Thermal properties and flammability of fibres made from polyimidoamide nanocomposite

The effects of basic fibre-forming parameters on the thermal properties and flammability of fibres from polyimidoamide (PIA) nanocomposite have examined. The comparative analysis of the properties of fibres from modified PIA and PIA nanocomposite has been conducted. The multi-functional fibres prepared from PIA nanocomposite show increased porosity and sorption properties as well as a high thermal stability and reduced flammability in comparison with fibres without MMT.     

Thermal stability and flammability properties of heterophasic PP-EP/EVA/organoclay nanocomposites

A study on the thermal behavior and flammability properties of the heterophasic polypropylene-(ethylene-propylene) copolymer (PP-EP)/poly(ethylene vinyl acetate) (EVA)/montmorillonite nanocomposite is presented. Nanoclay nanocomposites were prepared using a twin screw extruder. Both the fluidity of the EVA phase and compatibility conditions between PP-EP and EVA were used in order to obtain the required nanocomposites. Therefore, no additional compatibilizer was required to achieve the clay dispersion. Products exhibited the partially exfoliated/intercalated nanoclay dispersion. Thermogravimetric analyses indicated that nanoclays retard thermal degradation depending on nanoclay concentration. The retarding process was assigned to the exfoliation and dispersion of the silicate layers which impeded heat diffusion to the macromolecules. Thermal studies, under non-isothermal crystallization, indicated the lack of influence of nanoclay on the thermal behavior. Flammability characteristics were however affected by the nanoclay layers which overall generated flame retardation both in the EVA host and in the complex nanocomposites.     

Novel nanocomposite based on EVA/PHBV/[60]Fullerene with improved thermal properties

A novel nanocomposite was prepared from ethylene-co-vinyl acetate copolymer (EVA) and poly-3-hydroxy butyrate-co-valerate (PHBV) in combination with small amounts of [60]Fullerene (C₆₀). The thermal degradation as well as the incorporation effect of C₆₀ on the thermo-oxidative decomposition of EVA/PHBV/C₆₀ nanocomposites was investigated using thermogravimetric analysis (TGA). In order to assess the level of stabilization of nanocomposites, the oxidation induction time test was also determined. The obtained results indicated that the dispersion of C₆₀ even at low loading (0.3, 0.5 and 0.7 wt.%) exerts a significant increase on the thermal stability properties of nanocomposite. The oxidation induction time values of nanocomposites were remarkably increased with the increase of C₆₀ amounts. Surprisingly, the oxidation induction time of EVA/PHBV/C₆₀ (0.3 wt.%) is 1643 s higher than that of unfilled EVA/PHBV blend.The flammability properties investigated in pyrolysis combustion flow calorimetry (PCFC) showed that the addition of C₆₀ could prolong the time to peak of Heat Release Rate (pHRR) of around 30 °C compared to EVA/PHBV blend. It was demonstrated that C₆₀ is inhibitor of the thermal and thermo-oxidative degradation of EVA/PHBV blend.     

Nanocomposites of TiO 2 and Siloxane Copolymers as Environmentally Safe Flame-Retardant Materials †

Composites of titanium dioxide (TiO₂) nanoparticles and biocatalytically synthesized dimethylsiloxane copolyamides were prepared, and their thermal and flame-retardant properties were investigated. The flammability properties such as heat release capacity and total heat release were measured from microscale cumbustion calorimetry (MCC). The thermal degradation temperatures, char yields, and the heat-release capacities of these nanocomposites were significantly improved over the pure polymers. The heat-release capacities of the siloxane copolymer nanocomposites with 20wt% of TiO₂ were found to be 167 and 129 J/g K, which is a 35% less than the pure polymers (260 and 194 J/g K, respectively). The SEM/EDAX surface-analysis studies on nanocomposite films and their char revealed that nanocrystalline-TiO₂ plays an important role in forming carbonaceous silicate char on the surface as a protective layer.     

Flammability of macrocyclic polymers and their complexes with metals

The peculiarities of thermal degradation and the flammability of nitrogen-containing macrocyclic polymers have been investigated. It has been shown that the thermal and thermo-oxidative stability of these polymers depend on the structure of the macrocycle, the type of organic radicals of the main unit and the metal nature. The effect of the type of n-conjugated macromolecules, as well as of the planarity and symmetry of macrocycle, on thermal stability as well as flammability of macrocyclic polymers has been studied. Metals (Cu, Co, Ni) in the coordination sphere increase the thermal stability and decrease the thermo-oxidative degradation of macrocyclic polymers.     

Thermal degradation behaviors of a novel nanocomposite based on polypropylene and Co-Al layered double hydroxide

The thermal degradation behaviors of a novel nanocomposite based on polypropylene and organic Co/Al layered double hydroxide (PP/CoAl-LDH) were studied via thermogravimetric analysis (TGA) in the present work. The thermal degradation activation energies of the PP/CoAl-LDH nanocomposite were determined via Friedman and Flynn-Wall-Ozawa methods, and were compared with those of neat PP. The relationship between the organic CoAl-LDH concentration and the activation energies in PP/CoAl-LDH nanocomposite also has been investigated. An internal reason and an outer reason leading to high fire retardancy of PP/CoAl-LDH nanocomposite were proposed. The presence of CoAl-LDH tended to increase significantly the decomposition activation energy of nanocomposite at full-scale temperature and had an important influence on both of internal and outer reasons.     

Thermal degradation investigation of poly(ethylene terephthalate)/fibrous silicate nanocomposites

Based on the fibrous silicates (palygorskite, PT) organically modified by water-soluble polyvinylpyrrolidone (PVP), poly(ethylene terephthalate) (PET) nanocomposite with good dispersion of the PT nano-particles was prepared via in situ polycondensation. The thermal degradation behavior of PET and PET/PT nanocomposite was investigated by thermogravimetric analysis (TGA) under non-isothermal conditions at various heating rates in air and nitrogen, respectively. The apparent activation energies of the samples were evaluated by Kissinger and Flynn-Wall-Ozawa method. It is suggested that, during thermal decomposition in nitrogen, the clay as a mass-transport protective barrier can slow down degradation of polymer, but the catalytic effect of metal derivatives in clays may accelerate the decomposition behavior of PET. The combination of these two effects determines the final thermal stability of nanocomposite. However, in air atmosphere, the oxidative thermal stability of PET/PT nanocomposite was obviously superior to that of pure PET.     

Epoxy/polyhedral oligomeric silsesquioxane nanocomposites from octakis(glycidyldimethylsiloxy)octasilsesquioxane and small‐molecule curing agents

Epoxy/polyhedral oligomeric silsesquioxane (POSS) nanocomposites were obtained from octakis(glycidyldimethylsiloxy)octasilsesquioxane (OG) and diglycidyl ether of bisphenol A cured with small‐molecule curing agents of diethylphosphite (DEP) and dicyandiamide (DICY). An increase in the POSS contents of the nanocomposites and an improvement in the nanocomposite homogeneity were observed with the use of the small‐molecule curing agents. Phosphorus in DEP and nitrogen in DICY also performed synergism with POSS for thermal stability enhancement and flammability improvement in the nanocomposites. The nanocomposites possessing high OG contents exhibited good thermal stability, improved flammability, and high storage moduli. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 3825–3835, 2006     

Effect of montmorillonite content and the type of its modifier on the thermal properties and flammability of polyimideamide nanocomposite fibers

The effects of montmorillonite (MMT) content (1, 3, 5%) and the type of its modifiers on the thermal properties and flammability of PIA nanocomposite fibers have been assessed. Sodium montmorrilonite was modified with aminododecane acid and octadecylamine. Samples of PIA nanocomposite containing commercial MMT: Nanomer PGW from Nanocor were also included in the comparative analysis. It has been found that the glass transition temperature (T _g) of the fibers under investigation depends on the type of MMT’s modifier. On the other hand this parameter does not affect the thermal stability of fibers defined with T ₅ and T ₅₀ indicators since the thermal decomposition of modifiers takes place at lower temperatures.     

Thermal degradation analysis and XRD characterisation of fibre-forming synthetic polypropylene containing nanoclay

Flammability of synthetic fibres is significantly worse than that of bulk polymers because of the high surface area to volume ratio and the low tolerance to high filler loadings in the fibre production process. Introducing nanocomposite structures has the potential to enhance the char formation at relatively low loadings of nanoparticulate fillers and hence can reduce the flammability of synthetic polymers and fibres.This paper reports thermal degradation analysis results in conjunction with TG analysis under different atmospheres and further studies of X-ray diffraction characterisation of fibre-forming polypropylene containing selected dispersed nanoclays.The concentrations of hydrocarbons, carbon monoxide and carbon dioxide released during the TG analysis have been monitored and analysed by using a combined electrochemical infrared analyser. The intensity changes of the crystallinity peaks and nanoclay peaks in the polymer and composites are discussed.     

Effects of organoclay modifiers on the flammability, thermal and mechanical properties of polycarbonate nanocomposites filled with a phosphate and organoclays

Polycarbonate was melt blended with solid bisphenol A bis(diphenyl phosphate), and a series of organoclays. Effects of the organoclay modifiers on the flammability, thermal and mechanical properties of the nanocomposites were studied by limiting oxygen index, UL-94 burning test, thermogravimetric analysis, differential scanning calorimetry, tensile test and dynamic mechanical analysis. Although all the nanocomposites exhibit an intercalated-exfoliated morphology, they vary in the magnitude of intercalation revealed by X-ray diffraction and transmission electron microscopy. Flammability of the nanocomposites is strongly related to the thermal stability rather than the morphology. Glass transition temperature (T_g) and mechanical properties are controlled by both the morphology and the affinity of the organoclays with the matrix. The modifier containing hydroxyl moiety has stronger interactions with the matrix but it can promote its degradation, thus the corresponding nanocomposite exhibits a better intercalated morphology, higher T_g, superior strength and modulus however a worse thermal stability and flame retardancy. An additional silane within the organoclays would make the organoclays more compatible with the matrix but be a steric obstacle to the intercalation of the matrix chains; however, flame retardancy of the corresponding nanocomposite is enhanced due to the flame retardant nature of the silane. Similarly, the modifier bearing two long alkyl tails shows stronger affinity with the matrix than the one bearing a single tail, but it would hinder the intercalation due to the steric effect. These establishments between organoclay modifiers and the properties of nanocomposites might be guidance for developing materials with practical applications.     

The relationship between thermal degradation and flammability

The relationship between flammability and thermal degradation is the consequence of the burning cycle needed to sustain fire. Thermal degradation behaviour of polymers is discussed in relation to generation of fuel and other products, including flame quenchers, and the production of char. The thermal degradation behaviour of the main classes of fire retardant is considered and illustrated by examples of the ways in which specific fire retardants exert their effect on a particular polymer.     

Effect of rubber on properties of nylon-6/unmodified clay/rubber nanocomposites

Three nylon-6/unmodified clay/rubber nanocomposites with high toughness, high stiffness, high heat resistance and reduced flammability were studied in this paper, on basis of three compound powders of ultra-fine full-vulcanized powdered rubber (UFPR)/montmorillonite (UFPRM). It was found that all of the three UFPRs used in the study can help the silicate layers without organic treatment to be exfoliated in the nylon-6 matrix, despite some differences in compatibilities between them and nylon-6. Accordingly, the clay in different UFPRMs at the same loading content can lead to a similar improvement in stiffness and heat resistance of nanocomposites. In other words, UFPRs having different compatibilities with nylon-6 do not affect the stiffness and heat resistance of nanocomposites largely. However, the nylon-6 nanocomposites, modified with different UFPRMs, show different superior properties. Butadiene styrene vinyl-pyridine UFPRM (VP-UFPRM) is more effective in improving toughness of nylon-6. Nylon-6/silicone UFPRM (nylon-6/S-UFPRM) nanocomposite exhibits more reduced flammability, good flowability and high thermal stability. As for nylon-6/acrylate UFPRM (nylon-6/A-UFPRM) nanocomposite, it shows high toughness and thermal stability. Furthermore, the mechanism of unmodified clay exfoliation during the melt compounding and the effect of different UFPRs on the properties of the nylon-6/UFPRM nanocomposites are also discussed.     

Thermal stability and combustibility of butyl and halogenated butyl rubbers

The effects of flame retardants such as hydrated aluminium oxide, antimony trioxide and chloroparaffin on the thermal properties and flammability of sulphur vulcanizates of butyl and halogenated butyl elastomers were studied. The thermoanalytical curves of the elastomers were interpreted. Greater tendencies to thermal degradation were observed for halogenated butyl elastomers than for the original butyl rubber elastomer. This was confirmed by elastomer combustibility studies. The use of these flame retardants allowed the formation of self-extinguishing vulcanizates of the investigated elastomers.     

Study of nylon 66–clay nanocomposites via condensation polymerization

Nylon 66–clay (polyamide 66 (PA66)–organophilic montmorillonite (OMT)) exfoliated nanocomposites were synthesized based on nylon 66 salt and organoclay (OMT) modified by hydro-aminocaproic acid via condensation polymerization. And the nanocomposites were characterized by X-ray diffraction and transmission electronic microscopy. Exfoliated morphology with different clay content was obtained. The effects of cation exchange capacity and organic modified agent of OMT on the formation of exfoliated nanocomposites were investigated. It was shown that only suitable cation exchange capacity and organic modified agent could result in the formation of exfoliated morphology under the condition of condensation polymerization. The thermal and flammability properties of the nanocomposites were investigated through thermogravimetry and cone calorimetry experiments. Results indicate that the exfoliated nanocomposites have enhanced thermal stability and flame retardant properties compared with pure PA66.     

Thermal stability and flammability performance of polypropylene composites with silica pillared montmorillonites

In present work, silica pillared montmorillonite material (C‐SiO₂‐OMT) was prepared via the sol–gel method, and the influence of the powder on thermal stability and flammability performance of polypropylene (PP) composites was investigated. Characterization of C‐SiO₂‐OMT, elucidated with X‐ray diffraction, transmission electron microscopy, and N₂ adsorption–desorption, suggested that the powder had a mesoporous lamellar structure with high specific surface area and mesoporous volume. The formation of porous structure of C‐SiO₂‐OMT was more conducive than organically modified montmorillonite (OMT) to slowing the volatilization of pyrolytic products generated during thermal degradation process, which led to PP/C‐SiO₂‐OMT microcomposite show better thermal stability than PP/OMT nanocomposite at high temperature range. Flammability properties of these polymer materials evaluated by microscale combustion calorimetry, and cone calorimetry showed a contrary tendency, but C‐SiO₂‐OMT holds high promise to reduce the smoke yield. Copyright © 2013 John Wiley & Sons, Ltd.     

Thermal properties and microhardness of HDPE/clay nanocomposites compatibilized by different functionalized polyethylenes

The calorimetric characteristics, the flammability, the thermal stability and the microhardness of polyethylene high density/clay nanocomposites (HDPE/clay) have been studied by differential scanning calorimetry, thermogravimetry, determination of limiting oxygen index and microhardness tests. The nanocomposites have been compatibilized by ethylene–acrylic acid copolymer (EAA), acrylic acid grafted HDPE (HDAA) and maleic anhydride grafted HDPE (HDMA). The clay was montmorillonite Cloisite 15A. The influence of the presence and the type of the compatibilizers on the properties of the nanocomposites has been evaluated. The results have shown that the thermal stability, the reduction of the flammability and the microhardness of HDPE/clay nanocomposites, compatibilized by HDAA and HDMA are higher than those for nanocomposite compatibilized by EAA. Moreover, the presence and the type of compatibilizer have negligible effect on the characteristics of the HDPE phase transitions. These results have been interpreted by the better clay dispersion and higher level of clay exfoliation in the presence of compatibilizers HDAA and HDMA, than those in the presence of EAA compatibilizer.     

LDPE/Mg-Al layered double hydroxide nanocomposite: Thermal and flammability properties

Layered double hydroxides (LDHs) are new nanofillers which exhibit improved thermal and flammability properties in various kinds of polymer matrices. These materials have certain advantages over conventional metal hydroxides and also layered silicates so far as the flame retardancy is concerned. In this article, flammability and thermal properties of the nanocomposite based on low density polyethylene (LDPE) and Mg-Al based layered double hydroxide (Mg-Al LDH) are reported in detail. The nanocomposites containing different LDH concentrations were prepared by melt-compounding using a tightly intermeshing co-rotating twin-screw extruder. The morphological analysis reveals an exfoliated/intercalated type LDH particle morphology in these nanocomposites. The thermogravimetric analysis (TGA) shows that even a small amount of LDH improves the thermal stability and onset decomposition temperature in comparison with the unfilled LDPE. The heat release rate (HRR) and its maximum (PHRR) during cone-calorimeter investigation are found to be reduced significantly with increasing LDH concentration. The nanocomposites not only exhibit reduced total heat released (measure of propensity to produce long duration fire), but also lower tendency to fast fire growth (measured by the ratio of PHRR and time of ignition). The limited oxygen index (LOI) and the dripping behavior are also improved with increasing LDH concentration.     

Effects of magnesium oxide/hydroxide on flammability and smoke production tendency of polystyrene

Investigations have been carried out on the effects of magnesium oxide and magnesium hydroxide on the thermal degradation of polystyrene. The results have been correlated with the effects of the additives on the flammability of and smoke production from the polymer. Both metal compounds are extremely efficient smoke suppressants but neither is of much interest as a flame retardant on its own. The flammability of the system can be decreased by the use of brominated additives, but at the expense of a very heavy increase in smoke production. Ternary additive systems, containing also a different metal oxide, can be used to obtain a significant degree of flame retardance while retaining a high measure of smoke suppression. Interpretations are given of the action of the additives on the degradation of the polymer.     

Zero‐order kinetics of the thermal degradation of polypropylene/clay nanocomposites

The thermal degradation kinetics of polypropylene/clay microcomposites and nanocomposites were studied by thermogravimetric analysis. In comparison with pure polypropylene, the reaction order of the degradation of the composites became zero‐order, and the activation energy increased dramatically. The zero‐order kinetics were associated with the acidic sites (H⁺) created on the clay layers, whereas the increase in the activation energy was coupled with the shielding effect of clay. The kinetic analysis could provide additional mechanistic clues concerning the thermal stability and flammability of polymer/clay nanocomposites. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 3713–3719, 2005