含悬挂羧基手臂聚乳酸材料的内皮细胞黏附及其细胞活性

为了考察内皮化材料表面的细胞活性, 在前期工作的基础上, 分别在聚乳酸(PLA)、乳酸-苹果酸共聚物(PLMA), 以及含悬挂羟基或羧基的乳酸-苹果酸共聚物膜(PLMAHE,PLMACA)表面种植人脐静脉内皮细胞(HUVEC), 成功地制备了内皮化表面. 通过测定内皮化材料表面内皮细胞释放的内皮型一氧化氮合酶(eNOS)以及一氧化氮的释放量, 间接考察了内皮细胞的抗凝血活性; 另外, 通过内皮化表面的血小板黏附实验, 直接观察了血小板在内皮细胞上的黏附情况. 实验结果表明, 含羧基材料表面的内皮细胞活性比PLA和PLMAHE的高; 相对其它材料PLMACA能更有效地保留黏附于其表面内皮细胞的活性, 其单位内皮细胞的eNOS以及NO的释放量分别为(41.8±8.1) μmol/104 cells和(0.76±0.16) U/104 cells. 电镜照片(SEM)显示, 各种材料表面的内皮细胞均能有效地减少血小板的黏附与聚集; 在内皮细胞脱落的区域, PLMACA仍能较好地实现其抑制血小板黏附的功能, 有望成为新型血管修复(替代)材料.     

Distribution of Zinc Oxide Nanocrystals in a Polymer Film

The structure of polymer films modified with zinc oxide nanocrystals was studied by the optical absorption and small-angle X-ray scattering methods. Small-angle X-ray scattering allows determination of the nanoparticle size distribution function, which is the decisive factor in predicting the optical properties of heterophase materials, including filled polymer films. The optical absorption spectrum of an acrylate polymer film doped with 1.6 wt % zinc oxide nanocrystals approaches the ideal absorber spectrum, which allows this material to be recommended for use as a protective color filter.     

Compartmentalized nanocomposite for dynamic nitric oxide release

Nitric oxide (NO) is an important cell-signaling molecule whose role in a variety of cellular processes such as differentiation and apoptosis depends strongly on its concentration and flux levels. This work describes and characterizes a novel nitric oxide releasing nanocomposite, capable of photostimulated NO flux that can by dynamically modulated in within a range of biological levels. This material mimics the common compartmentalization strategies used by living cells to achieve its novel features. The material is constructed by encapsulating a photosensitive nitric oxide donor within lipid vesicles with an average diameter of 150 nm. The vesicles are then doped into the interstitial liquid phase of a solid porous silica matrix, which has previously demonstrated biological compatibility and capabilities as a growth surface for mammalian cells. Stimulation by a light source produces a step increase in NO concentration within seconds. The NO flux at the surface of the material is measured to be 14 pmol-cm(-2) sec(-1) using a NO selective self-referencing amperometric microsensor. The NO concentration profile decreases with distance perpendicular to the surface as expected for diffusion from a surface through an aqueous environment. A pattern of one minute light pulses produced uniform pulses of increased NO concentration of one minute duration. A linear relationship exists between NO surface concentration and photon flux, and this relationship can be used to tune the material response.     

Hydrophilic nature and sorption-diffusion properties of nanocomposite hybrid polysulfone films

Hybrid nanocomposite films containing silica (??11.4 wt.%) or titania (??18.8 wt.%) in the polymer matrix were prepared by the sol-gel method using the hydrolytic polycondensation of tetraethoxysilane and tetrabutoxysilane in a THF solution of aromatic polymer, polysulfone (PSF). The influence of the oxide nature and the film composition on the structure, the interaction of the polymer with oxides, hydrophilicity, and sorption-diffusion properties of the hybrid films were studied by FTIR spectroscopy, atomic force microscopy, dynamic light scattering, and a complex of other physicochemical methods. The absence of chemical or intermolecular hydrogen bonds between the polymer and oxide particles in the PSF films was shown. The average size of the oxides (SiO₂, ??20 nm; TiO₂, ??90 nm) in the films and roughness of their surface (??0.2?C0.8 nm) were determined. The introduction of oxides into the polymer matrix increases the hydrophilic properties and the ability of the PSF films to swell in water; the diffusion coefficients of water and permeability of water vapor in the PSF films also increase. Titania also induces a more considerable change in the structure of the polymer matrix and more strongly affects the sorption-diffusion properties of the hybrid films in aqueous solutions of THF. All prepared nanocomposite films PSF/SiO₂ and PSF/TiO₂ are capable of extracting an organic component from aqueous solutions and can be used as sorbents and membrane films for the removal of organic substances from the aqueous medium.     

以两亲性共聚物为模板溶胶-凝胶法制备WO3多孔薄膜及其 氢致变色特性的研究

报道了以六氯化钨为原料, 以两亲性的无规共聚物聚苯乙烯-co-聚烯丙醇(PS-co-PAAL)和三嵌段共聚物聚氧乙烯-b-聚氧丙烯-b-聚氧乙烯(PEO-b-PPO-b-PEO)为模板, 采用溶胶-凝胶法制备了WO3多孔薄膜. 利用热重分析仪(TGA)、粉末X射线衍射仪(XRD)、扫描电子显微镜(SEM)、原子力显微镜(AFM)等表征手段, 研究了模板和热处理温度对薄膜孔结构的影响; 并通过H2敏测试以及利用紫外可见分光光度计(UV), 研究了薄膜的氢敏性能和着色前后的透射光谱. 结果表明, 以无规共聚物PS-co-PAAL为模板制得的WO3薄膜, 经400 ℃热处理后, 可得到呈交联网状的多孔结构, 并表现出最佳的氢致变色性能.     

Spontaneous catalytic generation of nitric oxide from S-nitrosothiols at the surface of polymer films doped with lipophilic copperII complex

A new approach for preparing potentially more blood-compatible nitric oxide (NO)-generating polymeric materials is described. The method involves creating polymeric films that have catalytic sites within (lipophilic copper(II) complex) that are capable of converting endogenous S-nitrosothiols present in blood (S-nitrosoglutathione (GSNO), S-nitrosocysteine (CysNO), etc.) to NO. The catalytic NO generation reaction involves the initial reduction of Cu(II) to Cu(I) within the complex by appropriate reducing agents (e.g., thiolates or ascorbate), followed by the reduction of S-nitrosothiols to NO by the Cu(I) complex at the polymer/solution interface. The NO fluxes observed when PVC or polyurethane films containing the copper(II) complex are placed in solutions containing physiological levels of nitrosothiols (muM levels) reach ca. 8 x 10-10 mol cm-2 min-1, greater than that produced by normal endothelial cells that line all healthy blood vessels. It is thus anticipated that this spontaneous catalytic generation of NO from endogenous nitrosothiols will render such polymeric materials more thromboresistant when in contact with blood in vivo.     

Effect of crystallinity and flexibility on the photodegradation of polyurethanes

Using fluorescence spectroscopy and gel content measurement, the photolysis of simple polyurethanes based on methylene 4,4′-diphenyldiisocyanate (MDI) is shown to depend on both the flexibility and crystallinity of the polymer. Polyurethane films based on MDI and 1,12-dodecanediol (MDI-12) can be either annealed or quenched to yield a semicrystalline (as measured by DSC and X-ray diffraction) or amorphous film, respectively. In the case of the quenched (amorphous) film, photolysis yields an ortho photo-Fries product whereas the annealed (semicrystalline) film does not. Similarly, for a given photolysis time the annealed film generates a lower extent of crosslinked gel. In addition, photolysis of amorphous polyurethane films derived from MDI and ethylene oxide oligomers shows that for relatively inflexible polymers with only three ethylene oxide segments, little or no ortho photo-Fries rearrangement products are generated upon photolysis. In contrast, photolysis of more flexible polyurethane films with approximately 13 ethylene oxide linkages yields the ortho photo-Fries product. Apparently, for aromatic diisocyanate based polyurethanes, the extent and mechanism of degradation is directly dependent on the crystallinity and main-chain flexibility of the polymer.     

The stability of high refractive index polymer materials for high-density planar optical circuits

Owing to the structural flexibility, easy processing and fabrication capabilities, polymers are being increasingly attractive for a variety of optical applications. In order to increase the integration density of such optical circuits, higher index contrasts and, thus, polymers with considerably higher refractive index are essentially needed. An organometallic polymer and a conventional epoxy material are combined to form a compatible high index material. When cured at elevated temperatures, the organometallic polymer decomposes to form a highly dispersed metal oxide phase that imparts high index properties to the polymer films. These hybrid high refractive index polymer films must be stable in patterning of optical waveguide structure for photonic manufacturing. In this paper, we report the stability and optical characterization study of a modified organometallic high refractive index polymer film in manufacturing of optical waveguide devices.     

A study on the plasma polymerization of some cyano-containing compounds and their electrical properties

Plasma polymerization of some cyano-containing organic compounds was carried out at 13.56 MHz from the gas phase. The resulting polymer films were smooth and pinhole free. The electrical conductivities of the polymer films varied from 10^?12 to 10^?7 S cm^?1 depending upon which cyano-containing monomer was used. The Al/polymer film/ITO (indium-tin oxide) sandwich cells made from the films demonstrated a photovoltaic effect, and some of them showed good rectifying behavior. Infrared spectroscopy (IR) and ultraviolet spectroscopy (UV) were utilized to characterize the structure of the product polymers. The effects of the original structure in the starting monomers on the structure of the resulting polymers are investigated. The influence of incident light intensity on the photovoltaic characteristics was also investigated.     

Characterization of poly(2,6-diphenyl-p-phenylene oxide) films as adsorbent for microfabricated preconcentrators

This work aims at evaluating poly(2,6-diphenyl-p-phenylene oxide) (Tenax TA), in the form of thin films, as an adsorbent material for various analytical applications. The physical properties of the polymer were studied with regard to surface topography, crystal structure, and thermal stability. Films deposited from solution at different substrate temperatures were studied and compared to the granular form of the polymer. It was found that Tenax TA deposited from solution have a different topography compared to their granular counterpart. The films possess a complex phase composition that includes crystalline and amorphous phases. The films showed high thermal stability (400 °C) similar to the granular form. The adsorption performance of the polymer compared to other possible adsorbent films such as polydimethylsiloxane (PDMS) and layer-by-layer assembled gold nanoparticles (GNPs) were also investigated. Representative volatile organic compound samples were used to compare the adsorption properties of Tenax TA films to that of the granules.     

MOCVD-derived highly transparent, conductive zinc- and tin-doped indium oxide thin films: precursor synthesis, metastable phase film growth and characterization, and application as anodes in polymer light-emitting diodes

Four diamine adducts of bis(hexafluoroacetylacetonato)zinc [Zn(hfa)(2).(diamine)] can be synthesized in a single-step reaction. Single crystal X-ray diffraction studies reveal monomeric, six-coordinate structures. The thermal stabilities and vapor phase transport properties of these new complexes are considerably greater than those of conventional solid zinc metal-organic chemical vapor deposition (MOCVD) precursors. One of the complexes in the series, bis(1,1,1,5,5,5-hexafluoro-2,4-pentadionato)(N,N'-diethylethylenediamine)zinc, is particularly effective in the growth of thin films of the transparent conducting oxide Zn-In-Sn-O (ZITO) because of its superior volatility and low melting point of 64 degrees C. ZITO thin films with In contents ranging from 40 to 70 cation % (a metastable phase) were grown by low-pressure MOCVD. These films exhibit conductivity as high as 2900 S/cm and optical transparency comparable to or greater than that of commercial Sn-doped indium oxide (ITO) films. ZITO films with the nominal composition of ZnIn(2.0)Sn(1.5)O(z)() were used in fabrication of polymer light-emitting diodes. These devices exhibit light outputs and current efficiencies almost 70% greater than those of ITO-based control devices.     

Electrocatalytic oxidation of nitric oxide at indium hexacyanoferrate film-modified electrodes

The electrocatalytic oxidation of nitric oxide (NO) by indium (III) hexacyanoferrate (III) films has been studied. These films are electrodeposited onto glassy carbon electrodes through potential cycling in acidic solutions containing a potassium electrolyte, indium (III), and potassium hexacyanoferrate. The resulting modified electrodes exhibit a reversible redox response ascribed to the oxidation/reduction of iron atoms presents in the electrodeposited film. The films have a potent and persistent electrocatalytic activity towards NO oxidation at neutral pH. The electrocatalytic oxidation of NO takes place at potentials around +0.75 V which represents a moderate diminution in the overpotential. In addition, interferences due to the presence of nitrate and nitrite have been significantly reduced. According to these results, the described modified electrodes have been used as sensors for the determination of NO generated by decomposition of a typical NO-donor, such as S-nitroso- N -acetyl- d, l -penicillamine (SNAP).     

A high activity photocatalyst of hierarchical 3D flowerlike ZnO microspheres: synthesis, characterization and catalytic activity

This contribution reports the design, preparation, and characterization of nanostructured hybrid films of silver nanoparticles (AgNPs) and a tailored nitric oxide (NO) photodonor. They were achieved by exploiting effective interfacial interactions between an amino-terminated NO photodonor spread onto water surface and naked AgNPs dissolved in the water subphase. The morphology, the spectroscopic features, and the interaction between the two components in the floating films at the air/water interface were inspected by Brewster Angle Microscopy, UV-Vis reflection, and polarization-modulation infrared reflection-absorption spectroscopy. AgNPs and the NO photodonor were successfully transferred onto hydrophobized quartz substrates by horizontal lifting deposition and the resulting multilayer films were characterized by UV-Vis absorption spectroscopy and transmission electron microscopy, respectively. The results obtained showed the presence of both isolated AgNPs and assemblies of AgNPs having nanodimensional character in the films. The photochemical properties of the NO photodonor were well preserved in the hybrid multilayers. In fact, they were able to release NO under visible light excitation, as unambiguously demonstrated by the direct and in real-time monitoring of this transient species using an ultrasensitive electrode, and the transfer of the released NO to a protein such as myoglobin.     

Photoelectrochemical study of organic–inorganic hybrid thin films via electrostatic layer-by-layer assembly

The stepwise assembly of negatively charged organic molecules (poly(sodium 4-styrenesulfonate) (PSS) or tetrasodium-meso-tetra(4-sulfonatophenyl) porphine (TPPS)) and positively charged TiO₂ colloids on pretreated substrate surfaces utilizing the layer-by-layer (LbL) approach was investigated. The step-by-step formation of these films was studied by UV–vis spectrophotometry and electrochemistry. Photocurrent was generated upon light irradiation of the hybrid thin films assembled on fluorine-doped tin oxide (FTO) conducting glass, which increased linearly as the deposited bilayers increased. In addition, compared to PSS/TiO₂ hybrid thin films, the enhancement of the generated photocurrent and the photocurrent response within the wavelength range from 400 to 450 nm were observed in the TPPS/TiO₂ hybrid thin films. This was attributed to the dye-sensitized effect of the layered TPPS molecules. It was demonstrated that electrostatic LbL films were attractive systems for the photoelectrochemical investigation, and the control of the generated photocurrent could be achieved by the structure of the multilayered films.     

Tin oxide coating on polytetrafluoroethylene films in aqueous solutions

Polytetrafluoroethylene (PTFE) films were successfully coated with tin oxide in aqueous solutions. Tin oxide was crystallized in the solution and formed nanocrystal coatings on the polymer films. The coatings consisted of SnO₂ and SnO crystals. They were assemblies of tin oxide nanosheet of about 10 to 50 nm in size and about 5 nm in thickness. The nanocrystal films can be exfoliated from the PTFE substrates. Tin oxide nanocrystal films had a rough liquid surface and a dense substrate‐side surface. Transparency of PTFE films coated with tin oxide was same as that of bare PTFE films in the range from 400 to 800 nm. The PTFE films coated with tin oxide nanocrystals can be pasted on desired substrates. Copyright © 2009 John Wiley & Sons, Ltd.     

Self‐healing of poly(propylene oxide)‐polybenzoxazine thermosets by photoinduced coumarine dimerization

In this work, a self‐healing strategy for poly(propylene oxide)s bearing coumarine‐benzoxazine units (PPO‐CouBenz)s based on light induced coumarine dimerization reactions is described. Four different types of poly(propylene oxide) amines with molecular weights ranging from 440 to 5000 Da were reacted with formaldehyde and 4‐methyl‐7‐hydroxycoumarin to yield desired (PPO‐CouBenz)s. The crosslinked polymer films were prepared by solvent casting of various compositions of PPO‐CouBenzs in chloroform followed by thermal ring opening reaction of benzoxazine groups at 210–240 °C. Thermal curing and thermal stability of the initial PPOs and final products were investigated. Using allyl benzoxazine in the formulation, it was demonstrated that the toughness of the films was improved. Photoinduced healing of coumarin‐based cured PPO‐CouBenz polymer films was investigated. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 2911–2918     

Photostability of pseudoisocyanine J aggregates in polymer films and ways of its improvement

The photostability of J aggregates of the pseudoisocyanine dye in polyvinylpyrrolidone (PVP) and poly(vinyl alcohol) (PVA) polymer films under continuous irradiation with visible light was investigated. The decay of J aggregates in PVP is predominantly due to the reaction of photooxidation with singlet oxygen generated by triplet-state pseudoisocyanine dimers. Unlike the case of PVP, J aggregates in PVA demonstrate significantly higher photostability because of a lower PVP permeability for oxygen. A significant improvement in the photostability of J aggregates is achieved by the introduction of scavengers of singlet oxygen into the polymer films.     

Photochromism and electrochemistry of a dithienylcyclopentene electroactive polymer

A bifunctional substituted dithienylcyclopentene photochromic switch bearing electropolymerisable methoxystyryl units, which enable immobilization of the photochromic unit on conducting substrates, is reported. The spectroscopic, electrochemical, and photochemical properties of a monomer in solution are compared with those of the polymer formed through oxidative electropolymerization. The electroactive polymer films prepared on gold, platinum, glassy carbon, and indium titanium oxide (ITO) electrodes were characterized by cyclic voltammetry, X-ray photoelectron spectroscopy (XPS), and atomic force microscopy (AFM). The thickness of the films formed is found to be limited to several monolayer equivalents. The photochromic properties and stability of the polymer films have been investigated by UV/vis spectroscopy, electrochemistry, and XPS. Although the films are electrochemically and photochemically stable, their mechanical stability with respect to adhesion to the electrode was found to be sensitive to both the solvent and the electrode material employed, with more apolar solvents, glassy carbon, and ITO electrodes providing good adhesion of the polymer film. The polymer film is formed consistently as a thin film and can be switched both optically and electrochemically between the open and closed state of the photochromic dithienylethene moiety.     

Synthesis and properties of polyvinylpyrrolidone films containing iron nitrosyl complexes as nitric oxide (NO) donors with antitumor and antiseptic activities

New homogeneous water-soluble polyvinylpyrrolidone composites containing iron sulfur nitrosyl complexes as nitric oxide donors with antitumor and antiseptic activities were synthesized. The morphology of the composites in the solid state was examined by X-ray diffraction and scanning electron microscopy. The study by small-angle X-ray scattering showed that samples of the composites do not contain 10–100-nm aggregates and that iron sulfur nitrosyl complexes are uniformly distributed in polymer matrices. The percentage of NO-releasing iron sulfur nitrosyl complexes in the composites was determined by ESR spectroscopy. An amperometric analysis demonstrated that the polymer composites decompose to yield NO within a few seconds after the dissolution in water without additional thermal and photoactivation. The dependences of the amount of NO and the maximum level of NO release on the duration of the storage of aqueous solutions for all of the synthesized films were determined at pH 7.0. Some of the synthesized polymer composites retain NO-donor activity of the starting pharmacologically active iron nitrosyl complexes and can be recommended to be used as targeted delivery systems of this class of compounds to biological targets.     

Perfluorocarbon thin films and polymer brushes on stainless steel 316 L for the control of interfacial properties

Perfluorocarbon thin films and polymer brushes were formed on stainless steel 316 L (SS316L) to control the surface properties of the metal oxide. Substrates modified with the films were characterized using diffuse reflectance infrared Fourier transform spectroscopy (DRIFT), contact angle analysis, atomic force microscopy (AFM), and cyclic voltammetry (CV). Perfluorooctadecanoic acid (PFOA) was used to form thin films by self-assembly on the surface of SS316L. Polypentafluorostyrene (PFS) polymer brushes were formed by surface-initiated polymerization using SAMs of 16-phosphonohexadecanoic acid (COOH-PA) as the base. PFOA and PFS were effective in significantly reducing the surface energy and thus the interfacial wetting properties of SS316L. The SS316L control exhibited a surface energy of 38 mN/m compared to PFOA and PFS modifications, which had surface energies of 22 and 24 mN/m, respectively. PFOA thin films were more effective in reducing the surface energy of the SS316L compared to PFS polymer brushes. This is attributed to the ordered PFOA film presenting aligned CF(3) terminal groups. However, PFS polymer brushes were more effective in providing corrosion protection. These low-energy surfaces could be used to provide a hydrophobic barrier that inhibits the corrosion of the SS316L metal oxide surface.