sp2 C-H activation of dimethyl fumarate by a [(Cp*Co)2-μ-(η4 : η4-toluene)] complex

The well-defined oxidative addition of the vinylic sp(2) C-H bond of dimethyl fumarate is mediated by the cobalt triple decker complex [(Cp*Co)(2)-μ-(η(4) : η(4)-toluene)] (1) at ambient temperature, affording the dinuclear, bridging cobalt hydride, fumaryl compound (2). The C-H activation product has been characterized by mass spectrometry, NMR spectroscopy, and X-ray crystallography. Computational studies of 2 support asymmetric bonding interactions between the two metal centres and the bridging hydride/fumaryl fragments. Monitoring the reaction of dimethyl fumarate with 1 by (1)H NMR spectroscopy allows observation of intermediate [Cp*Co(MeO(2)CCH=CHCO(2)Me)](n) (n = 1 or 2) (3). Addition of 4 equivalents of dimethyl fumarate to 1 results in rapid formation of the bis(ligand) adduct Cp*Co(η(2)-MeO(2)CCH=CHCO(2)Me)(2) (5). Reversibility of the C-H activation was probed by reaction of additional dimethyl fumarate with 2, suggesting ligand induced reductive elimination is possible under ambient conditions. Reaction between 2 and strong σ or π ligands, such as PMe(3) or CO, affords the corresponding Cp*Co(η(2)-MeO(2)CCH=CHCO(2)Me)(L) (L = PMe(3) (7); L = CO (8)) complexes when heated, demonstrating the ability of 2 to undergo two electron redox processes. Further evidence for reversible C-H activation is provided by the isomerization of dimethyl maleate to the corresponding fumarate using 2, suggesting the complex can serve as a source of Co(I) under the appropriate catalytic conditions.     

Transmission of trans effects in dinuclear complexes.

The substitution of a terminal hydride ligand in the complexes [Ir(2)(mu-H)(mu-Pz)(2)H(3)(L)P(i)Pr(3))(2)] (L = NCCH(3) (1) or pyrazole (3)) by chloride provokes a significant change in the lability of the L ligand, despite the fact that the substituted hydride and the L ligand lie in opposite extremes of the diiridium(III) complexes. Detailed structural studies of complex 3 and its chloro-trihydride analogue [Ir(2)(mu-H)(mu-Pz)(2)H(2)Cl(HPz)(P(i)Pr(3))(2)] (4) have shown that this behavior is a consequence of the transmission of ligand trans effects from one extreme of the molecule to the other, with the participation of the bridging hydride. Extended Hückel calculations on model diiridium complexes have suggested that such trans effect transmissions are due to the formation of molecular orbitals of sigma symmetry extended along the backbones of the complexes. This is also an expected feature for metal-metal bonded complexes. The feasibility of the transmission of ligand trans effects and trans influences through metal-metal bonds and its relevance to the understanding of both the reactivity and structures of metal-metal bonded dinuclear compounds have been substantiated through structural studies and selected reactions of the diiridium(II) complexes [Ir(2)(mu-1,8-(NH)(2)naphth)I(CH(3))(CO)(2)(P(i)Pr(3))(2)] (isomers 6 and 7) and their cationic derivatives [Ir(2)(mu-1,8-(NH)(2)naphth)(CH(3))(CO)(2)(P(i)Pr(3))(2)](CF(3)SO(3)) (isomers 8 and 9).     

Binuclear Oxidative Addition of Hydrogen in Diamidonaphthalene-Bridged Diiridium Complexes

Binuclear iridium(ii) complexes readily activate H ₂ , in contrast to the behavior of related diiridium(I ) species. The reaction occurs at the pocket of the binuclear complex to produce dihydridoiridium(III ) complexes containing a bridging and a terminal hydride. Due to their Brønsted acidity, these dihydrido complexes can react with a second molecule of H₂ to form trihydrido complexes. This process implies the heterolytic activation of hydrogen.     

Autocatalysis for C-H bond activation by ruthenium(II) complexes in catalytic arylation of functional arenes

Kinetic data for the C-H bond activation of 2-phenylpyridine by Ru(II)(carboxylate)(2)(p-cymene) I (acetate) and I' (pivalate) are available for the first time. They reveal an irreversible autocatalytic process catalyzed by the coproduct HOAc or HOPiv (acetonitrile, 27 °C). The overall reaction is indeed accelerated by the carboxylic acid coproduct and water. It is retarded by a base, in agreement with an autocatalytic process induced by HOAc or HOPiv that favors the dissociation of one carboxylate ligand from I and I' and consequently the ensuing complexation of 2-phenylpyridine (2-PhPy). The C-H bond activation initially delivers Ru(O(2)CR)(o-C(6)H(4)-Py)(p-cymene) A or A', containing one carboxylate ligand (OAc or OPiv, respectively). The overall reaction is accelerated by added acetates. Consequently, C-H bond activation (faster for acetate I than for pivalate I') proceeds via an intermolecular deprotonation of the C-H bond of the ligated 2-PhPy by the acetate or pivalate anion released from I or I', respectively. The 18e complexes A and A' easily dissociate, by displacement of the carboxylate by the solvent (also favored by the carboxylic acid), to give the same cationic complex B(+) {[Ru(o-C(6)H(4)-Py)(p-cymene)(MeCN)](+)}. Complex B(+) is reactive toward oxidative addition of phenyl iodide, leading to the diphenylated 2-pyridylbenzene.     

A theoretical study on the mechanisms of intermolecular hydroacylation of aldehyde catalyzed by neutral and cationic rhodium complexes

In this paper, we used density functional theory(DFT) computations to study the mechanisms of the hydroacylation reaction of an aldehyde with an alkene catalyzed by Wilkinson's catalyst and an organic catalyst 2-amino-3-picoline in cationic and neutral systems. An aldehyde's hydroacylation includes three stages: the C–H activation to form rhodium hydride(stage I), the alkene insertion into the Rh–H bond to give the Rh-alkyl complex(stage II), and the C–C bond formation(stage III). Possible pathways for the hydroacylation originated from the trans and cis isomers of the catalytic cycle. In this paper, we discussed the neutral and cationic pathways. The rate-determining step is the C–H activation step in neutral system but the reductive elimination step in the cationic system. Meanwhile, the alkyl group migration-phosphine ligand coordination pathway is more favorable than the phosphine ligand coordination-alkyl group migration pathway in the C–C formation stage. Furthermore, the calculated results imply that an electron-withdrawing group may decrease the energy barrier of the C–H activation in the benzaldehyde hydroacylation.     

Theoretical analysis of the mechanism of palladium(II) acetate-catalyzed oxidative Heck coupling of electron-deficient arenes with alkenes: effects of the pyridine-type ancillary ligand and origins of the meta-regioselectivity

A systematic theoretical study is carried out on the mechanism for Pd(II)-catalyzed oxidative cross-coupling between electron-deficient arenes and alkenes. Two types of reaction pathways involving either a sequence of initial arene C-H activation followed by alkene activation, or the reverse sequence of initial alkene C-H activation followed by arene activation are evaluated. Several types of C-H activation mechanisms are discussed including oxidative addition, σ-bond metathesis, concerted metalation/deprotonation, and Heck-type alkene insertion. It is proposed that the most favored reaction pathway should involve an initial concerted metalation/deprotonation step for arene C-H activation by (L)Pd(OAc)(2) (L denotes pyridine type ancillary ligand) to generate a (L)(HOAc)Pd(II)-aryl intermediate, followed by substitution of the ancillary pyridine ligand by alkene substrate and direct insertion of alkene double bond into Pd(II)-aryl bond. The rate- and regio-determining step of the catalytic cycle is concerted metalation/deprotonation of arene C-H bond featuring a six-membered ring transition state. Other mechanism alternatives possess much higher activation barriers, and thus are kinetically less competitive. Possible competing homocoupling pathways have also been shown to be kinetically unfavorable. On the basis of the proposed reaction pathway, the regioselectivity predicted for a number of monosubstituted benzenes is in excellent agreement with experimental observations, thus, lending further support for our proposed mechanism. Additionally, the origins of the regioselectivity of C-H bond activation is elucidated to be caused by a major steric repulsion effect of the ancillary pyridine type ligand with ligands on palladium center and a minor electronic effect of the preinstalled substituent on the benzene ring on the cleaving C-H bond. This would finally lead to the formation of a mixture of meta and para C-H activation products with meta products dominating while no ortho products were detected. Finally, the multiple roles of the ancillary pyridine type ligand have been discussed. These insights are valuable for our understanding and further development of more efficient and selective transition metal-catalyzed oxidative C-H/C-H coupling reactions.     

The Fascinating Flexibility and Coordination Modes of a Pentamethylene Connected Macrocyclic CNC Pincer Ligand

The coordination chemistry of an electron-rich macrocyclic CNC pincer-ligand consisting of two pentamethylene tethered N-heterocyclic carbene moieties on a carbazole backbone (bimca^C5) is investigated by mainly NMR spectroscopy and X-ray crystal structure analysis. A bridging coordination mode is found for the lithium complex. With the larger and softer potassium ion, the ligand adopts a facial coordination mode and a polymeric structure by intermolecular potassium nitrogen interactions. The facial coordination is also confirmed at a Cp*Ru fragment, while C-H activation under dehydrogenation at the alkyl chain is observed upon reaction with [Ru(PPh₃)₃Cl₂]. In contrast, Pd(OAc)₂ reacts under C-H activation at the central carbon atom of the pentamethylene tether to an alkyl-pincer macrocycle.     

Periodic density functional theory study of propane oxidative dehydrogenation over V2O5(001) surface

The oxidative dehydrogenation (ODH) of propane on single-crystal V(2)O(5)(001) is studied by periodic density functional theory (DFT) calculations. The energetics and pathways for the propane to propene conversion are determined. We show that (i) the C-H bond of propane can be activated by both the terminal and the bridging lattice O atoms on the surface with similar activation energies. At the terminal O site both the radical and the oxo-insertion pathways are likely for the C-H bond activation, while only the oxo-insertion mechanism is feasible at the bridging O site. (ii) Compared to that at the terminal O site, the propene production from the propoxide at the bridging O site is much easier due to the weaker binding of propoxide at the bridging O. It is concluded that single-crystal V(2)O(5)(001) is not a good catalyst due to the terminal O being too active to release propene. It is expected that an efficient catalyst for the ODH reaction has to make a compromise between the ability to activate the C-H bond and the ability to release propene.     

Development of more labile low electron count Co(I) sources: mild, catalytic functionalization of activated alkanes using a [(Cp*Co)2-μ-(η4:η4-arene)] complex

Catalytic transfer dehydrogenation of silyl protected amines, requiring sp(3) C-H bond activation, is mediated by a bridging arene complex of the type [(Cp*Co)(2)-μ-(η(4):η(4)-arene)] under mild conditions. Mechanistic and qualitative rate studies establish the compound as a more reactive Co(I) source when compared to other known Cp*Co(I) complexes.     

C-H activations at iridium(I) square-planar complexes promoted by a fifth ligand

In the presence of ligands such as acetonitrile, ethylene, or propylene, the Ir(I) complex [Ir(1,2,5,6-eta-C8H12)(NCMe)(PMe3)]BF4 (1) transforms into the Ir(III) derivatives [Ir(1-kappa-4,5,6-eta-C8H12)(NCMe)(L)(PMe3)]BF4 (L = NCMe, 2; eta2-C2H4, 3; eta2-C3H6, 4), respectively, through a sequence of C-H oxidative addition and insertion elementary steps. The rate of this transformation depends on the nature of L and, in the case of NCMe, the pseudo-first-order rate constants display a dependence upon ligand concentration suggesting the formation of five-coordinate reaction intermediates. A similar reaction between 1 and vinyl acetate affords the Ir(III) complex [Ir(1-kappa-4,5,6-eta-C8H12){kappa-O-eta2-OC(Me)OC2H3}(PMe3)]BF4 (7) via the isolable five-coordinate Ir(I) compound [Ir(1,2,5,6-eta-C8H12){kappa-O-eta2-OC(Me)OC2H3}(PMe3)]BF4 (6). DFT (B3LYP) calculations in model complexes show that reactions initiated by acetonitrile or ethylene five-coordinate adducts involve C-H oxidative addition transition states of lower energy than that found in the absence of these ligands. Key species in these ligand-assisted transformations are the distorted (nonsquare-planar) intermediates preceding the intramolecular C-H oxidative addition step, which are generated after release of one cyclooctadiene double bond from the five-coordinate species. The feasibility of this mechanism is also investigated for complexes [IrCl(L)(PiPr3)2] (L = eta2-C2H4, 27; eta2-C3H6, 28). In the presence of NCMe, these complexes afford the C-H activation products [IrClH(CH=CHR)(NCMe)(PiPr3)2] (R = H, 29; Me, 30) via the common cyclometalated intermediate [IrClH{kappa-P,C-P(iPr)2CH(CH3)CH2}(NCMe)(PiPr3)] (31). The most effective C-H oxidative addition mechanism seems to involve three-coordinate intermediates generated by photochemical release of the alkene ligand. However, in the absence of light, the reaction rates display dependences upon NCMe concentration again indicating the intermediacy of five-coordinate acetonitrile adducts.     

Syntheses, structures, and reactivities of mono- and dinuclear iridium thiolato complexes containing nitrosyl ligands

Reactions of the iridium(III) nitrosyl complex [Ir(NO)Cl2(PPh3)2] (1) with hydrosulfide and arenethiolate anions afforded the square-pyramidal iridium(III) complex [Ir(NO)(SH)2(PPh3)2] (2) with a bent nitrosyl ligand and a series of the square-planar iridium(I) complexes [Ir(NO)(SAr)2(PPh3)] (3a, Ar = C6H2Me3-2,4,6 (Mes); 3b, Ar = C6H3Me2-2,6 (Xy); 3c, Ar = C6H2Pri3-2,4,6) containing a linear nitrosyl ligand, respectively. Complex 1 also reacted with alkanethiolate anions or alkanethiols to give the thiolato-bridged diiridium complexes [Ir(NO)(mu-SPri)(SPri)(PPh3)]2 (4) and [Ir(NO)(mu-SBut)(PPh3)]2 (5). Complex 4 contains two square-pyramidal iridium(III) centers with a bent nitrosyl ligand, whereas 5 contains two tetrahedral iridium(0) centers with a linear nitrosyl ligand and has an Ir-Ir bond. Upon treatment with benzoyl chloride, 3a and 3b were converted into the (diaryl disulfide)- and thiolato-bridged dichlorodiiridium(III) complexes [[IrCl(mu-SC6HnMe4-nCH2)(PPh3)]2(mu-ArSSAr)] (6a, Ar = Mes, n = 2; 6b, Ar = Xy, n = 3) accompanied by a loss of the nitrosyl ligands and cleavage of a C-H bond in an ortho methyl group of the thiolato ligands. Similar treatment of 4 gave the dichlorodiiridium complex [Ir(NO)(PPh3)(mu-SPri)3IrCl2(PPh3)] (7), which has an octahedral dichloroiridium(III) center and a distorted trigonal-bipyramidal Ir(I) atom with a linear nitrosyl ligand. The detailed structures of 3a, 4, 5, 6a, and 7 have been determined by X-ray crystallography.     

Aromatic vs aliphatic C-H bond activation by rhodium(I) as a function of agostic interactions: catalytic H/D exchange between olefins and methanol or water

The aryl-PC type ligand 3, benzyl(di-tert-butyl)phosphane, reacts with [Rh(coe)(2)(solv)(n)()]BF(4) (coe = cyclooctene, solv = solvent), producing the C-H activated complexes 4a-c (solv = (a). acetone, (b). THF, (c). methanol). Complexes 4a-c undergo reversible arene C-H activation (observed by NMR spin saturation transfer experiments, SST) and H/D exchange into the hydride and aryl ortho-H with ROD (R = D, Me). They also promote catalytic H/D exchange into the vinylic C-H bond of olefins, with deuterated methanol or water utilized as D-donors. Unexpectedly, complex 2, based on the benzyl-PC type ligand 1 (analogous to 3), di-tert-butyl(2,4,6-trimethylbenzyl)phosphane, shows a very different reversible C-H activation pattern as observed by SST. It is not active in H/D exchange with ROD and in catalytic H/D exchange with olefins. To clarify our observations regarding C-H activation/reductive elimination in both PC-Rh systems, density functional theory (DFT) calculations were performed. Both nucleophilic (oxidative addition) and electrophilic (H/D exchange) C-H activation proceed through eta(2)-C,H agostic intermediates. In the aryl-PC system the agostic interaction causes C-H bond acidity sufficient for the H/D exchange with water or methanol, which is not the case in the benzyl PC-Rh system. In the latter system the C-H coordination pattern of the methyl controls the reversible C-H oxidative addition leading to energetically different C-H activation processes, in accordance with the experimental observations.     

Mechanistic studies of ethylene hydrophenylation catalyzed by bipyridyl Pt(II) complexes

Cationic platinum(II) complexes [((t)bpy)Pt(Ph)(L)](+) [(t)bpy =4,4'-di-tert-butyl-2,2'-bipyridyl; L = THF, NC(5)F(5), or NCMe] catalyze the hydrophenylation of ethylene to generate ethylbenzene and isomers of diethylbenzene. Using ethylene as the limiting reagent, an 89% yield of alkyl arene products is achieved after 4 h at 120 °C. Catalyst efficiency for ethylene hydrophenylation is diminished only slightly under aerobic conditions. Mechanistic studies support a reaction pathway that involves ethylene coordination to Pt(II), insertion of ethylene into the Pt-phenyl bond, and subsequent metal-mediated benzene C-H activation. Studies of stoichiometric benzene (C(6)H(6) or C(6)D(6)) C-H/C-D activation by [((t)bpy)Pt(Ph-d(n))(THF)](+) (n = 0 or 5) indicate a k(H)/k(D) = 1.4(1), while comparative rates of ethylene hydrophenylation using C(6)H(6) and C(6)D(6) reveal k(H)/k(D) = 1.8(4) for the overall catalytic reaction. DFT calculations suggest that the transition state for benzene C-H activation is the highest energy species along the catalytic cycle. In CD(2)Cl(2), [((t)bpy)Pt(Ph)(THF)][BAr'(4)] [Ar' = 3,5-bis(trifluoromethyl)phenyl] reacts with ethylene to generate [((t)bpy)Pt(CH(2)CH(2)Ph)(η(2)-C(2)H(4))][BAr'(4)] with k(obs) = 1.05(4) × 10(-3) s(-1) (23 °C, [C(2)H(4)] = 0.10(1) M). In the catalytic hydrophenylation of ethylene, substantial amounts of diethylbenzenes are produced, and experimental studies suggest that the selectivity for the monoalkylated arene is diminished due to a second aromatic C-H activation competing with ethylbenzene dissociation.     

Theoretical study of the mechanism of alkane hydroxylation and ethylene epoxidation reactions catalyzed by diiron bis-oxo complexes. The effect of substrate molecules

The hybrid density functional method B3LYP was used to study the mechanism of the hydrocarbon (methane, ethane, methyl fluoride, and ethylene) oxidation reaction catalyzed by the complexes cis-(H(2)O)(NH(2))Fe(mu-O)(2)(eta(2)-HCOO)(2)Fe(NH(2))(H(2)O), I, and cis-(HCOO)(Imd)Fe(mu-O)(2)(eta(2)-HCOO)(2)Fe(Imd)(HCOO) (Imd = Imidazole), I_m, the "small" and "medium" model of compound Q of the methane monooxygenase (MMO). The improvement of the model from "small" to "medium" did not change the qualitative conclusions but significantly changed the calculated energetics. As in the case of methane oxidation reported by the authors previously, the reaction of all the substrates studied here is shown to start by coordination of the substrate molecule to the bridging oxygen atom, O(1) of I, an Fe(IV)-Fe(IV) complex, followed by the H-atom abstraction at the transition state III leading to the bound hydroxy alkyl intermediate IV of Fe(III)-Fe(IV) core. IV undergoes a very exothermic coupling of alkyl and hydroxy groups to give the alcohol complex VI of Fe(III)-Fe(III) core, from which alcohol dissociates. The H(b)-atom abstraction (or C-H bond activation) barrier at transition state III is found to be a few kcal/mol lower for C(2)H(6) and CH(3)F than for CH(4). The calculated trend in the H(b)-abstraction barrier, CH(4) (21.8 kcal/mol) > CH(3)F (18.8 kcal/mol) > or = C(2)H(6) (18.5 kcal/mol), is consistent with the C-H(b) bond strength in these substrates. Thus, the weaker the C-H(b) bond, the lower is the H(b)-abstraction barrier. It was shown that the replacement of a H-atom in a methane molecule with a more electronegative group tends to make the H(b)-abstraction transition state less "reactant-like". In contrast, the replacement of the H-atom in CH(4) with a less electronegative group makes the H(b)-abstraction transition state more "reactant-like". The epoxidation of ethylene by complex I is found to proceed without barrier and is a highly exothermic process. Thus, in the reaction of ethylene with complex I the only product is expected to be ethylene oxide, which is consistent with the experiment.     

C-C versus C-H activation and versus agostic C-C interaction controlled by electron density at the metal center

Based on the PCN ligand 2, a remarkable degree of control over C-C versus C-H bond activation and versus formation of an agostic C-C complex was demonstrated by choice of cationic [Rh(CO)(n)(C(2)H(4))(2-n)] (n=0, 1, 2) precursors. Whereas reaction of 2 with [Rh(C(2)H(4))(2)(solv)(n)]BF(4) results in exclusive C-C bond activation to yield product 5, reaction with the dicarbonyl precursor [Rh(CO)(2)(solv)(n)]BF(4) leads to formation of the C-H activated complex 9. The latter process is promoted by intramolecular deprotonation of the C-H bond by the hemilabile amine arm of the PCN ligand. The mixed monocarbonyl monoethylene Rh species [Rh(CO)(C(2)H(4))]BF(4) reacts with the PCN ligand 2 to give an agostic complex 7. The C-C activated complex 5 is easily converted to the C-H activated one (9) by reaction with CO; the reaction proceeds by a unique sequence of 1,2-metal-to-carbon methyl shift, agostic interaction, and C-H activation processes. Similarly, the C-C agostic complex 7 is converted to the same C-H activated product 9 by treatment with CO.     

A theoretical study of alcohol oxidation by ferrate

The conversion of methanol to formaldehyde mediated by ferrate (FeO(4)2-), monoprotonated ferrate (HFeO4-), and diprotonated ferrate (H2FeO4) is discussed with the hybrid B3LYP density functional theory (DFT) method. Diprotonated ferrate is the best mediator for the activation of the O-H and C-H bonds of methanol via two entrance reaction channels: (1) an addition-elimination mechanism that involves coordination of methanol to diprotonated ferrate; (2) a direct abstraction mechanism that involves H atom abstraction from the O-H or C-H bond of methanol. Within the framework of the polarizable continuum model (PCM), the energetic profiles of these reaction mechanisms in aqueous solution are calculated and investigated. In the addition-elimination mechanism, the O-H and C-H bonds of ligating methanol are cleaved by an oxo or hydroxo ligand, and therefore the way to the formation of formaldehyde is branched into four reaction pathways. The most favorable reaction pathway in the addition-elimination mechanism is initiated by an O-H cleavage via a four-centered transition state that leads to intermediate containing an Fe-O bond, followed by a C-H cleavage via a five-centered transition state to lead to formaldehyde complex. In the direct abstraction mechanism, the oxidation reaction can be initiated by a direct H atom abstraction from either the O-H or C-H bond, and it is branched into three pathways for the formation of formaldehyde. The most favorable reaction pathway in the direct abstraction mechanism is initiated by C-H activation that leads to organometallic intermediate containing an Fe-C bond, followed by a concerted H atom transfer from the OH group of methanol to an oxo ligand of ferrate. The first steps in both mechanisms are all competitive in energy, but due to the significant energetical stability of the organometallic intermediate, the most likely initial reaction in methanol oxidation by ferrate is the direct C-H bond cleavage.     

Activation of carbon-hydrogen bonds via 1,2-addition across M-X (X = OH or NH(2)) bonds of d(6) transition metals as a potential key step in hydrocarbon functionalization: a computational study

Recent reports of 1,2-addition of C-H bonds across Ru-X (X = amido, hydroxo) bonds of TpRu(PMe3)X fragments {Tp = hydridotris(pyrazolyl)borate} suggest opportunities for the development of new catalytic cycles for hydrocarbon functionalization. In order to enhance understanding of these transformations, computational examinations of the efficacy of model d6 transition metal complexes of the form [(Tab)M(PH3)2X]q (Tab = tris-azo-borate; X = OH, NH2; q = -1 to +2; M = TcI, Re(I), Ru(II), Co(III), Ir(III), Ni(IV), Pt(IV)) for the activation of benzene C-H bonds, as well as the potential for their incorporation into catalytic functionalization cycles, are presented. For the benzene C-H activation reaction steps, kite-shaped transition states were located and found to have relatively little metal-hydrogen interaction. The C-H activation process is best described as a metal-mediated proton transfer in which the metal center and ligand X function as an activating electrophile and intramolecular base, respectively. While the metal plays a primary role in controlling the kinetics and thermodynamics of the reaction coordinate for C-H activation/functionalization, the ligand X also influences the energetics. On the basis of three thermodynamic criteria characterizing salient energetic aspects of the proposed catalytic cycle and the detailed computational studies reported herein, late transition metal complexes (e.g., Pt, Co, etc.) in the d6 electron configuration {especially the TabCo(PH3)2(OH)+ complex and related Co(III) systems} are predicted to be the most promising for further catalyst investigation.     

Comparative reactivity of TpRu(L)(NCMe)Ph (L = CO or PMe3): impact of ancillary ligand l on activation of carbon-hydrogen bonds including catalytic hydroarylation and hydrovinylation/oligomerization of ethylene

Complexes of the type TpRu(L)(NCMe)R [L = CO or PMe3; R = Ph or Me; Tp = hydridotris(pyrazolyl)borate] initiate C-H activation of benzene. Kinetic studies, isotopic labeling, and other experimental evidence suggest that the mechanism of benzene C-H activation involves reversible dissociation of acetonitrile, reversible benzene coordination, and rate-determining C-H activation of coordinated benzene. TpRu(PMe3)(NCMe)Ph initiates C-D activation of C6D6 at rates that are approximately 2-3 times more rapid than that for TpRu(CO)(NCMe)Ph (depending on substrate concentration); however, the catalytic hydrophenylation of ethylene using TpRu(PMe3)(NCMe)Ph is substantially less efficient than catalysis with TpRu(CO)(NCMe)Ph. For TpRu(PMe3)(NCMe)Ph, C-H activation of ethylene, to ultimately produce TpRu(PMe3)(eta3-C4H7), is found to kinetically compete with catalytic ethylene hydrophenylation. In THF solutions containing ethylene, TpRu(PMe3)(NCMe)Ph and TpRu(CO)(NCMe)Ph separately convert to TpRu(L)(eta3-C4H7) (L = PMe3 or CO, respectively) via initial Ru-mediated ethylene C-H activation. Heating mesitylene solutions of TpRu(L)(eta3-C4H7) under ethylene pressure results in the catalytic production of butenes (i.e., ethylene hydrovinylation) and hexenes.     

C-H activation on a diphosphine and hydrido-bridged diiridium complex: generation and detection of an active IrII-IrII species [(Cp*Ir)2(micro-dmpm)(micro-H)]+

Reaction of [Cp*Ir(micro-H)](2) (5) (Cp* = eta(5)-C(5)Me(5)) with bis(dimethylphosphino)methane (dmpm) gives a new neutral diiridium complex [(Cp*Ir)(2)(micro-dmpm)(micro-H)(2)] (3). Treatment of 3 with methyl triflate at -30 degrees C results in the formation of [(Cp*Ir)(H)(micro-dmpm)(micro-H)(Me)(IrCp*)][OTf] (6). Warming a solution of above 0 degrees C brings about predominant generation of 32e(-) Ir(II)-Ir(II) species [(Cp*Ir)(micro-dmpm)(micro-H)(IrCp*)][OTf] (7). Further heating of the solution of 7 up to 30 degrees C for 14 h leads to quantitative formation of a new complex [(Cp*Ir)(H)(micro-Me(2)PCH(2)PMeCH(2))(micro-H)(IrCp*)][OTf] (8), which is formed by intramolecular oxidative addition of the methyl C-H bond of the dmpm ligand. Intermolecular C-H bond activation reactions with 7 are also examined. Reactions of 7 with aromatic molecules (benzene, toluene, furan, and pyridine) at room temperature result in the smooth sp(2) C-H activation to give [(Cp*Ir)(H)(micro-dmpm)(micro-H)(Ar)(IrCp*)][OTf] (Ar = Ph (9); Ar = m-Tol (10a) or p-Tol (10b); Ar = 2-Fur (11)) and [(Cp*Ir)(H)(micro-dmpm)(micro-C(5)H(4)N)(H)(IrCp*)][OTf] (12), respectively. Complex also reacts with cyclopentene at 0 degrees C to give [(Cp*Ir)(H)(micro-dmpm)(micro-H)(1-cyclopentenyl)(IrCp*)][OTf] (13). Structures of 3, 8 and 12 have been confirmed by X-ray analysis.     

Smooth C(alkyl)-H bond activation in rhodium complexes comprising abnormal carbene ligands

Rhodation of trimethylene-bridged diimidazolium salts induces the intramolecular activation of an alkane-type C-H bond and yields mono- and dimetallic complexes containing a formally monoanionic C,C,C-tridentate dicarbene ligand bound to each rhodium centre. Mechanistic investigation of the C(alkyl)-H bond activation revealed a significant rate enhancement when the carbene ligands are bound to the rhodium centre via C4 (instantaneous activation) as compared to C2-bound carbene homologues (activation incomplete after 2 days). The slow C-H activation in normal C2-bound carbene complexes allowed intermediates to be isolated and suggests a critical role of acetate in mediating the bond activation process. Computational modelling supported by spectroscopic analyses indicate that halide dissociation as well as formation of the agostic intermediate is substantially favoured with C4-bound carbenes. It is these processes that discriminate the C4- and C2-bound systems rather than the subsequent C-H bond activation, where the computed barriers are very similar in each case. The tridentate dicarbene ligand undergoes selective H/D exchange at the C5 position of the C4-bound carbene exclusively. A mechanism has been proposed for this process, which is based on the electronic separation of the abnormal carbene ligand into a cationic N-C-N amidinium unit and a metalla-allyl type M-C-C fragment.