碱熔-电感耦合等离子体原子发射光谱(ICP-AES)-内标法测定水泥标准物质中的氧化物含量

电感耦合等离子体原子发射光谱(ICP-AES)法与内标法的结合扩展了ICP-AES的分析范围。采用氢氧化钠熔融样品，ICP-AES-内标法测定各类水泥标准物质样品中SiO2、Al2O3、TFe2O3、MgO、TiO2等氧化物的含量。实验结果表明，标准物质测定值与标准值吻合，6次平行样品测定相对标准偏差小于1.4%。方法一次熔样，纵向测定主常量元素，操作简单，快速，准确，为水泥标准物质的研制提供了另一种定值方式。     

Validation study of the VitaKit A test kit for the determination of vitamin A in fluid milk (2% fat) for routine quality control. Performance Tested Method 061001

A validation study of VitaKit A for quantitation of total vitamin A in 2% fluid milk was carried out according to the guidelines provided by AOAC INTERNATIONAL. The VitaKit A was compared, in terms of repeatability and accuracy, with the U.S. Food and Drug Administration-Interstate Milk Shippers HPLC reference method for determination of total vitamin A in fluid milk with 2% fat. The data obtained by the VitaKit A method are in excellent agreement with the data obtained by the HPLC reference method. Further, a low LOD (0.33 international unit/mL) was obtained for the VitaKit A method; the presence of interferents, like cholesterol and vitamin D3, in the milk had minor influence on the quantitation of total vitamin A by the VitaKit A method. The VitaKit A test kit was found to be stable for 1 year from the date of manufacture when stored at 2-8 degrees C. The method requires 2 h processing time, compared to 1-2 days for the HPLC reference method. The results of this validation study clearly demonstrate that the VitaKit A method is reliable, rapid, and accurate for the quantitation of total vitamin A in fluid milk containing 2% milk fat. An independent study by Q Laboratories Inc., Cincinnati, OH, under the validation guidelines of AOAC INTERNATIONAL, confirmed these findings.     

镉溶液标准物质的研制

介绍镉溶液标准物质的研制过程。以高纯镉为原料,1%硝酸溶液为基体,利用重量–容量和一步稀释法制备镉溶液标准物质。分别采用F检验和回归曲线法对研制的标准物质进行均匀性和稳定性考察。采用电感耦合等离子体发射光谱法与国家一级标准物质比对定值,并对镉溶液浓度量值进行不确定度评定。利用原子吸收分光光度法和电感耦合等离子体发射光谱法对研制的标准物质与国家二级标准物质进行比对。结果表明,研制的镉溶液标准物质的定值结果为100μg/m L,相对扩展不确定度U_(rel)=1.0%(k=2)。该标准物质量值准确且具有溯源性。     

Accurate ab initio potential energy curve of F2. I. Nonrelativistic full valence configuration interaction energies using the correlation energy extrapolation by intrinsic scaling method

The recently introduced method of correlation energy extrapolation by intrinsic scaling (CEEIS) is used to calculate the nonrelativistic electron correlations in the valence shell of the F(2) molecule at 13 internuclear distances along the ground state potential energy curve from 1.14 A to 8 A, the equilibrium distance being 1.412 A. Using Dunning's correlation-consistent double-, triple-, and quadruple-zeta basis sets, the full configuration interaction energies are determined, with an accuracy of about 0.3 mhartree, by successively generating up to octuple excitations with respect to multiconfigurational reference functions that strongly change along the reaction path. The energies of the reference functions and those of the correlation energies with respect to these reference functions are then extrapolated to their complete basis set limits. The applicability of the CEEIS method to strongly multiconfigurational reference functions is documented in detail.     

Development of a mild mercaptoethanol extraction method for determination of mercury species in biological samples by HPLC–ICP-MS

A mild, efficient and convenient extraction method of using 2-mercaptoethanol contained extractant solution combined with an incubator shaker for determination of mercury species in biological samples by HPLC–ICP-MS has been developed. The effects of the concentration of 2-mercaptoethanol, the composition of the extractant solution and the shaking time on the efficiency of mercury extraction were evaluated. The optimization experiments indicated that the quantitative extraction of mercury species from biological samples could be achieved by using 0.1% (v/v) HCl, 0.1% (v/v) 2-mercapoethanol and 0.15% (m/v) KCl extractant solution in an incubator shaker for shaking overnight (about 12 h) at room temperature. The established method was validated by analysis of various biological certified reference materials, including NRCC DOLT-3 (dogfish liver), IAEA 436 (tuna fish), IAEA MA-B-3/TM (garfish filet), IAEA MA-M-2/TM (mussel tissue), GBW 08193 (bovine liver) and GBW 08572 (prawn). The analytical results of the reference materials were in good agreement with the certified or reference values of both methyl and total mercury, indicating that no distinguishable transformation between mercury species had occurred during the extraction and determination procedures. The limit of detection (LOD) for methyl (CH₃Hg⁺) and inorganic mercury (Hg²⁺) by the method are both as 0.2 μg L⁻¹. The relative standard deviation (R.S.D.s) for CH₃Hg⁺ and Hg²⁺ are 3.0% and 5.8%, respectively. The advantages of the developed extraction method are that (1) it is easy to operate in HPLC–ICP-MS for mercury species determination since the extracted solution can be directly injected into the HPLC column without pH adjustment and (2) the memory effect of mercury in the ICP-MS measurement system can be reduced.     

粉末压片X射线荧光光谱法与红外吸收光谱法联合测定萤石中各组分

采用粉末直接压片法,用X-射线荧光光谱法[1]测得萤石中Ca总量,Fe2O3,P,SiO2,K2O的含量,再用红外吸收光谱法测得样品中碳含量,换算得到CaCO3中的钙含量,进一步求得萤石中CaF2含量。此方法简便、准确。用9个标准物质制定了工作曲线,并进行了自测,另用该系列中5号样品(GBW07254)进行准确度和精密度测试,结果令人满意。     

氢化物—原子荧光光光谱法同时测定黄铜中的砷与锑

试样用硝酸－硫酸分解,试验了酸度、还原剂浓度以及黄铜中常见元素对测定结果的影响,砷、锑的回收率分别为：９６％～１０９％,９０％～９３％,砷、１锑的检出限分别为０．１９ｎｇ＝ｍＬ、０．３１ｎｇ＝ｍＬ,砷、锑的线性范围分别为０．５～２５０ｎｇ／ｍＬ、０．５～５００ｎｇ／ｍＬ。本法用于黄铜标准样品中的砷、锑。结果与标准值吻合。     

5-甲基吗啡-3-氨基-2-唑烷基酮标准物质的研制

研制了呋喃它酮的代谢产物5-甲基吗啡-3-氨基-2-唑烷基酮(AMOZ)的标准物质.采用红外光谱和液相色谱-质谱法对AMOZ进行了定性鉴定,建立并优化了用于AMOZ主成分定值的高效液相色谱-二极管阵列检测器法(HPLC-DAD)、气相色谱-氢火焰离子化检测器法(GC-FID)和差示扫描量热法(DSC).将卡尔费休法和热...     

甲基对硫磷溶液标准物质的研制

采用重量–容量法研制了1.00 ng/μL甲基对硫磷农药标准物质,对研制的甲醇中甲基对硫磷溶液标准物质量值进行了均匀性和稳定性检验,对定值结果的不确定度进行了评定。结果表明,该标准物质均匀性良好,在一年内量值没有显著性变化,具有良好的稳定性,定值结果的相对扩展不确定度为3%(k=2)。该标准物质可用于农药残留测量结果的准确性评价。     

Chiral discrimination of D- and L-amino acids using iodinated tyrosines as chiral references: Effect of iodine substituent

L-Tyrosine and iodinated L-tyrosines, i.e., 3-iodo-L-tyrosine and 3,5-diiodo-L-tyrosine, are successfully used as chiral references for the chiral discrimination of aliphatic, acidic, and aromatic amino acids. Chiral discrimination is achieved by investigating the collision-induced dissociation spectra of the trimeric complex [Cu(II)(ref)(2)(A) - H](+) ion generated by electro spraying the mixture of D- or L-analyte amino acid (A), chiral reference ligand (ref) and M(II)Cl(2) (M = Ni and Cu). The relative abundances of fragment ions resulted by the competitive loss of reference and analyte amino acids are considered for measuring the degree of chiral discrimination by applying the kinetic method. The chiral discrimination ability increases as the number of iodine atom increases on the aromatic ring of the reference and the discrimination is better with Cu when compared with Ni. A large chiral discrimination is obtained for aliphatic and aromatic amino acids using iodinated L-tyrosine as the reference. Computational studies on the different stabilities of the diastereomeric complexes also support the observed differences measured by the kinetic method. The suitability of the method in the measurement of enantiomeric excess over the range of 2% to 100% ee with relative error 0.28% to 1.6% is also demonstrated.