Liquid chromatographic determination of iprovalicarb in cabbage and soil

A method was developed for the determination of iprovalicarb, a new carbamic acid-amino acid fungicide, by liquid chromatography with UV detection. The method uses a reversed-phase C18 column with lambdamax at 215 nm and methanol-water (72 + 25, v/v) as the mobile phase. Cabbage head and leaves fortified with iprovalicarb were extracted with acetone. Partitioning of the fungicide into dichloromethane was followed by column cleanup on neutral alumina. Fortified soil samples were extracted with acetonitrile, and the extract was subjected to column cleanup. The average recoveries of iprovalicarb from cabbage head, leaves, and soil were 86.50, 82.0, and 84.3%, respectively, for fortification levels of 1 and 2 microg/g for cabbage head and leaves and 2 and 4 microg/g for soil.     

Pesticide residue analysis of vegetables by gas chromatography with electron-capture detection

A new and original analytical method was developed for the routine analysis of 28 multiclass pesticide residues in vegetables (green pepper, red pepper, and tomato). The extraction was performed with acetone, and the pesticides were partitioned into ethyl acetate-cyclohexane (1 + 1, v/v). Residue levels in vegetables were determined by gas chromatography (GC) with electron-capture detection. Residue identities were confirmed by GC coupled with mass spectrometry in the selected ion monitoring mode. The average recoveries in pepper and tomato obtained for all analytes studied were 67.3 and 123.1%, respectively, with relative standard deviation between 1.8 and 7.0%. The detection limit for the pesticides studied varied from 0.1 to 2.6 microg/kg. The proposed method was applied to the analysis of these compounds in vegetables grown in experimental greenhouses.     

Trace analysis of fungicides in grape juice and wine using glass capillary gas chromatography

The fungicides Bupirimate, Fenarimol, and Vinclozolin were sprayed on Vines. The fruits were harvested 8 and 21 days after the final application and processed to juice and wine. The fungicide residues were determined by filtration of the samples throug XAD-2 after pH adjustment, elution with methylene chloride, and glass capillary gas chromatography with SE-30 as stationary phase. Residue values of the three compounds were reported before and after fermentation. The precision of the analytical method was established by spiking portuguese white wine and spanish grape juice with the three fungicides and Triadimefon. The recoveries were in the range 80%-100%, except for Vinclozolin.     

Application of matrix solid-phase dispersion to the determination of a new generation of fungicides in fruits and vegetables

A method based on matrix solid-phase dispersion (MSPD) and gas chromatography to determine eight fungicides in fruits and vegetables is described. Fungicide residues were identified and quantified using nitrogen-phosphorus detection and electron-capture detection connected in parallel and confirmed by mass spectrometric detection. The method required 0.5 g of sample, C18 bonded silica as dispersant sorbent, silica as clean-up sorbent and ethyl acetate as eluting solvent. Recoveries from spiked orange, apple, tomato, artichoke, carrot and courgette samples ranged from 62 to 102% and relative standard deviations were less than 15% in the concentration range 0.05-10 mg kg(-1). Detection and quantitation limits ranged 3-30 microg kg(-1) and 10-100 microg kg(-1), respectively, with linear calibration curves up to 10 mg kg(-1). The analytical characteristics of MSPD compared very favourably with the results of a classical multiresidue method, which uses ethyl acetate and anhydrous sodium sulphate for the extraction.     

Determination of fungicide residues in white grapes for winemaking by gas chromatography with mass spectrometric detection and assessment of matrix effects

A new analytical method, based on organic solvent extraction with dichloromethane-acetone (75 + 25, v/v) followed by gas chromatography with mass spectrometric detection, is presented for the determination of residues of 10 fungicides in white grapes for vinification. Some of them (cyprodinil, fludioxonil, and pyrimethanil) have been used for only 2-3 years and, therefore, no methods are available in the scientific literature for such a screening. Quality parameters yielded good precision (relative standard deviation of <10%) and detection limits (ranging between 1 and 18 microg/kg) that are lower than the maximum residue limits (MRLs) set by the 76/895/European Economic Community (EEC) and 90/642/EEC Directives. The applicability of the method was evaluated by analysis of 5 different white grapes produced in the Rías Baixas area in Galicia (northwestern Spain) for vinification. The method showed good performance in analyses of real samples to determine whether the concentrations of the fungicides used exceeded their MRLs. The method of standard additions was found to be necessary to avoid matrix effects in the quantification of fungicide residues. Results showed that concentrations of the fungicides identified in grapes were lower than the MRLs established by the European legislation.     

Multiresidue determination of pesticides in honey by matrix solid-phase dispersion and gas chromatography with electron-capture detection

A multiresidue method was developed for the determination of 15 pesticides (organochlorines, organophosphorus compounds, pyrethroids, and other acaricides) in various commercial honeys (eucalyptus, lavender, orange, rosemary, and multifloral). The analytical procedure is based on the matrix solid-phase dispersion of honey in a mixture of Florisil and anhydrous sodium sulfate; the mixture is placed in small plastic columns and extracted with hexane-ethyl acetate (90 + 10, v/v). The pesticide residues are determined by capillary gas chromatography with electron-capture detection. Recoveries with the method at concentrations between 0.15 and 1.5 microg/g ranged from 80 to 113%, and relative standard deviations were <10% for all the pesticides studied. The pesticide detection limits were within the range 0.5-5 microg/kg for organochlorines, around 3 microg/kg for the chlorinated organophosphorus pesticides studied, near 15 microg/kg for fluvalinate, and about 3 microg/kg for the other pyrethroids.     

Determination of imidazole and triazole fungicide residues in honeybees using gas chromatography-mass spectrometry

An analytical method employing clean up by high-performance gel permeation chromatography (HPGPC) and solid-phase extraction (SPE) on Florisil cartridges was developed to determine residues of eleven imidazole and triazole ergosterol-biosynthesis-inhibiting (EBI) fungicides in honeybee samples. Detection was by means of gas chromatography-mass spectrometry (GC-MS) in selected ion monitoring (SIM) mode. The method was validated by fortifying control samples at levels of 0.01 and 0.05 micro g/bee. Mean recoveries for each analyte except imazalil were between 79 and 99% with relative standard deviations of 12.3% or less. Mean recoveries of imazalil were 51% at 0.01 micro g/bee and 81% at 0.05 micro g/bee. Limits of detection for the analytes investigated ranged from 0.005 to 0.001 micro g/bee.     

Determination of organotins in aquatic food by gas chromatography with pulsed flame photometric detection

A method based on gas chromatography (GC)-pulsed flame photometric detection (PFPD) was developed to determine the levels of organotins in aquatic food. After being purified by gel-permeation chromatography in ethyl actate-tetrahydrofuran, the organotin compounds were derivatized by pentylmagnesium bromide. The derivative products were injected into the GC system and detected by PFPD (sulfur mode). The method was validated by analysis of the certified reference material and spiked samples. Recoveries of organotins ranged from 84.1 to 116.6% with relative standard deviation between 1.3 and 16.0% when spiked at levels of 2, 10, and 40 microg/kg. The limits of detection varied from 0.1 to 1.2 microg/kg for shellfish and 0.1 to 0.5 microg/kg for fish. The proposed method was suitable for determining organotins in aquatic foods.     

Development of methods for determination of the residues of 15 pesticides in medicinal herbs Isatis indigotica Fort. by capillary gas chromatography with electron capture or flame photometric detection

Two multiresidue methods were developed for the determination of 15 pesticides (organochlorines, organphosphorus compounds, pyrethroids, and fungicides) in medicinal herbs Isatis indigotica Fort. and its formulations. The analytical procedure is based on ultrasonic assisted extraction and liquid-liquid extraction (LLE). After solvents were added, the raw material or granule sample was sonicated in an ultrasonic water bath and then centrifuged, filtered, and cleaned up by LLE. The infusion sample was extracted with petroleum ether by LLE. The pesticide residues were determined by capillary gas chromatography with electron-capture or flame photometric detection. Recoveries with the method at concentrations between 0.4 microg/kg and 10 mg/kg ranged from 70.2 to 119.5% for raw material, 73.2 to 105.1% for granule formulation, and 72.8 to 113.3% for infusion formulation. The relative standard deviation values were <20% for all of the pesticides studied. The pesticide detection limits were within the ranges 0.3-0.5 microg/L for endosulfan, 3-7.5 microg/L for pyrethroids, 0.7-32.5 microg/L for organophosphorus pesticides, and 0.1-0.6 microg/L for the other pesticides. The proposed methods are simple and rapid and provide simultaneous determination of pesticide residues in Isatis indigotica Fort. with acceptable recoveries and repeatability and an adequate limit of determination.     

Determination of sodium azide in beverages by ion chromatography

A convenient method for determination of sodium azide in beverages using ion chromatography is described. This method combines the specificity for azide with a simple sample preparation using a bubble and trap apparatus that removes any interferences. Sodium azide in a sample was acidified, and the azide was converted to the volatile hydrazoic acid, which was trapped in 2.5 mM sodium hydroxide solution. Determination was performed by isocratic ion chromatography using suppressed conductivity detection. Calibration curves were linear for 0.5 to 20 microg/mL sodium azide and the detection limit was 0.05 microg/mL. Recoveries of sodium azide from spiked samples (10.0 microg/g) were more than 82.6%. The method was then used to analyze various beverages.     

Determination of bisphenol A in sewage effluent and sludge by solid-phase and supercritical fluid extraction and gas chromatography/mass spectrometry

Methods have been developed for the determination of bisphenol A (BPA) residues in municipal sewage and sludge samples. BPA in wastewater samples was enriched with a C18 solid-phase extraction cartridge, eluted with acetone, and converted to the pentafluoropropionyl derivative. For sludge samples, BPA was acetylated and extracted with supercritical carbon dioxide. In both cases, BPA-d16 was used as a surrogate to monitor extraction efficiency. Final analyses of derivatized sample extracts were performed by gas chromatography/mass spectrometry operating in the electron impact mode. For water samples, mean recoveries and standard deviations were 89 +/- 6, 94 +/- 4, and 85 +/- 7% at fortification levels of 1, 0.1, and 0.025 microg/L, respectively, with a method detection limit of 0.006 microg/L. For solid waste samples, mean recoveries and standard deviations were 93 +/- 5 and 92 +/- 6% at fortification levels of 2.5 and 0.25 microg/g, respectively, and the method detection limit was 0.05 microg/g. For the Canadian samples under investigation, concentrations of BPA ranged from 49.9 to 0.031 microg/L in sewage influent and effluent, and from 36.7 to 0.104 microg/g in sludge.     

Determination of pesticides in soil by liquid-phase microextraction and gas chromatography-mass spectrometry

Trace amounts of pesticides in soil were determined by liquid-phase microextraction (LPME) coupled to gas chromatography-mass spectrometry (GC-MS). The technique involved the use of a small amount (3 microl) of organic solvent impregnated in a hollow fiber membrane, which was attached to the needle of a conventional GC syringe. The organic solvent was repeatedly discharged into and withdrawn from the porous polypropylene hollow fiber by a syringe pump, with the pesticides being extracted from a 4 ml aqueous soil sample into the organic solvent within the hollow fiber. Aspects of the developed procedure such as organic solvent selection, extraction time, movement pattern of plunger, concentrations of humic acid and salt, and the proportion of organic solvent in the soil sample, were optimized. Limits of detection (LOD) were between 0.05 and 0.1 microg/g with GC-MS analysis under selected-ion monitoring (SIM). Also, this method provided good precision ranging from 6 to 13%; the relative standard deviations were lower than 10% for most target pesticides (at spiked levels of 0.5 microg/g in aqueous soil sample). Finally, the results were compared to those achieved using solid-phase microextraction (SPME). The results demonstrated that LPME was a fast (within 4 min) and accurate method to determine trace amounts of pesticides in soil.     

Matrix solid-phase dispersion extraction and determination by high-performance liquid chromatography with fluorescence detection of residues of glyphosate and aminomethylphosphonic acid in tomato fruit

A method based on matrix solid-phase dispersion (MSPD) is described for the quantitative extraction of glyphosate and its major metabolite aminomethylphosphonic acid (AMPA) from tomato fruit. After application of 120 microL of HNO3 1M to the sample, the dispersion column was packed with 0.5 g of sample blended into 1 g of NH2-silica. Two aqueous fractions were obtained. First, AMPA was eluted from the column using deionized water (F1), and then a NaH2PO4 0.005 M solution was used for the elution of glyphosate (F2). Cleanup of F1 and F2 was made by ion exchange chromatography on a SAX anion exchange silica. Determination was done by HPLC with fluorescence detection after precolumn derivatization with 9-fluorenylmethylchloroformate (FMOC-Cl). Mean recoveries calculated at fortification levels of 0.5 microg/g for glyphosate and 0.4 microg/g for AMPA were 87% and 78%, respectively. The relative standard deviations (n=7) for the total procedure were 10% and 16%. Detection limits were 0.05 microg/g for glyphosate and 0.03 microg/g for AMPA.     

Development of a procedure for the multiresidue analysis of pesticides in vineyard soils and its application to real samples

A procedure for multiresidue analysis was developed for the extraction and determination of 17 pesticides, including herbicides, fungicides, and insecticides, as well as certain degradation products, in vineyard soils from La Rioja region (Spain). Different solvents and mixtures were tested in spiked pesticide‐free soils, and pesticides were comparatively evaluated by gas chromatography with mass spectrometry and liquid chromatography with mass spectrometry. Recoveries >70%, with relative standard deviations <9%, were obtained when a mixture of methanol/acetone or a mixture of methanol/CaCl₂ 0.01 M for the most polar compounds was selected as the extraction solvent. Method validation was accomplished with acceptable linearity (r² ≥ 0.987) within the concentration range of 0.005–1 μg/mL corresponding to 1.667–333.4 μg/kg and 0.835–167.1 μg/kg for liquid chromatography with mass spectrometry and gas chromatography with mass spectrometry, respectively, and detection limits <0.4 μg/kg for the compounds were studied. The extraction method was applied to 17 real vineyard soil samples, and terbuthylazine and its metabolite desethylterbuthylazine were the most ubiquitous compounds, as they were detected in the 100% of the soils analyzed. The presence of fungicides was also high, and the presence of insecticides was lower than other pesticides. The results confirm the usefulness of the optimized procedure for monitoring residues in vineyard soils.     

液相色谱-串联质谱法测定蔬菜和水果中6种新型酰胺类杀菌剂的残留量

建立了蔬菜、水果中啶酰菌胺、氟啶酰菌胺、环氟菌胺、嘧菌胺、双炔酰菌胺和硅噻菌胺6种新型酰胺类杀菌剂残留量的液相色谱-串联质谱(liquid chromatography-tandem mass spectrometry, LC-MS/MS)检测方法。试样经乙腈提取、Florisil固相萃取柱净化、以乙腈和水为流动相梯度洗脱、结合新型核壳型填料色谱柱(Poroshell 120 EC-C₁₈)分离,采用电喷雾正离子扫描、多反应监测模式质谱检测,外标法定量。结果表明:固相萃取结合新型色谱柱分离解决了酰胺类农药分析中基质效应强的难点问题。6种杀菌剂在0.5~100 μg/L范围内线性关系良好,相关系数(r)≥0.9990;对7种蔬菜及3种水果进行0.5、5和50 μg/kg 3个加标水平的回收试验,回收率为65%~124%,相对标准偏差(RSD, n=5)为1%~18%; 6种杀菌剂的方法检出限(S/N≥3)为0.10~0.17 μg/kg。该净化、分离模式显著降低了蔬菜、水果中6种新型酰胺类农药的基质效应,方法简单准确,可满足蔬菜和水果中啶酰菌胺等6种新型酰胺类杀菌剂残留检测的要求。     

Liquid chromatographic determination of novel aminithiazolecarboxamide fungicide residues in soil and crops using online solid-phase extraction

A simple and convenient liquid chromatographic method has been developed and applied to the analysis of the novel aminothiazolecarboxamide fungicide, ethaboxam, in soil and crops. After the isolation and concentration of analyte from soil and crops, clean-up and separation of sample solutions are performed by high-performance liquid chromatography with online solid-phase extraction. Good linearity (r2 > 0.9995), recovery [for soil, 95.3-98.4%, and crops (grape, red pepper), 92.9-95.9%], and repeatability are achieved in the calibration range of 0.1-10.3 microg/mL. The limit of detection is the 2.5 parts per billion (ppb) (40 g of soil) and the 20 ppb (25 g of crops), respectively. This assay method shows the suitability for the residual analysis of ethaboxam in soil and crops.     

Multiresidue determination of organochlorine pesticides and polychlorinated biphenyls in milk by gas chromatography with electron-capture detection after extraction by matrix solid-phase dispersion

A multiresidue analytical method based on matrix solid-phase dispersion was developed to analyze liquid milk for 22 organochlorine pesticides (OCPs) and 6 polychlorinated biphenyls (PCBs). Initial extraction is performed by loading 3 mL milk onto a 2.0 g octadecyl (C18)-bonded silica cartridge with n-hexane as the eluant. Neutral alumina column chromatography with sodium sulfate as the drying agent is used for further cleanup. The eluate is concentrated to 0.5 mL, and target analytes are determined by capillary gas chromatography with electron-capture detection. The optimized method was validated by determining accuracy (recovery percentages), precision (repeatability and reproducibility), and sensitivity (detection and quantitation limits) from analyses of milk samples fortified at 10 and 1 microg/L levels. Average recoveries were between 74 and 106% for all residues except beta-HCH, beta-endosulfan, and endosulfan sulfate. Both repeatability and reproducibility relative standard deviation values were < 22% for all residues. Detection limits ranged from 0.02 to 0.12 microg/L and quantitation limits were between 0.02 and 0.62 microg/L. The proposed analytical method may be used as a fast and simple procedure in routine determinations of OCPs and PCBs in milk.     

Determination of polybrominated diphenyl ethers in soil by ultrasonic assisted extraction and gas chromatography mass spectrometry

An analytical method for the determination of polybrominated diphenyl ethers (PBDEs) in soil was developed. Soil samples were placed in small glass columns and PBDEs extracted from soil, with a low volume of ethyl acetate (5 mL, 2× 15 min), assisted by sonication. PBDEs were determined by gas chromatography with electron impact mass spectrometric detection in the selected ion monitoring mode (GC–MS–SIM) and residues were confirmed by their retention times, selected ions and qualifier–target abundance ratios. Recovery studies were performed at 10, 1, 0.1 and 0.05 μg/kg fortification levels, and the recoveries obtained ranged from 81 to 104% with a relative standard deviation between 1 and 9%. The detection limit of the method varied from 2 to 30 pg/g and the quantification limit ranged from 7 to 100 pg/g for the different PBDEs studied. The developed method was linear over the range assayed, 0.01–10 μg/kg with determination coefficients equal or higher than 0.997. The proposed method was used to determine PBDEs levels in soil samples from different areas of Spain and PBDEs were detected in some samples with values ranging from 1.3 to 5.6 μg/kg.     

Analysis of endosulfan isomers and endosulfan sulfate in air and tomato leaves by gas chromatography with electron-capture detection and confirmation by gas chromatography-mass spectrometry

Rapid analytical methods for the determination of endosulfan isomers and endosulfan-sulfate in air and plant samples were developed. The insecticides were trapped from air using a column containing Florisil and extracted with a low volume of ethyl acetate, assisted by sonication. Pesticide residues were determined by gas chromatography with electron-capture detection using a nonpolar capillary column. Residue identities were confirmed by gas chromatography coupled with mass spectrometry. Recoveries of these compounds from air samples were always higher than 78% with an RSD lower than 11% and the detection limits obtained were at least 0.3 ng/l air. Leaf samples were homogenised with ethyl acetate and extracts cleaned-up on an aluminium oxide column. Pesticides were eluted with a hexane-ethyl acetate (80:20, v/v) mixture. Recoveries obtained from plant samples were higher than 78% with an RSD lower than 14% and detection limits in leaves were 0.02 microg/g for each pesticide. These methods were applied to study the volatilisation of endosulfan from tomato leaves under laboratory conditions. A volatilisation rate near 1% of the initial amount of endosulfan per hour was obtained during the first 24 h at room temperature.     

Molecularly imprinted solid‐phase extraction method for the gas chromatographic analysis of organochlorine fungicides in ginseng

A highly selective molecularly imprinted solid‐phase extraction coupled with gas chromatography method was developed for the simultaneous isolation and determination of four organochlorine fungicides (pentachloronitrobenzene, pentachloroaniline, methylpentachlorophenyl sulfide, and hexachlorobenzene) in ginseng samples. A novel molecularly imprinted polymer with pentachloronitrobenzene as template was synthesized by precipitation polymerization employing butanone/n‐heptane (6.5:3.5, v/v) solution as porogen. The limit of detection of the method was 0.001 mg/kg, and the limit of quantification was 0.002 mg/kg. The different spiked levels of ginseng samples were 0.05, 0.5, 2.0 for pentachloronitrobenzene and pentachloroaniline, and 0.01, 0.1, 1.0 for methylpentachlorophenyl sulfide and hexachlorobenzene. The average recoveries of four organochlorine fungicides were 87.6–92.3% of pentachloronitrobenzene, 79.3–95.2% of pentachloroaniline, 80.3–90.4% of methylpentachlorophenyl sulfide, and 83.5–91.7% of hexachlorobenzene, respectively. This new method could be applied to direct determination of four organochlorine fungicides in ginseng samples.