Oxygen reduction in acid media at the amorphous Mo–Os–Se carbonyl cluster coated glassy carbon electrodes

An amorphous Mo–Os–Se carbonyl cluster compound has been synthesized in 1,2-dichlorobenzene (b.p.≈180°C) to be tested as an electrocatalyst for molecular oxygen reduction in 0.5 M H₂SO₄. Scanning electron microscopy (SEM) and high-resolution transmission electron microscopy (HRTEM) performed for the powder supported on pyrolytic carbon show a distribution of nanometer-scale amorphous particles with agglomerations in cluster forms. The catalytic activity was studied by the rotating disc electrode technique. Kinetic studies show a first-order reaction with a Tafel slope of −0.118 V dec⁻¹ and dα/dT=1.55×10⁻³ K⁻¹. In the temperature range 298–343 K, an activation energy of 32 kJ mol⁻¹ was determined.     

Study on dynamic interfacial tension of 3-dodecyloxy-2-hydroxypropyl trimethyl ammonium bromide at liquid/liquid interface

Dynamic interfacial tension between aqueous solutions of 3-dodecyloxy-2-hydroxypropyl trimethyl ammonium bromide (R₁₂HTAB) and n-hexane were measured using the spinning drop method. The effects of the R₁₂HTAB concentration (the concentration below the CMC) and temperature on the dynamic interfacial tension have been investigated; the reason of the change of dynamic interfacial tension with time has been discussed. The effective diffusion coefficient, D_a, and the adsorption barrier, _a, have been obtained from the experimental data using the extended Word–Tordai equation. The results show that the dynamic interfacial tension becomes smaller while _a becomes higher with increasing R₁₂HTAB concentration in the bulk aqueous phase. D_a decreases from 5.56 × 10⁻¹² m⁻² s⁻¹ to 0.87 × 10⁻¹² m⁻² s⁻¹ while _a increases from 5.41 kJ mol⁻¹ to 7.74 kJ mol⁻¹ with the increase of concentration in the bulk solution of R₁₂HTAB from 0.5 × 10⁻³ mol dm⁻³ to 4 × 10⁻³ mol dm⁻³. Change of temperature affects the adsorption rate through altering D_a and _a. The value of D_a increases from 5.56 × 10⁻¹² m⁻² s⁻¹ to 13.98 × 10⁻¹² m⁻² s⁻¹ while that of _a decreases from 5.41 kJ mol⁻¹ to 5.07 kJ mol⁻¹ with temperature ascending from 303 K to 323 K. The adsorption of surfactant from the bulk phase into the interface follows a mixed diffusion–activation mechanism, which has been discussed in the light of interaction between surfactant molecules, diffusion and thermo-motion of molecules.     

Investigation of the spectral properties of a squarylium near-infrared dye and its complexation with Fe(III) and Co(II) ions

The spectral features of the squarylium near-infrared (NIR) dye NN525 in different solutions and its complexation with several metal ions were investigated. The absorbance maximum of the dye is λ=663 nm in methanol. This value matches the output of a commercially available laser diode (650 nm), thus making use of such a source practical for excitation. The emission wavelength of the dye in methanol is λ_em=670 nm. The addition of either Fe(III) ion or Co(II) ion resulted in fluorescence quenching of the dye. The Stern–Volmer quenching constant, K_SV, was calculated from the Stern–Volmer plot to be K_SV=2.70×10⁷ M⁻¹ for Co(II) ion. The K_SV value for Fe(III) ion could not be established due to the non-linearity of the Stern–Volmer plot and the modified Stern–Volmer plot for this ion. The detection limit is 6.24×10⁻⁸ M for Fe(III) ion and 1.55×10⁻⁵ M for Co(III) ion. The molar ratio of the metal to the dye was established to be 1:1 for both metal ions. The stability constant, K_S, of the metal–dye complex was calculated to be 3.14×10⁶ M⁻¹ for the Fe–dye complex and 2.64×10⁵ M⁻¹ for the Co–dye complex.     

The surfactant-sensitized analytical reaction of niobium with some thiazolylazo compounds

Cationic surfactants, such as cetylpyridinium bromide (CPB), sensitize the color reaction of Nb(V) with 1-(2-benzothiazolylazo)-2-hydroxy-3-naphthoic acid (I_a), 5-(benzothiazolylazo)2,5-naphthalenediol (I_b), 5-(2-benzothiazolylazo)8-hydroxyquinoline (I_c) and 4-(2- benzothiazolylazo)2, -biphenyldiol (I_d) reagents. The formation of a ternary complex of stoichiometric ratio 1:2:2 (Nb-R-CPB) is responsible for the observed enhancement in the molar absorptivity and the Sandell sensitivity of the formed complex, when a surfactant is present. The ternary complex exhibits absorption maxima at 649, 692, 661 and 612 nm, (=3.35×10⁴, 3.59×10⁴, 4.46×10⁴ and 2.79×10⁴ l mol⁻¹ cm⁻¹) on using reagent I_a, I_b, I_c, and I_d, respectively. Beer’s law is obeyed between 0.05 and 2.50 μg ml⁻¹, while applying the Ringbom method for more accurate results is in the range from 0.20 to 2.30 μg ml⁻¹. Conditional formation constants in the presence and absence of CPB for niobium complexes have been calculated. On the basis of a detailed spectrophotometric study, the nature of the chromophoric reagent–surfactant interaction and the peculiar features of the sensitization by CPB are discussed.     

Structure and properties of triclinic Ni0.85Mo6Te8

The structure of Ni_0.85Mo₆Te₈ was refined from single-crystal X-ray diffraction data at room temperature. It is triclinic, space group

Full-size image

; 1619 reflections, 75 refined parameters, R = 0.031. The Mo atoms form distorted octahedral clusters (2.69 Å ≤ d_intra[Mo---Mo] ≤ 2.81 Å; 3.58 Å < d_inter[Mo---Mo]). The Ni atoms are disordered (site occupancy: 0.423(7); d[Ni---Ni] = 2.586(6) Å), and interact strongly with one Mo₆ cluster (d[Ni---Mo] = 2.603(3) and 2.958(3) Å), and weakly with another (d[Ni---Mo] = 2.985(3) Å). The structure transforms at 1057(5) K into a rhombohedral modification (a_hex = 10.457(2) Å, c_hex = 11.866(3) Å at 1073 K). Measurements on powders suggest metallic conductivity (5.1 × 10⁻⁴ Ω-cm at 293 K) and weakly temperature-dependent paramagnetism (110 × 10⁻⁶ emu/g at 100 K).     

Recombination of KrD and XeD ions with electrons

Recombination rate coefficients of protonated and deuterated ions KrH⁺, KrD⁺, XeH⁺ and XeD⁺ were measured using Flowing Afterglow with Langmuir Probe (FALP). Helium at 1600 Pa and at temperature 250 K was used as a buffer gas in the experiments. Kr, Xe, H₂ and D₂ were introduced to a flow tube to form the desired ions. Because of small differences in proton affinities of Kr, D₂ and H₂ mixtures of ions, KrD⁺/D₃⁺ and KrH⁺/H₃⁺ are formed in the afterglow plasma, influencing the plasma decay. To obtain a recombination rate coefficient for a particular ion, the dependencies on partial pressures of gases used in the ion formation were measured. The obtained rate coefficients, α_KrD+(250 K) = (0.9 ± 0.3) × 10⁻⁸ cm³ s⁻¹ and α_XeD+(250 K) = (8 ± 2) × 10⁻⁸ cm³ s⁻¹ are compared with α_KrH+(250 K) = (2.0 ± 0.6) × 10⁻⁸ cm³ s⁻¹ and α_XeH+(250 K) = (8 ± 2) × 10⁻⁸ cm³ s⁻¹.     

Fluorescein labeling of estrogen for application of fluorescence polarization binding assays for antibody and receptor

The fluorescence polarization binding assay (FPBA) using fluorescein-labeled estrogen tracer is a homogeneous assay applicable to both estrogen antibody and estrogen receptor-binding assays. Two estrogen-ethylendiamine fluoresceinthiobamyl (E-EDF) tracers were synthesized; estrogen-6-EDF (E-6-F) derived from 6-ketoestradiol 6-(o-carboxymethyl) oxime and estrogen-17-EDF (E-17-F) was from 17β-estradiol 17-hemisuccinate. In both FPBAs using antibody and receptor, E-6-F tracer (Rf_365nm=0.58) showed a better binding response than E-17-F (Rf_365nm=0.70) indicating that the 17-position of estrogen seems to play an essential role as a binding site for antibody or receptor. In the optimized conditions of FPBA for E₂ using E-6-F tracer, antibody binding (K_d=9.4×10⁻⁹ M) is 50 times sensitive than receptor binding (K_d=4.6×10⁻⁸ M). Binding responses of estrogen and its related chemicals by FPBA indicate that antibody binding assay is able to screen the structural similarity of estrogen showing some response with methyltestosterone (K_i=2.1×10⁻⁵ M). On the other hand, the receptor assay is able to screen for estrogenic chemicals such as tamoxifen (K_i=4.5×10⁻⁹ M) and diethylstilbesterol (K_i=8.1×10⁻⁷ M). Therefore, E-6-F tracer is useful as a tracer for FPBA that is able to screen for chemicals structurally similar to estrogen using antibody, and that is able to screen for chemicals functionally similar to estrogen using receptor binding assay.     

The wettability of polytetrafluoroethylene by aqueous solution of cetylpyridinium bromide and propanol mixtures

Measurements of advancing contact angles (θ) were carried out for aqueous solutions of cetylpyridinium bromide (CPBr) and propanol mixtures at constant CPBr concentration equal to 1 × 10⁻⁵, 1 × 10⁻⁴, 6 × 10⁻⁴, 1 × 10⁻³ M, respectively, on polytetrafluoroethylene (PTFE). The obtained results indicate that the wettability of PTFE by aqueous solutions of these mixtures depends on their composition and concentration. In contrast to Zisman, there is no linear dependence between the cos θ and surface tension of aqueous solutions of CPBr and propanol mixtures (γ_LV), but a linear relationship exists between the adhesion tension and the surface tension of aqueous solutions of CPBr and propanol mixtures which have a slope equal to −1, and between cos θ and the reciprocal of the surface tension of solution. The slope equal to −1 and the intercept on the cos θ axis close to −1 suggest that adsorption of CPBr and propanol mixtures and the orientation of their molecules at aqueous solution–air and PTFE–aqueous solution interfaces are the same. This also suggests that the work of solution adhesion to the PTFE surface does not depend on the concentration of propanol and CPBr. Extrapolation of the straight line to the point corresponding to the surface tension of solution, which completely spreads over the PTFE surface, gives the value of the critical surface tension of PTFE wetting equal to 24.84 mN/m. This value is higher than PTFE surface tension (20.24 mN/m) and the values of the critical surface tension of PTFE wetting determined by other investigators from the contact angle of nonpolar liquids (e.g. n-alkanes). The differences between the value of the critical surface tension obtained here and those which can be found in the literature were discussed on the basis of the simple thermodynamic rules. Using the measured values of the contact angles and Young equation the PTFE–aqueous solution interfacial tension was determined. The values of PTFE–aqueous solution interfacial tension were also calculated from Miller and co-workers equation in which the correction coefficient of nonideality of the surface monolayer was introduced. From comparison of the obtained values it appears that good agreement exists between the values of PTFE–solution interfacial tension calculated on the basis of Young and Miller and co-workers equations in the whole range of propanol concentration.     

Voltammetric studies on the α-tocopherol anion and α-tocopheroxyl (Vitamin E) radical in acetonitrile

The α-tocopheroxyl radical was generated voltammetrically by one-electron oxidation of the α-tocopherol anion (E ^r_1/2=−0.73 V versus Ag|Ag⁺) that was prepared by reacting α-tocopherol with Et₄NOH in acetonitrile (with Bu₄NPF₆ as the supporting electrolyte). Cyclic voltammograms recorded at variable scan rates (0.05–10 V s⁻¹), temperatures (−20 to 20°C) and concentrations (0.5–10 mM) were modelled using digital simulation techniques to determine the rate of bimolecular self-reaction of α-tocopheroxyl radicals. The k values were calculated to be 3×10³ l mol⁻¹ s⁻¹ at 20°C, 2×10³ l mol⁻¹ s⁻¹ at 0°C and 1.2×10³ l mol⁻¹ s⁻¹ at −20°C. In situ electrochemical-EPR experiments performed at a channel electrode confirmed the existence of the α-tocopheroxyl radical.     

Spectrophotometric determination of vanadium in steel and alloys with 2-(5-chloro-2-pyridylazo)-5-dimethylaminophenol

Using spectrophotometric methods, the protopysis constant of the 5.ClDMPAP reagent (pK_a1 = −0.19; pK_a2 = 1.97; pK_a3 = 11.98) and the stability constant of its vanadic complex (6.0 ± 0.11) × 10¹⁴ were determined. A high-sensitivity spectrophotometric method was developed to determine V(V) using 0.1–1.2 ppm and pH = 3.8. ε₅₈₆ = 55,300 ± 400 liters · mol⁻¹ · cm⁻¹. A study on the most important interferences and the way to eliminate them was carried out. The method can be applied to the determination of the element in steels and ferrovanadiums.     

Evaluation of a chloramine-T-selective electrode for catalytic titration of silver and mercury(II) based on iodide-catalyzed chloramine-T reactions

Semiautomatic methods are described for the catalytic titrimetric determination of microamounts of silver and mercury(II) using a chloramine-T-selective electrode as monitor. The methods are based on the inhibitory effect of Ag(I) and Hg(II) on the iodide-catalyzed chloramine-T-arsenite and chloramine-T-H₂O₂ reactions. Microamounts of silver in the range 0.2–200 μg (1 × 10⁻⁷−1 × 10⁻⁴ M) and of mercury(II) in the range 0.1–200 μg (2.5 × 10⁻⁸−5 × 10⁻⁵ M) were determined using the chloramine-T-As(III) indicator reaction. Mercury(II) in the range 4–2000 μg (1 × 10⁻⁶−5 × 10⁻⁴ M) was also determined using the chloramine-T-H₂O₂ indicator reaction. The accuracy and precision were in the range 0.1–1%.     

Binding of 6-propyl-2-thiouracil to human serum albumin destabilized by chemical denaturants

We compared the binding affinity of 6-propyl-2-thiouracil (PTU) with native and destabilized human serum albumin (HSA) as a model to assess the binding ability of albumin in patients suffering from chronic liver or renal diseases. Urea (U) and guanidine hydrochloride (Gu·HCl) at a concentration of 3.0 M were used as denaturation agents.Increasing the concentration of PTU from 0.8 × 10⁻⁵ to 1.20 × 10⁻⁴ M in the systems with HSA causes a decrease in fluorescence intensity of the protein excited with both 280 and 295 nm wavelengths. The results indicate that urea and Gu·HCl bind to the carbonyl group and then to the NH-group. To determine binding constants we used the Scatchard plots. The presence of two classes of HSA–PTU binding sites was observed. The binding constants (K_b) are equal to 1.99 × 10⁴ M⁻¹ and 1.50 × 10⁴ M⁻¹ at λ_ex = 280 nm, 5.20 × 10⁴ M⁻¹ and 1.65 × 10⁴ M⁻¹ at λ_ex = 295 nm. At λ_ex = 280 nm the number of drug molecules per protein molecule is a_I = 1.45 and a_II = 1.32 for I and II binding sites, respectively. At λ_ex = 295 nm they are a_I = 0.63 and a_II = 1.54 for the I and II binding sites.The estimation of the binding ability of changed albumin in the uremic and diabetic patients suffering from chronic liver or renal diseases is very important for safety and effective therapy.     

Etude des propriétés de conduction électrique des polyphosphates: Li3Ba2(PO3)7, LiPb2(PO3)5, LiCs(PO3)2, et αLiK(PO3)2

The electrical conductivity of the crystallized polyphosphates Li₃Ba₂(PO₃)₇, LiPb₂(PO₃)₅, LiCs(PO₃)₂, and αLiK(PO₃)₂ has been determined at different temperatures by impedance spectroscopy. The conductivity, σ, spreads within a range of 1.59 × 10⁻⁸ to 1.79 × 10⁻⁷ S cm⁻¹ at 573 K, and from 1.71 × 10⁻⁵ to 9.86 × 10⁻⁴ S cm⁻¹ at 773 K. The transport should be assumed in the majority by the lithium ions with regard to the structural characteristics of these polyphosphates. The results are discussed and compared to the conductivity properties of other lithium ion conductors.     

3-(4-Tolylazo)phenylboronic acid as the active component of polyhydroxy compounds-selective electrodes

Ionophoric, extraction, acidic and hydrophobic properties of 3-(4-tolylazo)phenylboronic acid (TAPBA) were studied. Determined K_d value equals to 36±2, pK_a equals to 8.6±0.5. TAPBA extracts dobutamine from water into chloroform and transports it across a bulk chloroform membrane. The recovery is 83% (pH=7.5), the transport rate – (6.5±0.5)×10⁻⁷ mol/h. ¹H and ¹³C NMR data confirm the formation of an 1:1 complex between arylboronic acid and catecholamine. TAPBA was used as electrode-active component of plasticized membrane electrodes with cationic and anionic responses to catecholamines and phenolic acids, respectively. For the diethyl sebacate-plasticized membrane, a slope of electrode function to dobutamine is 56±2 mV/decade; the detection limit is 1.3×10⁻⁵ mol/l; the linear range – 5×10⁻⁵–1×10⁻² mol/l; the working pH-range – 4.8–7.6; the response time – 5–10 s. ISE gives incomplete cationic function to less lipophilic catecholamines. The membrane with cationic additive shows an anionic response to caffeic acid in wide pH range.     

Pulse radiolysis study of ion-species effects on the solvated electron in alkylammonium ionic liquids

The spectra and kinetic behavior of solvated electrons (e_sol⁻) in alkyl ammonium ionic liquids (ILs), i.e. N,N-diethyl-N-methyl-N-(2-methoxyethyl)ammonium bis(trifluoromethanesulfonyl)imide (DEMMA-TFSI), N,N-diethyl-N-methyl-N-(2-methoxyethyl)ammonium tetrafluoroborate (DEMMA-BF₄), N,N,N-trimethyl-N-propylammonium bis(trifluoromethanesulfonyl)imide (TMPA-TFSI), N-methyl-N-propylpiperidinium bis(trifluoromethanesulfonyl)imide (PP13-TFSI), N-methyl-N-propylpyrrolidinium bis(trifluoromethanesulfonyl)imide (P13-TFSI), and N-methyl-N-butylpyrrolidinium bis(trifluoromethanesulfonyl)imide (P14-TFSI) were investigated by the pulse radiolysis method. The e_sol⁻ in each of the ammonium ILs has an absorption peak at 1100 nm, with molar absorption coefficients of 1.5–2.3×10⁴ dm³ mol⁻¹ cm⁻¹. The e_sol⁻ decayed by first order with a rate constant of 1.4–6.4×10⁶ s⁻¹. The reaction rate constant of the solvated electron with pyrene (Py) was 1.5–3.5×10⁸ dm³ mol⁻¹ s⁻¹ in the various ILs. These values were about one order of magnitude higher than the diffusion-controlled limits calculated from measured viscosities. The radiolytic yields (G-value) of the e_sol⁻ were 0.8–1.7×10⁻⁷ mol J⁻¹. The formation rate constant of e_sol⁻ in DEMMA-TFSI was 3.9×10¹⁰ s⁻¹. The dry electron (e_dry⁻) in DEMMA-TFSI reacts with Py with a rate constant of 7.9×10¹¹ dm³ mol⁻¹ s⁻¹, three orders of magnitude higher than that of the e_sol⁻ reactions. The G-value of the e_sol⁻ in the picosecond time region is 1.2×10⁻⁷ mol J⁻¹. The capture of e_dry⁻ by scavengers was found to be very fast in ILs.     

Reactions of CO2 with H, H2 and deuterated analogues

Combining a temperature variable 22-pole ion trap with a cold effusive beam of neutrals, rate coefficients k(T) have been measured for reactions of CO₂⁺ ions with H, H₂ and deuterated analogues. The neutral beam which is cooled in an accommodator to T_ACC, penetrates the trapped ion cloud with a well-characterized velocity distribution. The temperature of the ions, T_22PT, has been set to values between 15 and 300 K. Thermalization is accelerated by using helium buffer gas. For reference, some experiments have been performed with thermal target gas. For this purpose hydrogen is leaked directly into the box surrounding the trap. While collisions of CO₂⁺ with H₂ lead exclusively to the protonated product HCO₂⁺, collisions with H atoms form mainly HCO⁺. The electron transfer channel H⁺ + CO₂ could not be detected (<20%). Equivalent studies have been performed for deuterium. The rate coefficients for reactions with atoms are rather small. Within our relative errors of less than 15%, they do not depend on the temperature of the CO₂⁺ ions nor on the velocity of the atoms (k(T) lays between 4.5 and 4.7 × 10⁻¹⁰ cm³ s⁻¹ with H as target, and 2.2 × 10⁻¹⁰ cm³ s⁻¹ with D). For collisions with molecules, the reactivity increases significantly with falling temperature, reaching the Langevin values at 15 K. These results are reported as k = α (T/300 K)^β with α = 9.5 × 10⁻¹⁰ cm³ s⁻¹ and β = −0.15 for H₂ and α = 4.9 × 10⁻¹⁰ cm³ s⁻¹ and β = −0.30 for D₂.     

Synthesis and structure analysis of tetragonal Li7La3Zr2O12 with the garnet-related type structure

We have successfully synthesized a high-purity polycrystalline sample of tetragonal Li₇La₃Zr₂O₁₂. Single crystals have been also grown by a flux method. The single-crystal X-ray diffraction analysis verifies that tetragonal Li₇La₃Zr₂O₁₂ has the garnet-related type structure with a space group of I4₁/acd (no. 142). The lattice constants are a=13.134(4) Å and c=12.663(8) Å. The garnet-type framework structure is composed of two types of dodecahedral LaO₈ and octahedral ZrO₆. Li atoms occupy three crystallographic sites in the interstices of this framework structure, where Li(1), Li(2), and Li(3) atoms are located at the tetrahedral 8a site and the distorted octahedral 16f and 32g sites, respectively. The structure is also investigated by the Rietveld method with X-ray and neutron powder diffraction data. These diffraction patterns are identified as the tetragonal Li₇La₃Zr₂O₁₂ structure determined from the single-crystal data. The present tetragonal Li₇La₃Zr₂O₁₂ sample exhibits a bulk Li-ion conductivity of σ_b=1.63×10⁻⁶ S cm⁻¹ and grain-boundary Li-ion conductivity of σ_gb=5.59×10⁻⁷ S cm⁻¹ at 300 K. The activation energy is estimated to be E_a=0.54 eV in the temperature range of 300–560 K.     

Positronium inhibition and quenching by organic electronic acceptors and charge transfer complexes

Positron lifetime measurements were performed on a series of organic electron acceptors and charge-transfer complexes in solution. The acceptors cause both positronium (Ps) inhibition (with maybe one exception) and quenching, but when an acceptor takes part in a charge-transfer complex the inhibition intensifies and the quenching almost vanishes. The reaction constants between ortho-Ps and the acceptors were determinded to be: 1.5 × 10¹⁰ M⁻¹ s⁻¹ for SO₂ in dioxane 3.7 × 10¹⁰ M⁻¹ s⁻¹ for SO₂ in n-heptane, 3.4 × 10¹⁰ M⁻¹ s⁻¹ for tetracyanoquinodimethane in tetrahydrofurane and 1.6 × 10¹⁰ M⁻¹ s⁻¹ for tetracyanoethylene in dioxane. From the ortho-Ps lifetimes in solutions containing charge-transfer complexes complexity constants were determined that were in reasonable agreement with constants obtained from optical data. The influence of acceptors and charge-transfers complexes on the Ps yield was interpreted in terms of the spur reaction model of Ps formation. Correlation was also made to gas phase reaction between electron acceptors and free electron, as well as to pulse radiolysis data.     

Potential-Dependent Rectified Electron Transfer at a Meldola′s Blue Incorporated Decanethiol-Modified Electrode as a Model of Biological Membrane

Meldola′s blue was immobilized into a self-assembled decanethiol monolayer modified on a gold electrode to provide a biological membrane model for electron transport having a molecular gate. Cyclic voltammograms of ferricyanide at this modified electrode showed only its reduction current at potentials where Meldola′s blue was reduced, but not at the redox potential of ferricyanide itself and no reaction was observed for ferrocyanide, indicating the direction of electron flow was controlled through the functionalized monolayer. Similar electrochemical responses were also observed for both octacyanotungustate and octacyanomolybdate. The cathodic peak currents observed in metal cyanide solutions at the modified electrode decreased in the order of Fe(CN)₆³⁻ > W(CN)₈³⁻ > Mo(CN)₈³⁻ at a given pH. From the analysis of the voltammograms using the microelectrode assembly model, the potential-dependent rectified electron flow was explained in terms of a gate function of Meldola′s blue in the monolayer, and the apparent electron transfer rate constant, k⁰_app, and the apparent diffusion coefficient, D_app, of metal cyanide ions in the monolayer were also estimated.     

EPR and optical absorption studies of Cr ions in d-gluconic acid monohydrate

EPR studies are carried out on Cr³⁺ ions doped in d-gluconic acid monohydrate (C₆H₁₂O₇·H₂O) single crystals at 77 K. From the observed EPR spectra, the spin Hamiltonian parameters g, |D| and |E| are measured to be 1.9919, 349 (×10⁻⁴) cm⁻¹ and 113 (×10⁻⁴) cm⁻¹, respectively. The optical absorption of the crystal is also studied at room temperature. From the observed band positions, the cubic crystal field splitting parameter Dq (2052 cm⁻¹) and the Racah interelectronic repulsion parameter B (653 cm⁻¹) are evaluated. From the correlation of EPR and optical data the nature of bonding of Cr³⁺ ion with its ligands is discussed.