Micro-Winkler titration method for dissolved oxygen concentration measurement

In this report a gravimetric micro-Winkler titration method for determination of dissolved oxygen concentration in water is presented. Mathematical model of the method taking into account all influence factors is derived and an uncertainty analysis is carried out to determine the uncertainty contributions of all influence factors. The method is highly accurate: the relative expanded uncertainties (k = 2) are around 1% in the case of small (9-10 g) water samples. The uncertainty analysis carried out in characterizing the uncertainty of the method is the most comprehensive published for a micro-Winkler method, resulting in experimentally obtained estimates for all uncertainty sources of practical significance (around 20 uncertainty sources altogether).     

Estimation of uncertainty in electrochemical amperometric measurement of dissolved oxygen concentration

A procedure for the estimation of measurement uncertainty of dissolved oxygen (DO) concentration measurement based on the ISO approach is presented. It is based on a mathematical model that involves 14 input parameters. The uncertainty of DO concentration strongly depends on changes in experimental details (temperature difference between calibration and measurement, the time interval between calibration and measurement, etc.). The relative measurement uncertainty is, however, practically independent of the DO concentration itself. The uncertainty is the lowest if the calibration and the measurement are done at the same temperature and on the same day. A calculation tool is provided (in the form of a GUM Workbench file) for practitioners that can be used for uncertainty calculation of DO concentrations at very different experimental conditions.Electronic Supplementary Material The uncertainty calculation example is available as a GUM Workbench calculation file C_O2_meas.smu (GUM Workbench ver. 1.3.3, Metrodata GmbH) together with its data file Input_values.xls (MS Excel 97). For those users who do not have GUM Workbench, the full report of the GUM Workbench calculation is available as a PDF file C_O2_meas.pdf. This material is available via the Internet at .     

Evaluation of laboratory performance in IMEP water interlaboratory comparisons

The aim of International Evaluation Programme (IMEP) is to present objectively the quality of chemical measurements. Participants in IMEP compare their reported measurement results with independent external certified reference values with demonstrated traceability and uncertainty, as evaluated according to international guidelines. Three major interlaboratory comparisons (ILCs), IMEP-6, IMEP-9 and IMEP-12, on trace elements in water were carried out from 1994 to 2000. Participants' results for Cd, Fe and Pb concentrations from these three different IMEP water ILCs were compared by means of suitable performance indicators. The performance evaluation criteria were set according to the requirements stated in the Council Directive 98/83/EC of 3 November 1998 on the quality of water intended for human consumption. Two different performance indicators were selected for evaluation of the individual participants' results: the commonly used z-score and the not so well-known E _n number. The group performance indicator is based on the variation of z-scores. To assess the individual measurement performance, not only the deviation of the reported measurement values from the certified reference value, but also criteria for maximum and minimum acceptable uncertainties were taken into account. The participants' performance is also reviewed by means of using a simple graphical tool, called “Naji-plots”.     

Requirements vs acceptability in proficiency testing schemes and other interlaboratory comparisons

Many laboratories take part in proficiency testing schemes, external quality assessment programmes and other interlaboratory comparisons. These have many similarities but also important differences in their modus operandi and evaluation of performance of participating laboratories. This paper attempts to highlight both the similarities and differences. It also puts particular emphasis on requirements called ”target values for uncertainty” and their meaning. Received: 24 January 2001 Accepted: 25 January 2001     

Dissolved oxygen concentration affects the accumulation of HIV-1 recombinant proteins in Escherichia coli

A central problem in aerobic growth of any culture is the maintenance of dissolved oxygen concentration (DOC) above growth-limiting levels especially in high-cell density fermentations that are usually of the fed-batch type. Fermentor studies have been conducted to determine the influence of DOC on the production of heterologous proteins in Escherichia coli. The results demonstrated that there is a significant degree of product-to-product variation in the response of heterologous protein accumulation to DOC. For translational fusions of the human immunodeficiency virus-1 (HIV-1) proteins p24Gag and Env41, the imposition of a dissolved oxygen (DO) limitation resulted in 100 and 15% increases in the respective product yields. On the other hand, the imposition of a DO limitation had no effect on the production of a similar translational fusion of the HIV-1 protein p55Gag, and a large negative effect on the production of an influenza protein (C13). The stimulatory effects of DOC on p24Gag production were investigated further. The results of my studies suggested that the stimulatory effect observed at reduced agitation rates on p24Gag accumulation was owing to an oxygen effect and not a shear effect. Furthermore, the results of my investigations indicated that the effect a DOC had on the production of p24Gag was strongly influenced by the cell density at which the culture was induced.     

Application of manganese (II) phthalocyanine synthesized in situ in the SiO2/SnO2 mixed oxide matrix for determination of dissolved oxygen by electrochemical techniques

This work describes the in situ immobilization of Mn(II) phthalocyanine (MnPc) in a porous SiO₂/SnO₂ mixed oxide matrix obtained by the sol gel processing method. The chemically modified matrix SiO₂/SnO₂/MnPc, possessing an estimated amount of 8 × 10⁻¹⁰ mol cm⁻² of MnPc on the surface, was used to prepare an electrode to analyze dissolved oxygen in water by an electrochemical technique. The electrode was prepared by mixing the material with ultrapure graphite and evaluated using differential pulse voltammetry. Dissolved O₂ was reduced at −0.31 V with a limit of detection (LOD) equal to 7.0 × 10⁻⁴ mmol L⁻¹. A mechanism involving four electrons in O₂ reduction was determined by the rotating disk electrode technique.     

A convenient and economic approach to achieve SI-traceable reference values to be used in drinking-water interlaboratory comparisons

Metrologically traceable reference values add an essential benefit to interlaboratory comparisons: unlike consensus values, they can be used to establish national and international comparability. Furthermore, the participating laboratories obtain a reliable and unbiased benchmark to check their results for accuracy. Usually, metrologically traceable reference values are obtained by so-called primary methods which demand excessive efforts at great expense. Within the framework of two national drinking-water interlaboratory comparisons (proficiency testing rounds), a new approach to provide metrologically traceable reference values was applied. It is solely based on existing data which were collected during the comparison itself. Lead (Pb) measurements serve as an example to show how metrologically traceable reference values were derived from the lead amount added during sample preparation and the amount of lead already present in the drinking-water matrix used to prepare these samples. Within this approach, the matrix content is calculated in a way similar to a standard addition experiment. An uncertainty budget for the reference value was set up which describes the link to the corresponding SI units. Isotope dilution mass spectrometry (IDMS) as a primary method was used to validate this approach in the case of cadmium, chromium, copper, lead, and nickel.     

The determination of adsorbable organically bound halogens (AOX) in soil: interlaboratory comparisons and reference materials

The interlaboratory variability in the quantification of adsorbable organically bound halogens (AOX) in industrially contaminated soil is presented. Three consecutive rounds of a proficiency testing scheme, in which between 88 and 119 routine laboratories participated, yielded relative reproducibility standard deviations between 7 and 20% at AOX contents between 10.9 and 268 mg kg⁻¹. Nineteen laboratories with established proficiency were invited to participate in the certification of the AOX content in three soil reference materials meant for the internal quality control in analytical laboratories. The certified values are (1349 ± 59) mg kg⁻¹, (80 ± 7) mg kg⁻¹ and (102 ± 8) mg kg⁻¹, respectively.     

溶解氧的快速现场测定

水体中存在的分子态氧被称为溶解氧 ( Dissolved oxygen,DO) .在环境保护工作中 ,DO是一个特别重要的指标 ,它可以直接反映水体污染的程度 [1] 和评判海水的新鲜程度[2 ] ,同时 ,DO是构建环境质量评价模型的重要参数和基础 [3] .在工业上 ,DO是有机生态肥料生产工艺过程和产品质量控制中的重要指标 [4 ] ,也是金属防腐工作中需要监测的重要参数 [5] .在生命科学中 ,DO还是反映细胞新陈代谢等重要生命活动的基本参数 [6 ] .因此 ,溶解氧的测定具有重要意义 .测定溶解氧的常用方法有碘量法及其修正法 [1,7] 、电化学方法 [8,9] 等 .这些…     

A composite thin film optical sensor for dissolved oxygen in contaminated aqueous environments

A robust optical composite thin film dissolved oxygen sensor was fabricated by ionically trapping the dye ruthenium(II) tris(4,7-diphenyl-1,10-phenanthroline) dichloride in a blended fluoropolymer matrix consisting of Nafion^® and Aflas^®. Strong phosphorescence, which was strongly quenched by dissolved oxygen (DO), was observed when the sensor was immersed in water. The sensor was robust, optically transparent, with good mechanical properties. Fast response, of a few seconds, coupled with sensitivity of about 0.1 mg L⁻¹ (DO) over the range 0-30 mg L⁻¹ and resistance to leaching, were also exhibited by this system. The Stern-Volmer (SV) plot exhibited slight downward turning at all oxygen concentrations. A linear plot was obtained when the SV equation was modified to account for the varying sensitivity of dye molecules in the matrix to the quencher. Good long term stability was observed.     

A highly accurate method for determination of dissolved oxygen: Gravimetric Winkler method

A high-accuracy Winkler titration method has been developed for determination of dissolved oxygen concentration. Careful analysis of uncertainty sources relevant to the Winkler method was carried out and the method was optimized for minimizing all uncertainty sources as far as practical. The most important improvements were: gravimetric measurement of all solutions, pre-titration to minimize the effect of iodine volatilization, accurate amperometric end point detection and careful accounting for dissolved oxygen in the reagents. As a result, the developed method is possibly the most accurate method of determination of dissolved oxygen available. Depending on measurement conditions and on the dissolved oxygen concentration the combined standard uncertainties of the method are in the range of 0.012–0.018 mg dm⁻³ corresponding to the k = 2 expanded uncertainty in the range of 0.023–0.035 mg dm⁻³ (0.27–0.38%, relative). This development enables more accurate calibration of electrochemical and optical dissolved oxygen sensors for routine analysis than has been possible before.     

An interlaboratory study as useful tool for proficiency testing of chemical oxygen demand measurements using solid substrates and liquid samples with high suspended solid content

In 2008, the first Proficiency Testing Scheme of Chemical Oxygen Demand (1^stCOD-PT^ADG) was conducted to assess the results obtained for different research groups whose field work is mainly anaerobic digestion. This study was performed using four samples, two solid samples as raw materials and two solid samples to prepare high concentration suspended solid solutions. Invitations were sent to a large number of laboratories, mainly to anaerobic digestion research groups. Finally, thirty labs from sixteen countries agreed to participate, but for different reasons four participants could not send any data. In total, twenty-six results were reported to the COD-PT coordinator.This study showed the importance of continuous participation in proficiency testing (PT) schemes in order to compare the results obtained. Taking into account the lack of a general standard method and high quality certified reference materials (CRMs), the traceability of COD determination is not currently easy to check. In addition, the spread of participants’ results obtained was high and pointed to the advisability of using consensus values due to their unreliability. Therefore, the theoretical oxygen demand (ThOD) values were considered as assigned values for all the samples analysed. On the other hand, in this PT the established standard deviation (ESD) has been determined by the Horwitz modified function.Participants of this 1^stCOD-PT^ADG were asked to give a short report on the analytical method used. Although all the participants used potassium dichromate as their oxidant reagent, their experimental procedures were very different. With the purpose of comparing the results obtained, the different experimental conditions used were classified into five methods, corresponding to two main categories, open and closed reflux. The performance of laboratories was expressed by the z-score, whose value is considered satisfactory when z-score ≤±2. The overall analytical data evaluation showed that 64% of z-scores obtained were outside the accepted limits.     

In situ synthesis of polysaccharide nanoparticles via polyion complex of carboxymethyl cellulose and chitosan

Biocompatible polymer-magnetite hybrid nanoparticles were prepared by means of in situ synthesis of magnetite within polysaccharide hydrogel nanoparticles. Hydrogel nanoparticles were first fabricated by blending high-molecular-weight carboxymethyl cellulose as an anionic polymer, and low-molecular-weight chitosan as a cationic polymer to form polyion complexes (CC particles). These polyion complexes were then chemically crosslinked using genipin, a bio-based cross-linker, to form stable nanoparticles having a semi-IPN structure (CCG particles). Magnetite was lastly synthesized within CCG particles by the coprecipitation method to obtain polymer-magnetite hybrid nanoparticles (CCGM particles). The formations of CC, CCG and CCGM particles were mainly observed by transmittance, absorbance of genipin and TEM, respectively, and their hydrodynamic diameters and zeta-potentials were analyzed. It was confirmed that the hydrodynamic diameters and the zeta-potentials of these particles were significantly influenced by pH of the suspension, which was attributed to the charges of polymers. The diameters of CCGM particles were smaller than 200 nm at any pH conditions, suggesting the possibility to apply them as drug delivery carriers. CCGM particles exhibited the responsiveness to a magnetic field in addition to their high dispersion stability, indicating their potential to be utilized as a biomaterial for hyperthermia.     

A new approach in assessing microbiological results in water analysis proficiency testing

Due to the relatively large spread in the results of microbiological proficiency tests, the z-scores are often not able to detect zero or low results as being ‘bad’ results. This paper describes an adapted z-score based on the average or the standard deviation of the 50% ‘highest’ results. The combination of the adapted z-scores of four samples enables a better judgement of the performance of each laboratory. Papers published in this section do not necessarily reflect the opinion of the Editors, the Editorial Board or the Publisher.     

Analytical chemistry and the cone penetrometer: In situ chemical characterization of the subsurface

The development of novel microanalytical techniques forin situ chemical characterization of the terrestrial subsurface environment has grown significantly over the last decade, particularly those instruments that are interfaced to the cone penetrometer. Cone penetrometer testing (CPT) has emerged as an effective means to introduce samplers and probes forin situ analysis of contaminants in soil and groundwater matrices. A variety ofin situ chemical samplers for CPT have been developed that can be driven into the subsurface to collect soil gas, groundwater, or soil samples at depth, thus providing a means of determining the vertical and horizontal extent of contamination. Cone penetrometer testing is also being explored as a means to deliverin situ subsurface sensor probes, including probes based on laser-induced fluorescence, Raman, and infrared spectroscopies for organics; on laser-induced breakdown and X-ray fluorescence spectroscopies for heavy metals; and on passive gamma-ray spectroscopy for radionuclides. The range of analytical technologies used in CPT for the determination of organic and inorganic species in the subsurface is described.     

A simple and rapid method for measuring dissolved oxygen in waters with gold microelectrode

Dissolved oxygen (DO) is an essential indicator in chemical, biological and biochemical processes and needs to be rapidly measured in many cases. In this work, a rapid, sensitive and simple electrochemical method, first derivative linear sweep voltammetry (FD-LSV), was established for the determination of DO. The peak height of FD-LSV was found to be influenced by scan rate and microelectrode surface area. An empirical formula was proposed to describe the relationship between the FD-LSV peak height and the influencing factors. Compared with other electrochemical methods for DO determination, the FD-LSV method needed lesser time and was more accurate. This method was successfully applied for the determination of the DO levels of various environmental water samples.     

Measurement of dissolved oxygen during red wines tank aging with chips and micro-oxygenation

Nowadays, micro-oxygenation is a very important technique used in aging wines in order to improve their characteristics. The techniques of wine tank aging imply the use of small doses of oxygen and the addition of wood pieces of oak to the wine. Considering the low dissolved oxygen (DO) levels used by micro-oxygenation technique it is necessary to choose the appropriate measurement principle to apply the precise oxygen dosage in wine at any time, in order to assure its correct assimilation. This knowledge will allow the oenologist to control and run the wine aging correctly.This work is a thorough revision of DO measurement main technologies applied to oenology. It describes the strengths and weaknesses of each of them, and draws a comparison of their workings in wine measurement. Both, the traditional systems by electrochemical probes, and the newest photoluminescence-based probes have been used. These probes adapted to red wines ageing study are then compared.This paper also details the first results of the dissolved oxygen content evolution in red wines during a traditional and alternative tank aging. Samples have been treated by three different ageing systems: oak barrels, stainless-steel tanks with small oak wood pieces (chips) and with bigger oak pieces (staves) with low micro-oxygenation levels. French and American oak barrels manufactured by the same cooperage have been used.     

Chromotropic acid-formaldehyde reaction in strongly acidic media. The role of dissolved oxygen and replacement of concentrated sulphuric acid

The procedure for formaldehyde analysis recommended by the National Institute for Occupational Safety and Health (NIOSH) is the Chromotropic acid spectrophotometric method, which is the one that uses concentrated sulphuric acid. In the present study the oxidation step associated with the aforementioned method for formaldehyde determination was investigated. Experimental evidence has been obtained indicating that when concentrated H₂SO₄ (18 mol l⁻¹) is used (as in the NIOSH procedure) that acid is the oxidizing agent. On the other hand, oxidation through dissolved oxygen takes place when concentrated H₂SO₄ is replaced by concentrated hydrochloric (12 mol l⁻¹) and phosphoric (14.7 mol l⁻¹) acids as well as by diluted H₂SO₄ (9.4 mol l⁻¹). Based on investigations concerning the oxidation step, a modified procedure was devised, in which the use of the potentially hazardous and corrosive concentrated H₂SO₄ was eliminated and advantageously replaced by a less harmful mixture of HCl and H₂O₂.     

A multisyringe flow injection Winkler-based spectrophotometric analyzer for in-line monitoring of dissolved oxygen in seawater

An integrated analyzer based on the multisyringe flow injection analysis approach is proposed for the automated determination of dissolved oxygen in seawater. The entire Winkler method including precipitation of manganese(II) hydroxide, fixation of dissolved oxygen, dissolution of the oxidized manganese hydroxide precipitate, and generation of iodine and tri-iodide ion are in-line effected within the flow network. Spectrophotometric quantification of iodine and tri-iodide at the isosbestic wavelength of 466 nm renders enhanced method reliability. The calibration function is linear up to 19 mg L⁻¹ dissolved oxygen and an injection frequency of 17 per hour is achieved. The multisyringe system features a highly satisfying signal stability with repeatabilities of 2.2% RSD that make it suitable for continuous determination of dissolved oxygen in seawater. Compared to the manual starch-end-point titrimetric Winkler method and early reported automated systems, concentrations and consumption of reagents and sample are reduced up to hundredfold. The versatility of the multisyringe assembly was exploited in the implementation of an ancillary automatic batch-wise Winkler titrator using a single syringe of the module for accurate titration of the released iodine/tri-iodide with thiosulfate.     

QUASIMEME results of laboratories involved in the German Marine Monitoring Programme for the North and Baltic Seas

This case study is written for laboratories in the German Marine Monitoring Program (GMMP) for the North and Baltic Seas in order to give support to the assessment of proficiency testing results for their external quality assurance. A second issue is to provide a practical, understandable and common way for the calculation of laboratory performance parameters, so-called combination scores. In this paper, the GMMP laboratory proficiency testing results of QUASIMEME (Quality Assurance of Information for Marine Environmental Monitoring in Europe) Laboratory Performance Studies for the last 5 years were reviewed. Combination scores for organochlorine pesticides and chlorinated biphenyls in marine sediment are presented and explained. However, the assessment approach is very general and should be applicable to most testing laboratories in the chemical field.Presented at the Eurachem PT Workshop September 2005, Portorož, Slovenia