Mass spectral correlations of halogenated 1,1,1,3,3,3-hexafluoropropanes and 1,1,1-trifluoroethanes

The mass spectral fragmentation patterns at 20 eV of twelve compounds of the type CF₃CXYCF₃ (X, Y =F, Cl, Br, I, H) and five compounds of the type CF₃ CX₂ Y (X, Y= F, Cl, Br) were analyzed. It was noted that the frequency of carbon–helogen and carbon–carbon bond cleavage was quite dependent on the substituents X and Y.     

Nitroxide chemistry. Part XVII [1]. Reaction of bistrifluoromethyl nitroxide with some halogenoalkanes and related alkenes

The mono (bistrifluoromethylamino-oxy)alkanes (CF₃)₂NOCXYZ (X = Y = F, Z = Cl; X = H, Y = F or Cl, Z = CH₃; X = Y = F, Z = CH₃; X = H, Y = Cl or Br, Z = CF₃; X = Cl, Y = Br, Z = CF₃) have been synthesised by treatment of appropriate halogenoalkanes, CHXYZ, with bistrifluoromethyl nitroxide. The 1,2-bis(bistrifluoromethylamino-oxy)alkanes (CF₃)₂NOCH₂CXYON(CF₃)₂ were obtained as by-products in the reactions involving the ethanes CH₃CHXY (X = H, Y = F or Cl; X = Y = F); these products, like their analogues (CF₃)₂NOCHFCF₂ON(CF₃)₂ and (CF₃)₂NOCH₂CCl₂ON(CF₃)₂, were also prepared $\text{via}$ attack of bistrifluoromethyl nitroxide on the corresponding ethenes.     

Darstellung und charakterisierung von (CF3)2PPH2 und (CF3)2AsPH2

(CF₃)₂EPH₂ (E = P,As) may be prepared in high yield by the cleavage of M-P bonds in compounds of the type R₃MPH₂ (M = Si, Ge, Sn) with (CF₃)₂EX (X = Cl, Br, I). The direction of bond fission depends on X and on the reaction temperature. These new compounds may also be obtained, but in lower yield, by the reaction of LiAl(PH₂)₄ with (CF₃)₂EX. Application of the principle of this reaction to other R′₂EX compounds [(CH₃)₂PCl, (CH₃)₂AsI, F₂PX (X = Br, I)] has been investigated. The IR and NMR spectra of the new compounds are reported.     

Electrochemical and Chemical Syntheses of Trifluoromethylating Reagents and Trifluoromethyl Substituted Compounds

The electroreduction of the halofluoromethanes CF₃Br, CF₂Br₂ and CF₂BrCl has been studied in high‐pressure stainless steel autoclaves at different cathodes [Pt, steel (V2A, V4A), glassy carbon (GC)] and in various solvent‐supporting electrolyte systems (SSE), e.g. DMF/[Bu₄N]Br, NMP/[Bu₄N]BF₄ etc. The reduction potentials for CF₃Br increase from Pt (–1.6 V) < V2A (–1.8 V) < GC (–2.1 V) and are lower for CF₂Br₂ and CF₂BrCl suggesting a reductive cleavage of C‐X bonds as the first step. CF₂Br₂ and CF₂BrCl show a two‐step reduction in accord with the C–X bond energies (C–F > C–Cl > C–Br) and the “Perfluoro‐effect”. The electrolysis of CF₃Br in different SSE‐systems with sacrificial zinc or cadmium anodes has been reinvestigated with our experimental set‐up to elucidate the influence of the experimental conditions on the type and ratio of the products. The observed products CF₃MBr·42L and (CF₃)₂M·42L (M = Zn, Cd; L = DMF or AN) are the same as in the previous investigations, but are obtained in different ratios, as a rule caused by a parallel chemical corrosion of the respective anodes. By using aluminium as sacrificial anode no CF₃Al compounds are formed. The CF₃ species generated by electroreduction of CF₃Br react with the solvents via hydrogen abstraction and formation of CF₃H. The current yield with respect to the dissolution of the Al anode reaches 120 % indicating a considerable chemical corrosion in addition to the anodic oxidation. This result enabled a one‐pot trifluoromethylation reaction of NMP as organic carbonyl substrate and solvent with CF₃Br and aluminium powder (ratio 3 : 2) at higher temperatures (> 70 °C). The complete reaction of CF₃Br to give CF₃H and 1‐methyl‐2‐trifluoromethyl‐4,5‐dihydropyrrol allowed the isolation of the latter by vacuum condensation and distillation in 45 % yield, rel. to the CF₃Br used. Gallium and indium were also applied as sacrificial anodes in combination with CF₃Br as substrate. In both cases, anodic current yields of about 280 % indicated an extreme chemical corrosion together with cathodic metal depositions corresponding to the cathodic current yield. These deposits – in contrast to those of Zn and Cd – do not react with CF₃Br in Grignard‐type conversions to CF₃Ga and CF₃In compounds. So, the observed products (CF₃)_nMBr_3–n·L (M = Ga, In; n 1‐3; L = DMF, NMP) are obviously formed by chemical corrosion of the electro‐activated anodes. Finally, electrochemical and chemical trifluoromethylations were successfully carried out, using R₃SiCl (R = Me, Vi, Ph), Me₃M′Cl (M′ = Ge, Sn) and aluminium anodes or Al‐powder. The products were characterized either after isolation or in the product solutions by NMR‐spectroscopic investigations.     

Synthese et reactivite d'organomagnesiens perfluores. V.[1] Synthese et identification de nouveaux composes perfluoroalkyles du mercure a chaine longue.

The reaction of mercuric salts HgY₂ or organic mercuric compounds R_HHgX with long chain perfluorinated Grignard reagents R_FMgBr leads to a series of new perfluoroalkyl mercury derivatives with the general formula R_FHgZ (R_F=C₄F₉, C₆F₁₃, C₈F₁₇ ; Z=R_F,R_H,Y with Y = I,Br,Cl, NO₃,OCOCH₃,OCOCF₃).The synthesis of these organomercuric compounds is described, and their spectroscopic properties are reported.     

Polyfluorinated radical cations

The synthesis of the first trifluoromethanesulfonate esters of the type CF₃SO₃(CH₂)_nO₃SCF₃ (n=1,2,3) are reported. The new compounds are prepared from Cl(CH₂)_nCl by substitutive electrophilic dehalogenation reactions with CF₃SO₂OX (x=Cl,Br). The extension of this reaction to HCCl₃ results in HC(O₃SCF₃)₃ but the compound is unstable at 22°.     

On the effect of low-energy ion bombardment on polystyrene and polymethylmethacrylate etch rates in rf plasmas

The effect of low-energy ion bombardment on CD₄/O₂ and CF₃X (X=F, Cl, Br) plasma etching has been assessed by applying controlled rf bias voltages on polystyrene (PS) and polymethylmethacrylate (PMMA) samples. In both cases ion bombardment has been found to have a chemical effect. In the case of CF₄/O₂ discharges, ion bombardment has been found to change the relative etching efficiency of different mixtures. In the case of CF₃X plasmas, ion bombardment has been found to alter PMMA and PS etch rates in a different way. In particular, the ratios between CF₄ and CF₃X (X=Cl, Br) etch rates of PS have been found to decrease with increasing bias voltage. This effect has been tentatively attributed to an ion bombardment-induced enhancement of the reaction between the aromatic ring and halogen molecules formed in CF₃Cl and CF₃Br discharges.     

Physikalische und spektroskopische daten von trifluormethylselenol und derivaten

The characterization of the compounds CF₃SeX (X = H, Cl, Br, CN, CF₃, SeCF₃) is completed by the report of melting points, boiling points, enthalpies of vaporization and entropies of vaporization. Ultraviolet and mass spectra are presented and discussed. An improved synthesis for CF₃SeH is reported.     

Electron structure and reactivity of organofluorine compounds. 3. Mndo and ami calculations of the ground state of perfluoroalkyl chlorides,bromides, and iodides

The semiempirical quantum chemical MNDO and AMI methods were used to determine the equilibrium geometries and electron properties of molecules of perfluoroalkyl halides (R_FX): CF₃X, CF₃CF₂X, (CF₃)₂CFX, (CF₃)₃CX for X=Cl, Br, and I. It was determined that the effective charge on the Cl atom in R_FCl is negative, positive on the I atom in R_FI, and depends on R_F for the Br atom in R_FBr. The CF₃ group can act as either an electron acceptor or donor in various perfluoroalkyl halides. The strongest C–I bond in the perfluoroalkyl halides occurs with a tertiary RF group.Translated from Izvestiya Akademii Nauk SSSR, Seriya Khimicheskaya, No. 5, pp. 1059–1063, May, 1990.     

Reactions of bis(trifluoromethyl)nitroxyl with (CF3)2PX (X = F,Cl, Br,I and CN)

Bis(trifluoromethyl)nitroxyl gives oxidative addition products with (CF₃)₂PX (X = F, Cl, Br and CN). With (CF₃(₂PI, iodine is eliminated to afford (CF₃)₂NOP(CF₃)₂. Mechanisms for the reactions are proposed and discussed, and spectral data of new compounds presented.     

Alkylation of perfluoro-2-methyl-2-pentylcarbanion with alkyl and allyl halides

Perfluoro-2-methyl-2-pentylcarbanion, generated from perfluoro-4-methyl-2-pentene in an aprotic solvent, reacted with halides RX, where R = alkyl or allyl and X = I, Br, or Cl, to give fluorohydrocarbons of the general formula CF₃CF₂CF₂C(CF₃)₂R. No reaction with iso-propyl iodide and with 1-iodo-2,2,2,-trifluoroethane occurred. The reaction with 1-iodo-3,3,3,-trifluoropropene resulted in the formation of 3,3,3,-trifluoropropene and 2-H-perfluoro-2-methyl-pentane.     

Schwingungsspektren und Normalkoordinatenanalyse von (CF3)2PX und (CF3)2AsX (X = F,Cl, Br,J)

Vibrational Spectra and Normal Coordinate Analysis of (CF₃)₂PX and (CF₃)₂AsX (X = F, Cl, Br, I) Gas phase i. r. spectra and liquid-phase Raman spectra of (CF₃)₂AsX are reported. The i. r. investigation of the corresponding phosphorus compounds is complited. The spectra of both the phosphorus and the arsenic compounds were assigned on the basis of a normal coordinate analysis using a transferred force field.     

An improved preparation of substituted phosphoryl difluorides. Synthesis of trifluoromethylthiodifluorophosphine and trifluoromethylthiophosphoryl difluoride

Difluorobromophosphine reacts readily with bis(trifluoromethylthio)- mercury to yield the fluorophosphine CF₃SPF₂ in excellent yields. The resulting new phosphine is readily oxidized under very moderate conditions by ClF, Cl₂ and O₂ to give new chlorofluorophosphorane and fluorophosphoryl compounds which contain the CF₃S moiety. CF₃SPF₂Cl₂ and CF₃SPF₂Cl were not characterized because of their tendency to disproportionate. CF₃SP(O)F₂ has, however, been isolated and characterized. All the new compounds are relatively unstable and decompose with a fluoride shift from the methyl group to the phosphorus atom. A new synthetic route to the known difluorophosphoryl compounds OPF₂Cl, OPF₂Br, OPF₂NCS and OPF₂(CH₃)₂, by the direct oxidation of the respective difluorophosphine with oxygen, has been found.     

Studies on fluoroalkylation and fluoroalkoxylation: 2. Perfluoroalkylation of aromatics with perfluoroalkyl iodides in the presence of copper

Perfluoroalkyl iodide R_fI [R_f = (CF₂)_nO(CF₂)₂SO₂F, n = 2, (a); n = 4, (b); (CF₂)₄Cl, (c)] reacted with substituted benzene C₆H₅Y (Y = alkyl, OCH₃, CF₃, F, Cl, Br, I) in the presence of copper in acetic anhydride to give the corresponding mixture of isomeric disubstituted benzene (R_fC₆H₄Y). The conversion and yield depend on both the amount of copper used and nature of substituent. The likely explanation is that the reaction may involve a free radical process. The perfluoroalkyl radical can be trapped by cyclohexene, isopropylbenzene and styrene. Using DMSO in place of acetic anhydride as a solvent the reaction takes a different course, it is believed that the reaction in DMSO proceeds through a perfluoroalkylcopper intermediate.     

Force field studies of some trifluoromethyl- and trichloromethyl-mercury-II) compounds

Force constants of [Hg(CF₃)₂], [Hg(CCl₃)₂], [Hg(CF₃)X] (X = Cl, Br, or I) and [Hg(CCl₃)X] (X = Cl or Br) have been calculated using a valence force field and wavenumber data from solutions. The potential energy distributions show substantial mixing between the symmetrical stretching and umbrella deformation coordinates of the trihalomethyl groups. The high degree of mixing of HgC and HgX stretching coordinates in [Hg(CF₃)Br] and [Hg(CF₃)I] accounts for the discontinuous frequency and intensity trends in the [Hg(CF₃)X] series.The results are discussed in comparison with methylmercury and other trifluoromethyl systems.     

Studies on sulfinatodehalogenation: XVII. The sulfinatodehalogenation of primary perfluoroalkyl iodides and bromides by Rongalite

Using acetonitrile or DMF as cosolvent, both perfluoroalkyl iodides such as Cl(CF₂)_nI (n = 4,6,8, la—lc ), CF₃ (CF₂)_n I (n = 5,6,7, ld—lf ), I (CF₂)_n O (CF₂) SO₃ Na(n = 2,4,6, lg—li ) and perfluoroalkyl bromides such as Cl (CF₂)_n Br (n = 4,6, 3a—3b ) and C₇F₁₅ Br (3e) reacted with Rongalite in aqueous solution to give the corresponding sulfinates Cl (CF₂)_n SO₂ Na (n = 4,6,8, 2a—2c ), CF₃-(CF₂)_nSO₂Na (n = 5,6,7, 2d—2f ) and NaO₂S(CF₂)_nO(CF₂)₂SO₃Na (n = 2,4,6, 2g—2i ) in moderate yields. 1 H-perfluoroalkanes were formed as the main products when other solvents such as ethanol. iso-propanol, 1,4-dioxane and morpholine were used.     

Preparation and properties of perfluorochloromethyl-mercaptophosphoryldichlorides and -chlorophosphanes

In Arbuzov-type reactions CF_nCl_3?nSCl reacts with ROPCl₂ (R = CH₃, C₂H₅) to give CF_nCl_3?nSP(O)Cl₂ (n = 3,2,1,0). The corresponding reaction with CF₃SeX (X = Cl, Br) produces CF₃SeP(O)Cl₂ in good yields only in the presence of catalysts such as SbCl₅ or BCl₃. Reactions between P₄ and the sulfenylchlorides produce (CF_nCl_3?nS)_xPCl_3?n (n = 3,2,1 and x = 1,2). On heating CF_n′ Cl_3?n′ SP(O)Cl₂ (n′ = 2,1,0) decompose to P(O)Cl₃ and SCF_n′ Cl_2?n′. During this process fluorination of P(O)Cl₃ to P(O)F₃ by SCF₂ is observed. A Cl/Br exchange between CF_nCl_3?nSP(O)Cl₂ (n = 3,2) and PBr₃ was proved ¹⁹F? and ³¹P-NMR-spectroscopically.Chemical and physical properties of the newly synthesized compounds will be discussed.     

Tris(trifluoromethyl)borane Adducts of Cyanogen Halides

The reactivity of carbonyl‐tris(trifluoromethyl)borane (CF₃)₃BCO against the homologous series of cyanogen (pseudo)halides NCX, X = F, Cl, Br, I, CN, was investigated. Lewis acid‐base adducts (CF₃)₃BNCX were obtained for X = Cl, Br, I, CN and were characterized by vibrational and NMR spectroscopy. It appeared that FCN did not react and twofold complexation of NCCN does not occur, in agreement with theoretical complexation energies and QTAIM charges.     

Darstellung und Reaktionen von Selenocarbonyldifluorid und seines cyclischen Dimeren 2,2,4,4-Tetrafluor-1,3-diselenetan [l]

Inhaltsübersicht. Das erstmals hergestellte B(SeCF₃)₃ zerfällt unter dem katalytischen Einfluß von Alkalifluoriden zu F₂C=Se und BF₃. In Anwesenheit von BF₃ polymerisiert F₂CSe bereits. bei ?;80°C. Oberhalb 150°C depolymerisiert (F₂CSe)_n wieder zu F₂C=Se und. Durch Halogenaddition an F₂C = Se gewinnt man F₂XCSeX (X = Cl, Br). Das in der Reihe Cl_3–nF_nCSeCl noch fehlende Cl₂FCSeCl wird durch Umsetzung von CSe₂, ClF und Cl₂ synthetisiert. F_nCl_3–nCSeCl (n = 1. 2) liefert mit Zinn die entsprechenden symmetrischen Diselane, mit AgCN die Selenocyanate. Durch Halogenaustausch mit BX₃ (X = Cl, Br) wird umgewandelt. XC(S)Cl reagiert mit Hg(SeCF₃)₂ zu CF₃SeC(S)X (X = F, Cl. CF₃Se). Daraus werden durch Chloraddition die entsprechenden Sulfenylchloride synthetisiert. IR-NMR- und Massenspektren der neu hergestellten Substanzen werden angegeben. Preparation and Reactions of SeCF₂ and its Cyclic Dimer 2,2,4,4-Tetrafluoro-1,3-diselenetane Abstract. B(SeCF₃)₃, prepared for the first time, decomposes under the influence of alkali metal fluorides to F₂C=Se and BF₃. In presence of BF₃, SeCF₂ polymerizes even at ?80°C. Above 150°C (F₂CSe)n depolymerizes to F₂C = Se and Halogen addition to F₂C=Se produces F₂XCSeX (X = Cl, Br). The compound Cl₂FCSeCl could be synthesized by the reaction of CSe₂ with ClF and Cl₂. These selenenylchlorides react with tin producing the corresponding symmetric diselenides whereas with AgCN the selenocyanates are formed. can be transformed to through halogen exchange reaction with BX₃ (X = Cl, Br). XC(S)Cl reacts with Hg(SeCF₃)₂ to give CF₃SeC(S)X (X = F, Cl. CF₃Se), from which the corresponding sulfenylchlorides can be synthesized by chlorine addition. I.r., n.m.r., and mass spectra of the newly prepared compounds are reported.     

Reaction of polyfluoroarenesulfonyl bromides with allyl bromide. Synthesis of allyl polyfluoroaryl sulfones

Reactions of polyfluoroarenesulfonyl bromides 4-XC₆F₄SO₂Br (X = F, H, Cl, Br, CF₃) with allyl bromide gave 84–94% of the corresponding allyl polyfluoroaryl sulfones.