Synthesis and structure of mixed-metal thiolate complex Cp′Cr(CO)2(μ-SBu)Pt(PPh3)2: Side-on-coordination of Cr-S double bond with platinum

The reaction of [Cp′Cr(CO)₂(μ-SBu)]₂ (1) (Cp′ = MeC₅H₄) with (PPh₃)₂Pt(PhCCPh) gives Cp′Cr(CO)₂(μ-SBu)Pt(PPh₃)₂ (2) which could be regarded as a product of the substitution of acetylene ligand at platinum by a monomeric chromium-thiolate fragment. According to the X-ray diffraction analysis 2 contains single Cr-Pt (2.7538(15)) and Pt-S (2.294(2) Å) bonds while Cr-S bond (2.274(3) Å) is shortened in comparison with ordinary Cr-S bonds (2.4107(4)-2.4311(4) Å) in 1. The bonding between Cr-S fragment and platinum atom is similar to the olefine coordination in their platinum complexes.     

Reactions of the dichloroboryl complex of osmium, Os(BCl2)Cl(CO)(PPh3)2, with water, alcohols, and amines: Crystal structures of Os[B(OH)2]Cl(CO)(PPh3)2, Os[B(OEt)2]Cl(CO)(PPh3)2, and

A comprehensive calculations were carried out to get a deep insight into the ground- and excited-state electronic structures and the spectroscopic properties for a series of [Pt(4-X–trpy)CCC₆H₄R]⁺ complexes (trpy = 2,2′,6′,2″-terpyridine; X = H, R = NO₂ (1), Cl (2), C₆H₅ (3) and CH₃ (4); R = Cl, X = CH₃ (5) and C₆H₅ (6)). MP2 (second-order Møller–Plesset perturbation) and CIS (single-excitation configuration interaction) methods were employed to optimize the structures of 1–6 in the ground and excited states, respectively. The investigation showed that substituted phenylacetylide and trpy ligands only give rise to a small variation in geometrical structures but lead to a sizable difference in the electronic structures for 1–6 in the ground and excited states. The introduction of electron-rich groups into the phenylacetylide and/or terpyridyl ligands produces two different low-lying absorptions for 1 and 2–6, i.e., Pt(5d) → π^*(trpy) metal-to-ligand charge transfer (MLCT) mixed with π → π^*(CCPh) intraligand charge transfer (ILCT) for 1 and Pt(5d)/π(CCPh) → π^*(trpy) charge transfer (MLCT and LLCT) for 2–6. Remarkable electronic resonance on the whole Pt–CCPh–NO₂ moiety for 1 may be responsible for the difference. Solvatochromism calculation revealed that only LLCT/MLCT transitions showed the solvent dependence, consistent with the experimental observations.     

Theoretical studies upon the electronic structures and spectroscopic properties for a series of luminescent terpyridyl platinum(II) phenylacetylide complexes

A comprehensive calculations were carried out to get a deep insight into the ground- and excited-state electronic structures and the spectroscopic properties for a series of [Pt(4-X–trpy)CCC₆H₄R]⁺ complexes (trpy = 2,2′,6′,2″-terpyridine; X = H, R = NO₂ (1), Cl (2), C₆H₅ (3) and CH₃ (4); R = Cl, X = CH₃ (5) and C₆H₅ (6)). MP2 (second-order Møller–Plesset perturbation) and CIS (single-excitation configuration interaction) methods were employed to optimize the structures of 1–6 in the ground and excited states, respectively. The investigation showed that substituted phenylacetylide and trpy ligands only give rise to a small variation in geometrical structures but lead to a sizable difference in the electronic structures for 1–6 in the ground and excited states. The introduction of electron-rich groups into the phenylacetylide and/or terpyridyl ligands produces two different low-lying absorptions for 1 and 2–6, i.e., Pt(5d) → π^*(trpy) metal-to-ligand charge transfer (MLCT) mixed with π → π^*(CCPh) intraligand charge transfer (ILCT) for 1 and Pt(5d)/π(CCPh) → π^*(trpy) charge transfer (MLCT and LLCT) for 2–6. Remarkable electronic resonance on the whole Pt–CCPh–NO₂ moiety for 1 may be responsible for the difference. Solvatochromism calculation revealed that only LLCT/MLCT transitions showed the solvent dependence, consistent with the experimental observations.     

The Staudinger reaction of platinum(II)- and palladium(II)-coordinated 2-(azidomethyl)phenyl isocyanide. X-ray structure of trans-[PtCl{(H)}(PPh3)2][BF4] · CDCl3 · H2O

2-(Azidomethyl)phenyl isocyanide, 2-(CH₂N₃)C₆H₄NC (AziNC), coordinates to some cationic Pt(II) and Pd(II) species to afford isocyanide complexes of the type trans-[MCl(AziNC)(PPh₃)₂][BF₄] (M=Pt, l; Pd, 2). AziNC is coordinated also in some neutral Pt(II) and Pd(II) species such as [MCl₂(AziNC)₂] (M=Pt, 3; Pd, 4) derived from the reactions of 2 equiv. of AziNC with [PtCl₂(COD)] and [PdCl₂(MeCN)₂], respectively. Complexes 1 and 2 react with 1 equiv. of PPh₃ affording the heterocyclic carbene complexes trans-[MCl{(H)}(PPh₃)₂][BF₄] (M=Pt, 5; Pd, 6). Complexes 3 and 4 react with 1 equiv. of PPh₃ displacing the isocyanide with the formation of the complexes cis-[MCl₂(AziNC)(PPh₃)] (M=Pt, 7; Pd, 8). These latter ones react with 2 equiv. of PPh₃ affording as the final products the cationic carbene species trans-[MCl{(H)}(PPh₃)₂][Cl] (M=Pt, 9; Pd, 10). Complex 5 was also characterized by single crystal X-ray diffraction. The carbene complex is square-planar and the angle formed between the platinum square plane and the heterocyclic carbene ligand is 87.9(2)°. The C(1)-N(1) and C(1)-N(2) bond distances in the latter of 1.32(2) and 1.30(2) Å, respectively, are short for a single bond and indicate extensive π-bonding between the nitrogen atoms and the carbene carbon.     

On the reactivity of [IrCl(N2)(PPh3)2] with alkynylsilanes - A new route to vinylidene iridium(I) complexes

The iridium dinitrogen complex [IrCl(N₂)(PPh₃)₂] (1) was found to react with alkynylsilanes to form the vinylidene iridium(I) complexes trans- (R/R′ = Ph/Me, 2; Me/Me, 3; Bn/Me, 4; SiMe₃/Me, 5; SiEt₃/Et, 6; ⁱPr/Me, 7) and with Me₃SiCCC(O)R to yield the iridium η²-alkyne complexes trans-[IrCl{η²-Me₃SiCCC(O)R}(PPh₃)₂] (R = OEt, 9; Me, 11). Complex 9 was found to isomerize upon heating or upon UV irradiation yielding the vinylidene complex trans-[IrCl{CC(SiMe₃)CO₂Et}(PPh₃)₂] (10). The reaction of 1 with Me₃SiCCCCSiMe₃ yielded the complex trans-[IrCl{CC(SiMe₃)CCSiMe₃}(PPh₃)₂] (8), whereas with MeO₂CCCCO₂Me the iridacyclopentadiene complex [Ir{C₄(CO₂Me)₄}Cl(PPh₃)₂] (13) was formed. The complexes were characterized by means of ¹H, ¹³C and ³¹P NMR spectroscopy as well as by IR spectroscopy and microanalysis.     

Nucleophilic properties of Ru(CCH)(dppe)Cp∗: Synthesis and structure of Ru{c-CCArC(O)C(O)O}(dppe)Cp∗ [Ar = 2,4-(NO2)2C6H3]

The complex Ru{c-CCArC(O)C(O)O}(dppe)Cp∗ [Ar = 2,4-(NO₂)₂C₆H₃] 2, containing a dihydrofuran-3,4-dione ligand, was obtained from a reaction between the strong nucleophile Ru(CCH)(dppe)Cp∗ 1 and bis(2,4-dinitrophenyl) oxalate. The X-ray determined molecular structure of 2 is reported, together with a plausible route for its formation.     

Synthesis and characterisation of the platinum complexes [PtCl(CClPAr)(PPh3)2] and [PtCl(CClPAr′)(PPh3)2] as potential intermediates in the preparation of phosphaalkynes

Oxidative addition reactions of Cl₂CPR (R = 2,4,6-tris(trifluoromethyl)phenyl (Ar) or 2,6-bis(trifluoromethyl)phenyl (Ar′) with Pt(PPh₃)₄ yield the cis and trans (at platinum) complexes [PtCl(ClCPAr)(PPh₃)₂] and [PtCl(ClCPAr′)(PPh₃)₂]. All starting materials and intermediates have been characterised by NMR spectroscopy. The crystal and molecular structures of the trans-platinum complexes have been determined by single-crystal X-ray diffraction at low temperature.     

The designed synthesis and characterization of two novel heterometallic trinuclear incomplete cubane-like clusters [(CH3CH2)4N]{(M2CuS4)}(S2C2H4)2(PPh3) (M = Mo, W)

Two novel heterometallic trinuclear incomplete cubane-like clusters [(CH₃CH₂)₄N][{M₂CuS₄}(edt)₂(PPh₃)] (M = Mo, W) have been synthesized by reaction of [(CH₃CH₂)₄N]₂[M₂S₄(edt)₂] (M = Mo, W) with Cu(PPh₃)₂(dtp) [where edt is 1,2-ethane-dithiolato ligand, dtp is S₂P(OCH₂CH₃)₂⁻]. The two crystals are isomorphous in space group P1 (No. 1). The unit cell contains two independent molecules, but the two discrete anions have the same orientation for the PPh₃ ligands along one axis so the space group is undoubtedly non-centrosymmetric. The discrete anion contains two edt ligands and one PPh₃ ligand attached to one incomplete cubane-like cluster core {M₂CuS₄}³⁺ (M = Mo, W). The bond lengths of Mo---Mo[W---W] and the two Mo---Cu[W-Cu] are 2.852(2)[2.844(1)], 2.802(2)[2.765(3)], 2.760(2)[2.762(3)] Å, respectively. The M ₂S₄(edt)₂ (M = Mo, W) moiety remains almost unchanged, except that for the compound 1 the Mo=S double bond length elongates from av. 2.10 to av. 2.165 Å. The title clusters provide a new type of unsymmetric μ₂-bridging sulphido ligand. The incomplete cubane-like cluster core {Mo₂CuS₄}³⁺ of compound 1 is distorted because the two Cu---μ₂---S bond lengths are significantly different (2.313 Å and 2.409 Å), but the core {W₂CuS₄}³⁺ of compound 2 has approximately C_s symmetry. The IR spectra of the two title clusters and two starting materials are assigned.     

Theoretical investigation on possible mechanisms on regioselective formation of (η-siloxyallyl)tungsten complexes

Selective formation of (η³-siloxyallyl)tungsten complexes by reaction of hydrido(hydrosilylene)tungsten complexes with α,β-unsaturated carbonyl compounds was reported experimentally. The mechanisms have been investigated by employing the model reaction of [Cp(CO)₂(H)WSi(H)–{C(SiH₃)₃}] (R), derived from the original experimental complex Cp′(CO)₂(H)WSi(H)–[C(SiMe₃)₃] (1a, Cp′ = Cp*; 1b, Cp′ = η⁵-C₅Me₄Et), with methyl vinyl ketone, under the aid of the density functional calculations at the b3lyp level of theory. It is theoretically predicted that the route involving migration of the hydride to silicon to afford a 16e intermediate [Cp(CO)₂W–SiH₂–{C(SiH₃)₃}] is inaccessible (route 2), supporting the proposition by experiments. Another route, via [2 + 4] cycloaddition followed by directly Si–H reductive elimination, is theoretically predicted to be accessible (route 1). In route 1, two possible paths with different attacking directions of the oxygen of methyl vinyl ketone at Si (WSi) are put forward. The attack at the Si atom from the hydride (H1) side of the plane W–Si–H1 in R is found to be preferred kinetically. The regioselectivity for formation of (η³-siloxyallyl)tungsten complexes, where only the exo-anti isomer was obtained, is discussed based on the consideration of thermodynamics and kinetics.     

Syntheses and crystal structures of linear coordinated complexes of Ag with the ligands C(PPh3)2 and (HC{PPh3}2)

The cationic complexes [({Ph₃P}₂C)Ag(C{PPh₃}₂)]X (2⁺, X = Cl, BF₄) with a linear arrangement of the ligands were obtained from the reaction of C(PPh₃)₂ (1) with the appropriate AgX in THF. The ³¹P NMR spectrum of the cation 2⁺ exhibits a doublet with J(Ag,P) = 15.3 Hz. The cation was also formed when the adduct O₂C ← 1 was allowed to react with AgX in CH₂Cl₂ in the first step as shown by ³¹P NMR; however, deprotonation of the solvent finally produced the cation (HC{PPh₃}₂)⁺, (H1)⁺ quantitatively. In the absence of coordinating anions, the tricationic complex [({Ph₃P}₂CH)Ag(CH{PPh₃}₂)](BF₄)₃ (3), containing the cation (H1)⁺ as ligand, could be isolated by reacting AgBF₄ with the salt (H1)(BF₄). All compounds were characterized by IR and ³¹P NMR spectroscopy; the structures of the compounds [2]Cl·1.25THF, 3·5CH₂Cl₂, 3·4C₂H₄Cl₂, and (H1)(BF₄) could be established by X-ray analyses.     

Synthetic, X-ray structural and protonation studies of CpCr(CO)2SPy and CpCr(CO)2SPym (SPy = C5H4NS, SPym = C4H3N2S)

The facile reaction of [CpCr(CO)₃]₂ (Cp = η⁵-C₅H₅) (1) with one mole equivalent of 2,2′-dithiodipyridine ((C₅H₄NS)₂(SPy)₂) at ambient temperature led to the isolation of dark brown crystalline solids of CpCr(CO)₂(η²-SPy) (2) in ca. 72% yield. 2 undergoes quantitative conversion to CpCrCl₂(η¹-SPyH) (3) with HCl. The reaction 1 with one mole equivalent of 2-mercaptopyrimidine (C₄H₃N₂SHHSPym) at ambient temperature led to the isolation of reddish-brown crystalline solids of CpCr(CO)₂(η²-SPym) (4) and green solids of CpCr(CO)₃H (5) in yields of ca. 42% and 46%, respectively. Reaction of 4 with HCl and subsequent workup in acetonitrile resulted in the cleavage of the thiolate ligand, giving the 15-electron chromium(III) species CpCrCl₂(CH₃CN) (6) and free 2-mercaptopyrimidine. The complexes 2-4 have been determined by single X-ray diffraction analysis.     

Chelate structures of 5-(H/Br)-2-hydroxybenzaldehyde-4-allyl-thiosemicarbazones (H2L): Synthesis and structural characterizations of [Ni(L)(PPh3)] and [Ru(HL)2(PPh3)2]

The reactions of 5-R-2-hydroxybenzaldehyde-4-allyl-thiosemicarbazone {R: H (L¹); Br (L²)} with [M^II(PPh₃)nCl₂] (M = Ni, n = 2 and M = Ru, n = 3) in a 1:1 molar ratio have given stable solid complexes corresponding to the general formula [Ni(L)(PPh₃)] and [Ru(HL)₂(PPh₃)₂]. While the 1:1 nickel complexes are formed from an ONS donor set of the thiosemicarbazone and the P atom of triphenylphosphine in a square planar structure, the 1:2 ruthenium complexes consist of a couple from each of N, S and P donor atoms in a distorted octahedral geometry. These mixed-ligand complexes have been characterized by elemental analysis, IR, UV–Vis, APCI-MS, ¹H and ³¹P NMR spectroscopies. The structures of [Ni(L²)(PPh₃)] (II) and [Ru(L¹H)₂(PPh₃)₂] (III) were determined by single crystal X-ray diffraction.     

Novel M(II)–Hg(II) coordination polymers generated from metal-containing building blocks M(2-pyrazinecarboxylate)2 · (H2O)2 (M=Cu, Ni, Co) and HgCl2

A new class of M(II)–Hg(II) (M=Cu(II), Co(II), Ni(II)) mixed-metal coordination polymers, Cu(2-pyrazinecarboxylate)₂HgCl₂ (4), [Co(2-pyrazinecarboxylate)₂(HgCl₂)₂] · 0.61H₂O (5) and [Ni(2-pyrazinecarboxylate)₂(HgCl₂)₂] · 0.77H₂O (6), have been prepared by self assembly of metal-containing building blocks, M(2-pyrazinecarboxylate)₂ · (H₂O)₂(M=Cu(II), Co(II), Ni(II)), with HgCl₂. Compounds 4–6 were characterized fully by IR, elemental analysis and single crystal X-ray diffraction. Compound 4 crystallized in the monoclinic space group C2/c, with a=17.916(5) Å, b=7.223(2) Å, c=13.335(4) Å, β=128.726(3)°, V=1346.2(6) ų, Z=4. It contains alternating Hg(II) and Cu(II) metal centers that are cross-linked by 2-pyrazinecarboxylate spacers and chlorine co-ligands to generate a unique three-dimensional Hg(II)–Cu(II) mixed metal framework. Compound 5 crystallized in the triclinic space group P , with a=6.3879(7) Å, b=6.6626(8) Å, c=13.2286(15) Å, α=96.339(2)°, β=91.590(2)°, γ=113.462(2)°, V=511.71(10) ų, Z=1. Compound 6 also crystallized in the triclinic space group P , with a=6.3543(8) Å, b=6.6194(8) Å, c=13.2801(16) Å, α=96.449(2)°, β=92.263(2)°, γ=113.541(2)°, V=506.67(11) ų, Z=1. Compounds 5 and 6 are isostructural and in the solid state the Hg(II)M(II)Hg(II) units are connected by Hg₂Cl₂ linkages to produce a novel M(II)–Hg(II) (M=Co(II), Ni(II)) zigzag mixed-metal chain, in which a new type of M–M′–M′–M array was observed. The metal containing building blocks, M(2-pyrazinecarboxylate)₂ · (H₂O)₂ (M=Cu(II), Co(II), Ni(II)), exhibit different connectivities to HgCl₂ depending on the metal cation contained within them.     

Platinumolefin bond strength in Pt(PPh3)2(CH2CH2) and Pt(PPh3)2 {C(CN)2C(CN)2}

The enthalpy of the reaction: Pt(PPh₃)₂ (CH₂CH₂)(cryst.) + C(CN)₂C(CN)₂ (g) → Pt(PPh₃)₂ {C(CN)₂C(CN)₂}(cryst.) + CH₂ CH₂ (g) has been determined as ΔH₂₉₈=?155.8±8.0 kJ·mol^?1, from solution calorimetry. The interpretation, that the platinumethylene bond is much weaker than the platinumtetracyanoethylene bond, is contrary to conclusions drawn recently from electron emission spectroscopic studies, but in agreement with available structural data.     

Preparation and electrochemical behaviour of dinuclear platinum complexes containing NCN ligands (NCN=[C6H3(Me2NCH2)2-2,6]). The crystal structure of [C6H3(Me2NCH2)2-1,3-(CC)-5]2

A series of homodinuclear Pt compounds containing the anionic, potentially terdentate NCN ligand (NCN=[C₆H₃(Me₂NCH₂)₂-2,6]⁻) or its 4-ethynyl derivative were prepared. The two platinum centres are linked together in two different fashions: (i) directly linked by an ethynyl or diethynylphenyl group (head-to-head) and (ii) indirectly bonded by a ethynyl- or butadiynyl-linked bis-NCN ligand (tail-to-tail). The reaction of the head-to-head σ,σ′-ethynylide complex {Pt}CC{Pt} ({Pt}=[Pt(C₆H₃{CH₂NMe₂}₂-2,6)]⁺) with [CuCl]_n yields {Pt}Cl and [Cu₂C₂]_n, while with [Cu(NCMe)₄][BF₄] a Cu(I) bridged complex was formed: [(η²-{Pt}CC{Pt})₂Cu][BF₄]. The results of cyclic voltammetry experiments reveal that both connection modes of the two platinum centres lead to electrochemically independent Pt–NCN units. The X-ray crystal structure analysis of the neutral, tail-to-tail bridging butadiyne bis-NCNH ligand [C₆H₃(CH₂NMe₂)-1,3-(CC)-5]₂ is reported.     

Synthesis and structural characterisation of the oxo-rhenium(V) complexes with spirophosphorane derived bidentate ligand (PO). Crystal structure of trans-ReOCl2[OCMe2CMe2OP(OCMe2CMe2O)](PPh3)

The reactions of ReO(OEt)Cl₂L₂, L=py, PPh₃ or ReOCl₃(Me₂S)(OPPh₃), with spirohydrophosphorane HP(OCMe₂CMe₂O)₂ – abbreviated here as HPO – in toluene yield ReOCl₂(PO)L complexes, L=py (1), PPh₃ (2) and OPPh₃ (3), respectively. The encountered bidentate phosphite pinacolato (OCMe₂CMe₂O)POCMe₂CMe₂O⁻ ligand (PO⁻) is afforded by means of a spirophosphorane ring-opening reaction. All the pink–violet compounds 1–3 were characterised by NMR, IR and UV–Vis spectroscopies. The structure of trans-ReOCl₂(PO)PPh₃ (2) was determined crystallographically. The rhenium atom adopts distorted octahedral geometry with a trans multiply bonded terminal oxo ligand (Re–O_t=1.698(2) Å) trans to pinacolate oxygen (Re–O=1.880(2) Å). Two phosphorus atoms as well as two chlorides are mutually in a trans arrangement.     

A 2-iridathiophene from reaction between IrCl(CS)(PPh3)2 and Hg(CHCHPh)2

The thiocarbonyl analogue of Vaska’s compound is produced in high yield by first treating IrCl(CO)(PPh₃)₂ with CS₂ and methyl triflate to give [Ir(κ²-C[S]SMe)Cl(CO)(PPh₃)₂]CF₃SO₃ (1), secondly, reacting 1 with NaBH₄ to give IrHCl(C[S]SMe)(CO)(PPh₃)₂ (2), and finally heating 2 to induce elimination of both MeSH and CO to produce IrCl(CS)(PPh₃)₂ (3). When IrCl(CS)(PPh₃)₂ is treated with Hg(CHCHPh)₂ the novel 2-iridathiophene, Ir[SC₃H(Ph-3)(CHCHPh-5)]HCl(PPh₃)₂ (4) is produced. The X-ray crystal structure of the iodo-derivative of 4, Ir[SC₃H(Ph-3)(CHCHPh-5)]HI(PPh₃)₂ (5) confirms the unusual 2-metallathiophene structure. Treatment of IrCl(CS)(PPh₃)₂ with Hg(CHCPh₂)₂ produces both a coordinatively unsaturated 1-iridaindene, Ir[C₈H₅(Ph-3)]Cl(PPh₃)₂ (6) and a chelated dithiocarboxylate complex, Ir(κ²-S₂CCHCPh₂)Cl(CHCPh₂)(PPh₃)₂ (7). X-ray crystal structure determinations for 6 and 7 are reported.     

Intra- and intermolecular hydrogen bonds in [Ag(PPh3)3(HL)] complexes [H2L: H2xspa = 3(aryl)-2-sulfanylpropenoic acids; H2cpa = 2-cyclopentylidene-2-sulfanylacetic acid]

Compounds of the type [Ag(PPh₃)₃(HL)] {H₂xspa=3(aryl)-2-sulfanylpropenoic acids: x = Clp [3-(2-chlorophenyl)-], -o-mp [3-(2-methoxyphenyl)-], -p-mp [3-(4-methoxyphenyl)-], -o-hp [3-(2-hydroxyphenyl)-], -p-hp [3-(4-hydroxyphenyl-); H₂cpa = 2-cyclopentylidene-2-sulfanylacetic acid} were synthesized and characterised by IR and NMR (¹H ¹³C and ³¹P) spectroscopy and by FAB mass spectrometry. The crystal structures of [Ag(PPh₃)₃(HClpspa)], [Ag(PPh₃)₃(H-o-mpspa)], [Ag(PPh₃)₃(H-p-mpspa)] and [Ag(PPh₃)₃(Hcpa)] reveal the presence of discrete molecular units containing an intramolecular O-H···S hydrogen bond between the S atom and one of the O atoms of the COOH group. This intramolecular hydrogen bond remains in [Ag(PPh₃)₃(H-o-hpspa)]·EtOH and [Ag(PPh₃)₃(H-p-hpspa)] but in both cases polymeric structures are built on the basis of O-H···O interactions that involve the -OH substituent of the phenyl group of the sulfanylpropenoate fragment.     

Trifluoroacetylacetonate rhodium(III) methyl complexes, cis-[Rh(TFA)(PPh3)2(CH3)(L)][BPh4] and cis-[Rh(TFA)(PPh3)2(CH3)(I)] (L = CH3CN, NH3, pyridine), in comparison with their acetylacetonate analogs

The oxidative addition of CH₃I to planar rhodium(I) complex [Rh(TFA)(PPh₃)₂] in acetonitrile (TFA is trifluoroacetylacetonate) leads to the formation of cationic, cis-[Rh(TFA)(PPh₃)₂(CH₃)(CH₃CN)][BPh₄] (1), or neutral, cis-[Rh(TFA)(PPh₃)₂(CH₃)(I)] (4), rhodium(III) methyl complexes depending on the reaction conditions. 1 reacts readily with NH₃ and pyridine to form cationic complexes, cis-[Rh(TFA)(PPh₃)₂(CH₃)(NH₃)][BPh₄] (2) and cis-[Rh(TFA)(PPh₃)₂(CH₃)(Py)][BPh₄] (3), respectively. Acetylacetonate methyl complex of rhodium(III), cis-[Rh(Acac)(PPh₃)₂(CH₃)(I)] (5), was obtained by the action of NaI on cis-[Rh(Acac)(PPh₃)₂(CH₃)(CH₃CN)][BPh₄] in acetone at −15 °C. Complexes 1-5 were characterized by elemental analysis, ³¹P{¹H}, ¹H and ¹⁹F NMR. For complexes 2, 3, 4 conductivity data in acetone solutions are reported. The crystal structures of 2 and 3 were determined. NMR parameters of 1-5 and related complexes are discussed from the viewpoint of their isomerism.     

Reactivity of [CpCr(CO)3]2 towards thione (CS) moieties in some sulfur-containing substrates

The reaction of [CpCr(CO)₃]₂ (Cp = η⁵-C₅H₅) (1) with 1 mol equivalent of 2,5-dimercapto-1,3,4-thiadiazole (DMcTH₂) at ambient temperature led to the isolation of a reddish-brown crystalline solid of CpCr(CO)₃(η¹-DMcTH) (5) and a green solid of CpCr(CO)₃H (2) in yields of ca. 28% and 30%, respectively, along with some [CpCr(CO)₂]₂ (3) and [CpCr(CO)₂]₂S (4). The reaction of 1 with 1 mol equivalent of vinylene trithiocarbonate (SCS(CH)₂S) (VTTC) at 90 °C led to the isolation of a red crystalline solid of CpCr(CO)₂(η²-SCHSC₂H₂) (6) in ca. 15% yield while the reaction of 1 with isopropylxanthic disulfide ((CH₃)₂CHOCS₂)₂ resulted in the formation of CpCr(CO)₂(η²-S₂COCH(CH₃)₂) (8) in ca. 80% yield. The complexes 5, 6 and 8 have been determined by single crystal X-ray diffraction analysis.