Hydrogen bond energies and cooperativity in substituted calix[n]arenes (n = 4, 5)

Hydrogen-bonded interactions in para-substituted calix[n]arenes (CX[n]) (n = 4, 5) and their thia analogues are analyzed using the recently proposed molecular tailoring approach. The cooperative contribution toward the hydrogen-bonding network within the CX[5] host is shown to be nearly 5 times larger than that in its thia analogue. Hydrogen bond strengths in the O-H···O network are enhanced on substitution of an electron-donating group. The cooperativity contributions are reflected in the electron density at the bond critical point in the quantum theory of atoms in molecules.     

Uranium(IV) complexes of calix[n]arenes (n = 4, 6 and 8)

Reaction of UCl4 with calix[n]arenes (n = 4, 6 and 8) in THF or pyridine gave the mononuclear [UCl2(calix[4]arene--2H)(THF)2], bis-binuclear [U2Cl2(calix[6]arene--6H)(THF)3]2 and trinuclear [Hpy]6[U3Cl11(calix[8]arene--7H)] complexes, respectively, which are the first U(IV) complexes of O-unsubstituted calixarenes.     

Electronic structure of functionalized thia- and calix[4]arenes

The electronic structure of calix[4]arene phosphine oxides (CPO) and thiacalix[4]arene phosphine oxides (TCPO) is studied by X-ray photoelectron and emission spectroscopy and quantum chemical methods. The electron density distribution over atoms contained in CPO and TCPO is analyzed. The structure of higher occupied molecular orbitals (HOMO) is examined. It is shown that HOMOs of these compounds mainly consist of contributions of oxygen 2p atomic orbitals (AOs) of phosphoryl and hydroxyl moieties and also bridging sulfur 3p AOs, which indicates the bifunctionality of the considered extractant molecules. The mutual effect of the lower and upper rims of CPOs and TCPOs as well as the effect of their structures on the electron density distribution over calixarene molecules is investigated.     

Capillary electrophoresis separation of p-sulfonated calix[n]arenes, n=4,6,8

The CE separation of p-sulfonated calix[n]arenes, where n=4,6 and 8, was investigated. Under positive potential conditions optimum separation was found to be borate buffer modified with sodium dodecyl sulfate. Under these conditions separation was achieved in less than 10 min. The effect on the separation of the addition of divalent cations: Mg(2+), Ca(2+) and Ba(2+) was studied. p-Sulfonatedcalixarenes were detected in the anodic side of the capillary. There was an improvement in the reproducibility and analysis time although efficiency did not improve significantly.     

Ab initio and density functional studies of cooperative hydrogen bonding in calix[4]-and calix[6]arenes

The cone conformation of C ₄ symmetry is shown by the Hartree-Fock method (3-21G basis) to be the predominant conformer of calix[4]arene; the compressed cone of C ₂ symmetry is the major conformer of calix[6]arene. Using quantum chemical methods we calculated hydrogen bond cleavage energies for calix[4]-(ab initio and density functional methods) and calix[6]arene (ab initio), and also for the complex of calix[4]arene with carbon disulfide. These energies along with structural data point to the cooperative effect of hydrogen bonds. The results of these studies provided an explanation to the greater conformational lability of calix[6]arene compared with calix[4]arene molecules. It is also predicted that the nucleophilic substitution reaction involving calix[6]arene in the presence of weak bases and in aprotic solvents, as well as in the gas phase, will occur via diastereomeric transition states.     

Proton conductivity of calix[n]arene-para-sulfonic acids (n = 4, 8)

High proton conductivity in calix[n]arene-para-sulfonic acid hydrates (n = 4, 8) reaching a value of 10^?1 Ohm^?1 cm^?1 at a relative humidity of 80% was revealed for the first time. This value is close to the record conductivity of solid proton conductors and acid water solutions. The dependence of proton transfer parameters and water quantity in the title compounds dependent on the relative humidity of air was investigated.     

Syntheses and metal ions recognition of dendritic calix[n]arenes (n = 6,8) amide derivative

Dendritic p-t-butylcalix[n]arene amide derivatives with terminal amino groups of the first and second generations were synthesized by using divergent methods from ammonolysis of ethyl calixarylacetate with 1,6-diaminohexane and Michael addition of methyl acrylate. Their structures were confirmed by IR, ¹H NMR. The recognition properties of these amide derivatives for several kinds of metal ions were studied with UV-Vis spectroscopy. The results showed a great affinity for soft Ag⁺ and UO₂ ²⁺ ions and formed 1:2 or 1:3 stoichiometric complexes. Translated from Chinese Journal of Applied Chemistry, 2006, 23(3) (in Chinese)     

The molecular structure and vibrational spectra of corrolazine metal complexes (CzM) by density functional theory

The ground-state geometries, electronic structures and vibrational frequencies of metal corrolazine complexes, CzM (M=Mn, Co, Ni and Fe) have been studied using B3LYP/6-311 g(d) method. The molecular geometries are sensitive to the species of the metal, and the bond length of the MN is increase with the metal atom radii. The ground-state electronic structures indicate that there are strong interactions between dx2-y2 of the metal fragments and the corrolazine fragments. The calculations also indicate that the CzNi is the stabilest among the four metal corrolazine complexes. Vibrational frequencies of these metal corrolazine complexes were also calculated and were assigned to the local coordinates of the corrolazine ring, which reveals the some common feature of the molecular vibrations of the metal corrolazine complexes as four-coordination metallocorrolazines.     

Synthesis and structure of [2-oxo(thioxo)tetrahydropyrimidin-4-yl]calix[4]arenes

Cone-shaped di- and tetrapropoxycalix[4]arenes functionalized at the upper rim with one or two 2-oxo(thioxo)tetrahydropyrimidine residues were synthesized by the Biginelli reaction of formylcalixarenes with urea (thiourea) and methyl acetoacetate. The steric structure of the products was studied by NMR and X-ray diffraction. The Biginelli reaction with dipropoxyformylcalixarene was diastereoselective, and it quantitatively produced the corresponding meso form. Tetrapropoxydiformylcalixarenes under analogous conditions gave rise to equimolar mixtures of racemic and meso compounds. The macrocyclic skeleton of the synthesized pyrimidine-containing calixarenes in crystal and in solution has a flattened cone conformation. (5-Methoxycarbonyl-2-oxotetrahydropyrimidin-4-yl)calixarene molecules in crystal undergo self-organization to form infinite chains via repeated inclusion of the methoxy group into the cavity of the neighboring macrocycle. Selforganization of bis(5-methoxycarbonyl-2-oxotetrahydropyrimidin-4-yl)calixarene with formation of analogous chains involves intermolecular hydrogen bonding NH ... O=C.     

Synthesis of chiral calix[n]arenes. Part 2: Synthesis of new chiral calix[n]arenes based on (p-hydroxy-phenyl)-menthone

The synthesis of new chiral calix[n]arenes, related to Corey's phenyl-menthol, is described. Starting from enantiomerically pure (R)-(+)-pulegone, calix[n]arenes with different ring sizes could be obtained in reasonable yield.     

Odd-numbered oxacalix[n]arenes (n = 5, 7): synthesis and solid-state structures

The critical synthetic access to odd-numbered calix[n]arenes has evidently resulted in less attention for these macrocycles, although specific molecular recognition phenomena have been observed for some of them. A straightforward fragment coupling approach has been designed, applying kinetically controlled nucleophilic aromatic substitution reaction conditions, affording odd-numbered oxacalix[n]arenes (n = 5, 7) selectively in high yields. The solid-state conformational behavior and the oxacalix[n]arene cavity size were explored by single-crystal X-ray diffraction studies.     

Photo, proton and metal ion responsive wide-rim acridane substituted calix[4]arenes

Calix[4]arenes bearing acridinium and acridane substituents at the wide rim and a short glycol chain and two OH-groups at the narrow rim have been prepared. The interaction with alkali metal ions can be identified with the naked eye by the change in solution color arising from deprotonation of the OH-groups. Unlike the acridane calixarenes, the acridinium-substituted calixarene-crown-4 binds sodium ions. Due to the photoheterolysis of the acridane, calixarene sodium ions are picked up from the acetonitrile solution due to the formation of acridinium calixarene.     

Substituted calix[n]arenes. Synthesis ofp-isopropylcalix[4]arene and the structure of its benzene clathrate

p-Isopropylcalix[4]arens was synthesized by alkylation of unsubstituted calix[4]arene in the presence of ferric chloride hexahydrate. The structure of the compound and its benzene clathrate was established by NMR spectroscopy and X-ray diffraction analysis. Tashkent State University. A. S. Sadykov Institute of Bioorganic Chemistry, Academy of Sciences, Uzbekistan. Translated fromZhurnal Strukturnoi Khimii, Vol. 37, No. 3, pp. 539–543, May–June, 1996.     

Synthesis and crystal structure of uranium(IV) complexes with calix[n]arenes (n = 4, 6 and 8): mononuclear, polynuclear and 1D polymeric species

Reactions of UCl4 with calix[n]arenes (n = 4, 6) in THF gave the mononuclear [UCl2(calix[4]arene - 2H)(THF)2].2THF (.2THF) and the bis-dinuclear [U2Cl2(calix[6]arene - 6H)(THF)3]2.6THF (.6THF) complexes, respectively, while the mono-, di- and trinuclear compounds [Hpy]2[UCl3(calix[4]arene - 3H)].py (.py), [Hpy](4)[U2Cl6(calix[6]arene - 6H)].3py (.3py), [Hpy]3[U2Cl5(calix[6]arene - 6H)(py)].py (.py) and [Hpy]6[U3Cl11(calix[8]arene - 7H)].3py (.3py) were obtained by treatment of UCl4 with calix[n]arenes (n = 4, 6, 8) in pyridine. The sodium salt of calix[8]arene reacted with UCl4 to give the pentanuclear complex [U{U2Cl3(calix[8]arene - 7H)(py)5}2].8py (.8py). Reaction of U(acac)4 (acac = MeCOCHCOMe) with calix[4]arene in pyridine afforded the mononuclear complex [U(acac)2(calix[4]arene - 2H)].4py (.4py) and its treatment with the sodium salt of calix[8]arene led to the formation of the 1D polymer [U2(acac)6(calix[8]arene - 6H)(py)4Na4]n. The sandwich complex [Hpy]2[U(calix[4]arene - 3H)2][OTf].4py (.4py) was obtained by treatment of U(OTf)4 (OTf = OSO2CF3) with calix[4]arene in pyridine. All the complexes have been characterized by X-ray diffraction analysis.     

Molecular structure and vibrational spectra of three substituted 4-thioflavones by density functional theory and ab initio Hartree-Fock calculations

The vibrational frequencies of three substituted 4-thioflavones in the ground state have been calculated using the Hartree-Fock and density functional method (B3LYP) with 6-31G* and 6-31+G** basis sets. The structural analysis shows that there exists H-bonding in the selected compounds and the hydrogen bond lengths increase with the augment of the conjugate parameters of the substituent group on the benzene ring. A complete vibrational assignment aided by the theoretical harmonic wavenumber analysis was proposed. The theoretical spectrograms for FT-IR spectra of the title compounds have been constructed. In addition, it is noted that the selected compounds show significant activity against Shigella flexniri. Several electronic properties and thermodynamic parameters were also calculated.     

Conformational features of calix[4]arenes with alkali metal cations: A quantum chemical investigation with density functional theory

A variety of conformations for three model calix[4]arenes with 8 or 12 OH groups have been investigated by calculations at density functional (RI-BP86) and RI-MP2 level of approximation. The calixarenes form stable complexes with the alkali metal cations of lithium up to caesium. For the investigations all-valence electron basis sets as well as various effective core potentials were probed. The stabilities of complexes were analysed in comparison with the corresponding benzene complexes, M⁺·C₆H₆. The formation of the calixarene metal complexes is considered in two steps, (a) in a distortion from the equilibrium conformation of the free calixarenes and (b) subsequent complexation. The distortion energies are small for the ‘crown’ and larger for the ‘boat’ conformations. On the other hand the latter are more stabilized by significant interaction energy of the cation with two adjacent π-systems of the aromatic rings. As a result, these two conformations are of similar stabilities for K⁺ to Cs⁺ complexes with resorc[4]arenes, with a slight advantage for the ‘boat’ structure. The most stable conformation for the coordination products of these cations with the calix[4]arene with 12 OH groups is a slightly flattened ‘crown’ that is derived by maximum hydrogen bonding of the OH-groups and the most effective cation-π interactions. Special cases are complexes of Li⁺ and Na⁺ which in most instances prefer the coordination on the oxygen atoms of the upper rim of the calixarene cavities and thus form ‘boat’-like structures.     

Theoretical investigation of the molecular structure,vibrational spectra,and molecular docking of tramadol using density functional theory

The optimized molecular structures, harmonic vibrational wavenumbers, and the corresponding vibrational assignments of (1S,2S)-tramadol and (1R,2R)-tramadol are computationally examined using the B3LYP density functional theory method together with the standard 6–311++G(d,p) and def2-TVZP basis sets. The optimized structures show that phenolic rings of both 1R,2R and 1S,2S tramadol adopt planar geometry, which are slightly distorted due to the substitution at the meta-position; and the six-membered cyclohexane adopts a slightly distorted chair conformation. The 1S,2S enantiomer is energetically more favorable than 1R,2R with the energy differences of 1.32 and 1.03 kcal/mol obtained at B3LYP/6–311++G(d,p) and B3LYP/Def2-TVZP levels, respectively. The analysis of the binding pocket in the silico molecular docking with the m-opioid receptor shows that it originated two clusters with the 1S,2S enantiomer and one cluster with the 1R,2R enantiomer of tramadol. The results point to a more stable complex of the m-opioid receptor with the 1R,2R enantiomer of tramadol.     

Para-acyl calix[4]arenes: amphiphilic self-assembly from the molecular to the mesoscopic level

Studies of the properties of a series of amphiphilic calixarenes show that they can form stable monolayers, Langmuir-Blodgett layers and solid lipid nanoparticles, the mesostructures were investigated by atomic force microscopy and the crystal structure of one compound shows a partially interdigitated tilted bilayer structure.     

Direct access to upper rim substituted mono- and diaryloxy calix[4]arenes via bis(spirodienone) route

A seemingly ipso-like nucleophilic substitution of the upper rim of p-tert-butylcalix[4]arene is accomplished by an indirect method involving calix[4]arene derived bis(spirodienone). This method not only provides both mono and 1,3-diaryloxy calixarenes but also enables the synthesis of upper rim monothio substituted calix[4]arenes. A modification of the methodology can be successfully extended for the selective synthesis of mono- and 1,3-diquinone calix[4]arenes having free hydroxyl groups at the lower rim, in fewer steps.     

Synthesis of bis(bora)calix[4]arenes bearing perfluoroaryl substituents

New routes to perfluoroaryl complexes of bis(bora)calix[4]arenes are described; crystallographic and spectroscopic data are presented.