Micellization in aqueous solution of an ethylene oxide-propylene oxide triblock copolymer, investigated with 1H NMR spectroscopy, pulsed-field gradient NMR, and NMR relaxation

(1)H nuclear magnetic resonance (NMR) spectroscopy has been applied to study the temperature and concentration-induced micellization of a poly(ethylene oxide) (PEO) and poly(propylene oxide) (PPO) triblock copolymer, Pluronic P105, in D(2)O solutions in the temperature range from 5 to 45 degrees C and the concentration range from 0.01 to 15% (w/v). The intrinsic probes, the chemical shift, and the half-height width of the PO CH(3) signal are very sensitive to the local environment and can be used to characterize the temperature and concentration-dependent aggregation process. When the temperature approaches the critical micellization temperature or the polymer concentration reaches the critical micellization concentration, the chemical shift of the PO CH(3) signal moves toward lower ppm values and the half-height width of the PO CH(3) signal shows a sudden increase. It indicates that the methyl groups are experiencing a progressively less polar environment and transferring from water to the hydrophobic micellar core. The hydrodynamic radius of the unimers and the micelles are determined as be 1.8 and 5.0 nm by means of pulsed-field gradient spin-echo (PGSE) NMR. They were independent of temperature and concentration. The drastic shortening of spin-lattice relaxation time T(1) for the PO CH(3)/CH(2) protons in the transition region suggested that the PPO blocks are located in a "liquid-like" micellar core, whereas the exponential increase of T(1) for the PEO CH(2) protons implied that the PEO blocks are still keeping in contact with surrounding water. Thermodynamics analysis according to a closed association model shows that the micellization process is entropy-driven and has an endothermic micellization enthalpy.     

Nanoscale inhomogeneities in thermoresponsive triblock copolymers

We present continuous-wave (CW) electron paramagnetic resonance (EPR) spectroscopy data of the spin probe 2,2,6,6-tetramethylpiperidine-1-oxyl (TEMPO) in aqueous solutions of poly(ethylene oxide)/poly(propylene oxide)/poly(ethylene oxide) (PEO-PPO-PEO) triblock copolymers (Pluronic or Poloxamer). TEMPO is notably smaller than the spin probes conventionally used in the context of polymer science and reveals the early emergence of small hydrophobic cavities when PPO strands of several molecules aggregate and collapse upon temperature increase. The occurrence of hydrophobic cavities appears independent of the overall molecular weight of the Pluronics, but clearly depends on the relative PPO/PEO contents. In all the cases studied, the volume fraction of hydrophobic cavities increases in a broad temperature range of ≥40 °C. The appearance of the hydrophobic regions does not seem to be directly correlated to micellization of the polymers. A decrease of the relative PPO amount in the polymers not only hinders collapse of the PPO strands, it can also be described as a site exchange of the spin probes between hydrophobic cavities and the surrounding medium. On the other hand, in cases of high PPO contents, spin probe exchange could not be observed. This suggests that one may potentially control the diffusion of small molecules between the micellar cores and the surrounding medium by adjusting the PEO/PPO ratio of the used Pluronics.     

Towards microphase separation in epoxy systems containing PEO/PPO/PEO block copolymers by controlling cure conditions and molar ratios between blocks. Part 2. Structural characterization

The influence of addition of poly(ethylene oxide)-block-poly(propylene oxide)-block-poly(ethylene oxide) (PEO–PPO–PEO) copolymers on final morphologies of modified epoxy matrices has been investigated as a function of PEO:PPO molar ratio and cure conditions by comparison with the cured epoxy blends only containing poly(ethylene oxide) (PEO) or poly(propylene oxide) (PPO) homopolymers. Atomic force microscopy (AFM) has been used to characterize structural features of blends. Whilst diglycidyl ether of bisphenol-A (DGEBA)/4,4’-diaminodiphenylmethane (DDM)/PPO system macrophase separates, the interactions between PEO and cured epoxy are responsible for miscibility of DGEBA/DDM/PEO system. Depending on PEO:PPO molar ratio, micro- or macrophase separated morphologies have been obtained for block copolymer modified epoxy matrices. Moreover, the influence of both copolymer content and cure temperature on final morphologies has also been investigated by both experimental and theoretical analysis.     

Effect of ionic liquid on diffusion in P123 gel: fluorescence correlation spectroscopy

The effect of two room-temperature ionic liquids (RTILs) on the diffusion of three fluorescent dyes in the gel phase of a triblock copolymer, (PEO)(20)-(PPO)(70)-(PEO)(20) [Pluronic P123; poly ethylene oxide (PEO), poly propylene oxide (PPO)], was studied by using fluorescence correlation spectroscopy (FCS). We used three dyes, 4-(dicyanomethylene)-2-methyl-6-(4-dimethylaminostyryl)-4H-pyran (DCM), coumarin 480 (C480), and coumarin 343 (C343). By field-emission scanning electron microscopy (FESEM), it was observed that the macroscopic structure of the P123 gel remained unaffected upon addition of RTIL. In the absence of RTIL, the diffusion coefficient (D(t)) of the hydrophobic dye DCM (1 μm(2) s(-1) at the core) is smaller than that of the other two hydrophilic dyes (7 μm(2) s(-1) for C480 and C343). On addition of RTIL, the D(t) values of all of the dyes increase, indicating a decrease in local viscosity (η(eff)). The η(eff) of the core of the RTIL-P123 gel estimated from the D(t) of DCM is lower than that of both the P123 gel (at the core η=90 cP) and RTIL (η=110 cP). It is shown that the RTIL affects the structure of the gel by modifying the size of the micellar aggregates and by penetrating the core.     

Aqueous block copolymer-surfactant mixtures and their ability in solubilizing chlorinated organic compounds. A thermodynamic and SANS study

Within the topic of surfactant enhanced solubilization of additives sparingly soluble in water, volumetric, solubility, conductivity, and small-angle neutron scattering (SANS) experiments on mixtures composed of alpha,omega-dichloroalkane, surfactant, copolymer, and water were carried out at 298 K. The triblock copolymers (ethylene oxide)132(propylene oxide)50(ethylene oxide)132 (F108) and (ethylene oxide)76(propylene oxide)29(ethylene oxide)76 (F68) were chosen to investigate the role of the molecular weight keeping constant the hydrophilic/hydrophobic ratio. The selected surfactants are sodium decanoate (NaDec) and decyltrimethylammonium bromide (DeTAB) with comparable hydrophobicity and different charged heads. The alpha,omega-dichloroalkanes were chosen as contaminant prototypes. For the water + surfactant + copolymer mixtures, both the volume and the SANS results straightforwardly evidenced that (1) monomers of NaDec and copolymer unimers generate small mixed aggregates, (2) monomers of DeTAB combined with copolymer unimers do not form aggregates, and (3) unimeric copolymer is solubilized into NaDec and DeTAB micelles. The alpha,omeaga-dichloroalkanes presence induces the F108 aggregation even at very low copolymer composition. The addition of surfactant disintegrates the F108 aggregates and, consequently, the additive is expelled into the aqueous phase. Once F108 is in the unimeric state, it forms copolymer-micelle aggregates which incorporate the oil. In the case of F68 both the volumetric and the SANS data reveal that the additive does not alter the copolymer unimeric state. Moreover, they show that for the aqueous DeTAB-F68 system the additive trapping in both the copolymer-micelle aggregate and the pure micelles takes place being enhanced in the former aggregate in agreement with solubility experiments. For the NaDec-F68 mixtures, an additional solubilization process in the premicellar copolymer-surfactant microstructures occurs. SANS and conductivity data show that the additive incorporation into the mixed and the pure micelles does not essentially influence the structural properties of the aggregates.     

Amphiphilic polylactide-poly(ethylene oxide)-poly(propylene oxide) block copolymers: Self-assembly behavior and cell affinity

Polylactide (PLA) is a biodegradable polyester recognized for its potential use as a biomedical material. Poly(ethylene oxide) (PEO) and copolymers based on PEO and poly(propylene oxide) (PPO) are biocompatible polyethers widely applied in the biomedical field, particularly as macromolecular nonionic surfactants. In this work, PLA blocks were attached to the PEO and to the PEO and PPO-based triblock copolymer PEO–PPO–PEO, through ring-opening polymerization of racemic lactide (rac-LA) to obtain the amphiphilic triblock PLA–PEO–PLA and pentablock PLA–PEO–PPO–PEO–PLA copolymers containing hydrophilic/hydrophobic blocks with variable block mass ratios. The copolymers were evaluated for chemical composition, molar mass, and thermal properties, and they were used to prepare self-assemble aggregates in water from tetrahydrofuran polymer solutions. The combination of scattering light experiments and microscopy techniques revealed the spherical morphology of the aggregates with diameters around 180–200 nm, which comprises a hydrophobic PLA core and a hydrophilic polyether shell. The aggregates are nontoxic to human cervical cancer cell line — HeLa cells, as determined by MTS assay, and the aggregates are potential candidates to be applied in the encapsulation of hydrophobic compounds. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 2203–2213     

Interactions of charged porphyrins with nonionic triblock copolymer hosts in aqueous solutions

The extent and locus of solubilization of guest and self-assembling surfactant host molecules in aqueous solutions are influenced by a variety of hydrophobic and hydrophilic interactions, as well as by more specific interactions between the various species present. By using a combination of two-dimensional heteronuclear 13C[1H] NMR correlation experiments with pulsed-gradient NMR diffusion and proton cross-relaxation measurements, the locations and distributions of porphyrin guest molecules have been established unambiguously with respect to the hydrophobic and hydrophilic moieties of a triblock copolymer species in solution. The interactions of tetra(4-sulfonatophenyl)porphyrin with the poly(propylene oxide) (PPO) and the poly(ethylene oxide) (PEO) segments of amphiphilic PEO-PPO-PEO triblock copolymer species have been measured as functions of solution conditions, including temperature and pH. The porphyrin/PEO-PPO-PEO interactions are established to be selective and adjustable according to the different temperature-dependent hydrophilicities or hydrophobicities of the PEO and PPO triblock copolymer components. Furthermore, such interactions influence the self-assembly properties of the block-copolymer amphiphiles in solution by stabilizing molecular porphyrin/PEO-PPO-PEO complexes well above the critical micellization temperature of the triblock copolymer species under otherwise identical conditions.     

Self-assembled supramolecular gels of reverse poloxamers and cyclodextrins

A series of supramolecular aggregates were prepared using a poly(propylene oxide)-poly(ethylene oxide)-poly(propylene oxide) (PPO-PEO-PPO) block copolymer and β- or α-cyclodextrins (CD). The combination of β-CD and the copolymer yields inclusion complexes (IC) with polypseudorotaxane structures. These are formed by complexation of the PPO blocks with β-CD molecules producing a powder precipitate with a certain crystallinity degree that can be evaluated by X-ray diffraction (XRD). In contrast, when combining α-CD with the block copolymer, the observed effect is an increase in the viscosity of the mixtures yielding fluid gels. Two cooperative effects come into play: the complexation of PEO blocks with α-CD and the hydrophobic interactions between PPO blocks in aqueous media. These two combined interactions lead to the formation of a macromolecular network. The resulting fluid gels were characterized using different techniques such as differential scanning calorimetry (DSC), viscometry, and XRD measurements.     

Temperature,concentration and salt effect on F68 tri-block copolymer in aqueous solution: Rheological study

The rheology of the aqueous solution of poly(ethylene oxide)-block-poly(propylene oxide)-block-poly(ethylene oxide) (PEO?PPO?PEO) triblock copolymer, Pluronic F68 in the presence of KF was studied in the temperature range from 15 to 60°C. The variation of the shear stress according to the shear rate shows that independently from the temperature and concentration, the F68 solutions exhibit a Newtonian behavior. The results show that the Critical Micelle Temperature of Pluronic F68 in a KF aqueous solution decreases with the increase in the salt concentration.     

1H NMR spectroscopic investigations on the micellization and gelation of PEO-PPO-PEO block copolymers in aqueous solutions

The effects of temperature, polymer composition, and concentration on the micellization and gelation properties of poly(ethylene oxide)-poly(propylene oxide)-poly(ethylene oxide) (PEO-PPO-PEO) block copolymers in aqueous solutions were investigated by 1H NMR spectroscopy. It was found that the temperature-dependent behavior of PPO blocks, observed as changes in chemical shift, half-height width, and integral value, could be attributed as an intrinsic tool to characterize the transition states during unimer to micelle formation. The 1H NMR spectral analysis revealed that the hydrophobic part, PPO, of the Pluronic polymers plays a more significant role in the temperature-induced micellization, whereas the transitional behavior of Pluronic polymer, i.e., from micellization to liquid crystals formation, resulted in the drastic broadening of the spectral signals for the PEO, indicating that the PEO segments play a more significant role in the crystallization process. It was also observed that the temperature-dependent changes in the half-height width of the PEO -CH2- signal are sensitive to the liquid crystalline phase formation, which could be attributed to the close packing of spherical micelles at high polymer concentrations or temperatures.     

Hydrophilic poly(ethylene oxide)–aramide segmented block copolymers

The present paper discusses block copolymers with segments of either poly(ethylene oxide), poly(propylene oxide), or mixtures of poly(ethylene oxide)/poly(propylene oxide) and monodisperse aramide segments. The length of the polyether segments as well as the concentration of polyethylene oxide was varied. The synthesized copolymers were analyzed by DSC, FTIR, AFM and DMTA. In addition, the hydrophilicity was studied.The crystallinity of the monodisperse aramide segments was found to be high and the crystals, dispersed in the polyether phase, displayed a nano-ribbon morphology. The PEO segments were able to crystallize and this crystalline phase reduced the low-temperature flexibility. The PEO crystallinity and melting temperature could be strongly reduced by copolymerization with PPO segments. By using mixtures of PEO and PPO segments, hydrophilic copolymers with decent low-temperature properties could be obtained.     

水溶液中Pluronic嵌段共聚物聚集行为的介观模拟

通过介观动力学方法(MesoDyn)研究了低浓度下的三嵌段共聚物PEO27PPO61PEO27 (P104)水溶液的聚集行为, 讨论了聚合物浓度、模拟时间对P104水溶液相行为的影响. 在聚合物浓度较低(φ<35%)的情况下, 可以形成三种不同的胶束聚集体：球形胶束(spherical micelle)、胶束簇(micellar cluster)和盘状胶束(disk-like micelle). (1) 球形胶束(5%-10%, φ), 模拟的胶束结构表明疏水的PPO嵌段形成球形内核(micellar core), 而亲水的PEO嵌段形成核壳(micellar corona), 并有水分子存在内核和核壳之中；(2) 胶束簇(11%-15%, φ), 由于球形胶束之间的缔合, 形成直径明显高于球形胶束的聚集体, 其半径比球形胶束大1 nm左右；(3) 盘状胶束(16%-25%, φ), 胶束簇核壳PEO嵌段之间的相互缠绕, 形成了成串的类似盘状的胶束. 模拟中有序参数随浓度的变化证明了这种结构划分的合理性.     

PH/温度响应的两亲性嵌段共聚物的研究

刺激响应性两亲性嵌段共聚物由于具有多种潜在的用途而引起广泛关注。其中,pH和温度响应的嵌段共聚物被认为是较易获得并对外界环境刺激响应较敏感的一类聚合物。本文综述了利用各种可控/活性聚合方法制备不同结构刺激响应性的两亲性嵌段共聚物研究的最新进展,重点介绍聚（甲基）丙烯酸及其酯类与聚环氧乙烷(PEO)和聚环氧丙烷(PPO)类结构的两亲性嵌段共聚物的合成以及它们在水溶液中对pH值和温度变化的响应性。     

Formation of internally nanostructured triblock copolymer particles

Particles with an internal structure have been found in dilute water solutions of a triblock copolymer of poly(ethylene oxide) (PEO) and poly(propylene oxide) (PPO), which has short hydrophilic PEO endblocks compared to the central hydrophobic PPO block (EO5PO68EO5, L121). The properties of the block copolymer particles (i.e., their structure, size, and time stability) have been investigated using cryogenic transmission electron microscopy (cryo-TEM) in combination with dynamic light scattering (DLS) and turbidity measurements. The particles were formed in dilute solutions by quenching the temperature to temperatures where the reversed hexagonal phase is in equilibrium with a solution of unaggregated L121 copolymers (L1). From the DLS measurements, a mean hydrodynamic radius of 158 nm was extracted. The time-scan turbidity measurements were found to be unchanged for about 46 h. At higher copolymer concentrations, a reversed hexagonal phase (H2) exists in the L121/water system. SAXS was used to investigate the internal structure of the dispersed L121-based particles containing 15 wt % L121. It was found that the internal structure transforms from H2 to an inverse micellar system (L2) as the temperature increases from 37 to 70 degrees C.     

Continuous synthesis of CdSe(x)Te(1-x) nanocrystals: chemical composition gradient and single-step capping

Thermosensitive poly(ethylene oxide)-poly(propylene oxide)-poly(ethylene oxide) (PEO-PPO-PEO) triblock copolymer, Pluronic F68, containing a hydrophobic unit, oligo-(lactic acid)(oligo-LA) or oligo-caprolactone (oligo-CL), 2-META and RGD as side groups was successfully synthesized and characterized by (1)H NMR, FTIR, and elemental analysis. Their aqueous solution displayed special gel-sol-gel phase transition behavior with increasing temperature from 10 to 70°C, when the polymer concentration was above critical micelle concentration (CMC). The gel-sol phase diagram was investigated using tube inversion method, rheological measurement, and dynamic light scattering. Based on these results, the gelation properties of modified F68 were affected by several factors such as the composition of the substituents, chain length of oligo L-LA or oligo ε-CL, and the concentration of the polymer solutions. The unique phase transition behavior with temperature was observed by modified F68 triblock copolymer, composed of the PPO blocks core and the PEO blocks shell in aqueous solution. This phenomenon was elucidated using (1)H NMR data; the alteration of hydrophobic interaction and chain mobility led to the formation of transparent gel, coexistence of gel-sol, and opaque gel. These hydrogels may be useful in drug delivery and tissue engineering.     

Thioether-functionalized mesoporous fiber membranes: sol-gel combined electrospun fabrication and their applications for Hg2+ removal

Mesoporous polyvinylpyrrolidone (PVP)/SiO(2) composite nanofiber membranes functionalized with thioether groups have been fabricated by a combination method of sol-gel process and electrospinning. The precursor sol was synthesized by one-step co-condensation of tetraethyl orthosilicate (TEOS) and 1,4-bis(triethoxysilyl)propane tetrasulfide (BTESPTS, (CH(3)CH(2)O)(3)Si(CH(2))(3)S-S-S-S(CH(2))(3)Si-(OCH(2)CH(3))(3)), with the triblock copolymer poly(ethylene oxide)-poly(propylene oxide)-poly(ethylene oxide) (P123, EO(20)PO(70)EO(20)) as template. After the addition of PVP, nanofiber membranes were prepared by electrospinning. The membranes were characterized by scanning electron microscopy (SEM), high-resolution transmission electron microscopy (HRTEM) images, X-ray diffraction (XRD), Fourier-transform infrared spectroscopy (FT-IR), N(2) adsorption-desorption isotherms, and an Elementar Vario EL analyzer. The composites were used as highly selective adsorbents for Hg(2+) due to the modification with thioether groups (-S-), and were conveniently separated from the waste water. The composite could be regenerated through acidification.     

Thermosensitive sol–gel transition behaviors of poly(ethylene oxide)/aliphatic polyester/poly(ethylene oxide) aqueous solutions

The thermoreversible gelation of Pluronic [poly(ethylene oxide) (PEO)–polypropylene oxide (PPO)–PEO] aqueous solutions originates from micelle formation and micelle volume changes due to PEO–water and PPO–water lower critical solution temperature behavior. The micelle volume fraction is known to dominate the sol–gel transition behavior of Pluronic aqueous solutions. Triblock copolymers of PEO and aliphatic polyesters, instead of PPO, were prepared by hexamethylene diisocyanate coupling and dicyclohexyl carbodiimide coupling. Through changes in the molecular weight and hydrophobicity of the polyester middle block, the hydrophobic–hydrophilic balance of each block was systematically controlled. The following aliphatic polyesters were used: poly(hexamethylene adipate) (PHA), poly(ethylene adipate) (PEA), and poly(ethylene succinate) (PESc). With the hydrophobicity and molecular weight of the middle block increasing, the critical micelle concentration at the same critical micelle temperature decreased, and the absolute value of the micellization free energy increased. The micelle size was rather insensitive to temperature but slightly decreased with increasing temperature. PEO–PHA–PEO and PEO–PEA–PEO triblock copolymers needed high polymer concentrations to form gels. This was ascribed to the tight aggregation of PHA and PEA chains in the micelle core due to strong hydrophobic interactions, which induced the contraction of the micelle core. However, because of the relatively hydrophilic core, a PEO–PESc–PEO aqueous solution showed gelation at a low polymer concentration. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 772–784, 2004     

Morphology,thermo-mechanical properties and surface hydrophobicity of nanostructured epoxy thermosets modified with PEO-PPO-PEO triblock copolymer

In this paper, we report on the effect of amphiphilic poly(ethylene oxide)-poly(propylene oxide)-poly(ethylene oxide) (PEO-PPO-PEO) triblock copolymer (TBCP) on the miscibility, phase separation, thermomechanical properties and surface hydrophobicity of diglycidyl ether of bisphenol-A (DGEBA)/4,4'-diaminodiphenylmethane (DDM) system. The blends were nanostructured. The phase separation occurred via self-assembly of PPO blocks followed by the reaction induced phase separation of PEO blocks. The surface roughness increased with increase in concentration of TBCP due to increased phase separation of PEO blocks at higher concentration. The phase separated PEO blocks formed the crystalline phase in the amorphous crosslinked epoxy matrix. The TBCP has a strong plasticizing effect on the matrix and decreased the glass transition temperature (T_g) and modulus of the thermoset. The incorporation of TBCP improved impact strength and tensile properties and 5 phr TBCP content was found to be optimum to achieve balanced mechanical performance. Moreover, the thermal stability of the epoxy system was retained while hydrophobicity was improved in the presence of TBCP.     

Rotational diffusion of an ionic solute in polymorphic environments of a block copolymer: influence of interfacial friction on solute rotation

In an attempt to understand the role of interfacial friction on solute rotation, fluorescence anisotropy decays of a cationic solute, rhodamine 110, have been measured in polymorphic environments of a triblock copolymer, (PEO)20-(PPO)70-(PEO)20 (P123) (PEO = poly(ethylene oxide), PPO = poly(propylene oxide)). It has been noticed that even though rhodamine 110 is located in the interfacial region of the micelles, sol-gel transition does not significantly influence its rotation. Micelle-micelle entanglement, which is responsible for gelation, persists even in the micellar solution phase, perhaps to a lesser degree, and this entanglement is responsible for the observed behavior. This hypothesis has been substantiated by undertaking concentration-dependent studies in which it is shown that the reorientation time of the solute increases with an increase in the micellar concentration. In the case of reverse micelles, it has been observed that an enhancement in the water content facilitates solute rotation, which has been rationalized on the basis of solute migration from the hydrated poly(ethylene oxide) region to the poly(ethylene oxide)-water interface within the core.     

Small-angle neutron scattering study of adsorbed pluronic tri-block copolymers on laponite

The adsorption of selected poly(ethylene oxide)-poly(propylene oxide)-poly(ethylene oxide) (PEO-PPO-PEO) tri-block copolymers on synthetic clay particles (laponite) has been investigated. The adsorbed amount and distribution of polymer was determined as a function of relative block composition and size, using the technique of contrast variation small-angle neutron scattering. The pluronic molecules appear to adsorb via a preferential segregation of hydrophobic PPO segments at the surface, with hydrophilic PEO segments dangling into solution. The effect of the PPO segments is substantial with large increases in adsorbed amount and layer thickness as the anchor fraction decreases/PEO chain length increases. This is in direct contrast to the behavior observed for PEO homopolymer adsorption (of much higher molecular weights) where the adsorbed amount and layer thickness are smaller and change little with molecular weight.