Study on one-step catalytic amination of oleyl alcohol to unsaturated tertiary amine

The synthesis of unsaturated tertiary amine by the amination of oleyl alcohol and dimethylamine under atmospheric pressure over Cu–Ni catalysts supported on CaCO₃ was studied. The yield of tertiary amine and the retention rate of the unsaturated bond can reach 95.4 and 93.3 %, respectively. The yields of tertiary amine over different Cu/Ni ratios catalysts were close to each other, which meant that Cu/Ni ratios had no obvious influence on the production of tertiary amine, while the retention rate of the unsaturated bond over the catalyst containing only Cu was higher than the catalysts containing Cu–Ni. The major effect of the Cu element was dehydrogenation, and the ability of the hydrogenation was weak. The ability of the Ni element to break the carbon–carbon bonds and hydrogenation was strong. Therefore, the performance of the Cu catalyst was better than the conventional Cu–Ni-based catalyst for the retention of the unsaturated bond in long-chain R of the tertiary amine.     

Synthesis of H-pyrazolo[5,1-a]isoquinolines via copper(II)-catalyzed oxidation of an aliphatic C-H bond of tertiary amine in air

A multicomponent reaction of 2-alkynylbenzaldehyde, sulfonohydrazide, and tertiary amine is discovered, which generates the unexpected H-pyrazolo[5,1-a]isoquinolines in good yields under mild conditions. In the reaction process, silver(I)-catalyzed intramolecular cyclization and copper(II)-catalyzed oxidation of an aliphatic C-H bond of tertiary amine in air are involved.     

Reaction of tertiary allylic amines with butadiene catalyzed by palladium

Tertiary allylic amines react with butadiene in the presence of palladium(O) with cleavage of the carbon-nitrogen bond of the allylic amine and formation of the unsaturated tertiary amine $\text{4}$.     

A green and convenient protocol for the synthesis of diarylmethanes via a one-pot,three-component reaction catalyzed by a novel silica tungstic acid (STA) under solvent-free conditions

A cost-effective and eco-friendly synthesis of diarylmethanes derivatives has been developed through the Mannich type Friedel–Crafts addition reaction of tertiary aromatic amine formaldehydes with β-naphthol/indole using silica-supported tungstic acid (STA) as a recyclable heterogeneous acid catalyst in solvent-free condition. Here, we proposed two schemes using the same catalyst. The effects of different solvents have been studied and a comparison of silica-supported tungstic acid with different acid catalysts has also been made.     

Acyl iodides in organic synthesis: XI. Unusual N-C bond cleavage in tertiary amines

Acyl iodides reacted with excess primary and secondary amines in a way similar to acyl chlorides, yielding the corresponding carboxylic acid amide and initial amine hydroiodide. Reactions of tertiary amines with acyl iodides were accompanied by cleavage of the N-C bond with formation of the corresponding N,N-di(hydrocarbyl)carboxamide and alkyl iodide. In the presence of excess tertiary amine the latter was converted into quaternary tetra(hydrocarbyl)ammonium iodide.     

Reduction of indolo[2,3-a]quinolizidines with baker's yeast

The reduction of several indolo[2,3-a]quinolizidines with Baker's yeast (Saccharomyces cerevisiae) affords novel reduction products resulting from reduction of the indole double bond, cleavage of the C-D ring junction, or reduction of a lactam to a carbinol amine, as determined by high resolution mass spectrometry.     

Phase structure and thermomechanical properties of primary and tertiary amine‐cured epoxy/silica hybrids

Several kinds of organic–inorganic hybrids were synthesized from an epoxy resin and a silane alkoxide with a primary amine‐type curing agent or tertiary amine curing catalyst. In the hybrid systems cured with the primary amine‐type curing agent, the storage modulus in the high‐temperature region increased, and the peak area of the tan δ curve decreased. Moreover, the mechanical properties were improved by the hybridization of small amounts of the silica network. However, these phenomena were not observed in the hybrid systems cured with the tertiary amine catalyst. The differences in the network structures of the hybrid materials with the different curing processes were characterized with Fourier transform infrared (FTIR). In the hybrid systems cured with the primary amine‐type curing agent, FTIR results showed the formation of a covalent bond between silanol and hydroxyl groups that were generated by the reaction of an epoxy group with an active hydrogen of the primary amine. However, this phenomenon was not observed in the hybrids cured with the tertiary amine. The hybrids with the primary amine showed a homogeneous microstructure in transmission electron microscopy observations, although the hybrids cured with the tertiary amine showed a heterogeneous structure. These results mean that the differences in the interactions between the organic and inorganic phases significantly affect the properties and microstructures of the resultant composites. © 2001 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 39: 1071–1084, 2001     

Oxidations of N-(3-indoleethyl) cyclic aliphatic amines by horseradish peroxidase: the indole ring binds to the enzyme and mediates electron-transfer amine oxidation

Although oxidations of aromatic amines by horseradish peroxidase (HRP) are well-known, typical aliphatic amines are not substrates of HRP. In this study, the reactions of N-benzyl and N-methyl cyclic amines with HRP were found to be slow, but reactions of N-(3-indoleethyl) cyclic amines were 2-3 orders of magnitude faster. Analyses of pH-rate profiles revealed a dominant contribution to reaction by the amine-free base forms, the only species found to bind to the enzyme. A metabolic study on a family of congeneric N-(3-indoleethyl) cyclic amines indicated competition between amine and indole oxidation pathways. Amine oxidation dominated for the seven- and eight-membered azacycles, where ring size supports the change in hybridization from sp3 to sp2 that occurs upon one-electron amine nitrogen oxidation, whereas only indole oxidation was observed for the six-membered ring congener. Optical difference spectroscopic binding data and computational docking simulations suggest that all the arylalkylamine substrates bind to the enzyme through their aromatic termini with similar binding modes and binding affinities. Kinetic saturation was observed for a particularly soluble substrate, consistent with an obligatory role of an enzyme-substrate complexation preceding electron transfer. The significant rate enhancements seen for the indoleethylamine substrates suggest the ability of the bound indole ring to mediate what amounts to medium long-range electron-transfer oxidation of the tertiary amine center by the HRP oxidants. This is the first systematic investigation to document aliphatic amine oxidation by HRP at rates consistent with normal metabolic turnover, and the demonstration that this is facilitated by an auxiliary electron-rich aromatic ring.     

Model reactions for crosslinking polydiacetylene materials

A series of reactions are presented which allowed us to crosslink polydiacetylenes containing carbamate groups in the side chain without attacking the triple bond. These reactions involved syntheses of carbamates and allophanates from butyl alcohol and phenyl isocyanate with metal and tertiary amine catalysts using a model compound, 2,4,7,9-tetramethyl-5-decyn-4,7-diol. Elemental analysis, IR and UV spectroscopy, and high performance liquid chromatography (HPLC) were used as analytical tools. Metal catalysts were found to favor the formation of allophanates in higher yields and purity as compared to tertiary amine catalysts.     

Iron-catalyzed synthesis of glycine derivatives via carbon-nitrogen bond cleavage using diazoacetate

Treatment of tertiary amines with diazoacetate in the presence of a catalytic amount of an iron salt, FeCl(3), in ethanol gave glycine derivatives. In this reaction, a carbon-nitrogen single bond of the amine was cleaved.     

Atropisomerism about a heptafluoroisopropyl to aryl bond in 5-amino-4-heptafluoroisopropyl indazole

The atropisomerism about a heptafluoroisopropyl to aryl bond in 5-amino-4-heptafluoroisopropyl indazole is reported. The through-space hydrogen fluorine coupling of the indazole H-3 proton with the tertiary F atom is shown to be useful to distinguish the two rotamers. The same atropisomerism is also observed in the analogous indole, benzofuran, and naphthaline derivatives.     

Direct Cyclization of Tertiary Aryl Amines with Iodonium Ylides

Described herein is a direct cyclization of simple tertiary aryl amines with iodonium ylides leading to a broad range of N‐heterocycles. Completely different from the known reactivity of iodonium ylides, the finding reported herein is that an iodonium ylide is capable of cleaving a C(sp³)−H bond and accepting two hydrogen atoms of a tertiary aryl amine, thus inducing a novel cyclization process. This transformation can proceed without the assistance of a transition‐metal catalyst and eliminates the need for the premodification of the amine or the use of an additional initiator/oxidant.     

STRUCTURAL EFFECT ON VINYL POLYMERIZATION INITIATED WITH AROMATIC TERTIARY AMINE

The polymerization mechanism of various vinyl monomers in the presence of aromatic tertiary amines has been studied. It was found that the mechanisms of different monomers are varied with the structures of monomers. Those monomers, such as methacrylic esters containing α-CH_3 group on the double bond could be polymerized with aromatic tertiary amine in the absence of light, while the monomers without α-CH_3 group, such as methyl acrylate, acrylonitrile etc. would polymerize only under light.The structural effects, both of the monomer and the amine, on the rate of photopolymerization were studied. The activities of monomers and amines may be arranged in the following orderMonomer: AN>MA>VA>St Amine: DMT>DMA>DMB>DNAIt is revealed that both the electro-negative group on the double bond of monomer which acts as an acceptor and the electro-positive group on the nitrogen atom of amine which acts as a donor would effectively increase the rate of photopolymerization.     

Facile Synthesis of 2,3,6,11-Tetrahydro-1H,5H-indolizino[8,7-b]indole-11b-Carboxylic Acid Methyl Ester via a 9-BBN-Mediated Tertiary Lactam Reduction

A facile synthesis of 2,3,6,11-tetrahydro-1H,5H-indolizino[8,7-b]indole-11b-carboxylic acid methyl ester, a versatile intermediate utilized in the synthesis of indole alkaloids, was achieved in two steps. Condensation of tryptamine with dimethyl α-ketoglutarate led to the formation of the corresponding indolizino[8,7-b]indolone ester, which subsequently underwent an efficient lactam reduction with 9-BBN to generate the tertiary amine ester in good yield.     

Solvation largely accounts for the effect of N-alkylation on the properties of nickel(II/I) and chromium(III/II) cyclam complexes

The source of the effect of N-alkylation on the redox properties of Ni(II/I) and Cr(III/II) cyclam complexes has been investigated using DFT calculations. The structures of the anhydrous and hydrated complexes were optimized in the gas phase, and single point calculations were performed in a polarized continuum. The main results are the following: the decrease in outer sphere solvation upon N-alkylation is the major source of the relative stabilization of the lower oxidation state complexes by the tertiary amine ligands; tertiary amine nitrogen donors are stronger sigma-donors than the secondary amines, as predicted from the inductive effect of alkyls; steric strain elongates the metal-nitrogen bonds in the tertiary complexes and decreases the ligand strain energies; and the site of water binding to the complexes differs because of their different electronic structures (i.e., in the Ni complexes, the water molecules bind to the M[bond]N[bond]H sites, whereas in the Cr complexes they bind to the central metal cation). Outer sphere hydrogen bonding of water to the ligands in the coordination sphere lowers the ionization potentials by charge delocalization.     

Biomimetic approach to perophoramidine and communesin via an intramolecular cyclopropanation reaction

[reaction: see text] Starting from tryptamine 4 and isatin 5, a biomimetic approach to the pentacyclic substructure 1 of perophoramidine and communesin was developed. The key steps were to create a stable three/six bicyclic system 2 on the 2,3-double bond of an indole derivative 3 by an intramolecular cyclopropanation, followed by ring opening of the resulting cyclopropane ring with the in situ generated amine group of an aniline.     

聚酰胺-胺的酸碱电位滴定分析

聚酰胺-胺(PAMAM)是一种有着广泛用途的树形大分子,酸碱滴定分析可以表征合成的PAMAM中所含的伯胺基及叔胺基的数量,因此作为一种重要的辅助表征手段被PAMAM的合成及改性研究者所采用。文章对该方法原理进行了详细的论述,说明了滴定过程中产生的酰胺键水解不影响滴定及计算结果。通过实验表明在pH<2的条件下滴定可以保证叔胺的充分质子化。     

Kinetics of the addition of electrophilic vinyl reagents on protonated tertiary amines supported by a polymeric chain

Starting from the mechanism of the addition of vinyl methyl ketone to protonated tertiary polyamine, we examined the kinetics of addition of acrylic acid, acrylamide and methyl acrylate to P4VP in the presence of HBr. The reactivities depend on the electrophilic character of the double bond; the kinetics of addition of vinyl methyl ketone to poly(2-methyl-5-vinylpyridine), poly(2-vinylpyridine), poly(2-vinylquinoline) and poly(dimethylaminostyrene) in the presence of HBr depend essentially on the steric hindrance of the tertiary amine.     

Iron catalyzed CO2 hydrogenation to formate enhanced by Lewis acid co-catalysts

A family of iron(ii) carbonyl hydride complexes supported by either a bifunctional PNP ligand containing a secondary amine, or a PNP ligand with a tertiary amine that prevents metal–ligand cooperativity, were found to promote the catalytic hydrogenation of CO₂ to formate in the presence of Brønsted base. In both cases a remarkable enhancement in catalytic activity was observed upon the addition of Lewis acid (LA) co-catalysts. For the secondary amine supported system, turnover numbers of approximately 9000 for formate production were achieved, while for catalysts supported by the tertiary amine ligand, nearly 60 000 turnovers were observed; the highest activity reported for an earth abundant catalyst to date. The LA co-catalysts raise the turnover number by more than an order of magnitude in each case. In the secondary amine system, mechanistic investigations implicated the LA in disrupting an intramolecular hydrogen bond between the PNP ligand N–H moiety and the carbonyl oxygen of a formate ligand in the catalytic resting state. This destabilization of the iron-bound formate accelerates product extrusion, the rate-limiting step in catalysis. In systems supported by ligands with the tertiary amine, it was demonstrated that the LA enhancement originates from cation assisted substitution of formate for dihydrogen during the slow step in catalysis.