid is used to buffer the peptide solution. This stiffening transition is characterized by rheology, dynamic light scattering, and small angle neutron scattering. Rheological measurements show that the stiffening transition causes an increase in the hydrogel storage modulus (G') by as much as 1 order of magnitude and is completely reversible on subsequently raising the temperature. Although this reversible transition exhibits rheological properties that are similar to polyol/borax solutions, the underlying mechanism does not involve hydroxyl-borate complexation. The stiffening transition is mainly caused by the interactions between lysine and boric acid/borate anion and is not driven by the changes in the secondary structure of the beta-hairpin peptide. Addition of glucose to boric acid and peptide solution disrupts the stiffening transition due to competitive glucose-borate complexation.     

聚(4-乙酰基丙烯酰乙酸乙酯-co-丙烯酸)水凝胶的溶胀动力学以及温度敏感性研究

通过分子结构设计, 合成了疏水性单体4-乙酰基丙烯酰乙酸乙酯(AAEA), 并以该单体与丙烯酸(AA)进行自由基溶液共聚, 制备了P(AAEA-co-AA)新型温度敏感性水凝胶. AAEA的¹H NMR及FT-IR分析表明, 该单体主要以烯醇式结构存在; P(AAEA-co-AA)的FT-IR分析发现, PAAEA与PAA之间存在较强烈的氢键作用, 使得AAEA烯醇异构体中的C—O伸缩振动吸收峰移向了低波数处. 对冷冻干燥后凝胶的电镜分析发现, 当AAEA用量较高时, 由于凝胶内部分子链段的疏水聚集, 各部分溶胀度以及溶胀速度不均一而使得凝胶表面粗糙不平. 采用DSC对凝胶的体积相转变进行了研究, 结果表明, 该水凝胶的体积相转变温度(VPTT)在48.2至61.8 ℃之间, 并且随着AAEA用量的减小, 凝胶的VPTT逐渐增加. 对该新型温度敏感性水凝胶在去离子水中的溶胀动力学研究发现, 当AAEA用量高于4.6 g时, 凝胶属于Fick凝胶; 反之凝胶则属于非Fick凝胶. 该水凝胶在去离子水中具有良好的温度敏感性, 当外界温度低于VPTT时, 凝胶能保持溶胀状态; 而当外界温度高于VPTT时, 凝胶的平衡溶胀度迅速下降, 表现为温度敏感性. 进一步研究发现, 凝胶组成不仅会影响凝胶的VPTT, 而且会影响凝胶温度敏感性的强弱.     

Synthesis and Viscoelastic Properties of Hydrophobically Modified Hydrogels

Summary: We report the synthesis and characterization of a family of hydrophobically modified hydrogels designed to have an improved fracture resistance. A backbone of poly(acrylic acid) (PAA) was functionalized with double bonds and hydrophobic groups. The functionalized PAA was then crosslinked with a dithiol. The chemical structure of the gels was characterized with a combination of NMR, titration methods and rheological techniques. The crosslinked structure of the hydrogel was found to be dependent on the polymer concentration only, while the dissipative properties of the gel increased strongly at all frequencies, with the introduction of hydrophobic groups which formed reversible associations. We expect these viscoelastic hydrogels to display dramatically different properties from the unmodified hydrogels when stretched and fractured.