脂肪醇聚醚产品及脂肪醇羟值的快速测定

以4-二甲氨基吡啶为催化剂,过量乙酸酐为乙酰化试剂,吡啶为溶剂,用电位滴定法快速测定脂肪醇聚醚产品及脂肪醇羟值,并对催化剂、反应条件、系统的适应性进行了探讨。用该方法对5种不同羟值的脂肪醇聚醚及脂肪醇样品进行了测定,测定结果的相对标准偏差小于0.5%(n=6),且测定结果与国标法测定结果相符合,相对误差在±1%之内。     

(R)-3-叔丁基二甲基硅氧丁基苯硫醚的合成方法改进

以4-(二甲氨基)吡啶为催化剂,通过(R)-3-叔丁基二甲基硅氧丁醇与甲磺酰氯之间的改进烷基磺酰化反应得到(R)-3-叔丁基二甲基硅氧丁基甲磺酸酯(2b,收率98%),2b再与苯硫酚钠反应生成(R)-3-叔丁基二甲基硅氧丁基苯硫醚(3,总收率89%)。2和3的结构经1H NMR,IR和MS表征。     

4-氨基吡啶合成方法改进

4-氨基吡啶合成方法改进;甲酰胺基吡啶;降解;水解     

4-二甲氨基吡啶手性类似物2-[2-(4-二甲氨基吡啶基)]环己醇的合成

从2-[2-(4-氯吡啶基)]环己酮出发,经NaBH4还原,然后再与二甲胺水溶液反应得到消旋的2-[2-(4-二甲氨基吡啶基)]环己醇,采用(L)-DTTA(二对甲基苯甲酰基酒石酸)进行拆分得到对映纯的路易斯碱催化剂4-二甲氨基吡啶类似物(1R,2S)-2-[2-(4-二甲氨基吡啶基)]环己醇.     

SO3H-功能化离子液体的合成及用于催化酯化反应的研究

采用两步法制备了一种基于4-二甲氨基吡啶(DMAP)的SO3H-功能化Brnsted酸性离子液体,并将其应用于催化1,4-丁二醇与乙酸的酯化反应。DMAP与1,3-丙烷磺酸内酯(PS)反应生成单一的两性离子化合物,收率接近100%。该离子液体对1,4-丁二醇与乙酸的酯化反应催化活性较高,在温度为40℃时酯化率可达88.1%,选择性为100%,催化剂易与产物分离,且可以循环使用。     

羟值的快速测定法

非离子表面活性剂的生产和应用日益广泛。聚氧乙烯型非离子表面活性剂是非离子表面活性剂中品种最多、产量最大、地位最重要的一类。国标法规定的非离子表面活性剂聚乙氧基化衍生物产品羟值的测定方法为乙酐法和邻苯二甲酸酐法。国标法中酯化过程需要回流反应60min，耗时较长。     

高效液相色谱法测定烯草酮合成废液中4-二甲氨基吡啶含量

采用高效液相色谱法测定烯草酮合成废液中4-二甲氨基吡啶含量,使用BDS Hypersil C18不锈钢柱(250mm×4.6mm),以甲醇∶水∶磷酸=60∶39.75∶0.25为流动相,使用紫外检测器,在波长254nm下进行测定。实验测定4-二甲氨基吡啶加标回收率为97.7%,变异系数为3.33%,线性相关系数为0.9994。     

4-二甲氨基吡啶催化的1,3-二酮与3-丁炔-2-酮的苯环化反应

在4-二甲氨基吡啶(DMAP)催化下, 1,3-二酮与3-丁炔-2-酮可以区域选择性地合成四取代的苯, 该方法具有反应条件温和和操作简单等优点, 产物的结构通过IR, 1H NMR, 13C NMR, HRMS确证.     

4-羟甲基吡啶－水红移氢键的密度泛函理论研究

使用密度泛函理论B3LYP方法和6-311++G**基函数对4-羟甲基吡啶与水形成的1:1和1:2（摩尔比）氢键复合物进行了理论计算研究,分别得到稳定的4-羟甲基吡啶－H₂O和4-羟甲基吡啶－(H₂O)₂氢键复合物3个和8个。经基组重叠误差和零点振动能校正后,最稳定的1:1和1:2氢键复合物的相互作用能分别为-20.536和-44.246 kJ/mol。振动分析显示O-H···N(O)氢键的形成使复合物中O-H键对称伸缩振动频率红移(减小)。自然键轨道分析表明,4-羟甲基吡啶与水形成最稳定的1:1和1:2氢键复合物时,分子间电荷转移分别为0.02642 e 和0.03813 e 。含时密度泛函理论TD-B3LYP/ 6-311++G**计算显示,相对于4-羟甲基吡啶单体分子,氢键H-OH···N和H-OH···OH的形成分别使最大吸收光谱波长兰移8~16纳米和红移4~11纳米。     

合成3-(2-吡啶氨基)丙酸乙酯的工艺改进

以2-氨基吡啶(2)和丙烯酸乙酯(3)为起始原料,经一步反应合成了凝血酶因子抑制剂达比加群酯的关键中间体3-(2-吡啶氨基)丙酸乙酯,其结构经1H NMR和ESI-MS确证.最佳反应条件为:2 120 mmol,n(2)∶n(3) =1.00∶1.08,于100℃回流反应24h,收率79.6％.     

Poly{ [4-（hydroxyl）（tosyloxyl）iodo]styrene} Promoted Halotosyloxylation Reaction of Alkynes

Halotosyloxylation reaction of alkynes with iodine or NBS or NCS was efficiently promoted by the poly { [4-(hydroxyl)(tosoyloxyl)iodo]styrene }.     

Preparation of Poly(vinyl alcohol) Microspheres Based on Droplet Microfluidic Technology

A new method for preparing poly (vinyl alcohol) (PVA) microspheres was developed by using droplet microfluidic technology. In the microfluidic chip, a large number of uniform, monodispersed PVA droplets were prepared quickly and continuously by using droplet formation technology, and the droplet preparation speed reached 7 per second. The size of the PVA droplets could be controlled by changing the injection flow rate of the two-phase fluid and the width of microfluidic channel. Then the PVA microspheres were formed by physical crosslinking. This method has high preparation efficiency and good monodispersity of the obtained microspheres. Moreover, the process does not require the incorporation of chemical crosslinking agents, avoiding interference with the inclusion material, and is well suited for applications such as drug carrier.     

Comparative Studies on Mass Spectrometric Fragmentation of Linear Chiral Secondary Alcohols （ R ） -1-（4-Alkylphenyl） and （ R ） -1- （ 4-Alkoxyphenyl/Alkylthiophenyl ） Alcohols

Introduction Chiralsecondaryalcoholsareveryimportantinter mediatesinorganicsynthesis.Theyaregenerallypre paredviachemicalorenzymaticresolutionofracemic secondaryalcohols[1—4],chemicalorenzymaticasym metricreductionofprochiralketones[5—7],andasym metrica…     

The negative biodegradation of poly(vinyl alcohol) modified by aldehydes

Due to the wide application of PVA acetals, the biodegradation of PVA modified by formaldehyde, n-butyraldehyde, glyoxaldehyde and glutaraldehyde was conducted in an intensive biodegradation environment. Spectrophotometric analysis and weight loss were used to determine the biodegradation of PVA, and the changes of the mechanical properties of PVA acetals were also studied.An obvious decrease in biodegradation levels of all the modified samples was found, and a decrease in biodegradation level with increasing degree of acetals of PVA. The biodegradation of poly(vinyl formal) is better than poly(vinyl butyral) with the same degree of acetals whereas the biodegradation levels of poly(vinyl glyoxal) are lower than poly(vinyl glutaral) which has the same degree of crosslinking. The difference between the FT-IR of the samples before and after biodegradation indicated scission of residual PVA chain during the process.     

聚乙烯醇-碘复合物在水溶液中的形成

聚乙烯醇(PVA)在碘-碘化钾混合水溶液中能形成蓝色复合物,该复合材料在人们日常生活中已广泛应用.本文综述了在稀溶液条件下聚乙烯醇-碘复合物的形成,并对其复合物形成的可能影响因素,如:PVA的分子量、链结构的规整度、1,2-羟基结构、支链以及浓度、添加其它物质和反应时间等,进行了系统论述.从聚集模型观点看,在复合物中,碘主要是以线性多聚碘负离子形式存在的,如:T3-和I5-等;而PVA链通过分子间氢键作用形成链间聚集将多聚碘负离子包裹在内而形成复合物.     

Preparation and fluorescent properties of poly(vinyl alcohol) bearing coumarin

A novel water‐soluble fluorescent material was prepared via ring‐opening reaction between 4‐methyl‐7‐(2,3‐expoxypropoxy) coumarin (MEC) and poly(vinyl alcohol) (PVA). The fluorescent behaviors of this material (PVA–MEC) in solution, solid and film were studied in detail. The results showed that the fluorescence of PVA–MEC arose from isolated dye molecules and had a good film forming ability. In addition, the effects of acid/base environments on PVA–MEC were studied and the results showed that it was less affected by environment than 7‐HMC. Moreover, relative fluorescence intensity of PVA–MEC had an excellent linear response in the temperature range of 0–60°C. These observations suggest that PVA–MEC is an excellent fluorescent macromolecular material with a convenient method of preparation and had a good water‐soluble ability. Copyright © 2007 John Wiley & Sons, Ltd.     

Solid‐state 13C and 129Xe NMR study of poly(vinyl alcohol) and poly(vinyl alcohol)/lactosilated chitosan gels

Dry and hydrated poly(vinyl alcohol) (PVA) gels with 55% (a‐PVA) and 61% (s‐PVA) syndiotacticity and related PVA/lactyl chitosan (LC) blends have been investigated with ¹²⁹Xe and cross‐polarization/magic‐angle‐spinning ¹³C NMR techniques. Although the dry gels exhibit two broad ¹²⁹Xe resonances in the slow‐to‐intermediate exchange limit, both hydrated gels show three resonances. The corresponding dry blends exhibit two signals, the chemical shifts and line widths of which change with respect to those of pure PVA, whereas one (a‐PVA/LC) or two (s‐PVA/LC) signals appear in the spectra of the hydrated blends. A comparative analysis of the data demonstrates that LC rearranges the domains of the polymeric matrix in both the dry and hydrated blends according to the syndiotacticity of the PVA chains. Information on the molecular motions of the amorphous and swollen polymeric domains in the kilohertz range has been obtained from an analysis of the spin‐lattice relaxation times. These data indicate that the dynamics and arrangement of the PVA chains in the gels are strongly affected by their tacticity and the addition of the copolymer LC. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 3123–3131, 2003     

Surface Properties of Poly(vinyl alcohol) with Iron(III)chloride Before and After UV-Irradiation

Summary: Surface properties of poly(vinyl alcohol) (PVA) with low content of FeCl₃ (1, 5 wt.%) were studied by measurements of contact angles and atomic force microscopy. The results of contact angles and the surface free energy calculations revealed that the hydrophilicity of the surface of PVA films depended on the content of iron (III) chloride in these polymeric films. Introduced salt also affected photochemical reactions in poly(vinyl alcohol). Photooxidation of PVA was more effective in the presence of FeCl₃ because of formation of reactive chlorine atoms, which were capable of initiating new reactions. Also the morphology and roughness parameters of PVA film changed when iron (III) chloride was added.     

CE of poly(amidoamine) succinamic acid dendrimers using a poly(vinyl alcohol)-coated capillary

Various generations (G1-G8) of negatively charged poly(amidoamine) (PAMAM) succinamic acid dendrimers (PAMAM-SAH) were analyzed by CE using a poly(vinyl alcohol)-coated capillary. Due to its excellent stability and osmotic flow-shielding effect, highly reproducible migration times were achieved for all generations of dendrimer (e.g., RSD for the migration times of G5 dendrimer was 0.6%). We also observed a reverse trend in migration times for the PAMAM-SAH dendrimers (i.e., higher generations migrated faster than lower generation dendrimers) compared to amine-terminated PAMAM dendrimers reported in the literature. This reversal in migration times was attributed to the difference in counterion binding around these negatively charged dendrimers. This reverse trend allowed a generational separation for lower generation (G1-G3) dendrimers. However, a sufficient resolution for the migration peaks of higher generations (G4-G5) in a mixture could not be achieved. This could be due to their nearly identical charge/mass ratio and dense molecular conformations. In addition, we show that dye-functionalized PAMAM-SAH dendrimers can also be analyzed with high reproducibility using this method.     

合成(R)-2-异戊氧基丙醇的新方法

以(R)-1,2-丙二醇为原料,经伯醇羟基保护、仲醇O-异戊基取代、脱羟基保护三步反应合成了手性醇(R)-2-异戊氧基丙醇,其结构经NMR和MS确证.