A Stability-Indicating LC Assay Method for Pemetrexed Disodium

This present work describes the development of a stability-indicating high performance liquid chromatographic method for the quantitative determination of pemetrexed disodium. Pemetrexed disodium is an antifolate antineoplastic agent that exerts its action by disrupting folate-dependent metabolic processes essential for cell replication. The chromatographic separation was achieved on an ACE 3 C18 HPLC column using a mobile phase consisting of a mixture of buffer (solvent A) and organic modifier acetonitrile (solvent B). Forced degradation studies were performed on bulk sample of pemetrexed disodium using acid (0.5 N hydrochloric acid), base (0.5 N sodium hydroxide), oxidation (10% v/v hydrogen peroxide), heat (60 °C) and UV light (254 nm). Degradation of the drug substance was observed in base hydrolysis. Degradation product formed under acid and base hydrolysis was found to be starting material. The stressed samples were assayed using the developed LC method and the mass balance found was close to 99.5%, thus proving its stability-indicating power. The developed method was validated with respect to linearity, accuracy, precision and robustness.     

A Stability-Indicating LC Assay and Degradation Behavior of Temozolomide Drug Substances

This study deals with a stability indicating HPLC reverse phase method for quantitative determination of temozolomide. A chromatographic separation was achieved on an Inertsil ODS 3V, 250 × 4.6 mm ID, 5 μm column using mobile phase A (buffer 5 mL glacial acetic acid in 1,000 mL of Milli Q water ) and mobile phase B (methanol). Forced degradation studies were performed on bulk sample of temozolomide using acid (0.5 N hydrochloric acid), base (0.5 N sodium hydroxide), oxidation (10% v/v hydrogen peroxide), heat (60 °C) and UV light (254 nm). Degradation of the drug substance was observed in base hydrolysis and oxidation. Degradation product formed under these conditions was found to be Imp-A. When the stress samples were assayed, the mass balance was close to 99.5%. The sample solution was stable up to 48 h at 5 °C and mobile phase was found to be stable up to 48 h at 25 °C. The developed method was validated with respect to linearity, accuracy, precision, robustness and forced degradation studies prove the stability indicating power of the method.     

Development of an HPLC Assay Method for Lenalidomide

Chromatographic separation of lenalidomide and its impurities was achieved on an Inertsil ODS-3 V column using a mobile phase consisting of a mixture of buffer, acetonitrile and methanol in the ratio 80:8:12 v/v. Degradation studies were performed on bulk samples of lenalidomide subjected to 0.5 N hydrochloric acid, 0.5 N sodium hydroxide, 10% v/v hydrogen peroxide, heating to 60 °C and UV light at 254 nm. Degradation was observed only under base hydrolysis conditions. The developed LC method gave a mass balance close to 99.5%, proving it to be suitable for stability studies and was validated with respect to linearity, accuracy, precision and robustness.     

Development and validation of a stability-indicating method for determination of free sterols in the Asian medicinal leech Hirudo manillensis

A rapid, simple, sensitive, selective, precise and robust thin-layer chromatography densitometric method for the determination of free sterols in leech was developed and validated on silica gel layer using carbon tetrachloride-methanol-formic acid (9.5:1.5:0.55, v/v/v). Spectrodensitometric scanning was carried using a Camag TLC scanner III at 366 nm after spraying 2% methanolic sulphuric acid, which gave compact spots for cholesterol (R(F) = 0.35 ± 0.02). The regression analysis data for calibration plot implied a good linear relationship (r(2) = 0.99958) between response and concentration over the range 100-600 ng per spot with respect to peak area. The limits of detection and quantification were found to be 13.8 ± 0.51 and 45.01 ± 1.29 ng per spot, respectively. Validation was in accordance to the International Conference on Harmonization guidelines. Cholesterol was subjected to forced stress conditions of oxidation, hydrolysis and heat. Degradation products resulting from the forced stress did not interfere with detection because the degradant peaks were well separated from the cholesterol peak. The densitometric method can be regarded as stability-indicating and can be used for quality control assay of cholesterol in leech extract.     

A Stability-Indicating LC Method for Assay of Topotecan Hydrochloride

This paper describes the development of a stability-indicating high-performance liquid chromatographic (HPLC) method for quantitative determination of topotecan hydrochloride, a semi-synthetic derivative of camptothecin and anti-tumor drug with topoisomerase I-inhibitory activity. Chromatographic separation was achieved on a C₁₈ column with a mixture of phosphate buffer and acetonitrile as mobile phase. The method was validated for linearity, accuracy, precision, and robustness. Forced degradation studies were performed by treating bulk samples of topotecan hydrochloride with acid (0.5 M hydrochloric acid), base (0.5 M sodium hydroxide), oxidizing agent (10% v/v hydrogen peroxide), heat (60 °C), and UV light (254 nm).     

Stability indicating method for famotidine in pharmaceuticals using porous graphitic carbon column

A simple, sensitive and rapid HPLC method was developed and validated for the simultaneous determination of famotidine (FMT) and related impurities in pharmaceuticals. Chromatographic separation was accomplished within 10 min on a porous graphitic carbon (PGC) column using 50:50 v/v ACN-water containing 0.5% pentane sulphonic acid (PSA) as the mobile phase. Separation was achieved with a flow rate of 1 mL/min and a detection wavelength of 265 nm. The calibration curves were linear over a concentration range of 1.5-100 microg/mL. The intra- and interday RSDs (n = 5) for the retention times and peak area were all less than 2%. The method was sensitive with an LOD (S/N = 3) of 0.1 microg/mL for FMT, imp. C and 0.05 microg/mL for imp. 2, A and D. All recoveries were greater than 98%. The method was demonstrated to be precise, accurate and specific with no interference from the tablet ingredients and separation of the drug peak from the peaks of the degradation products (oxidative degradation and acid and base degradation). The results indicated that the proposed method could be used for the determination of FMT in commercial dosage forms and as a stability-indicating assay.     

Development and validation of a stability-indicating column high-performance liquid chromatographic assay method for determination of nebivolol in tablet formulation

A simple, precise, and accurate isocratic reversed-phase (RP) stability-indicating column high-performance liquid chromatographic (HPLC) assay method was developed and validated for determination of nebivolol in solid pharmaceutical dosage forms. Isocratic RP-HPLC separation was achieved on a Phenomenex Luna C8 (2) column (250 mm x 4.6 mm id, 5 microm particle size) using mobile phase composed of acetonitrile-pH 3.5 phosphate buffer (35 + 65, v/v) at a flow rate of 1.0 mL/min, and detection was performed at 280 nm using a photodiode array detector. The drug was subjected to oxidation, hydrolysis, photolysis, and heat to apply stress conditions. The method was validated for specificity, linearity, precision, accuracy, robustness, and solution stability. The method was linear in the drug concentration range of 40-160 microg/mL with a correlation coefficient of 0.9999. The repeatability relative standard deviation (RSD) for 6 samples was 0.69%, and the intermediate precision (RSD) for 6 samples was 1.39%. The accuracy (recovery) was between 98.57 and 99.55%. Degradation products produced as a result of stress studies did not interfere with detection of nebivolol, and the assay can thus be considered stability-indicating.     

A Validated and Stability-Indicating LC Assay Method for Valdecoxib

A gradient reversed-phase liquid chromatographic assay was developed for the quantitative determination of the non-steroidal anti-inflammatory drug valdecoxib. The developed method was also applicable to the determination of related substances in the bulk drug. Forced degradation studies were performed on bulk valdecoxib using acid (2.0 N hydrochloric acid), base (2.0 N sodium hydroxide), oxidation (6.0% v/v hydrogen peroxide), water hydrolysis, heat (60 °C) and photolysis. Mild degradation was observed using alkaline conditions and considerable degradation observed during oxidative stress. Chromatographic separation of process-related impurities and degradation products was achieved using a 5 micron Zorbax SB-CN LC column. The mobile phase consisted of aqueous potassium dihydrogen phosphate (pH 3.0) and acetonitrile. Stressed samples were assayed using the developed LC method and determination of the mass balance accounted for 99.5%, thus indicating the suitability of this stability-indicating method. Linearity, accuracy, precision and robustness have also been evaluated.     

A Stability-Indicating LC Method for Rimonabant

A simple, inexpensive and rapid isocratic LC method has been developed for the quantative determination of Rimonabant, an anti-obesity drug. The method can also be employed for the determination of Rimonabant and its impurities in the bulk drug. Degradation studies were performed on the bulk drug by heating to 60 °C, exposure to UV light at 254 nm, acid (0.5 N hydrochloric acid), base (0.5 N sodium hydroxide) and aqueous hydrolysis and oxidation with 3.0% v/v hydrogen peroxide. Considerable degradation was observed under oxidation conditions. Good resolution between the peaks corresponding to impurities produced during synthesis, degradation products and the analyte was achieved on a Phenomenex Gemini C18 LC column using a mobile phase consisting of a mixture of aqueous potassium dihydrogen phosphate (pH 3.0) and acetonitrile. The degradation samples were assayed against the reference standard of Rimonabant and the mass balance in each case was close to 99.5%. Validation of the method was carried out as per ICH requirements.     

Development and validation of a stability-indicating RP-HPLC method for determination of atomoxetine hydrochloride in tablets

This paper describes the development of a stability-indicating RP-HPLC method for the determination of atomoxetine hydrochloride (ATX) in the presence of its degradation products generated from forced decomposition studies. The drug substance was subjected to stress conditions of acid, base, oxidation, wet heat, dry heat, and photodegradation. In stability tests, the drug was susceptible to acid, base, oxidation, and dry and wet heat degradation. It was found to be stable under the photolytic conditions tested. The drug was successfully separated from the degradation products formed under stress conditions on a Phenomenex C18 column (250 x 4.6 mm id, 5 microm particle size) by using acetonitrile-methanol-0.032 M ammonium acetate (55 + 05 + 40, v/v/v) as the mobile phase at 1.0 mL/min and 40 degrees C. Photodiode array detection at 275 nm was used for quantitation after RP-HPLC over the concentration range of 0.5-5 microg/mL with a mean recovery of 100.8 +/- 0.4% for ATX. Statistical analysis demonstrated that the method is repeatable, specific, and accurate for the estimation of ATX. Because the method effectively separates the drug from its degradation products, it can be used as a stability-indicating method.     

Stability-Indicating LC Method for the Determination of Olmesartan in Bulk Drug and in Pharmaceutical Dosage Form

A novel stability-indicating LC assay method was developed and validated for quantitative determination of olmesartan in bulk drugs and in pharmaceutical dosage form in the presence of degradation products generated from forced degradation studies. An isocratic, reversed phase LC method was developed to separate the drug from the degradation products, using an Ace5-C18 (250 mm × 4.6 mm, 5 μm) column, and 50 mM ammonium acetate (pH-5.5 by acetic acid) and acetonitrile (70:30 v/v) as a mobile phase. The detection was carried out at the wavelength of 235 nm. The olmesartan was subjected to stress conditions of hydrolysis (acid, base), oxidation, photolysis and thermal degradation. Degradation was observed for olmesartan in acid, base and in 30% H₂O₂ conditions. The drug was found to be stable in the other stress conditions attempted. The degradation products were well resolved from the main peak. The percentage recovery of olmesartan ranged from (99.89 to 100.95%) in pharmaceutical dosage form. The developed method was validated with respect to linearity, accuracy (recovery), precision, specificity and robustness. The forced degradation studies prove the stability-indicating power of the method.

     

Multi-Matrix Approach for the Analysis of Bicalutamide Residues in Oncology Centers by HPLC–FLD

Cytostatics are toxic pharmaceuticals, whose presence in surfaces puts healthcare workers at risk. These drugs might also end up in hospital effluents (HWW), potentially damaging aquatic ecosystems. Bicalutamide is a cytostatic extensively consumed worldwide, but few analytical methods exist for its quantification and most of them require advanced techniques, such as liquid chromatography mass spectrometry (LC-MS), which are very complex and expensive for large monitoring studies. Therefore, a simple but reliable multi-matrix high performance liquid chromatographic method, with fluorescence detection, was developed and validated to rapidly screen abnormal concentrations of bicalutamide in HWW and relevant contamination levels of bicalutamide in indoor surfaces (>100 pg/cm²), prior to confirmation by LC-MS. The method presents good linearity and relatively low method detection limits (HWW: 0.14 ng/mL; surfaces: 0.28 pg/cm²). Global uncertainty was below 20% for concentrations higher than 25 ng/mL (HWW) and 50 pg/cm² (surfaces); global uncertainty was little affected by the matrix. Therefore, a multi-matrix assessment could be achieved with this method, thus contributing to a holistic quantification of bicalutamide along the cytostatic circuit. Bicalutamide was not detected in any of the grab samples from a Portuguese hospital, but an enlarged sampling is required to conclude about its occurrence and exposure risks.     

Development and validation of a stability-indicating reversed-phase high performance liquid chromatography method for assay of betamethylepoxide and estimation of its related compounds

Betamethylepoxide (16beta-methyl-Delta(1,4)-pregnadiene-9beta-11beta-oxide-17alpha,21-diol-3,20-dione) is a key intermediate for the synthesis of various active pharmaceutical ingredients (APIs) of steroid compounds. A stability-indicating reversed-phase HPLC method for assay of betamethylepoxide and estimation of its related compounds has been developed and validated. This method can accurately quantitate betamethylepoxide in the presence of numerous structurally related compounds (including the alpha-epimer, known as alphamethylepoxide). This method can also adequately separate most of the impurities from each other and estimate their quantities in betamethylepoxide samples. The stability-indicating capability of this method has been demonstrated by adequate separation of the degradation products from betamethylepoxide in stress degraded and aged stability samples. The HPLC column used in the method was a 5 cm YMC Hydrosphere C(18) column (4.6 mm I.D.) and the mobile phase consisted of (A) water and (B) acetonitrile:methanol (8:25, v/v).     

LC Method for Studies on the Stability of Lopinavir and Ritonavir in Soft Gelatin Capsules

This study describes the development and full validation of a stability-indicating HPLC method to quantify ritonavir (RTV) and lopinavir (LPV) in soft gelatin capsules. The method uses a LiChrospher^® 100 RP-18 (250 mm × 4.6 mm, 5 µm, Merck) column and isocratic elution. The mobile phase consisted of a mixture of acetonitrile-water-methanol (53:37:10, v/v/v), pumped at a flow-rate of 1.0 mL min^?1 and UV detection at 210 nm using a photodiode array detector. LPV and RTV were exposed to thermal, photolytic, hydrolytic and oxidative stress conditions, and the stressed samples were analyzed by the proposed method. The response was linear over a range of 40-360 µg mL^?1 for LPV and 10–90 µg mL^?1 for RTV (r > 0,999 for both drugs). The mean recoveries were 99.46 and 100.81% for LPV and RTV, respectively. The RSD values for intra- and inter-day precision studies were < 0.70% for both drugs. Degradation studies showed that lopinavir is stable in thermal, alkaline and oxidative conditions, while ritonavir degraded under these conditions. The method was found to be stability-indicating and can be used for the routine analysis of the association LPV/RTV in soft gelatin capsules.     

Boronate-Containing Copolymer Grafted on Eupergit C as Matrix for Affinity Chromatography: Isotherms and Kinetics Study

A stability-indicating HPLC method has been developed and subsequently validated for the simultaneous determination of domperidone and pantoprazole in commercial tablets. The proposed HPLC method utilizes Phenomenex^® Gemini C₁₈ column (150 mm × 4.6 mm i.d., 5 μm) and mobile phase consisting of methanol-acetonitrile-20 mM dipotassium hydrogen phosphate and phosphoric acid buffer pH 7.0 (20:33:47, v/v/v) at a flow rate of 1.19 mL min^?1. Quantitation was achieved with UV detection at 285 nm based on peak area with linear calibration curves at concentration ranges 0.5–5.0 μg mL^?1 for domperidone and 1.0–10 μg mL^?1 for pantoprazole (R ² > 0.999 for both drugs). The method was validated in terms of accuracy, precision, linearity, limits of detection, limits of quantitation and robustness. This method has been successively applied to pharmaceutical formulation and no interference from the tablet excipients was found. Domperidone, pantoprazole and their combination drug product were exposed to acid, base and neutral hydrolysis, oxidation, dry heat and photolytic stress conditions and the stressed samples were analyzed by the proposed method. As the proposed method could effectively separate the drug from its degradation products, it can be employed as stability-indicating method for the determination of instability of these drugs in bulk and commercial products.     

Sensitive Determination of Water Insoluble Dyes Used as Marking of Commercial Petroleum Products Using High‐Performance Liquid Chromatography with Electrochemical Detection

This paper describes an analytical method using high‐performance liquid chromatographic (HPLC) separation coupled with electrochemical detection to detect three dyes, Solvent Blue 14 (SB‐14), Solvent Blue 35 (SB‐35) and Solvent Red 24 (SR‐24). The dyes were eluted and separated using a reversed‐phase column (C‐8) under isocratic elution with the mobile phase containing a mixture of acetonitrile/ammonium acetate (5.0 mmol L^?1) at the ratio of 75 : 25 (v/v). Two sample pretreatment methods were tested and successfully applied to quantify SB14, SB‐35 and SR‐24 dyes in gasoline samples. The proposed method was simple, fast and suitable to detect and quantify marker dyes in gasoline sample at low concentration.     

Liquid chromatographic method for the determination of calcium cyanamide using pre-column derivatization.

A specific and stability-indicating high-performance liquid chromatographic (HPLC) method has been developed for the analysis of calcium cyanamide in bulk material and dosage form. Calcium cyanamide in samples was converted into dansyl cyanamide. A muBondapak C18 column was employed for HPLC with 0.01 M sodium phosphate (pH 6.3)-acetonitrile (75:25, v/v) as the mobile phase. The proposed HPLC method was validated for linearity, specificity, accuracy and reproducibility.     

Development and validation of an HPLC stability-indicating method for identification and assay of elemental iron(II) in pharmaceutical drug products using reversed-phase HPLC

Ferrous sulfate tablets are a supplementary iron source for people who suffer from iron deficiency anemia. A simple, fast, and QC-friendly HPLC method was developed and validated to determine elemental iron in ferrous sulfate drug products. A TSK-GEL Super octadecylsilyl column (50 x 4.6 mm id, 2 microm particle size) with a mobile phase consisting of 0.06 M methanesulfonic acid in water-acetonitrile (40 + 60, v/v) and UV detection at 282 nm were used for this method. Separation of the elemental iron peak from the matrix was achieved within 5 min. This method was successfully validated according to International Conference on Harmonization guidelines, and shown to be stability-indicating for the shelf-life samples of ferrous sulfate tablets, as well as selective for the analyte of interest.     

Forced degradation studies of norepinephrine and epinephrine from dental anesthetics: Development of stability-indicating HPLC method and in silico toxicity evaluation

Injectable solutions containing epinephrine (EPI) and norepinephrine (NE) are not stable, and their degradation is favored mainly by the oxidation of catechol moiety. As studies of these drugs under forced degradation conditions are scarce, herein, we report the identification of their degradation products (DP) in anesthetic formulations by the development of stability-indicating HPLC method. Finally, the risk assessment of the major degradation products was evaluated using in silico toxicity approach. HPLC method was developed to obtain a higher selectivity allowing adequate elution for both drugs and their DPs. The optimized conditions were developed using a C18 HPLC column, sodium 1-octanesulfonate, and methanol (80:20, v/v) as mobile phase, with a flow rate of 1.5 mL/min, UV detection at 199 nm. The analysis of standard solutions with these modifications resulted in greater retention time for EPI and NE, which allow the separation of these drugs from their respective DPs. Then, five DPs were identified and analyzed by in silico studies. Most of the DPs showed important alerts as hepatotoxicity and mutagenicity. To the best of our acknowledgment, this is the first report of a stability-indicating HPLC method that can be used with formulations containing catecholamines.     

A Rapid Stability-Indicating LC Method for Ziprasidone Hydrochloride

A simple and rapid reversed-phase liquid chromatographic method was developed for the related substances determination and quantitative evaluation of ziprasidone hydrochloride, which is used as an antipsychotic agent. Forced degradation studies were performed on bulk sample of ziprasidone hydrochloride using acid, base, oxidative hydrolysis, thermal stress and photolytic degradation. Mild degradation of the drug substance was observed during thermal stress and considerable degradation observed during base hydrolysis. The chromatographic method was fine tuned using the samples generated from forced degradation studies. Good resolution between the peaks corresponds to synthetic impurities and degradation products from the analyte were achieved on YMC Pack Pro C18 column using the mobile phase consists of a mixture of 0.05% v/v of phosphoric acid in water and acetonitrile. The stressed test solutions were assayed against the qualified working standard of ziprasidone hydrochloride and the mass balance in each case was close to 99.7% indicating that the developed method was stability-indicating. Validation of the developed method was carried out as per ICH requirements.