Density functional study of the O2 binding to [CuI(TPAR)]+ (TPA = tris(2-pyridylmethyl)amine) in THF and EtCN

Density functional theory using the B3LYP hybrid functional has been employed to study the formation of [Cu(II)(TPA(H))(O2-)]+ and [Cu(II)(TPA(MeO))(O2-)]+ (TPA = tris(2-pyridylmethyl)amine) in two different solvents, THF and EtCN. The thermodynamics of solvent coordination as well as that of the overall reactions with O2 has been computed. The formations of [Cu(II)(TPA(H))(O2-)]+ in THF and of [Cu(II)(TPA(MeO))(O2-)]+ in both THF and EtCN are found to be initiated from the [Cu(I)(TPA(R))]+ species, that is, the Cu complex possessing an empty coordination site. In contrast, the formation of [Cu(II)(TPA(H))(O2-)]+ in EtCN is found to be initiated from the [Cu(I)(TPA(H))(EtCN)]+ species, that is, one solvent molecule being coordinated to Cu(I). In general, good agreement is found between theoretical and experimental results. The high accuracy of the B3LYP functional in reproducing experimental thermodynamic data for the present type of transition metal complexes is demonstrated by the fact that the differences between measured and computed thermodynamic parameters (DeltaG degree, DeltaH degrees , and -TDeltaS degree, in most cases are less than 2.0 kcal mol(-1). An attempt was made to investigate the kinetics of the formation of [Cu(II)(TPA(H))(O2-)]+ in THF and EtCN. Computed free energies of activation, DeltaG, are in good agreement with experimental results. However, an analysis of the partitioning of the free energy barriers in enthalpic and entropic contributions indicates that the computationally studied reaction pathway might differ from the one observed experimentally.     

Tripodal bis(imidazole) thioether copper(I) complexes: mimics of the Cu(M) site of copper hydroxylase enzymes

Tripodal bis(imidazole) thioether ligands, (N-methyl-4,5-diphenyl-2-imidazolyl)2C(OR)C(CH3)2SR' (BIT(OR,SR'); R = H, CH3; R' = CH3, C(CH3)3, C(C6H5)3), have been prepared, offering the same N2S donor atom set as the CuM binding site of the hydroxylase enzymes, dopamine beta hydroxylase and peptidylglycine hydroxylating monooxygenase. Isolable copper(I) complexes of the type [(BIT(OR,SMe))Cu(CO)]PF6 (3a and 3b) are produced in reactions of the respective tripodal ligands 1a (R = H) and 1b (R = Me) with [Cu(CH3CN)4]PF6 in CH2Cl2 under CO (1 atm); the pyramidal structure of 3a has been determined crystallographically. The infrared (IR) nu(CO)'s of 3a and 3b (L = CO) are comparable to those of the Cu(M)-carbonylated enzymes, indicating similar electronic character at the copper centers. The reaction of [(BIT(OH,SMe))Cu(CH3CN)]PF6 (2a) with dioxygen produces [(BIT(O,SOMe))2Cu2(DMF)2](PF6)2 (4), whose X-ray structure revealed the presence of bridging BIT-alkoxo ligands and terminal -SOMe groups. In contrast, oxygenation of 2b (R = Me) affords crystallographically defined [(BIT(OMe,SMe))2Cu2(mu-OH)2](OTf)2 (5), in which the copper centers are oxygenated without accompanying sulfur oxidation. Complex 5 in DMF is transformed into five-coordinate, mononuclear [CuII(BIT(OMe,SMe))(DMF)2](PF6)2 (6). The sterically hindered BIT(OR,SR') ligands 9 and 10 (R' = t-Bu; R = H, Me) and 11 and 12 (R' = CPh3; R = H, Me) were also prepared and examined for copper coordination/oxygenation. Oxygenation of copper(I) complex 13b derived from the BIT(OMe,SBu-t) ligand is slow, relative to 2b, producing a mixture of (BIT(OMe,SBu-t))2Cu2(mu-OH)2-type complexes 14b and 15b in which the -SBu-t group is uncoordinated; one of these complexes (15b) has been ortho-oxygenated on a neighboring aryl group according to the X-ray analysis and characterization of the free ligand. Oxygenation of the copper(I) complex derived from BIT(OMe,SCPh3) ligand 12 produces a novel dinuclear disulfide complex, [(BIT(OMe,S)2Cu2(mu-OH)2](PF6)2 (17), which is structurally characterized. Reactivity studies under anaerobic conditions in the presence of t-BuNC indicate that 17 is the result of copper(I)-induced detritylation followed by oxygenation of a highly reactive copper(I)-thiolate complex.     

Structural variability in Ag(I) and Cu(I) coordination polymers with thioether-functionalized bis(pyrazolyl)methane ligands

We present here two ligand classes based on a bis(pyrazolyl)methane scaffold functionalized with a rigid (-Ph-S-Ph) or flexible (-CH(2)-S-Ph) thioether function: L(R)PhS (R = H, Me) and L(R)CH(2)S (R = H, Me, iPr). The X-ray molecular structures of Ag(I) and Cu(I) binary complexes with L(R)PhS or L(R)CH(2)S using different types of counterions (BF(4)(-), PF(6)(-), and CF(3)SO(3)(-)) are reported. In these complexes, the ligands are N(2) bound on a metal center and bridge on a second metal with the thioether group. In contrast, when using triphenylphosphine (PPh(3)) as an ancillary ligand, mononuclear ternary complexes [M(L)PPh(3)](+) (M = Cu(I), Ag(I); L = L(R)PhS, L(R)CH(2)S) are formed. In these complexes, the more flexible ligand type, L(R)CH(2)S, is able to provide the N(2)S chelation, whereas the more rigid L(R)PhS ligand class is capable of chelating only N(2) because the thioether function preorganized, as it did in the coordination polymers, to point away from the metal center. Rigid potential-energy surface scans were performed by means of density functional theory (DFT) calculations (B3LYP/6-31+G) on the two representative ligands, L(H)PhS and L(H)CH(2)S. The surface scans proved that the thioether function is preferably oriented on the opposite side of the bispyrazole N(2) chelate system. These results confirm that both ligand classes are suitable components for the construction of coordination polymers. Nevertheless, the methylene group that acts as a spacer in L(H)CH(2)S imparts an inherent flexibility to this ligand class so that the conformation responsible for the N(2)S chelation is energetically accessible.     

Proton transfer to nickel-thiolate complexes. 2. Rate-limiting intramolecular proton transfer in the reactions of [Ni(SC(6)H(4)R-4)(PhP[CH(2)CH(2)PPh(2)](2))](+) (R = NO(2), Cl, H, Me, or MeO)

The protonation of [Ni(SC(6)H(4)R-4)(triphos)](+) (triphos = PhP[CH(2)CH(2)PPh(2)](2); R = NO(2), Cl, H, Me, or MeO) by [lutH](+) (lut = 2,6-dimethylpyridine) to form [Ni(S(H)C(6)H(4)R-4)(triphos)](2+) is an equilibrium reaction in MeCN. Kinetic studies, using stopped-flow spectrophotometry, reveal that the reactions occur by a two-step mechanism. Initially, [lutH](+) rapidly binds to the complex (K(2)(R)) in an interaction which probably involves hydrogen-bonding of the acid to the sulfur. Subsequent intramolecular proton transfer from [lutH](+) to sulfur (k(3)(R)) is slow because of both electronic and steric factors. The X-ray crystal structures of [Ni(SC(6)H(4)R-4)(triphos)](+) (R = NO(2), H, Me, or MeO) show that all are best described as square-planar complexes, with the phenyl substituents of the triphos ligand presenting an appreciable barrier to the approach of the sterically demanding [lutH](+) to the sulfur. The kinetic characteristics of the intramolecular proton transfer from [lutH](+) to sulfur have been investigated. The rate of intramolecular proton transfer exhibits a nonlinear dependence on Hammett sigma(+), with both electron-releasing and electron-withdrawing 4-R-substituents on the coordinated thiolate facilitating the rate of proton transfer (NO(2) > Cl > H > Me < MeO). The rate constants for intramolecular proton transfer correlate well with the calculated electron density of the sulfur. The temperature dependence of the rate of the intramolecular proton transfer reactions shows that deltaH() is small but increases as the 4-R-substituent becomes more electron-withdrawing [deltaH = 4.1 (MeO), 6.9 (Me), 11.4 kcal mol(-)(1) (NO(2))], while DeltaS() becomes progressively less negative [deltaS = -50.1 (MeO), -41.2 (Me), -16.4 (NO(2)) cal K(-)(1) mol(-)(1)]. Studies with [lutD](+) show that the rate of intramolecular proton transfer varies with the 4-R-substituent [(k(3)(NO)2)(H)/(k(3)(NO)2)(D) = 0.39; (k(3)(Cl))(H)/(k(3)(Cl))(D) = 0.88; (k(3)(Me))(H)/(k(3)(Me))(D) = 1.3; (k(3)(MeO))(H)/(k(3)(MeO))(D) = 1.2].     

Binuclear copper(II) oxidation products from copper(I) complexes with tridentate ligands. Magnetostructural characterization

The bis-pyridine tridentate ligands (6-R-2-pyridylmethyl)-(2-pyridylmethyl) benzylamine (RDPMA, where R = CH(3), CF(3)), (6-R-2-pyridylmethyl)-(2-pyridylethyl) benzylamine (RPMPEA, where R = CH(3), CF(3)), and the bidentate ligand di-benzyl-(6-methyl-2-pyridylmethyl)amine (BiBzMePMA) have been synthesized and their copper(I) complexes oxidized in a methanol solution to afford self-assembled bis-micro-methoxo-binuclear copper(II) complexes (1, 2, 4, 6) or hydroxo- binuclear copper(II) complexes (3). Oxidation of the nonsubstituted DPMA (R = H) in dichloromethane gives a chloride-bridged complex (5). The crystal structures for [Cu(MeDPMA)(MeO)](2)(ClO(4))(2) (1), [Cu(RPMPEA)(MeO)](2)(ClO(4))(2) (for 2, R= Me, and for 4, R = CF(3)), [Cu(BiBzMePMA)(MeO)](2)(ClO(4))(2) (6), [Cu(FDPMA)(OH)](2)(ClO(4))(2) (3), and [Cu(DPMA)(Cl)](2)(ClO(4))(2) (5) have been determined, and their variable-temperature magnetic susceptibility has been measured in the temperature range of 10-300 K. The copper coordination geometries are best described as square pyramidal, except for 6, which is square planar, because of the lack of one pyridine ring in the bidentate ligand. In 1-4 and 6, the basal plane is formed by two pyridine N atoms and two O atoms from the bridging methoxo or hydroxo groups, whereas in 5, the bridging Cl atoms occupy axial-equatorial sites. Magnetic susceptibility measurements show that the Cu atoms are strongly coupled antiferromagnetically in the bis-methoxo complexes 1, 2, 4, and 6, with -2J > 600 cm(-)(1), whereas for the hydroxo complex 3, -2J = 195 cm(-)(1) and the chloride-bridged complex 5 shows a weak ferromagnetic coupling, with 2J = 21 cm(-)(1) (2J is an indicator of the magnetic interaction between the Cu centers).     

Resonance raman investigation of equatorial ligand donor effects on the Cu(2)O(2)(2+) core in end-on and side-on mu-peroxo-dicopper(II) and bis-mu-oxo-dicopper(III) complexes

The effect of endogenous donor strength on Cu(2)O(2) bonds was studied by electronically perturbing [[(R-TMPA)Cu(II)]](2)(O(2))](2+) and [[(R-MePY2)Cu](2)(O(2))](2+) (R = H, MeO, Me(2)N), which form the end-on mu-1,2 bound peroxide and an equilibrium mixture of side-on peroxo-dicopper(II) and bis-mu-oxo-dicopper(III) isomers, respectively. For [[(R-TMPA)Cu(II)](2)(O(2))](2+), nu(O-O) shifts from 827 to 822 to 812 cm(-1) and nu(Cu)(-)(O(sym)) shifts from 561 to 557 to 551 cm(-1), respectively, as R- varies from H to MeO to Me(2)N. Thus, increasing the N-donor strength to the copper decreases peroxide pi(sigma) donation to the copper, weakening the Cu-O and O-O bonds. A decrease in nu(Cu-O) of the bis-mu-oxo-dicopper(III) complex was also observed with increasing N-donor strength for the R-MePY2 ligand system. However, no change was observed for nu(O-O) of the side-on peroxo. This is attributed to a reduced charge donation from the peroxide pi(sigma) orbital with increased N-donor strength, which increases the negative charge on the peroxide and adversely affects the back-bonding from the Cu to the peroxide sigma orbital. However, an increase in the bis-mu-oxo-dicopper(III) isomer relative to side-on peroxo-dicopper(II) species is observed for R-MePY2 with R = H < MeO < Me(2)N. This effect is attributed to the thermodynamic stabilization of the bis-mu-oxo-dicopper(III) isomer relative to the side-on peroxo-dicopper(II) isomer by strong donor ligands. Thus, the side-on peroxo-dicopper(II)/bis-mu-oxo-dicopper(III) equilibrium can be controlled by electronic as well as steric effects.     

Kinetics of the reactions between [S(2)MoS(2)Cu(SC(6)H(4)R-4)](2-)(R = MeO, H, Cl or NO(2)) and CN(-): substitution mechanism at a 3-coordinate Cu(I) site

The kinetics of the reaction between [S(2)MoS(2)Cu(SC(6)H(4)R-4)](2-)(R = MeO, H, Cl or NO(2)) and CN(-) to form [S(2)MoS(2)CuCN](2-) have been studied in MeCN using stopped-flow spectrophotometry. In all cases, the rate law is of the form, Rate ={k+k(2)(R)[CN(-)]}[S(2)MoS(2)Cu(SC(6)H(4)R-4)(2-)]. It is proposed that both k and k correspond to associative substitution mechanisms. The k pathway involves attack by CN(-) at the copper site followed by dissociation of the thiolate. The k pathway involves attack of the solvent (MeCN) at the copper site, followed by dissociation of the thiolate to form [S(2)MoS(2)Cu(NCMe)](-). Subsequent rapid substitution of the coordinated solvent by cyanide produces [S(2)MoS(2)CuCN](2-). The evidence that both the k and k pathways involve associative mechanisms are: (i) the 4-R-substituent on the thiolate ligand has a similar effect on both k and k, with electron-withdrawing 4-R-substituents facilitating substitution; (ii) both the k and k pathways are associated with similar activation parameters (for k(1)(H): DeltaH++ = 5.5 +/- 0.5 kcal mol(-1), DeltaS++ = -23.9 +/- 2.0 cal deg(-1) mol(-1); for k(2)(H): DeltaH++ = 2.3 +/- 0.5 kcal mol(-1), DeltaS++ = - 23.9 +/- 2.0 cal deg(-1) mol(-1)) and (iii) addition of C(6)H(5)S(-) results in a similar increase in both k and k.     

Monoanionic {Mn(NO)}5 and dianionic {Mn(NO)}6 thiolatonitrosylmanganese complexes: [(NO)Mn(L)2]- and [(NO)Mn(L)2]2- (LH2 = 1,2-benzenedithiol and toluene-3,4-dithiol)

The reaction of MnBr(2) and [PPN](2)[S,S-C(6)H(3)-R] (1:2 molar ratio) in THF yielded [(THF)Mn(S,S-C(6)H(3)-R)(2)](-) [R = H (1a), Me (1b); THF = tetrahydrofuran]. Formation of the dimeric [Mn(S,S-C(6)H(3)-R)(2)](2)(2-) [R = H (2a), Me (2b)] was presumed to compensate for the electron-deficient Mn(III) core via two thiolate bridges upon dissolution of complexes 1a and 1b in CH(2)Cl(2). Complex 2a displays antiferromagnetic coupling interaction between two Mn(III) centers (J = -52 cm(-1)), with the effective magnetic moment (mu(eff)) increasing from 0.85 mu(B) at 2.0 K to 4.86 mu(B) at 300 K. The dianionic manganese(II) thiolate complexes [Mn(S,S-C(6)H(3)-R)(2)](2-) [R = H (3a), Me (3b)] were isolated upon the addition of [BH(4)](-) into complexes 1a and 1b or complexes 2a and 2b, respectively. The anionic mononuclear {Mn(NO)}(5) thiolatonitrosylmanganese complexes [(NO)Mn(S,S-C(6)H(3)-R)(2)](-) [R = H (4a), Me (4b)] were obtained from the reaction of NO(g) with the anionic complexes 1a and 1b, respectively, and the subsequent reduction of complexes 4a and 4b yielded the mononuclear {Mn(NO)}(6) [(NO)Mn(S,S-C(6)H(3)-R)(2)](2-) [R = H (5a), Me (5b)]. X-ray structural data, magnetic susceptibility measurement, and magnetic fitting results imply that the electronic structure of complex 4a is best described as a resonance hybrid of [(L)(L)Mn(III)(NO(*))](-) and [(L)(L(*))Mn(III)(NO(-))](-) (L = 1,2-benzenedithiolate) electronic arrangements in a square-pyramidal ligand field. The lower IR v(NO) stretching frequency of complex 5a, compared to that of complex 4a (shifting from 1729 cm(-1) in 4a to 1651 cm(-1) in 5a), supports that one-electron reduction occurs in the {(L)(L(*))Mn(III)} core upon reduction of complex 4a.     

Heterobimetallic activation of dioxygen: characterization and reactivity of novel Cu(I)-Ge(II) complexes

Reaction of the known germylene Ge[N(SiMe3)2]2 and a new heterocyclic variant Ge[(NMes)2(CH)2] with [L(Me2)Cu]2 (L(Me2) = the beta-diketiminate derived from 2-(2,6-dimethylphenyl)amino-4-(2,6-dimethylphenyl)imino-2-pentene) yielded novel Cu(I)-Ge(II) complexes L(Me2)Cu-Ge[(NMes)2(CH)2] (1a) and L(Me2)Cu-Ge[N(SiMe3)2]2 (1b), which were characterized by spectroscopy and X-ray crystallography. The lability of the Cu(I)-Ge(II) bond in 1a and b was probed by studies of their reactivity with benzil, PPh3, and a N-heterocyclic carbene (NHC). Notably, both complexes are cleaved rapidly by PPh3 and the NHC to yield stable Cu(I) adducts (characterized by X-ray diffraction) and the free germylene. In addition, the complexes are highly reactive with O2 and exhibit chemistry which depends on the bound germylene. Thus, oxygenation of 1a results in scission and formation of thermally unstable L(Me2)CuO2, which subsequently decays to [(L(Me2)Cu)2(mu-O)2], while 1b yields L(Me2)Cu(mu-O)2Ge[N(SiMe3)2]2, a novel heterobimetallic intermediate having a [Cu(III)(mu-O)2Ge(IV)]3+ core. The isolation of the latter species by direct oxygenation of a Cu(I)-Ge(II) precursor represents a new route to heterobimetallic oxidants comprising copper.     

Dioxygen activation of a trinuclear Cu(I)Cu(I)Cu(I) cluster capable of mediating facile oxidation of organic substrates: competition between O-atom transfer and abortive intercomplex reduction

The dioxygen activation of a series of Cu(I)Cu(I)Cu(I) complexes based on the ligands (L) 3,3'-(1,4-diazepane- 1,4-diyl)bis(1-{[2-(dimethylamino)ethyl](methyl)amino}propan-2-ol)(7-Me) or 3,3'-(1,4-diazepane-1,4-diyl)bis(1-{[2-(diethylamino)ethyl](ethyl)amino}propan-2-ol)(7-Et) forms an intermediate capable of mediating facile O-atom transfer to simple organic substrates at room temperature. To elucidate the dioxygen chemistry, we have examined the reactions of 7-Me, 7-Et, and 3,3'-(1,4-diazepane-1,4-diyl)bis[1-(4-methylpiperazin-1-yl)propan-2-ol] (7-N-Meppz) with dioxygen at -80, -55, and -35?°C in propionitrile (EtCN) by UV-visible, 77?K EPR, and X-ray absorption spectroscopy, and 7-N-Meppz and 7-Me with dioxygen at room temperature in acetonitrile (MeCN) by diode array spectrophotometry. At both -80 and -55?°C, the mixing of the starting [Cu(I)Cu(I)Cu(I)(L)](1+) complex (1) with O(2)-saturated propionitrile (EtCN) led to a bright green solution consisting of two paramagnetic species: the green dioxygen adduct [Cu(II)Cu(II)(μ-η(2):η(2)-peroxo)Cu(II)(L)](2+) (2) and the blue [Cu(II)Cu(II)(μ-O)Cu(II)(L)](2+) species (3). These observations are consistent with the initial formation of [Cu(II)Cu(II)(μ-O)(2)Cu(III)(L)](1+)(4), followed by rapid abortion of this highly reactive species by intercluster electron transfer from a second molecule of complex 1 to give the blue species 3 and subsequent oxygenation of the partially oxidized [Cu(II)Cu(I)Cu(I)(L)](2+)(5) to form the green dioxygen adduct 2. Assignment of 2 to [Cu(II)Cu(II)(μ-η(2):η(2)-peroxo)Cu(II)(L)](2+) is consistent with its reactivity with water to give H(2)O(2) and the blue species 3, as well as its propensity to be photoreduced in the X-ray beam during X-ray absorption experiments at room temperature. In light of these observations, the development of an oxidation catalyst based on the tricopper system requires consideration of the following design criteria: 1)?rapid dioxygen chemistry; 2)?facile O-atom transfer from the activated cluster to substrate; and 3)?a suitable reductant to rapidly regenerate complex 1 to accomplish efficient catalytic turnover.     

Charge-transfer spectra of structurally characterized mixed-valence thiolate-bridged Cu(I)/Cu(II) cluster complexes

A series of Cu(II) and Cu(I)/Cu(II) complexes containing the cis-N(amine)(2)S(thiolate)(2) copper complex rac-2 has been synthesized to provide a basis for understanding the charge-transfer spectra of mixed-valence thiolate-bridged Cu(I)/Cu(II) complexes. In combination with Cu(Me(2)-13-N(4)ane), rac-2 yields a monobridged dinuclear homovalent adduct, rac-5, while reaction with CuCl yields the mixed-valance pentanuclear complex rac-6. In the presence of Cu(II)(acac)(2), chiral R,R-1 reacts to form a mixed-valence pentanuclear cation R,R-7. rac-6 exhibits a relatively short Cu(I). Cu(II) contact [2.8231(9) A] and associated structural features that suggest the presence of a weak Cu(I).Cu(II) interaction in a valence-trapped system. Additional structural features in rac-6 and R,R-7 include singly and doubly bridging thiolates, three- and four-coordinated Cu(I) ions, and varying Cu(I) ligand sets. These features extend the types and complexities of electronic absorptions significantly. Spectra of rac-6 and R,R-7 exhibit multiple overlapping absorptions over the entire visible and ultraviolet spectral regions studied, consonant with these observations. Trends resulting from variations in structure type and oxidation state permit a first approach toward developing a detailed assignment of the individual ligand Rydberg, LF, LMCT, MLCT, and possible MMCT absorptions in these complexes.     

Polynuclear and mixed-ligand mononuclear Cu(I) complexes with N-thiophosphorylated thioureas and 1,10-phenanthroline or PPh3

Deprotonation of the N-thiophosphorylated thioureas RC(S)NHP(S)(OiPr)(2) (R = Me(2)N, HL(I); iPrNH, HL(II); 2,6-Me(2)C(6)H(3)NH, HL(III), 2,4,6-Me(3)C(6)H(2)NH, HL(IV), aza-15-crown-5, HL(V)) and reaction with CuI or Cu(NO(3))(2) in aqueous EtOH leads to the polynuclear complexes [Cu(4)(L(I)-S,S')(4)], [Cu(8)(L(II)-S,S')(8)], and [Cu(3)(L(III-V)-S,S')(3)]. The structures of these compounds were investigated by IR, (1)H, (31)P{(1)H} NMR, UV-vis spectroscopy and elemental analyses. The crystal structures of [Cu(4)L(I)(4)], [Cu(8)L(II)(8)], [Cu(3)L(III,IV)(3)] were determined by single-crystal X-ray diffraction. Reaction of the deprotonated ligands (L(I-V))(-) with a mixture of CuI and 1,10-phenanthroline (phen) or PPh(3) leads to the mixed-ligand mononuclear complexes [Cu(phen)L(I-V)], [Cu(PPh(3))L(I-V)] or [Cu(PPh(3))(2)L(I-V)]. The same mixed-ligand complexes were obtained from the reaction of [Cu(4)L(I)(4)], [Cu(8)L(II)(8)], [Cu(3)L(III-V)(3)] with phen or PPh(3).     

Versatile ligand behavior of hydrotris(4-ethyl-3-methyl-5-thioxo-1,2,4-triazolyl)borate. Syntheses and crystal structures of Cu(I) and Bi(III) complexes

Preparations of copper(I) and bismuth(III) complexes of hydrotris(4-ethyl-3-methyl-5-thioxo-1,2,4-triazolyl)borate (Tr(Et,Me)) are described. These complexes have been characterized by means of spectroscopy and microanalysis. Molecular structures of [Cu(Tr(Et,Me))](2) x 2.5CH(3)CN x 0.5H(2)O (3a) and [Bi(Tr(Et,Me))(2)]NO(3) x 2CHCl(3) (4a) have been determined by single-crystal X-ray diffraction. In the centrosymmetric dimeric copper(I) complex, Tr(Et,Me) acts in the k(3)S,S',H:kS' ' coordination mode. The metal is found in a distorted trigonal geometry as the ligand exhibits an "S(3)-inverted" conformation at the boron center so that a weak [B-H.Cu] agostic interaction renders the overall coordination of the (3 + 1) type. On the other hand, in the bismuth complex, Tr(Et,Me) presents the k(3)S,S',S' ' coordination mode and the "S(3)-normal" conformation. The metal is found in a regular octahedral geometry bound by six thioxo groups of two ligands. Species distributions in solution have been studied using electrospray ionization mass spectrometry upon dissolution of 3a and 4a crystals in acetonitrile. Monomeric and polynuclear copper(I) complexes with different M:L ratios are present in solution, while for 4a only the monomeric species is present.     

Syntheses, characterization, and dioxygen reactivities of Cu(I) complexes with cis,cis-1,3,5-triaminocyclohexane derivatives: a Cu(III)2O2 intermediate exhibiting higher C-H activation

Six Cu(I) complexes with cis,cis-1,3,5-triaminocyclohexane derivatives (R3CY, R = Et, iBu, and Bn), [Cu(MeCN)(Et3CY)]SbF6 (1), [Cu(MeCN)(iBu3CY)]SbF6 (2), [Cu(MeCN)(Bn3CY)]SbF6 (3), [Cu(CO)(Et3CY)]SbF6 (4), [Cu(CO)(iBu3CY)]SbF6 (5), and [Cu(CO)(Bn3CY)]SbF6 (6), were prepared to probe the ability of copper complexes to effectively catalyze oxygenation reactions. The complexes were characterized by elemental analysis, electrochemical and X-ray structure analyses, electronic absorption spectroscopy, IR spectroscopy, 1H NMR spectroscopy, and ESI mass spectrometry. The crystal structures of 1-3 and 6 and the CO stretching vibrations (nuCO) of 4-6 demonstrate that the ability of R3CY to donate electron density to the Cu(I) atom is stronger than that of the previously reported ligands, 1,4,7-triazacyclononane (R3TACN) and 1,4,7-triazacyclodecane (R3TACD). Reactions of complexes 1-3 with dioxygen in THF or CH2Cl2 at -105 to -80 degrees C yield bis(mu-oxo)dicopper(III) complexes 7-9 as intermediates as confirmed by electronic absorption spectroscopy and resonance Raman spectroscopy. The Cu-O stretching vibrations, nu(Cu-O) for 7 (16O2: 553, 581 cm-1and 18O2: 547 cm-1) and 8 (16O2: 571 cm-1 and 18O2: 544 cm-1), are observed in a lower energy region than previously reported for bis(micro-oxo) complexes. The decomposition rates of complexes 7-9 in THF at -90 degrees C are 2.78 x 10-4 for 7, 8.04 x 10-4 for 8, and 3.80 x 10-4 s-1 for 9. The decomposition rates of 7 and 8 in CH2Cl2 were 5.62 x 10-4 and 1.62 x 10-3 s-1, respectively, and the thermal stabilities of 7-9 in CH2Cl2 are lower than the values measured for the complexes in THF. The decomposition reactions obeyed first-order kinetics, and the H/D isotope experiments for 8 and 9 indicate that the N-dealkylation reaction is the rate-determining step in the decomposition processes. On the other hand, the decomposition reaction of 7 in THF results in the oxidation of THF (acting as an exogenous substrate) to give 2-hydroxy tetrahydrofuran and gamma-butyrolactone as oxidation products. Detailed investigation of the N-dealkylation reaction for 8 by kinetic experiments using N-H/D at -90 degrees C showed a kinetic isotope effect of 1.25, indicating that a weak electrostatic interaction between the N-H hydrogen and mu-oxo oxygen contributes to the major effect on the rate-determining step of N-dealkylation. X-ray crystal structures of the bis(micro-hydroxo)dicopper(II) complexes, [Cu2(OH)2(Et3CY)2](CF3SO3)2 (10), [Cu2(OH)2(iBu3CY)2](CF3SO3)2 (11), and [Cu2(OH)2(Bn3CY)2](ClO4)2 (12), which have independently been prepared as the final products of bis(micro-oxo)dicopper(III) intermediates, suggest that an effective interaction between N-H and mu-oxo in the Cu(III)2(micro-O)2 core may enhance the oxidation ability of the metal-oxo species.     

Tri- and tetranuclear copper(II) complexes consisting of mononuclear Cu(II) chiral building blocks with a sugar-derived Schiff's base ligand

A new sugar-derived Schiff's base ligand N-(3-tert-butyl-2-hydroxybenzylidene)-4,6-O-ethylidene-beta-D-glucopyranosylamine (H3L1) has been developed which afforded the coordinatively labile, alcoholophilic trinuclear Cu(II) complex [Cu3(L1)2(CH3OH)(H2O)] (1). Complex 1 has been further used in the synthesis of a series of alcohol-bound complexes with a common formula of [Cu3(L1)2(ROH)2] (R = Me (2), Et (3), nPr (4), nBu (5), nOct (6)). X-ray structural analyses of complexes 2-6 revealed the collinearity of trinuclear copper(II) centers with Cu-Cu-Cu angles in the range of 166-172 degrees . The terminal and central coppers are bound with NO3 and O4 atoms, respectively, and exhibit square-planar geometry. The trinuclear structures of 2-6 can be viewed as the two {Cu(L1)}- fragments capture a copper(II) ion in the central position, which is further stabilized by a hydrogen-bonding interaction between the alcohol ligands and the sugar C-3 alkoxo group. Complex 2 exhibits a strong antiferromagnetic interaction between the Cu(II) ions (J = -238 cm(-1)). Diffusion of methanol into a solution of complex 1 in a chloroform/THF mixed solvent afforded the linear trinuclear complex [Cu(3)(L1)2(CH3OH)2(THF)2] (7). The basic structure of 7 is identical to complex 2; however, THF binding about the terminal coppers (Cu-O(THF) = 2.394(7) and 2.466(7) A) has introduced the square-pyramidal geometry, indicating that the planar trinuclear complexes 2-6 are coordinatively unsaturated and the terminal metal sites are responsible for further ligations. In the venture of proton-transfer reactions, a successful proton transfer onto the saccharide C-3 alkoxo group has been achieved using 4,6-O-ethylidene-d-glucopyranose, resulting in the self-assembled tetranuclear complex, [Cu4(HL1)4] (8), consisting of the mononuclear Cu(II) chiral building blocks, {Cu(HL1)}.     

Carbon monoxide coordination and reversible photodissociation in copper(I) pyridylalkylamine compounds

Systematic studies of CO coordination and photodissociation have been carried out for a series of copper(I) carbonyl compounds possessing tripodal tetradentate ligands, [CuI(L)(CO)]B(C6F5)4 (L = Me2N-TMPA (1Me2N), MeO-TMPA (1MeO), H-TMPA (1H), PMEA (2pmea), PMAP (2pmap), BQPA (3bqpa). Detailed structural, electrochemical, and infrared characterization has been accomplished. In addition, various experimental techniques were utilized to determine equilibrium binding constants (KCO), association (kCO), and dissociation (k-CO) rate constants, as well as the thermodynamic (DeltaH degrees , DeltaS degrees ) and activation parameters (DeltaH, DeltaS) that regulate these processes. With increased ligand-electron-donating ability, greater pi back-bonding results in stronger Cu-CO bonds, leading to KCO values on the order 1Me2N-CO > 1MeO-CO > 1H-CO. With systematic synthetic expansion of the five-membered chelate rings like 1R to six-membered chelate rings like 2R, the stability of the CO adduct decreases, 1H-CO > 2pmea-CO > 2pmap-CO. The CO-binding properties of 3bqpa did not follow trends observed for the other compounds, presumably because of its bulkier ligand framework. Through solid- and solution-state analyses, we concluded that the photolabile carbonyl species in solution possess a tridentate coordination mode, forming strictly five-membered chelate rings to the copper ion with one dangling arm of the tripodal ligand. Carbon monoxide reversibly photodissociated from complexes 1Me2N-CO, 1MeO-CO, 1H-CO, and 3bqpa-CO in coordinating (CH3CN) and weakly coordinating (THF) solvent but not from 2pmea-CO and 2pmap-CO. Comparisons to O2-binding data available for these copper complexes as well as to small molecule (O2, CO, NO) reactions with hemes and copper proteins are discussed.     

Synthesis and structural characterisation of (aryl-BIAN)copper(I) complexes and their application as catalysts for the cycloaddition of azides and alkynes

A series of Ar-BIAN-based copper(I) complexes (where Ar-BIAN = bis(aryl)acenaphthenequinonediimine) were synthesised and characterised by (1)H and (13)C NMR spectroscopies, FT-IR spectroscopy, MALDI-TOF-MS spectrometry, cyclic voltammetry and single crystal X-ray diffraction. The bis-chelated complexes of general formula [Cu(Ar-BIAN)(2)]BF(4) (where Ar = C(6)H(5) (1), 4-iPrC(6)H(4) (3), 2-iPrC(6)H(4) (4)) were prepared by reaction of [Cu(NCMe)(4)]BF(4) with two equivalents of the corresponding Ar-BIAN ligands, in dichloromethane, while the mono-chelated complexes of the type [Cu(Ar-BIAN)L(2)]BF(4) (where Ar = 2,6-iPr(2)C(6)H(3), L = PhCN (6); Ar = 4-iPrC(6)H(4), L = PPh(3) (7)) were readily accessible by treatment of [Cu(NCR)(4)]BF(4) (R = Me, Ph) with one equivalent of the corresponding Ar-BIAN ligands in the absence or presence of two equivalents of PPh(3), in the same solvent. The structures of complexes 3, 4, 6 and 7 were obtained by single crystal X-ray diffraction, showing distorted tetrahedral geometries around the copper centres in all cases. The electrochemical studies of these complexes and of the already reported [Cu(2,4,6-Me(3)C(6)H(2)-BIAN)(2)]BF(4) (2) and [Cu(2,6-iPr(2)C(6)H(3)-BIAN)(NCMe)(2)] (5), demonstrated that the bis-chelated complexes 1-4 undergo a reversible one-electron reduction or oxidation processes on copper, while the mono-chelated complexes 5-7 show a partially reversible oxidation and an irreversible reduction feature. Both kinds of (Ar-BIAN)copper(I) complexes are active catalysts for the copper(I)-catalysed azide-alkyne cycloaddition reaction (CuAAC). Complex 7, bearing PPh(3) ligands, exhibits the highest catalytic activity, which is comparable with that of the typical CuSO(4)-sodium ascorbate catalyst system.     

Tuning copper-dioxygen reactivity and exogenous substrate oxidations via alterations in ligand electronics

Copper(I)-dioxygen adducts are important in biological and industrial processes. For the first time we explore the relationship between ligand electronics, CuI-O2 adduct formation and exogenous substrate reactivity. The copper(I) complexes [CuI(R-MePY2)]+ (1R, where R = Cl, H, MeO, Me2N) were prepared; where R-MePY2 are 4-pyridyl substituted bis[2-(2-pyridyl)ethyl]methylamine chelates. Both the redox potential of 1R (ranging from E1/2 = -270 mV for 1Cl to -440 mV for 1MeN vs FeCp2/FeCp2+) and nuCO of the CO adducts of 1R (ranging from 2093 cm-1 for 1Cl-CO to 2075 cm-1 for 1Me2N-CO) display modest but expected systematic shifts. Dioxygen readily reacts with 1H, 1MeO, and 1Me2N, forming the side-on peroxo-CuII2 complexes [{CuII(R-MePY2)}2(O2)]2+ (2R, also containing some bis-mu-oxo-CuIII2 isomer), but there is no reaction with 1Cl. Stopped-flow studies in dichloromethane show that the formation of 2Me2N from dioxygen and 1Me2N proceeds with a k = 8.2(6) x 104 M-2 s-1 (183 K, DeltaH = -20.3(6) kJ mol-1, DeltaS = -219(3) J mol-1 K-1). Solutions of 2R readily oxidize exogenous substrates (9,10-dihydroanthracene --> anthracene, tetrahydrofuran (THF) --> 2-hydroxytetrahydrofuran (THF-OH), N,N-dimethylaniline --> N-methylaniline and formaldehyde, benzyl alcohol --> benzaldehyde, benzhydrol --> benzophenone, and methanol --> formaldehyde), forming the bis-mu-hydroxo-CuII2 complexes [{CuII(R-MePY2)(OH)}2]2+ (3R). Product yields increase as the R-group is made more electron-donating, and in some cases are quantitative with 2Me2N. Pseudo-first-order rate constants for THF and methanol oxidation reactions demonstrate a remarkable R-group dependence, again favoring the strongest ligand donor (i.e., R = Me2N). For THF oxidation to THF-OH a nearly 1500-fold increase in reaction rate is observed (kobs = 2(1) x 10-5 s-1 for 2H to 3(1) x 10-2 s-1 for 2Me2N), while methanol oxidation to formaldehyde exhibits an approximately 2000-fold increase (kobs = 5(1) x 10-5 s-1 for 2H to 1(1) x 10-1 s-1 for 2Me2N).     

Complexes of N-thiophosphorylthioureas (HL) with copper(I). Crystal structures of [Cu3L3] and [Cu(PPh3)2L] chelates

Reaction of the potassium salts of N-thiophosphorylated thioureas of common formula RC(S)NHP(S)(OiPr)(2) [R = morpholin-N-yl (HL(a)), piperidin-N-yl (HL(b)), NH(2) (HL(c)), PhCH(2)NH (HL(d))] with Cu(PPh(3))(3)I in aqueous EtOH/CH(2)Cl(2) leads to mononuclear [Cu(PPh(3))(2)L-S,S'] complexes. Using copper(i) iodide instead of Cu(PPh(3))(3)I, polynuclear complexes [Cu(n)(L-S,S')(n)] were obtained. The structures of these compounds were investigated by ES-MS, elemental analyses, 1H and 31P NMR in solution, IR and 31P solid-state MAS NMR spectroscopy. The crystal structures of [Cu(3)L(3)(a)] and [Cu(PPh(3))(2)L(b)] were determined by single-crystal X-ray diffraction.     

Synthesis and reactivity of bis(imido) uranium(VI) cyclopentadienyl complexes

The bis(imido) uranium(VI)-C(5)H(5) and -C(5)Me(5) complexes (C(5)H(5))(2)U(N(t)Bu)(2), (C(5)Me(5))(2)U(N(t)Bu)(2), (C(5)H(5))U(N(t)Bu)(2)(I)(dmpe), and (C(5)H(5))(2)U(N(t)Bu)(2)(dmpe) can be synthesized from reactions between U(N(t)Bu)(2)(I)(2)(L)(x) (L=THF, x=2; L=dmpe, x=1) and Na(C(5)R(5)) (R=H, Me); these complexes represent the first structurally characterized C(5)H(5)-compounds of uranium(VI) and they further highlight the differences between UO(2)(2+) and the bis(imido) fragment.