A unified intrinsic functional expansion theory for solitary waves

A new theory is developed here for evaluating solitary waves on water, with results of high accuracy uniformly valid for waves of all heights, from the highest wave with a corner crest of 120°down to very low ones of diminishing height. Solutions are sought for the Euler model by employing a unified expansion of the logarithmic hodograph in terms of a set of intrinsic component functions analytically determined to represent all the intrinsic properties of the wave entity from the wave crest to its outskirts. The unknown coefficients in the expansion are determined by minimization of the mean-square error of the solution, with the minimization optimized so as to take as few terms as needed to attain results as high in accuracy as attainable. In this regard, Stokes‘s formula, F^2μπ= tanμπ, relating the wave speed (the Froude number F) and the logarithmic decremen t# of its wave field in the outskirt, is generalized to establish a new criterion requiring (for minimizing solution error) the functional expansion to contain a finite power series in M terms of Stokes‘s basic term (singular in #), such that 2Mμ is just somewhat beyond unity, i.e. 2Mμ≌ 1. This fundamental criterion is fully validated by solutions for waves of various amplitude-to-water depth ratio α= a/h, especially about α≌0.01, at which M = 10by the criterion.In this pursuit, the class of dwarf solitary waves, defined for waves with ≌≤ 0.01, is discovered as a group of problems more challenging than even the highest wave. For the highest wave, a new solution is determined here to give the maximum height αhst = 0.8331990, and speed Fhst = 1.290890, accurate to the last significant figure, which seems to be a new record.     

Evaluation of the dynamic-mechanical properties of solids from a cooperative model for stress relaxation

For many solid materials the stress relaxation process obeys the universal relationF = – (d/d lnt)_max = (0.1 ± 0.01) ( ₀ — _i ), regardless of the structure of the material. Here denotes the stress,t the time, ₀ the initial stress of the experiment and _i the internal stress. A cooperative model accounting for the similarity in relaxation behaviour between different materials was developed earlier. Since this model has a spectral character, the concepts of linear viscoelasticity are used here to evaluate the corresponding prediction of the dynamic mechanical properties, i.e. the frequency dependence of the storageE () and lossE () moduli. Useful numerical approximations ofE () andE () are also evaluated. It is noted that the universal relation in stress relaxation had a counterpart in the frequency dependence ofE (). The theoretical prediction of the loss factor for high-density polyethylene is compared with experimental results. The agreement is good.     

The value of the critical exponent for reaction-diffusion equations in cones

Let D R ^N be a cone with vertex at the origin i.e., D = (0, )x where S ^N–1 and x D if and only if x = (r, ) with r=¦x¦, . We consider the initial boundary value problem: u _t = u+u ^p in D×(0, T), u=0 on Dx(0, T) with u(x, 0)=u ₀(x) 0. Let ₁ denote the smallest Dirichlet eigenvalue for the Laplace-Beltrami operator on and let ₊ denote the positive root of (+N–2) = ₁. Let p ^* = 1 + 2/(N + ₊). If 1 < p < p ^*, no positive global solution exists. If p>p ^*, positive global solutions do exist. Extensions are given to the same problem for u _t=+¦x¦ u ^p .This research was supported in part by the Air Force Office of Scientific Research under Grant # AFOSR 88-0031 and in part by NSF Grant DMS-8 822 788. The United States Government is authorized to reproduce and distribute reprints for governmental purposes not withstanding any copyright notation therein.     

Chaos and integrability in a nonlinear wave equation

We consider the parametrized family of equations _tt ,u- _xx u-au+u ₂ ² u=O,x(0,L), with Dirichlet boundary conditions. This equation has finite-dimensional invariant manifolds of solutions. Studying the reduced equation to a four-dimensional manifold, we prove the existence of transversal homoclinic orbits to periodic solutions and of invariant sets with chaotic dynamics, provided that =2, 3, 4,.... For =1 we prove the existence of infinitely many first integrals pairwise in involution.     

Flow through a helically coiled annulus

In this paper the flow is studied of an incompressible viscous fluid through a helically coiled annulus, the torsion of its centre line taken into account. It has been shown that the torsion affects the secondary flow and contributes to the azimuthal component of velocity around the centre line. The symmetry of the secondary flow streamlines in the absence of torsion, is destroyed in its presence. Some stream lines penetrate from the upper half to the lower half, and if is further increased, a complete circulation around the centre line is obtained at low values of for all Reynolds numbers for which the analysis of this paper is valid, being the ratio of the torsion of the centre line to its curvature.Nomenclature A =constant - a outer radius of the annulus - b unit binormal vector to C - C helical centre line of the pipe - D rL - g 1000 - K Dean number=Re² - L 1+r sin - M (L ²+ ² r ²)^1/2 - n unit normal vector to C - P, P pressure and nondimensional pressure - p ₀, p pressures of O(1) and O() - Re Reynolds number=aW ₀/ - (r, , s), (r, , s) coordinates and nondimensional coordinates - nonorthogonal unit vectors along the coordinate directions - r ₀ radius of the projection of C - t unit tangent vector to C - V _r, V , V _s velocity components along the nonorthogonal directions - V_r, V, V _s nondimensional velocity components along - W ₀ average velocity in a straight annulus Greek symbols , curvature and nondimensional curvature of C - U, V, W lowest order terms for small in the velocity components along the orthogonal directions t - _r, , _s first approximations to V _r , V, V _s for small - =/=/ - kinematic viscosity - density of the fluid - , torsion and nondimensional torsion of C - , stream function and nondimensional stream function - nondimensional streamfunction for U, V - a inner radius of the annulus After this paper was accepted for publication, a paper entitled On the low-Reynolds number flow in a helical pipe, by C.Y. Wang, has appeared in J. Fluid. Mech., Vol 108, 1981, pp. 185–194. The results in Wangs paper are particular cases of this paper for =0, and are also contained in [9].     

Heat conduction in a cylinder crossed by an electric current with skin effect

The steady periodic temperature distribution in an infinitely long solid cylinder crossed by an alternating current is evaluated. First, the time dependent and non-uniform power generated per unit volume by Joule effect within the cylinder is determined. Then, the dimensionless temperature distribution is obtained by analytical methods in steady periodic regime. Dimensionless tables which yield the amplitude and the phase of temperature oscillations both on the axis and on the surface of copper or nichrome cylindrical electric resistors are presented.

---

Wärmeleitung in einem stromdurchflossenen Zylinder unter Berücksichtigung des Skin-Effektes

Zusammenfassung Es wird die periodische Temperaturverteilung für den eingeschwungenen Zustand in einem unendlich langen, von Wechselstrom durchflossenen Vollzylinder ermittelt. Zuerst erfolgt die Bestimmung der zeitabhängigen, nichgleichförmigen Energiefreisetzung pro Volumeneinheit des Zylinders infolge Joulescher Wärmeentwicklung und anschließend die Ermittlung der quasistationären Temperaturverteilung auf analytischem Wege. Amplitude und Phasenverzögerung der Temperaturschwingungen werden für die Achse und die Oberfläche eines Kupfer- oder Nickelchromzylinders tabellarisch in dimensionsloser Form mitgeteilt.

---

Nomenclature A integration constant introduced in Eq. (2) - ber, bei Thomson functions of order zero - Bi Biot numberhr ₀/ - c speed of light in empty space - c ₁,c ₂ integration constants introduced in Eq. (46) - c _p specific heat at constant pressure - E electric field - E _z component ofE alongz - E time independent part ofE, defined in Eq. (1) - f function ofs and defined in Eq. (11) - g function ofs and defined in Eq. (37) - h convection heat transfer coefficient - H magnetic field - i imaginary uniti=(–1)^1/2 - I electric current - I _eff effective electric currentI _eff=I/2^1/2 - Im imaginary part of a complex number - J _n Bessel function of first kind and ordern - J electric current density - q _g power generated per unit volume - time average of the power generated per unit volume - time averaged power per unit length - r radial coordinate - R electric resistance per unit length - r ₀ radius of the cylinder - Re real part of a complex number - s dimensionless radial coordinates=r/r ₀ - s, s integration variables - t time - T temperature - time averaged temperature - T _f fluid temperature outside the boundary layer - time average of the surface temperature of the cylinder - u, functions ofs, and defined in Eqs. (47) and (48) - W Wronskian - x position vector - x real variable - Y _n Bessel function of second kind and ordern - z unit vector parallel to the axis of the cylinder - z axial coordinate - · modulus of a complex number - equal by definition Greek symbols amplitude of the dimensionless temperature oscillations - electric permittivity - dimensionless temperature defined in Eq. (16) - ₀, ₁, ₂ functions ofs defined in Eq. (22) - thermal conductivity - dimensionless parameter=(2)^1/2 - magnetic permeability - ₀ magnetic permeability of free space - function of defined in Eq. (59) - dimensionless parameter=c _p/() - mass density - electric conductivity - dimensionless time=t - phase of the dimensionless temperature oscillations - function ofs:= ₁+i ₂ - angular frequency - dimensionless parameter=()^1/2 r ₀     

Approximate solutions for drag coefficient of bubbles moving in shear-thinning elastic fluids

The drag coefficient for bubbles with mobile or immobile interface rising in shear-thinning elastic fluids described by an Ellis or a Carreau model is discussed. Approximate solutions based on linearization of the equations of motion are presented for the highly elastic region of flow. These solutions are in reasonably good agreement with the theoretical predictions based on variational principles and with published experimental data. C _D Drag coefficient - E ^* Differential operator [E ^{* 2} = ²/² + (sin/ ²)/(1/sin /)] - El Ellis number - F _D Drag force - K Consistency index in the power-law model for non-Newtonian fluid - n Flow behaviour index in the Carreau and power-law models - P Dimensionless pressure [=(p – p ₀)/₀ (U /R)] - p Pressure - R Bubble radius - Re ₀ Reynolds number [= 2R U /₀] - Re Reynolds number defined for the power-law fluid [= (2R) ⁿ U ^2–n /K] - r Spherical coordinate - t Time - U Terminal velocity of a bubble - u Velocity - Wi Weissenberg number - Ellis model parameter - Rate of deformation - Apparent viscosity - ₀ Zero shear rate viscosity - Infinite shear rate viscosity - Spherical coordinate - Parameter in the Carreau model - ^* Dimensionless time [=/(U /R)] - Dimensionless length [=r/R] - Second invariant of rate of deformation tensors - ^* Dimensionless second invariant of rate of deformation tensors [=/(U /R)²] - Second invariant of stress tensors - ^* Dimensionless second invariant of second invariant of stress tensor [= / ₀ ² (U /R)²] - Fluid density - Shear stress - ^* Dimensionless shear stress [=/ ₀ (U /R)] - _1/2 Ellis model parameter - ₁ ^2/* Dimensionless Ellis model parameter [= _1/2/ ₀(U /R)] - Stream function - ^* Dimensionless stream function [=/U R ²]     

New concepts in relative permeabilities at high capillary numbers for surfactant flooding

Flooding oil reservoirs with surfactant solutions can increase the amount of oil that can be recovered. Macroscopic modelling of the process requires relative permeabilities to be functions of saturation and capillary number. With only limited experimental data, relative permeabilities have usually been assumed to be linear functions of saturation at high capillary numbers. The experimental data is reviewed, some of which suggest that this assumption is not necessarily correct. The basis for the assumption is therefore reviewed and it is concluded that the linear model corresponds to microscopically segregated flow in the porous medium. Based on new but equally plausible complementary assumptions about the flow pattern, a mixed flow model is derived. These models are then shown to be limiting cases of a droplet model which represents the mixing scale within the porous medium and gives a physical basis for interpolating between the models. The models are based on physical concepts of flow in a porous medium and so the approach described here represents a significant improvement in the understanding of high capillary number flow. This is shown by the fact that fewer parameters are needed to describe experimental data.Notation A total cross-sectional area assigned to capillary bundle - A ⁽ⁱ⁾ physical cross-sectional area of tube i - c ⁽ⁱ⁾ ordered configurational label for droplets in tube i - c configuration label for tube i (order not considered) - D defined by Equation (26) - E(...) expectation value with respect to the trinomial distribution - S _r ⁽⁾ fractional flow of phase - k absolute permeability - k _r relative permeability of phase - k _r ⁰ endpoint relative permeability of phase - L capillary tube length in bundle model - m ⁽ⁱ⁾ number of droplets of phase a occupying tube i - n exponent for phase a in Equation (2) - N number of droplets in bundle model - N _c capillary number - p pressure - p(c') probability of configuration c - Q ⁽ⁱ⁾ total volume flow rate in tube i - S saturation of phase - S flowing saturation of phase - S _r residual saturation of phase - S _r ⁽⁾ saturations when fractional flow of phase is 1 in the case of varying residual saturations for three-phase flow ( ) - t _c residence time for droplet configuration c - v ⁽ⁱ⁾ total fluid velocity in bundle tube i - , phase label - p pressure differential across capillary bundle - ⁽ⁱ⁾ tube conductivity defined by Equation (7) - viscosity of phase - interfacial tension - gradient operator - ... average over tube droplet configurations     

A class of hypo-elastic non-elastic materials and their thermodynamics

Thermodynamics is developed for a class of thermo-hypo-elastic materials. It is shown that materials of this class obey the laws of thermodynamics, but are not elastic.

Table of Symbols

Latin Letters A _ijkl tensor-valued function of t _ij appearing in hypo-elastic constitutive relation - B _ijkl another tensor-valued function. See equation (4.2) - B the square of - d _ij rate of deformation tensor - d _ij deviator of rate of deformation - f, k functions of pressure, p - g, h functions of the invariant - p pressure - q _i heat flux vector - s _ij stress deviator - _ij co-rotational derivative of stress deviator - t time - t ₁ t ₂ specific values of time - t _ij stress tensor - t _ij ⁰ a specific value of stress - T Temperature - T ₀ a specific value of temperature - u _i velocity - V(t) a material volume as a function of time, t - V ₀ a material volume at a reference configuration - W work (W = work done in a deformation—section 5) Sript Letters Specific internal energy - Specific Helmholtz free energy - G Specific Gibbs function Greek Letters an invariant of the stress deviator—see eq. (2.4) - _ij kroneker delta - (W = work done in a deformation—section 5) - specific entropy - hypo-elastic potential - hypo-elastic potential - mass density - ₀ mass density in a reference configuration - specific volume = 1/ - a function of p - _ijkl a constant tensor—see eq. (2.5) - –G/ - _ij rate of rotation tensor This work is dedicated to Jerald L. Ericksen, without whose influence it would not have been possible     

Unsteady effects in a thin viscous shock layer near a three-dimensional stagnation point of a body moving with given acceleration and deceleration

An unsteady viscous shock layer near a stagnation point is studied. The Navier-Stokes equations are analyzed in the limit 1, Re₀ , df/dt = ^n-mF(t/^m). The Reynolds number Re₀ is defined in the paper by Eq. (1.3) (df/dt is the velocity of the body with respect to an inertial frame of reference moving with the original steady velocity –V'_t8, ₂ = ( – 1)/( + 1)). Various flow regimes in the case 1, l, n max(2m, m + 1), m 0, where ² = 1/Re₀ are analyzed. Equations are derived that generalize the asymptotic analysis to the case of a viscous unsteady flow of gas in a thin three-dimensional shock layer. The problem of a thin unsteady viscous shock layer near the stagnation point of a body with two curvatures is formulated. Examples of numerical solution are given for different ratios of the principal curvatures of the body, the wall temperature, the parameters of the original steady flow, and the acceleration and deceleration regimes.Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 2, pp. 100–111, March–April, 1981.I thank Yu. D. Shevelev for a fruitful discussion of the work.     

Wall pressure fluctuations of a turbulent separated and reattaching flow affected by an unsteady wake

The spatio-temporal characteristics of the wall-pressure fluctuations in separated and reattaching flows over a backward-facing step were investigated through pressure-velocity joint measurements carried out using multiple-arrayed microphones and split-film probes. A spoke-wheel-type wake generator was installed upstream of the backward-facing step. The flow structure at the effective forcing frequency (St _f=0.2) was found to be well organized in terms of wall pressure spectrum, cross-correlation, wavenumber-frequency spectrum, and wavelet auto-correlation. Introduction of the unsteady wake (St _f=0.2) reduced the reattachment length by 10%. In addition, the unsteady wake enhanced the turbulence intensity near the separation edge and, as a consequence, enhanced the quadrupole sound sources; however, the turbulence intensity near the reattachment region was weakened and the overall flow noise was attenuated. The greater organization of the flow structure induced by the unsteady wake led to a weakening of the dipole sound sources, which are the dominant sound sources in this system. The dipole sound sources generated by wall pressure fluctuations were calculated using Curles integral formula.Abbreviations AR Aspect ratio - SBF Spatial box filtering Roman symbols C _p Wall pressure fluctuation coefficient, p/0.5U ² - H Step height of backward-facing step (mm) - H _s Shape factor (H _s = ^*/) - R _s Distance from acoustic source point to observation point (m) - Re _H Reynolds number, U H/ - St The reduced frequency, fH/U - St _f Normalized forcing frequency by unsteady wake, f _p H/U - T Vortex shedding period (s) - U Free-stream velocity (m/s) - a Speed of sound (m/s) - f Frequency (Hz) - f _p Wake passing frequency (Hz) - k Turbulent kinetic energy (m²/s²) - k _x Streamwise wave number (1/m) - k _z Spanwise wave number (1/m) - l _j Cosine of angle - p Instantaneous wall pressure (Pa) - p _rms Root-mean-square of wall pressure (Pa) - p _SBF Spatial box filtered wall pressure (Pa) - p _d Dipole sound source (Pa) - p _w Conditionally-averaged wall pressure (Pa) - q Dynamic pressure, 0.5U ² (Pa) - r Distance from origin to observation point (mm) - u _c Convection velocity (m/s) - u_max Root-mean-square of streamwise velocity (m/s) - x _R Time-mean reattachment length (mm) Greek symbols _p Forward-flow time fraction - Auto-correlation of pressure at x ₀ - Two-dimensional cross-correlation of pressure with streamwise separation interval , spanwise separation interval , and time delay , at (x ₀, z ₀) - Boundary layer thickness (mm, _99%) - ^* Displacement thickness (mm, ) - _ij Kroneckers delta function - Phase angle (°) - Wavelength (mm) - Momentum thickness (mm, ) - Angle between vertical axis and observation point (°) - Density (kg/m³) - Time delay (s) - Streamwise separation interval (m) - Spanwise separation interval (m) - _p (f; x ₀) Autospectrum of pressure measured at x ₀ (Pa² s) - _pp (, ; x ₀) Streamwise cross spectrum of pressure at x ₀ (Pa² s) - _pp (, , ; x ₀, z ₀) Streamwise and spanwise cross spectrum of pressure at (x ₀, z ₀) (Pa² s) - _pp (kx, ; x ₀) Streamwise wavenumber-frequency spectrum of pressure at x ₀ (Pa² s) - _pp (kx, kz, ; x ₀, z ₀) Two-dimensional wavenumber-frequency spectrum of pressure at (x ₀, z ₀) (Pa² s)     

Uniqueness and the maximum principle for quasilinear elliptic equations with quadratic growth conditions

In this paper, we show that the maximum principle holds for quasilinear elliptic equations with quadratic growth under general structure conditions.Two typical particular cases of our results are the following. On one hand, we prove that the equation (1) {ie77-01} where {ie77-02} and {ie77-03} satisfies the maximum principle for solutions in H ¹()L(), i.e., that two solutions u ₁, u ₂H¹() L() of (1) such that u ₁u₂ on , satisfy u ₁u₂ in . This implies in particular the uniqueness of the solution of (1) in H ₀ ¹ ()L().On the other hand, we prove that the equation (2) {ie77-04} where fH^–1() and g(u)>0, g(0)=0, satisfies the maximum principle for solutions uH¹() such that g(u)¦Du|{²L¹(). Again this implies the uniqueness of the solution of (2) in the class uH ₀ ¹ () with g(u)¦Du|{²L¹().In both cases, the method of proof consists in making a certain change of function u=(v) in equation (1) or (2), and in proving that the transformed equation, which is of the form (3) {ie77-05}satisfies a certain structure condition, which using ((v₁ -v ₂)⁺)ⁿ for some n>0 as a test function, allows us to prove the maximum principle.     

An experimental study of the lateral migration of a droplet in a creeping flow

The distribution of droplets in a plane Hagen-Poiseuille flow of dilute suspensions has been measured by a special LDA technique. This method assumes a well defined relation between the velocity of the droplets and their lateral position in the channel. The measurements have shown that the droplet distribution is non-uniform and depends on the viscosity ratio between the droplets and the carrier liquid. The results have been compared with a theory by Chan and Leal describing the lateral migration of suspended droplets.List of symbols a particle radius, m - d half width of the channel, m - Re flow Reynolds number, = 2 _m · d · /µ - flow velocity, m/s - _m flow velocity at the channel axis, m/s - We Weber number, = 2 _m ^Emphasis>/2 · d · / - x distance from center line (x = 0) of the channel, m - non-dimensional distance from the channel center line, _x ^d - y distance along the channel (y = 0 at channel inlet), m - non-dimensional distance along the channel, = y/2d - non-dimensional, normalized distance along the channel, = · _m · µ/ - interfacial tension, N/m - viscosity ratio of dispersed (droplet) phase to viscosity of continuous phase - µ viscosity of continuous phase, Pa · s - density of continuous phase, kg/m³ - phase density difference, kg/m³ Experiments were performed at Max-Planck-Institut, Göttingen     

Asymptotic behavior of solutions of nonlinear elliptic equations

We study and obtain formulas for the asymptotic behavior as ¦x¦ of C ² solutions of the semilinear equation u=f(x, u), x (*) where is the complement of some ball in ⁿ and f is continuous and nonlinear in u. If, for large x, f is nearly radially symmetric in x, we give conditions under which each positive solution of (*) is asymptotic, as ¦x¦, to some radially symmetric function. Our results can also be useful when f is only bounded above or below by a function which is radially symmetric in x or when the solution oscillates in sign. Examples when f has power-like growth or exponential growth in the variables x and u usefully illustrate our results.     

On a Boundary-Value Problem of Periodic Type for First-Order Linear Functional Differential Equations

We establish unimprovable sufficient conditions for the unique solvability of the boundary-value problem

Eine analytische Näherungslösung für die eingefrorene laminare Grenzschichtströmung eines binären Gemisches

Zusammenfassung Für die eingefrorene laminare Grenzschichtströmung eines teilweise dissoziierten binären Gemisches entlang einer stark gekühlten ebenen Platte wird eine analytische Näherungslösung angegeben. Danach läßt sich die Wandkonzentration als universelle Funktion der Damköhler-Zahl der Oberflächenreaktion angeben. Für das analytisch darstellbare Konzentrationsprofil stellt die Damköhler-Zahl den Formparameter dar. Die Wärmestromdichte an der Wand bestehend aus einem Wärmeleitungs- und einem Diffusionsanteil wird angegeben und diskutiert. Das Verhältnis beider Anteile läßt sich bei gegebenen Randbedingungen als Funktion der Damköhler-Zahl ausdrücken.

---

An analytical approximation for the frozen laminar boundary layer flow of a binary mixture

An analytical approximation is derived for the frozen laminar boundary layer flow of a partially dissociated binary mixture along a strongly cooled flat plate. The concentration at the wall is shown to be a universal function of the Damkohler-number for the wall reaction. The Damkohlernumber also serves as a parameter of shape for the concentration profile which is presented in analytical form. The heat transfer at the wall depending on a conduction and a diffusion flux is derived and discussed. The ratio of these fluxes is expressed as a function of the Damkohler-number if the boundary conditions are known.

---

Formelzeichen A Atom - A₂ Molekül - C Konstante in Gl. (20) - c₁=1/(2C) Konstante in Gl. (35) - c_p spezifische Wärme bei konstantem Druck - D binärer Diffusionskoeffizient - Ec=u ² /(2h_f) Eckert-Zahl - h spezifische Enthalpie - h_t=h+u²/2 totale spezifische Enthalpie - h _A ⁰ spezifische Dissoziationsenthalpie - K_w Reaktionsgeschwindigkeitskonstante der heterogenen Wandreaktion - 1= /( ) Champman-Rubesin-Parameter - Le=Pr/Sc Lewis-Zahl - M Molmasse - p statischer Druck - Pr= c_pf/ Prandtl-Zahl - q_w Wärmestromdichte an der Wand - q_cw, q_dw Wärmeleitungsbzw. Diffusionsanteil der Wärmestromdichte an der Wand - universelle Gaskonstante - R=/(2M_a) individuelle Gaskonstante der molekularen Komponente - Re_x= u x/ Reynolds-Zahl - Sc=/( D) Schmidt-Zahl - T absolute Temperatur - T_d=h _A ⁰ /R charakteristische Dissoziationstemperatur - u, v x- und y-Komponenten der Geschwindigkeit - U=u/u normierte x-Komponente der Geschwindigkeit - x, y Koordinaten parallel und senkrecht zur Platte Griechische Symbole - =A/ Dissoziationsgrad - Grenzschichtdicke - ₂ Impulsverlustdicke - Damköhler-Zahl der Oberflächenreaktion - =T/T normierte Temperatur - =y/ normierter Wandabstand - Wärmeleitfähigkeit - dynamische Viskosität - , ^* Ähnlichkeitskoordinaten - Dichte - Schubspannung Indizes A auf ein Atom bezogen - M auf ein Molekül bezogen - f auf den eingefrorenen Zustand bezogen - w auf die Wand bezogen - auf den Außenrand der Grenzschicht bezogen     

Injection moulding of thermoplastics: Freezing during mould filling

The injection moulding of thermoplastic polymers involves, during mould filling, flows of hot melts into mould networks, the walls of which are so cold that frozen layers form on them. Theoretical analyses of such flows are presented here. Br Brinkman number - c _L polymer melt specific heat capacity - c _S frozen polymer specific heat capacity - e exponential function - erf() error function - Gz Graetz number in thermal entrance region - Gz ^* modified Graetz number in thermal entrance region - Gz overall Graetz number - h channel half-height - h ^* half-height of polymer melt region - H mean heat transfer coefficient - k _L polymer melt thermal conductivity - k _S frozen polymer thermal conductivity - ln( ) natural logarithm function - L length of thermal entrance region in pipe or channel - m viscosity shear rate exponent - M(,,) Kummer function - Nu Nusselt number - p pressure - P pressure drop in thermal entrance region - P _f pressure drop in melt front region - Pe Péclet number - Pr Prandtl number - Q volumetric flow rate - r radial coordinate in pipe - R pipe radius - R ^* radius of polymer melt region - Re Reynolds number - Sf Stefan number - t time - T temperature - T _i inlet polymer melt temperature - T _m melting temperature of polymer - T _w pipe or channel wall temperature - U(,,) Kummer function - u _r radial velocity in pipe - u _x axial velocity in channel - u _y cross-channel velocity - u _z axial velocity in pipe - V melt front velocity - w channel width - x axial coordinate in channel - x _f melt front position in channel - y cross-channel coordinate - z axial coordinate in pipe - z _f melt front position in pipe - () gamma function - dimensionless thickness of frozen polymer layer - _i i-th term (i = 1,2,3) in power series expansion of - dimensionless axial coordinate in pipe - _f dimensionless melt front position in pipe - dimensionless cross-channel coordinate - ^* dimensionless half-height of polymer melt region - dimensionless temperature - _i i-th term (i = 0, 1, 2, 3) in power series expansion of - _i first derivative of _i with respect toø - _i second derivative of _i with respect toø - ^* dimensionless wall temperature - thermal diffusivity ratio - - latent heat of fusion - µ viscosity - µ ^* unit shear rate viscosity - dimensionless axial coordinate in channel - _f dimensionless melt front position in channel - dimensionless pressure drop in thermal entrance region - _f dimensionless pressure drop in melt front region - _L polymer melt density - _s frozen polymer density - dimensionless radial coordinate in pipe - ^* dimensionless radius of polymer melt region - ø dimensionless similarity variable in thermal entrance region - dummy variable - dimensionless contracted axial coordinate in thermal entrance region - dimensionless similarity variable in melt front region - ^* constant     

Heteroclinic orbits in singular systems: A unifying approach

We consider singularly perturbed systems , such that=f(, _o, 0). _o ^m , has a heteroclinic orbitu(t). We construct a bifurcation functionG(, ) such that the singular system has a heteroclinic orbit if and only ifG(, )=0 has a solution=(). We also apply this result to recover some theorems that have been proved using different approaches.     

Flow in porous media III: Deformable media

Stokes flow in a deformable medium is considered in terms of an isotropic, linearly elastic solid matrix. The analysis is restricted to steady forms of the momentum equations and small deformation of the solid phase. Darcy's law can be used to determine the motion of the fluid phase; however, the determination of the Darcy's law permeability tensor represents part of the closure problem in which the position of the fluid-solid interface must be determined.Roman Letters A interfacial area of the- interface contained within the macroscopic system, m² - A interfacial area of the- interface contained within the averaging volume, m² - A _e area of entrances and exits for the-phase contained within the macroscopic system, m² - A ^* interfacial area of the- interface contained within a unit cell, m² - A _e ^* area of entrances and exits for the-phase contained within a unit cell, m² - E Young's modulus for the-phase, N/m² - e i unit base vectors (i = 1, 2, 3) - g gravity vector, m²/s - H height of elastic, porous bed, m - k unit base vector (=e ₃) - characteristic length scale for the-phase, m - L characteristic length scale for volume-averaged quantities, m - n unit normal vector pointing from the-phase toward the-phase (n = -n ) - p pressure in the-phase, N/m² - P p – g·r, N/m² - r ₀ radius of the averaging volume, m - r position vector, m - t time, s - T total stress tensor in the-phase, N/m² - T ⁰ hydrostatic stress tensor for the-phase, N/m² - u displacement vector for the-phase, m - V averaging volume, m₃ - V volume of the-phase contained within the averaging volume, m³ - v velocity vector for the-phase, m/s Greek Letters V /V, volume fraction of the-phase - mass density of the-phase, kg/m³ - shear coefficient of viscosity for the-phase, Nt/m² - first Lamé coefficient for the-phase, N/m² - second Lamé coefficient for the-phase, N/m² - bulk coefficient of viscosity for the-phase, Nt/m² - T –T ⁰ , a deviatoric stress tensor for the-phase, N/m²