Octadecyl silica membrane disks modified with a new Schiff's base for the preconcentration of lead and copper before their determination in water samples

A simple and fast method for the extraction and determination of ppt level of Pb2+ and Cu2+ ions using octadecyl-bonded silica membrane disks modified by a new tetradentates Schiffs base [Bis(2,4-dimethoxy benzaldehyde) ethylen diimine](TDSB) and inductively coupled plasma atomic emission spectrometry is described. Extraction efficiency, and influence of flow rate, pH, type and the least amount of acid for stripping of Cu2+ and Pb2+ from the modified disks and break through volume were evaluated. The maximum capacity of the membrane disks modified by 5 mg of TDSB used was found to be 347 +/- 7 and 470 +/- 6 microg of copper and lead, respectively. The concentration factor is 500 (for 2500 mL water sample and flow rate of 20 mL min(-1)) and detection limit of the proposed method is 12.5 and 150.5 pg/ml for Cu2+ and Pb2+, respectively. The method was applied to the determination of Cu2+ and Pb2+ ions from various water, wastewater, black tea, and hot pepper samples.     

Removal of Cu(II) and Pb(II) from Aqueous Solutions Using Nanoporous Materials

Russian Journal of Physical Chemistry A - The present work deals with the adsorption of Cu2+ and Pb2+ on zeolites (ZSM-5, mordenite) and mesoporous materials (MCM-48, MCM-41). The characterization...     

140Cu/MCM-41和14T2Cu/MCM-41的制备与表征

二氧四胺大环和取代二氧四胺大环化合物兼有大环氮杂冠醚和低聚肽的性质,能和很多过渡金属离子(Cu²⁺,Ni²⁺,Mn²⁺,Co²⁺等)形成具有特殊功能的配合物.如十四元二氧四胺大环Co(Ⅱ)配合物在-70℃加入过量的咪唑或吡唑后.     

Surface modification of MCM-41 and its application in DNA adsorption

Three types of MCM-41 absorbents, namely, Al~(3+)–MCM-41, La~(3+)–MCM-41, and Zn~(2+)–MCM-41, were prepared through amine grafting, phosphonate modification, and metal ion chelation and characterized by Fourier transform infrared spectroscopy, thermogravimetric analysis, and N2adsorption–desorption analysis. Results revealed that functionalized MCM-41 maintains the original structure of the molecular sieve and that the pore diameter and surface area are reduced compared with those of pure MCM-41. The adsorption behavior of DNA molecules on the surface of the modified molecular sieves was discussed according to the hard-soft acid–base(HSAB) principle. Experimental results showed that DNA purification could be effectively carried out on functionalized MCM-41 and that DNA is easily released by3–4 molL~(-1)NaCl solution. This study could be used as a general platform for future work on DNA adsorption and enrichment.     

Characterizations and Catalytic Properties of Transition Metal Ions Incorporated in Mesoporous Materials

Mesoporous materials typified by MCM-41 possess well-ordered mesoporous channels with controllable pore sizes from 2-30 nm, and are expected as desirable materials for catalysis.However, silicious mesoporous materials generally do not have sufficient intrinsic catalytic activities.Thus many studies have focused on introducing catalytically active sites. It is expected that different synthetic methods would result in different coordination structures of metal cations introduced in MCM-41, and thus different catalytic properties in catalytic reactions. The author's group has used two methods, i.e., direct hydrothermal synthesis (DHT) and template-ion exchange (TIE), for the syntheses of V-, Fe-, and Cr-MCM-41 and applied them as catalysts to selective oxidations of hydrocarbons. This paper highlights the characterizations of the coordination structures of these metal cations introduced into MCM-41 by the DHT and the TIE methods, and the structural-property relationships of these metal ion-containing MCM-41 materials in selective oxidation reactions.MCM-41 was prepared by hydrothermal synthesis using hexadecyltrimethylammonium bromide and sodium silicate as the sources of template and silicon, respectively. In the DHT method, metal cations were directly added into the synthesis gel before hydrothermal synthesis, while the exchanging of metal ions in ethanolic solutions with the template cations contained in the uncalcined MCM-41 was performed in the TIE method. XRD and N2-adsorption measurements showed that the mesoporous regularity was not destroyed with both synthetic methods for all the metal ion-containing MCM-41 with appropriate contents of metal cations.For V-MCM-41, the characterizations with mainly EXAFS suggested that V5+ cations were in tetrahedral coordination and mainly incorporated inside the framework of MCM-41 to substitute Si4+in the samples by the DHT method. Tetrahedrally coordinated Vanadyl species were also obtained by the TIE method, but the VO4 was dispersed on the wall surface of MCM-41. The V-MCM-41-DHT showed higher selectivity in the partial oxidations of C3H8 and i-C4H10 to alkenes and acrolein and methacrolein, but the V-MCM-41-TIE exhibited better catalytic activities in the partial oxidation of CH4 to HCHO and the oxidative dehydrogenation of C2H6.For Fe-MCM-41, EXAFS studies indicated that the DHT method also resulted in Fe3+ cations incorporated inside the framework of MCM-41 if iron content was lower than ca. 1 wt%. However,aggregated iron oxides with iron in octahedral coordination were mainly observed in the calcined Fe-MCM-41 by the TIE method. In the partial oxidation of CH4 to HCHO with O2 and the epoxidation of styrene with H2O2, the Fe-MCM-41 by the DHT method exhibits remarkably higher catalytic performances than that by the TIE method.Chromium could not be incorporated inside the framework of MCM-41 to substitute Si4+, and both synthetic methods led to surface chromate species. However, the DHT method resulted in only monochromate species on the wall surface of MCM-41 while polychromate species existed over the sample by the TIE method as indicated by the UV-Raman spectroscopic studies. The two types of Cr-MCM-41 exhibited distinctly different catalytic behaviors in the partial oxidation of CH4 with O2.The Cr-MCM-41-DHT was remarkably more selective towards HCHO formation.     

Optical spectra of a novel polyoxometalate occluded within modified MCM-41

The novel polyoxometalate ([(Eu2PW10O38)4(W3O8(H2O)2(OH)4)]22-), also referred to herein as Eu8P4W43, has been immobilized inside the channels of MCM-41 mesoporous molecular sieve material by means of the incipient wetness method. For proper host-guest interaction, amine groups were introduced into the system as a result of an aminosilylation procedure. A stable and integrated Eu8P4W43 polyoxometalate was shown to be formed inside the channels of the modified MCM-41. The products were characterized by XRD, UV-vis absorption, emission, Raman excitation, Raman, and 31P solid-state NMR measurements. Infrared and Raman spectra of the polyoxometalate/MCM-41 composite systems are interpreted as showing spectral shifts due to site induced electrostatic interactions. The photoluminescent behavior of the composite at room temperature indicates a characteristic Eu3+ emission pattern corresponding to 5D0- 7F(J) transitions. A strong photoluminescence suggests the potential utility of the polyoxometalate as a luminescent material.     

Adsorption Behavior for CO on Modified MCM—41 with Zn and CuCl

The Zn-Cu(I)/HMCM-41 catalysts were successfully prepared in laboratory scale by solid-state ion exchange with CuCl salt,together with introduction of Zn to improve the dispersion degree of the active component Cu(I) on the surface. With increase of the amounts of Zn and CuCl from 0% to 9.0% and 25.0% respectively, CO adsorption the amounts of increased from 10.6μmol/g to 183.0μmol/g correspondingly. The in situ FT-IR spectra for CO adsorption demonstrated that there existed two dynamic equilibriums between surface carbonyl complexes:Cu(CO)3^ ←→Cu(CO)2^ CO and Cu(CO)2^ ←→Cu(CO)^ CO.The equilibriums can be shifted reversibly by changing the temperature and pressure.Due to the modified MCM-41 mesoporous materials possess both of the acidic and metallic carbonyl centers, this kind of material can be developed into mesoporous bifunctional catalysts for carbonylation reactions, in which larger molecules are involved.     

Structural characterization and reactivity of UO2(salophen)L and [UO2(salophen)]2: dimerization of UO2(salophen) fragments in noncoordinating solvents (salophen = N,N'-disalicylidene-o-phenylenediaminate, L = N,N-dimethylformamide, dimethyl sulfoxide)

The molecular structures of UO2(salophen)L (L = DMF, DMSO) and a uranyl-salophen complex without any unidentate ligands (L) in solid and solution were investigated using single-crystal X-ray analysis and IR, 1H NMR, and UV-visible absorption spectroscopies. As a result, it was found that the uranyl-salophen complex without L is a racemic dimeric complex, [UO2(salophen)]2, in which the UO2(salophen) fragments are held together by bridging between one of the phenoxide oxygen atoms in salophen and the uranium in the other UO2(salophen) unit. Furthermore, it was spectrophotometrically demonstrated that [UO2(salophen)]2 retains its dimeric structure even in the noncoordinating solvents such as CH2Cl2 and CHCl3 and is in equilibrium with UO2(salophen)L {2UO2(salophen)L right arrow over left arrow [UO2(salophen)]2 + 2L}. The equilibrium constants and thermodynamic parameters of this equilibrium were evaluated from UV-visible absorption and 1H NMR spectral changes; log Kdim = -2.51 +/- 0.01 for L = DMF and solvent = CH2Cl2, log Kdim = -1.68 +/- 0.02 for L = DMF and solvent = CHCl3, log Kdim = -4.23 +/- 0.01 for L = DMSO and solvent = CH2Cl2, and log Kdim = -3.03 +/- 0.02 for L = DMSO and solvent = CHCl3. The kinetics of L-exchange reactions in UO2(salophen)L and enantiomer exchange of [UO2(salophen)]2 in noncoordinating solvents were also studied using NMR line-broadening method. As a consequence, it was suggested that the DMF-exchange reaction in UO2(salophen)DMF proceeds through two pathways (dissociative and associative paths) and that the predominant path of DMSO exchange in UO2(salophen)DMSO is the dissociative one. A sliding motion of the UO2(salophen) fragments was considered to be reasonable for the enantiomer-exchange mechanism of [UO2(salophen)]2. On the basis of the kinetic information for UO2(salophen)L and [UO2(salophen)]2, reaction mechanisms including the L-exchange reaction in UO2(salophen)L, the formation of [UO2(salophen)]2 from UO2(salophen)L, and the enantiomer exchange of [UO2(salophen)]2 are proposed.     

EuPO4:Zn@MCM-41的制备和发光性质

通过微波辅助水热法合成MCM-41介孔材料,经溶胶凝胶组装过程将EuPO4:Zn分散到MCM-41表面上和孔道中,制备成以MCM-41为基质的复合发光材料EuPO4:Zn@MCM-41粉末.通过XRD、FTIR、氮吸附、SEM、HRTEM、EDS对该材料进行了表征,用单因素法探究了原料配比(Eu(NO3)3、Zn(NO3)2的加入量和反应条件(煅烧的温度、时间)对EuPO4:Zn@MCM-41在593 am处发光强度的影响,并研究其影响机理.荧光分析发现,EuPO4:Zn基本不发射荧光,而EuPO4:Zn@MCM-41材料具有蓝光段和红光段的荧光发射,主要发光带以468和593 nm为中心.593 nm处的发射归因于Eu3+的4f组内5D0→7F1跃迁,即Eu3+中心离子所在品格格位对称性决定的磁偶极跃迁.研究表明以MCM-41为载体,能够大大降低颗粒的团聚程度,并使EuPO4:Zn颗粒具有更小的粒径:同时EuPO4:Zn@MCM-41中Eu3+发光巾心具有更大的裂分,MCM-41的纳米孔道使Eu3+的发光中心分离,降低了Eu3+之间电子云之间的重叠,大大减小了荧光的猝灭,因此MCM-41能有效降低Eu3+复合物荧光猝灭.     

A photometric study of the complexation reaction between Alizarin complexan and zinc(II), nickel(II), lead(II), cobalt(II) and copper(II)

The complexation reaction between Alizarin complexan ([3-N,N-di(carboxymethyl)aminomethyl]-1,2-dihydroxyanthraquinone; H(4)L) and zinc(II), nickel(II), lead(II), cobalt(II) and copper(II) has been studied by a spectrophotometric method. All these metal ions form 1:1 complexes with HL; 2:1 metal:ligand complex were found only for Pb(II) and Cu(II). The stability constants are (ionic strength I = 0.1, 20 degrees C): Zn(2+) + HL(3-) right harpoon over left harpoon ZnHL(-) log K +/- 3sigma(log K) = 12.19 +/- 0.09 (I = 0.5) Ni(2+) + HL(3-) right harpoon over left harpoon NiHL(-) log K +/- 3sigma(log K) = 12.23 +/- 0.21 Pb(2+) + HL(3-) right harpoon over left harpoon PbHL(-) log K +/- 3sigma(log K) = 11.69 +/- 0.06 PbHL(-) + Pb(2+) right harpoon over left harpoon Pb(2)L + H(+) log K approximately -0.8 Co(2+) + HL(3-) right harpoon over left harpoon CoHL(-) log K 3sigma(log K) = 12.25 + 0.13 Cu(2+) + HL(3-) right harpoon over left harpoon CuHL(-) log K 3sigma(log K) = 14.75 +/- 0.07 Cu(2+) + CuHL(-) right harpoon over left harpoon Cu(2)L + H(+) log K approximately 3.5 The solubility and stability of both the reagent and the complexes and the closenes of the values of the stability constants make this reagent suitable for the photometric detection of several metal ions in the eluate from an ion-exchange column.     

Distribution and properties of catalytically active Cu2+ sites in mesoporous MCM-41 modified with Al, Zr, or W ions

The surface of pure mesoporous SiO₂ with an MCM-41 structure has been modified by introducing Al, Zr, or W ions (1 mmol/g). The original and modified materials have been loaded with Cu²⁺ ions. The distribution, properties, and thermal stability of different Cu²⁺ sites have been studied by EPR and IR spectroscopy. The resulting catalysts have been tested for activity in ethane oxidation. The modification of original MCM-41 exerts a very strong effect on the stability of isolated Cu²⁺ ions on the support surface. Among the modified supports, Al-MCM-41 affords the highest thermal stability and degree of dispersion (70–80%) of the copper-containing phase. There is no correlation between the total number of surface Cu²⁺ sites and the catalytic activity. The specific catalytic activity (per Cu²⁺ ion accessible to the reactants) depends strongly on the local structure of the sites. The isolated pentacoordinated Cu²⁺ sites stabilized by the Al-MCM-41 surface show a comparatively high activity in the sample calcined at 520°C. The heat treatment of Cu/Al-MCM-41 at 650–750°C reduces the specific activity of the catalytic sites by a factor of ～20 without sintering the copper phase, as in the case of CuHZSM-5 zeolite. The least dispersed copper phase, which is observed in the original MCM-41 and likely consists of aggregates of weakly interacting Cu²⁺ ions, exhibits the highest specific activity and thermal stability. In the case of Cu/W-MCM-41, heat treatment causes both the sintering of copper particles and a decrease in the specific activity of the surface Cu²⁺ ions.     

Chemically modified silica gel with aminothioamidoanthraquinone for solid phase extraction and preconcentration of Pb(II), Cu(II), Ni(II), Co(II) and Cd(II)

Silica gel chemically bonded with aminothioamidoanthraquinone was synthesized and characterized. The metal sorption properties of modified silica were studied towards Pb(II), Cu(II), Ni(II), Co(II) and Cd(II). The determination of metal ions was carried out on FAAS. For batch method, the optimum pH ranges for Pb(II), Cu(II) and Cd(II) extraction were ≥3 but for Ni(II) and Co(II) extraction were ≥4. The contact times to reach the equilibrium were less than 10 min. The adsorption isotherm fitted the Langmuir's model showed the maximum sorption capacities of 0.56, 0.30, 0.15, 0.12 and 0.067 mmol/g for Pb(II), Cu(II), Ni(II), Co(II) and Cd(II), respectively. In the flow system, a column packed modified silica at 20 mg for Pb(II) and Cu(II), 50 mg for Cd(II), 60 mg for Co(II), Ni(II) was studied at a flow rate of 4 and 2.5 mL/min for Ni(II). The sorbed metals were quantitatively eluted by 1% HNO₃. No interference from Na⁺, K⁺, Mg²⁺, Ca²⁺, Cl⁻ and SO₄²⁻ at 10, 100 and 1000 mg/L was observed. The application of this modified silica gel to preconcentration of pond water, tap water and drinking water gave high accuracy and precision (%R.S.D. ≤ 9). The method detection limits were 22.5, 1.0, 2.9, 0.95, 1.1 μg/L for Pb(II), Cu(II), Ni(II), Co(II) and Cd(II), respectively.     

光沉积法合成纳米金属Pd负载的MCM-TiO2及其光催化性质研究

用光沉积方法由PdCl₄^2-和Ti修饰的MCM-41合成了纳米钯团簇Pd/MCM-TiO₂,用XPS,N₂吸脱附等温线,UV-Vis和Raman光谱对其结构进行了表征.将该团簇用于苯酚的光降解和Cr(Ⅵ)还原为Cr(Ⅲ)的反应中,表现出较高的光催化活性.     

Synthesis,characterisation and application of mercapto- and polyaminophenol-bifunctionalised MCM-41 for dispersive micro solid phase extraction of Ni(II) prio to inductively coupled plasma-optical emission spectrometry (DMSPE-ICP-OES)

Highly ordered adsorbent mesoporous silica (MCM-41) was synthesised using a rapid method and its subsequent chemical modification with 3-mercaptopropyltrimethoxysilane (MPTMS) in toluene medium at 60°C was performed. The electro-reduction product of 4-nitrophenol (EP4NP), as a new kind of polyaminophenol-type chelating agent with a high affinity to Ni(II), was then incorporated into MPTMS-MCM-41. The resulting materials (MCM-41, MPTMS-MCM-41 and EP4NP-MPTMS-MCM-41) were characterised by scanning electron microscopy, powder X-ray diffraction, nitrogen gas sorption and Fourier transform-infrared spectrometry. The new modified adsorbent EP4NP-MPTMS-MCM-41 was then employed for preconcentration of ultra-trace amounts of Ni(II) by dispersive micro solid phase extraction prior to inductively coupled plasma-optical emission spectrometry. The effects of variables such as pH, mass of the chelating agent, the amount of EP4NP-MPTMS-MCM-41, stirring time of extraction step, HCl concentration and stirring time during elution were optimised and the calibration curve was plotted. The limits of detection and quantitation were 0.006 and 0.019 μg L^?1, respectively. The mean, standard error and relative standard deviation for five replicates of 0.5 μg L^?1 Ni(II) were calculated to be 0.48 μg L^?1, 4.0% and 3.2%, respectively. The proposed method was successfully applied for determination of Ni(II) in wastewater samples.     

Simultaneous determination of Cu2+, Zn2+, Cd2+, Hg2+ and Pb2+ by using second-derivative spectrophotometry method

A new method of simultaneous determination of Cu2+, Zn2+, Cd2+, Hg2+ and Pb2+ is proposed here by using the second-derivative spectrophotometry method. In pH=10.35 Borax-NaOH buffer, using meso-tetra (3-methoxyl-4-hydroxylphenyl) porphyrin ([T-(3-MO-4-HP)P]) as chromomeric reagent, micelle solution was formed after Tween-80 surfactant was added into the solution containing Cu2+, Zn2+, Cd2+, Hg2+ and Pb2+ ions. The original absorption spectrum of the above complexes was obtained after heating in the boiling water for 25 min. The second-derivative absorption peaks of five metal-porphyrin complexes can be separated from the original absorption spectrum by using chemometric tool. In this way, Cu2+, Zn2+, Cd2+, Hg2+ and Pb2+ ions can be determined simultaneously. Under the optimal conditions, the linear ranges of the calibration curve were 0-0.60, 0-0.60, 0-0.40, 0-0.80 and 0-0.48 μg mL(-1) for Cu2+, Zn2+, Cd2+, Hg2+ and Pb2+, respectively. The molar absorptivity of these color systems were 1.38×10(5), 1.01×10(5), 3.24×10(5), 1.07×10(5) and 1.29×10(5)Lmol(-1)cm(-1). The method developed in this paper has advantages in selectivity, sensitivity, operation and can effectively resolve spectra overlapping problem. This method has been applied to determine the real samples with satisfactory results.     

Enhanced photocatalytic and adsorptive degradation of organic dyes by mesoporous Cu/Al2O3-MCM-41: intra-particle mesoporosity, electron transfer and OH radical generation under visible light

Mesoporous Cu/Al(2)O(3)-MCM-41 composite was synthesized by two step processes; in situ incorporation of high surface area mesoporous Al(2)O(3) (MA) into the framework of MCM-41 (in situ method) followed by impregnation of Cu(II) by incipient wetness method. The interesting thing is that starch was used for the first time as template for the preparation of high surface area MA. To evaluate the structural and electronic properties, these catalysts were characterized by low angle X-ray diffraction (LXRD), X-ray photoelectron spectroscopy (XPS), transmission electron microscopy (TEM), UV-vis DRS, FTIR and photoluminescent (PL) spectra. The various cationic dye such as methylene blue (MB), methyl violet (MV), malachite green (MG) and rhodamine 6G (Rd 6G) of high concentration 500 mg L(-1) were degraded and adsorbed very efficiently (100%) using the 5 Cu/Al(2)O(3)-MCM-41 composite within 30 and 60 min, respectively. The high and quick removal of such concerted cationic organic dyes and also mixed dyes (MB+MV+MG+Rd 6G) by means of photocatalysis/adsorption is basically due to the combined effect three characteristics of synthesized mesoporous 5 Cu/Al(2)O(3)-MCM-41 composite. These characteristics are intra-particle mesoporosity, electron transfer and ˙OH radical generation under solar light.     

Preparation and Spectroscopic Properties of Tris(2,2′-bipyridine)ruthenium(Ⅱ) Loaded in Siliceous Mesoporous MCM-41

[Ru(bpy)3]2+/MCM-41 composite material obtained by loading tris(2,2′-bipyridine)ruthenium(Ⅱ)([Ru(bpy)3]2+) in siliceous mesoporous MCM-41 was characterized by X-ray powder diffraction, UV-Vis absorption and emission spectroscopies. The absorption spectrum of [Ru(bpy)3]2+/MCM-41 is similar to that of [Ru(bpy)3]2+ aqueous solution, whereas its emission spectrum exhibits hypsochromic shift compared to the solution spectrum. On the other hand, the peak position of the emission spectrum of [Ru(bpy)3]2+/MCM-41 shifts towards longer wavelength when the loading amount increases.     

Evaluation of a carbon paste electrode modified with organofunctionalised SBA-15 nanostructured silica in the simultaneous determination of divalent lead, copper and mercury ions

The performance of a carbon paste electrode (CPE) modified with SBA-15 nanostructured silica organofunctionalised with 2-benzothiazolethiol in the simultaneous determination of Pb(II), Cu(II) and Hg(II) ions in natural water and sugar cane spirit (cacha?a) is described. Pb(II), Cu(II) and Hg(II) were pre-concentrated on the surface of the modified electrode by complexing with 2-benzothiazolethiol and reduced at a negative potential (-0.80 V). Then the reduced products were oxidised by DPASV procedure. The fact that three stripping peaks appeared on the voltammograms at the potentials of -0.48 V (Pb2+), -0.03 V (Cu2+) and +0.36 V (Hg2+) in relation to the SCE, demonstrates the possibility of simultaneous determination of Pb2+, Cu2+ and Hg2+. The best results were obtained under the following optimised conditions: 100 mV pulse amplitude, 3 min accumulation time, 25 mV s(-1) scan rate in phosphate solution pH 3.0. Using such parameters, calibration graphs were linear in the concentration ranges of 3.00-70.0 x 10(-7) mol L(-1) (Pb2+), 8.00-100.0 x 10(-7) mol L(-1) (Cu2+) and 2.00-10.0 x 10(-6) mol L(-1) (Hg2+). Detection limits of 4.0 x 10(-8) mol L(-1) (Pb2+), 2.0 x 10(-7) mol L(-1) (Cu2+) and 4.0 x 10(-7) mol L(-1) (Hg2+) were obtained at the signal noise ratio (SNR) of 3. The results indicate that this electrode is sensitive and effective for simultaneous determination of Pb2+, Cu2+ and Hg2+ in the analysed samples.     

Metal-Chelate Immobilization of Lipase onto Polyethylenimine Coated MCM-41 for Apple Flavor Synthesis

An enzyme immobilized on a mesoporous silica nanoparticle can serve as a multiple catalyst for the synthesis of industrially useful chemicals. In this work, MCM-41 nanoparticles were coated with polyethylenimine (MCM-41@PEI) and further modified by chelation of divalent metal ions (M = Co²⁺, Cu²⁺, or Pd²⁺) to produce metal-chelated silica nanoparticles (MCM-41@PEI-M). Thermomyces lanuginosa lipase (TLL) was immobilized onto MCM-41, MCM-41@PEI, and MCM-41@PEI-M by physical adsorption. Maximum immobilization yield and efficiency of 75 ± 3.5 and 65 ± 2.7% were obtained for MCM@PEI-Co, respectively. The highest biocatalytic activity at extremely acidic and basic pH (pH = 3 and 10) values were achieved for MCM-PEI-Co and MCM-PEI-Cu, respectively. Optimum enzymatic activity was observed for MCM-41@PEI-Co at 75 °C, while immobilized lipase on the Co-chelated support retained 70% of its initial activity after 14 days of storage at room temperature. Due to its efficient catalytic performance, MCM-41@PEI-Co was selected for the synthesis of ethyl valerate in the presence of valeric acid and ethanol. The enzymatic esterification yield for immobilized lipase onto MCM-41@PEI-Co was 60 and 53%, respectively, after 24 h of incubation in n-hexane and dimethyl sulfoxide media.

Open image in new window

Graphical Abstract Divalent metal chelated polyethylenimine coated MCM-41 (MCM-41@PEI-M) was used for immobilization of Thermomyces lanuginosa lipase catalyzing green apple flavor preparation

     

Speciation of CuO in MCM-41 during oxidation of naphthalene

By extended X-ray absorption fine structural (EXAFS) spectroscopy, copper oxide clusters with a square-plane structure are found in the channels of mesoporous molecular sieve MCM-41. Bond distances of Cu–O and Cu–Cu are 1.90 and 2.80 Å, respectively. Oxidation of naphthalene at 723 K for 4 h in MCM-41 leads to structural perturbation of the clusters (e.g., Cu–O: −0.02 Å and Cu–Cu: +0.02 Å) with little change in their coordination numbers.