杂萘联苯共聚醚砜的非均相磺化

以杂萘联苯共聚醚砜(PPHES)为原料,氯仿为溶剂,浓硫酸为磺化试剂,采用非均相磺化法对PPHES进行了磺化改性,得到了一系列不同磺化度的磺化杂萘联苯共聚醚砜(SPPHES).考察了浓硫酸浓度、磺化反应温度和时间等工艺条件对产物磺化度的影响.利用FT-IR、1H-NMR对SPPHES进行了表征.结果表明,磺酸基已成功引...     

聚醚砜与含萘环的聚芳醚酮增容共混物的研究

以双酚S型含萘环的聚芳醚酮为增容剂,研究了对聚醚砜(PES)与对苯二酚型-1,4-萘环的聚芳醚酮(1,4-NA-PAEK)共混体系的相容性及力学性能.结果表明,双酚S型含萘环的聚芳醚酮可显著降低PES/NA-PAEK共混体系中NA-PAEK分散相尺寸,改善两组分间的相容性,并且增容剂的加入使共混体系形成了双连续的互锁结构,提高了共混物的力学性能.     

芳醚砜二胺、芳醚砜双马来酰亚胺的合成及共聚树脂的性能研究

通过在三种不同的溶剂一碱体系中合成芳醚砜二胺的研究，确定了最佳的合成路线。用酸碱法对产物进行了纯化，进而合成了芳醚砜双马来酰亚胺。热重分析表明，芳醚砜双马来酰亚胺／芳醚砜二胺共聚树脂具有较高的热和热氧稳定性。     

4,4’-二氯二苯酮合成二氮杂萘联苯酮结构聚醚砜酮的研究

以4-(4-羟基苯基)*2,3-二氮杂萘-1-酮(DHPZ)、4,4’-二氯二苯砜(DCS)和4,4’-二氯二苯酮(DCK)为原料,采用分步加料的方法,合成了系列高分子量的聚芳醚砜酮共聚物(PPESKs),其特性黏度在0.40 ～0.61dL/g之间,解决了由于DCK活性低不适合用于聚芳醚合成的问题.采用FTIR、示差...     

含芴和双酚AF型氮杂萘酮的两亲嵌段聚芳醚砜酮离聚物的合成与性能

采取"二锅二步"的聚合方法以双酚芴、4,4'-二氯二苯砜、双酚AF型二氮杂萘酮、二氟二苯酮磺酸钠为原料制备了含芴-聚芳醚砜憎水链段和双酚AF型二氮杂萘酮-磺化聚芳醚酮亲水链段的两亲嵌段聚芳醚砜酮离聚物,通过调整4种单体的比例以及预聚合、再缩合聚合工艺制备了一系列具有不同链段尺寸的芴-双酚AF型氮杂萘酮-两亲嵌段聚芳醚砜酮离聚物质子交换膜材料.通过黏度测试、傅里叶变换红外光谱(FTIR)、氢谱(1H-NMR)、热失重(TGA)等分析方法,对离聚物的结构和性能进行了表征,用蒸发溶剂法制备了质子交换膜,并考察膜的各种性能.实验结果表明,该系列离聚物的结构可控,热稳定性良好,5 wt%热失重温度均高于250℃;由其制备的质子交换膜具有良好的耐醇性和耐甲醇渗透性能、优异的抗氧化性和水解稳定性、以及适当的质子导电率和吸水率,室温下该系列膜的甲醇渗透率在0.23×10-6～0.28×10-6cm2/s,比Nafion 117具有更好的耐甲醇渗透性能;80℃下该系列膜的质子导电率与30℃时相比呈现倍增趋势,离聚物8e膜的质子导电率在80℃下达到了1.83×10-3S/cm.     

含二氦杂萘酮结构全芳香杂环聚合物的研究进展

高性能高分子材料在高温下仍保持优异的综合性能,是航空航天、电子电气、高速轨道交通等重要高技术领域不可或缺的材料。在不牺牲耐热性能的前提下改善高性能聚合物的加工性能一直是国内外研究的热点。含二氮杂萘酮结构高性能聚合物是高性能高分子材料的新成员。本文主要综述了含二氮杂萘酮结构的聚芳醚（包括聚芳醚砜酮系列、聚芳醚腈砜酮系列、...     

新型多氯取代聚芳醚酮砜的合成与表征

新型多氯取代聚芳醚酮砜的合成与表征;聚芳醚酮砜;四氯对苯二甲酰氯;低温溶液缩聚;无规共聚物     

羧侧基聚芳醚砜醚酮酮的合成及其吸附性能

聚芳醚砜醚酮酮;羧基侧基;合成;表征;离子交换;吸附     

含氰基侧基聚芳醚砜的合成与表征

汉２，６－二卤苯甲腈、４，４′－二氯二苯砜、４，４′－二羟基二苯砜、间苯二酚、对苯二酚、酚酞及双酚Ａ为主要原料，合成了含不同结构单元和不同氰基含量的含氰基侧基的聚芳醚砜，并采用ＩＲ、＾１３ＣＮＭＲ等分析手段对其结构进行了表征，同时研究了结构单元和氰基含量对聚芳醚砜性能的影响。     

聚醚砜醚酮的合成与性能

以4,4′-二羟基二苯砜和4,4′-二氟二苯酮为单体, 通过溶液缩聚合成了聚醚砜醚酮(PESEK), 其分子结构相当于聚醚砜(PES)与聚醚醚酮(PEEK)的交替共聚物. 在共聚物分子中, 存在砜基、醚基和酮基, 整个结构单元形成了大共轭体系, 聚合物属无定形聚合物, 玻璃化转变温度(Tg)为198 ℃, 介于PEEK和PES的Tg之间, 其热稳定性和加工性能优于PES, 而力学性能与PES接近.     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

A general and convenient synthesis of 4-(tosylmethyl)semicarbazones and their use in amidoalkylation of hydrogen,heteroatom, and carbon nucleophiles

A general synthesis of previously unknown semicarbazone-based α-amidoalkylating reagents, 4-(tosylmethyl)semicarbazones, has been developed. The synthesis involved three-component condensation of semicarbazones of aliphatic or aromatic aldehydes with the same or other aldehydes and p-toluenesulfinic acid. The scope and limitations of this reaction were investigated. The compounds obtained were demonstrated to be an efficient α-(4-semicarbazono)alkylating agents. They were reacted with H- (sodium borohydride), O- (sodium methylate), S- (sodium phenylthiolate), N- (pyrrolidine, sodium succinimide), P- (trialkyl phosphites), and C-nucleophiles (sodium diethyl malonate) to give the corresponding products of the tosyl group substitution, 4-substituted semicarbazones, including analogues of nitrofurazone. Among the prepared compounds tested in vitro for antibacterial and antifungal activity, three nitrofuryl-containing semicarbazones exhibited high biological activities with minimum inhibitory concentration (MIC) values of 8–32 μg/mL.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Synthesis of novel chiral bidentate hydroxyalkyl-N-heterocyclic carbene ligands and their application in palladium-catalyzed Mizoroki–Heck couplings and asymmetric addition of diethylzinc to benzaldehyde

A small library of new chiral bidentate hydroxyalkyl-imidazolium salts 1 is conveniently synthesized on multi-gram scale from inexpensive and commercially available chiral pool amino acids. The corresponding carbenes, generated by deprotonation of imidazolium salts 1, in combination with palladium(II) chloride were tested in the Mizoroki–Heck coupling reaction. The most significant results in terms of yields and reactivities were achieved with low catalyst loading. The catalytic activities of these imidazolium salts were also investigated in the asymmetric addition of diethylzinc to benzaldehyde. The use of MgO nanoparticles as an additive in conjunction with these ligands played a crucial role in increasing the efficiency of these reactions.