Zeolite ZSM-5 containing copper ions: The effect of the copper salt anion and NH<Subscript>4</Subscript>OH/Cu<Superscript>2+</Superscript> ratio on the state of the copper ions and on the reactivity of the zeolite in DeNO<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript>

Isotherms of copper cation sorption by H-ZSM-5 zeolite from aqueous and aqueous ammonia solutions of copper acetate, chloride, nitrate, and sulfate are considered in terms of Langmuir’s monomolecular adsorption model. Using UV-Vis diffuse reflectance spectroscopy, IR spectroscopy, and temperatureprogrammed reduction with hydrogen and carbon monoxide, it has been demonstrated that the electronic state of the copper ions is determined by the ion exchange and heat treatment conditions. The state of the copper ions has an effect on the redox properties and reactivity of the Cu-ZSM-5 catalysts in the selective catalytic reduction (SCR) of NO with propane and in N₂O decomposition. The amount of Cu²⁺ that is sorbed by zeolite H-ZSM-5 from aqueous solution and is stabilized as isolated Cu²⁺ cations in cationexchange sites of the zeolite depends largely on the copper salt anion. The quantity of Cu(II) cations sorbed from aqueous solutions of copper salts of strong acids is smaller than the quantity of the same cations sorbed from the copper acetate solution. When copper chloride or sulfate is used, the zeolite is modified by the chloride or sulfate anion. Because of the presence of these anions, the redox properties and nitrogen oxides removal (DeNO _x ) efficiency of the Cu-ZSM-5 catalysts prepared using the copper salts of strong acids are worse than the same characteristics of the sample prepared using the copper acetate solution. The addition of ammonia to the aqueous solutions of copper salts diminishes the copper salt anion effect on the amount of Cu(II) sorbed from these solutions and hampers the nonspecific sorption of anions on the zeolite surface. As a consequence, the redox and DeNO _x properties of Cu-ZSM-5 depend considerably on the NH₄OH/Cu²⁺ ratio in the solution used in ion exchange. The aqueous ammonia solutions of the copper salts with NH₄OH/Cu²⁺ = 6–10 stabilize, in the Cu-ZSM-5 structure, Cu²⁺ ions bonded with extraframework oxygen, which are more active in DeNO _x than isolated Cu²⁺ ions (which form at NH4OH/Cu2+ = 30) or nanosized CuO particles (which form at NH₄OH/Cu²⁺ = 3).     

Ion flotation of zinc using ethylhexadecyldimethylammonium bromide

Zinc ions react with the surfactant ethylhexadecyldimethylammonium bromide (EHDABr) to form a surface active sublate which can be removed from aqueous chloride solutions by ion flotation. A typical ion flotation procedure involves passing air through a 235-ml solution containing 5 ppm Zn²⁺, 2.0 M HCl, and 2.5 × 10^?3M EHDABr at a flow rate of 40 ml/min for 150 min. The procedure is simple and rapid. Cadmium, copper, lead, and nickel ions cause reductions of zinc flotation efficiencies of less than 2.5% under the experimental conditions.     

Studies on transport mechanism of Cr(VI) extraction from an acidic solution using liquid surfactant membranes

A mathematical model for analysing the extraction of Cr(VI) from aqueous acidic solution by emulsion liquid membrane using Aliquat 336 as extractant and NaOH as stripping agent has been presented. The existing models developed so far do not account for the existence of different forms of Cr(VI) ions in the aqueous phase depending on pH conditions. Accordingly, in the present model, reaction equilibrium has been considered instead of distribution coefficient to represent realistically the transport mechanism for this type of system through liquid surfactant membrane. Unlike other models, liquid–liquid equilibrium of sodium hydroxide-chloride of Aliquat 336 has also been considered. The carrier thus exists in the membrane phase in hydroxide and chloride forms and extraction of hexavalent chromium from the external phase proceeds by the two carriers. The validity of the model has been checked from comparison of the simulated curves and experimental data using chemical reaction equilibrium constant and D_eff/R² as fitting parameters.     

(Series Editor) Transform Techniques in Chemistry,P.R. Griffiths,D. Hercules (Eds.), in: Modern Analytical Chemistry Series,Plenum, New York,NY (1978), 385 pp. $47.40

Concentration potentials in zinc sulphate, copper sulphate, nickel sulphate and cobalt sulphate solutions across liquid membranes based on myristates and laurates of zinc, copper, nickel and cobalt and caprate and caprylate of copper have been studied in concentration cells in which the liquid membrane separates the two solutions of the same electrolyte. The behaviour of the cell with heavy metal soap liquid ion-exchange membranes becomes more and more nernstian as the number of carbon atoms in the hydrocarbon chain of the fatty acid soap increases. Concentration potential values with copper, zinc, nickel or cobalt soap follow the order of their insolubility in water. The failure to record the theoretical potentials as calculated by Nernst's equation has been explained by considering the transport of water across organic phase by hydrated ions and the dissolution of heavy metal soaps in aqueous solutions. Liquid membranes based on heavy metal myristate soaps when used in concentration cells could measure the activities of zinc, copper, nickel and cobalt ions in the concentration range of 10^?4–10^?1M.     

Transport of amino acids through liquid membranes III. The alkaline ion role

This paper discusses the alkaline ion (Na⁺) role in the uphill transport of amino acids through a bulk liquid membrane. The aqueous phases (source phase - S and receiving phase - R) are made up of equimolar concentrations of amino acid (4.38 mM p-aminobenzoic acid (PABA)) and alkaline ion (75 mM Na⁺). A chloroform solution containing 5 mM dibenzo-18-crown-6 (DB18C6) represents the bulk liquid membrane (M). The data obtained show that at the S-M interphase, the amino acid is coupled with the carrier via the H₃N⁺ group rather than being transported to the R-M interphase, where Na⁺ substitutes the amino acid. If Na⁺ is absent, the amino acid is transported to the opposite direction. These results support the hypothesis that the presence of Na⁺ ion in the aqueous phases assures the ‘biological’ direction of aminobenzoic acids transport through membranes.     

Nearly Complete Separation of Sodium Ion with a Liquid Membrame Incorporating Carboxylic Polyether Antibiotic Monensin

Abstract

The composition of a liquid membrane and the ion solution conditions were investigated for highly efficient transport of Na⁺ using a liquid membrane incorporating nonensin. As a result, Na⁺ in an aqueous solution could be nearly completely (more than 99 %) separated using a 2-fluoro-2′-nitrodiphenyl ether (FNDPE) liquid membrane containing monensin.     

Changes of electrochemical responses of the bulk solution species by thermotropic permeability of liquid crystalline membranes coated on electrodes

Liquid crystalline/polymer composite membrane-coated electrodes were prepared by casting a 1,2-dichloroethane solution of N-(4-ethoxybenzylidene)-4′-n-butylaniline (EBBA) and polycarbonate (PC) on an electrode surface. The temperature-dependence of the permeability of the EBBA/PC composite membrane on electrodes to Fe(CN)^3?₆ ion as a solution-phase redox ion was investigated by means of hydrodynamic voltammetry at a rotating disk electrode. The permeability changed with temperature over the range of the crystalline-nematic-phase transition temperature of EBBA. It is demonstrated that the observed temperature-dependence of the permeability reflects the thermotropic properties of EBBA in the EBBA/PC composite membrane. Furthermore, the dependence of the limiting current of the steady-state current-potential curves for the reduction of Fe(CN)^—₆ at the EBBA/PC composite membrane-coated electrode upon the membrane thickness, the blend ratio of EBBA and PC and the concentration of Fe(CN)^3?₆ in a bulk solution was examined in order to understand the transport process of Fe(CN)^?3₆ through the EBBA/PC composite membrane from the membrane/solution interface to the electrode/membrane interface. The transport process of Fe(CN)^3?₆ within the membrane was found to obey Fick's Law.     

Comparison of copper(II) ion-selective electrodes for measurements at micromolar concentrations

Four types of copper ion-selective electrodes have been tested for determining copper at concentrations below lO^-6 mol 1^l-1. None of the electrodes has a Nemstian response in dilute copper solutions in this concentration range, though their responses are linear in pCu buffer solutions. The causes of the deviations are a direct redox effect in the case of an electrode with a Cu_1.8,Se single crystal membrane, production of copper ions by oxidation of the membrane itself in Ag₂S—CuS membrane electrodes, and a combination of the two in the case of the R??i?ka Selectrode. The electrode potentials are affected by the oxygen content and pH of the sample solution and the condition of the membrane surface. Precision tests on two types of electrode are described.     

Properties and Applications of Cryptand‐22 Surfactant for Ion Transport and Ion Extraction

A non‐ionic cryptand‐22 surfactant consisting of a macrocyclic cryptand‐22 polar head and a long paraffinic chain (C₁₀H₂₁‐Cryptand‐22) was synthesized and characterized. The critical micellar concentration (CMC) of the cryptand surfactant in ROH/H₂O mixed solvent was determined by the pyrene fluorescence probe method. In general, the cmc of the cryptand surfactant increased upon decreasing the polarity of the surfactant solution. The cryptand surfactant also can behave as a pseudo cationic surfactant by protonation of cryptand‐22 or complexation with metal ions. Effects of protonation and metal ions on the cmc of the cryptand surfactant were investigated. A preliminary application of the cryptand surfactant as an ion‐transport carrier for metal ions, e.g., Li⁺, Na⁺, K⁺ and Sr²⁺, through an organic liquid‐membrane was studied. The transport ability of the cryptand surfactant for these metal ions was in the order: K⁺ ≥ Na⁺ < Li⁺ < Sr²⁺. A comparison of the ion‐transport ability of the cryptand surfactant with other macrocyclic polyethers, e.g., dibenzo‐18‐crown‐6, 18‐crown‐6 and benzo‐15‐crown‐5, was studied and discussed. Among these macrocyclic polyethers, the cryptand surfactant was the best ion‐transport carrier for Na⁺, Li⁺ and Sr²⁺ ions. Furthermore, a foam extraction system using the cryptand surfactant to extract the cupric ion was also investigated.     

Competitive transport of seven metal cations through bulk liquid membrane using 5,12-di(phenoxymethyl)-1,4-dioxa-7, 10-dithiacyclododecane-2,3-dione as carrier

The competitive metal ion transport of copper(II), cobalt(II), zinc(II), cadmium(II), silver(I), chromium(III) and lead(II) with a S-O donor compound was examined. Competitive transport experiments involving the metal cations from an aqueous source phase through an organic membrane into an aqueous receiving phase have been carried out using 5,12-di(phenoxymethyl)-1,4-dioxa-7,10-dithiacyclododecane-2,3-dione as the ionophore present in the organic phase. Fluxes and selectivities for competitive metal cations transport across bulk liquid membranes have been determined in a variety of chlorinated hydrocarbon and aromatic hydrocarbon solvents. The membrane solvents include: dichloromethane (DCM), chloroform (CHCl₃), 1,2-dichloroethane (1,2-DCE), and nitrobenzene (NB) and also in chloroform-dichloromethane (CHCl₃-DCM) and chloroform-nitrobenzene (CHCl₃-NB) binary mixtures. Although the selectivity for silver(I) cation in all of these organic solvents is fundamentally similar, but the most transport rate for Ag(I) was obtained in dichloromethane. The sequence of transport rate for silver ion in organic solvents was: DCM > CHCl₃ > 1,2-DCE > NB. A linear relationship was observed between the transport rate of silver ion and the composition of CHCl₃-DCM, but a non-linear behavior was observed in the case of CHCl₃-NB binary solution. The influence of the stearic, palmetic and oleic acids as surfactant in the membrane phase on the transport of the metal cations was also investigated.     

Synthesis and properties of noncyclic polyether compounds. Part V : The influence of acid and concentration of cations on the uphill transport rates of cations and selectivities through liquid membranes by synthetic,noncyclic polyether ionophores

The effects of acid and cation concentration on the uphill transport rates of cations and selectivities through chloroform liquid membrane by noncyclic polyether ionophores, which are pentaethylene glycol derivatives containing both 8-quinolyt and o-carboxylphenyl terminal groups, have been demonstrated. Using sulfuric, oxalic, or polyphosphoric acid in aqueous solution, the initial transport rates and the amount of cation transported by the ionophores after two days were larger than those using hydrochloric or nitric acid. Using picric acid, the amount of cation transported decreased greatly. It was confirmed that it decreased where an acid could easily be counter-transported by the ionophore through liquid membranes. On the other hand, it was found that the rates, amounts of cation transported, and selectivities, change with the changing of the cation concentration in the aqueous solutions. When the cation concentration in both aqueous solutions is high enough compared with the pH gradient between the two aqueous solutions, the rate, amount, and selectivity of the ionophore for potassium ion increases compared with when the cation concentration is low.     

Mediated electrochemical synthesis of copper nanoparticles in solution

Environmentally friendly mediated electrochemical synthesis of copper nanoparticles in the solution using a copper anode as a source of copper ions has been realized for the first time. It is shown that at the potential of the redox pair MV²⁺/MV?⁺ methylviologen MV²⁺ is able to mediate a reduction of Cu²⁺ ions in 60% aqueous DMF/0.1 M Bu₄NBF₄. Copper nanoparticles build large aggregates (200—250 nm) in the absence of a stabilizer. The use of polyvinylpyrrolidone as a stabilizer makes it possible to obtain smaller copper nanoparticles (20—50 nm) of spherical and oval shape and to characterize them by physicochemical methods.     

Separation and Preconcentration of Strontium from Calcium in Aqueous Samples by Supported Liquid Membrane Containing Crown Ether

Supported liquid membrane containing crown ether (DC18C6) and dinonylnaphthalenesulfonic acid (DNNS) is proposed for separation and preconcentration of strontium in an aqueous environmental sample. The effects of carriers in membrane on permeability and selectivity of Sr²⁺ were characterized. Crown ether has a key role in the selective transport of strontium ion while DNNS facilitates the transport of both Sr²⁺ and Ca²⁺. A strontium ion can be selectively transported to an acidic strip solution against its concentration gradient across the membrane. This SLM can be used as an efficient method for separation and preconcentration of strontium in a neutral aqueous sample.     

Highly selective transport of silver ion through a supported liquid membrane using calix[4]pyrroles as suitable ion carriers

Facilitated transport of silver ion across a supported liquid membrane (SLM) by calix[4]pyrroles, as selective ion carriers, dissolved in kerosene has been investigated. The influences of fundamental parameters affecting the transport of silver ion including ion carrier concentration in the membrane phase, thiosulfate concentration in strip phase, picric acid concentration in the feed phase, stirring speed of aqueous phases, type of membrane solvent and time of transport have been studied. In the presence of thiosulfate as a suitable metal ion acceptor in the strip phase and picrate ion as ion pairing agent in the source phase, transport of silver occurs almost quantitatively after 75 min. The selectivity and efficiency of silver transport from aqueous solution containing Cu²⁺, Mg²⁺, Ni²⁺, Ca²⁺, Zn²⁺, Pb²⁺, Co²⁺, Al³⁺, Hg²⁺, Cd²⁺, Fe³⁺, Fe²⁺ and Cr³⁺ were investigated.     

Ion-selective characteristics of heavy metal myristate liquid membrane electrodes

Liquid membrane electrodes of myristate soaps of heavy metals, namely copper, cadmium, zinc, nickel, cobalt, strontium and barium in a benzene-n-butanol mixture were prepared. Each electrode showed nernstian response in common metal ion test solution. The range of concentration of the test solution for the Nernstian behaviour lies between 10^?4 and 10^?1M. With a dissimilar metal ion in test solution the metal soap liquid membrane electrode indicates deviations from Nernst's equation depending on the nature of the metal ion, suggesting different selectivities for different ions. The selectivity ratios are therefore calculated.     

Surfactant-assisted transport of lead ion through a bulk liquid membrane containing dicyclohexyl-18-crown-6: efficient removal of lead from blood serum and sea water

The selective and efficient surfactant assisted transport of Pb²⁺ ions using a bulk liquid membrane composed of dicyclohexyl-18-crown-6, as a highly selective carrier, in chloroform solution is reported. In the presence of 6.0 × 10^?2 M P₂O₇ ^4? ions and 10^?3 M sodium dodecylsulfate, as suitable stripping agent and membrane/receiving phase interface modifier, respectively, in the receiving phase and 2.4 × 10^?3 M picric acid, as a counter ion in the source phase, the amount of lead transported across the liquid membrane after 5 h is 100.0 ± 1.1. The designed transport system was successfully applied to the removal of lead from sea water and blood serum samples.     

Membrane Transport of Pb(II) with a Cooperative Carrier Composed of Dibenzyldiaza‐18‐Crown‐6 and Palmitic Acid

A chloroform membrane system containing a given mixture of dibenzyldiaza‐18‐crown‐6 and palmetic acid was applied for transport of Pb²⁺ ions. The transport was capable of moving metal ions “uphill”. Thus, it was possible to follow the transfer of Pb(II) from the aqueous source phase to the organic layer and from the organic layer to the receiving phase. The effects of thiosulfate concentration in the receiving phase, palmetic acid and dibenzyldiaza‐18‐crown‐6 concentration in the organic phase on the efficiency of the transport system were examined. By using S₂O₃^2? ion as metal ion acceptor in the receiving phase, the amount of lead ion transport across the liquid membrane after 150 minutes is 96 ± 1.5%. The selectivity and efficiency of lead transport from aqueous solution containing Cu²⁺, Tl⁺, Ag⁺, Co²⁺, Ni²⁺, Mg²⁺, Zn²⁺, Hg²⁺, Cd²⁺, Ca²⁺ were investigated. In the presence of thiosulfate as a suitable masking agent in the source phase, the interfering effects of Ag⁺ and Cu²⁺ were diminished drastically.     

Isotope effects in the oxidative functionalization of methane in the presence of rhodium-containing homogeneous catalytic systems

The combined oxidation of carbon monoxide, CH₄, and CD₄ by molecular oxygen (¹⁶O₂ and ¹⁸O₂) in aqueous solutions of trifluoroacetic acid labeled with ¹⁸O in the presence of rhodium and copper compounds and potassium iodide has been studied. The distribution of ¹⁸O in isotopically substituted products suggests that oxygen entered into the methane molecule from an active oxidizing agent. This oxidizing agent was produced from molecular oxygen under the action of reagents and catalytic system components. The kinetic isotope effect observed for methane (k _H/k _D=3.9?4.3) suggests a nonradical character of the step at which the oxygen atom passes from an active oxidizing agent to the methane molecule or its fragments—transition-state components of the corresponding step.     

Mesoporous platinum hosts for electrodeliquidliquid – Triple phase boundary redox systems

Mesoporous metal hosts are attractive electrode materials for complex electrode reactions, for example those involving a system of two immiscible liquids. Here we show that a solution of tetraphenylporphyrianto manganese (MnTPP) in 4-(3-phenylpropyl)-pyridine (PPP) organic liquid can be immobilized into mesoporous platinum thin films electrodeposited from a liquid crystalline template. When immersed in an aqueous solution, the organic liquid remains immobilized inside the mesoporous platinum framework. Well-defined, stable, and reproducible ion transfer voltammograms are recorded. The effects of mesoporous platinum membrane thickness (volume), scan rate, and the type of aqueous electrolyte anion (for Cl⁻, , , CN⁻, SCN⁻ and ) are investigated. Mesoporous platinum is proposed as a very effective electrode material for liquidliquid anion sensing and for other applications of electrochemically driven liquidliquid redox systems.     

Solution state and complexing ability of 1,4-bis(amidomethylsulfinyl)butane toward iron(III), copper(II), cobalt(II), nickel(II), and manganese(II)

The solution state and thermodynamic stability of complexes of the new antituberculosis agent 1,4-bis(amidomethylsulfinyl)butane (L) with iron(III), copper(II), cobalt(II), nickel(II), and manganese(II) in an aqueous solution in the presence and in the absence of the nonionic surfactant Brij 35 were studied by spectrophotometry, pH potentiometry, NMR relaxation technique (T = 25 °C; variable ionic strength), and mathematical simulation. The geometry optimization of all structures was carried out by the molecular mechanics method MM2 in order to obtain data on coordination modes. In addition, the structure of 1,4-bis(amidomethylsulfinyl)butane was refined by the DFT/B3LYP/6-311++G(d,p) quantum chemical method using the IEFPCM model to take into account solvent effects. In an aqueous solution (in the concentration range of 1.3?10^–5—1?10^–3 mol L–1) and in the presence of Brij 35, 1,4-bis(amidomethylsulfinyl)butane exists as a neutral monomer. The Beer—Lambert—Bouguer law is obeyed in a wide concentration range for compound L in an aqueous solution, as well as in the presence of the surfactant, which can be used for the quantification of compound L. Iron(III), cobalt(II), and nickel(II) were shown to form 1: 1 mononuclear complexes with L; and copper(II) forms, 1: 1 and 2: 2 complexes. The presence of Brij 35 in the Cu²⁺—L system at a micellar concentration promotes the formation of a dinuclear complex.