Synthesis, structure, and reactivity of O-donor Ir(III) complexes: C-H activation studies with benzene

Various new thermally air- and water-stable alkyl and aryl analogues of (acac-O,O)2Ir(R)(L), R-Ir-L (acac-O,O = kappa2-O,O-acetylacetonate, -Ir- is the trans-(acac-O,O)2Ir(III) motif, R = CH3, C2H5, Ph, PhCH2CH2, L = Py) have been synthesized using the dinuclear complex [Ir(mu-acac-O,O,C3)-(acac-O,O)(acac-C3)]2, [acac-C-Ir]2, or acac-C-Ir-H2O. The dinuclear Ir (III) complexes, [Ir(mu-acac-O,O,C3)-(acac-O,O)(R)]2 (R = alkyl), show fluxional behavior with a five-coordinate, 16 electron complex by a dissociative pathway. The pyridine adducts, R-Ir-Py, undergo degenerate Py exchange via a dissociative mechanism with activation parameters for Ph-Ir-Py (deltaH++ = 22.8 +/- 0.5 kcal/mol; deltaS++ = 8.4 +/- 1.6 eu; deltaG++298 K) = 20.3 +/- 1.0 kcal/mol) and CH3-Ir-Py (deltaH++ = 19.9 +/- 1.4 kcal/mol; deltaS++ = 4.4 +/- 5.5 eu; deltaG++298 K) = 18.6 +/- 0.5 kcal/mol). The trans complex, Ph-Ir-Py, undergoes quantitatively trans-cis isomerization to generate cis-Ph-Ir-Py on heating. All the R-Ir-Py complexes undergo quantitative, intermolecular CH activation reactions with benzene to generate Ph-Ir-Py and RH. The activation parameters (deltaS++ =11.5 +/- 3.0 eu; deltaH++ = 41.1 +/- 1.1 kcal/mol; deltaG++298 K = 37.7 +/- 1.0 kcal/mol) for CH activation were obtained using CH3-Ir-Py as starting material at a constant ratio of [Py]/[C6D6] = 0.045. Overall the CH activation reaction with R-Ir-Py has been shown to proceed via four key steps: (A) pre-equilibrium loss of pyridine that generates a trans-five-coordinate, square pyramidal intermediate; (B) unimolecular, isomerization of the trans-five-coordinate to generate a cis-five-coordinate intermediate, cis-R-Ir- square; (C) rate-determining coordination of this species to benzene to generate a discrete benzene complex, cis-R-Ir-PhH; and (D) rapid C-H cleavage. Kinetic isotope effects on the CH activation with mixtures of C6H6/C6D6 (KIE = 1) and with 1,3,5-C6H3D3 (KIE approximately 3.2 at 110 degrees C) are consistent with this reaction mechanism.     

Addition of Pt(PBu(t)(3)) groups to Ru(5)(CO)(12)(eta(6)-C(6)H(6))(mu(5)-C). Synthesis, structures, and dynamical activity

The reaction of Ru(5)(CO)(12)(eta(6)-C(6)H(6))(mu(5)-C), 7, with Pt(PBu(t)(3))(2) yielded two products Ru(5)(CO)(12)(eta(6)-C(6)H(6))(mu(6)-C)[Pt(PBu(t)(3))], 8, and Ru(5)(CO)(12)(eta(6)-C(6)H(6))(mu(6)-C)[Pt(PBu(t)(3))](2), 9. Compound 8 contains a Ru(5)Pt metal core in an open octahedral structure. In solution, 8 exists as a mixture of two isomers that interconvert rapidly on the NMR time scale at 20 degrees C, DeltaH() = 7.1(1) kcal mol(-1), DeltaS() = -5.1(6) cal mol(-)(1) K(-)(1), and DeltaG(298)(#) = 8.6(3) kcal mol(-1). Compound 9 is structurally similar to 8, but has an additional Pt(PBu(t)(3)) group bridging an Ru-Ru edge of the cluster. The two Pt(PBu(t)(3)) groups in 9 rapidly exchange on the NMR time scale at 70 degrees C, DeltaH(#) = 9.2(3) kcal mol(-)(1), DeltaS(#) = -5(1) cal mol(-)(1) K(-)(1), and DeltaG(298)(#) = 10.7(7) kcal mol(-1). Compound 8 reacts with hydrogen to give the dihydrido complex Ru(5)(CO)(11)(eta(6)-C(6)H(6))(mu(6)-C)[Pt(PBu(t)(3))](mu-H)(2), 10, in 59% yield. This compound consists of a closed Ru(5)Pt octahedron with two hydride ligands bridging two of the four Pt-Ru bonds.     

Lewis acid-base interactions between metal atoms and their applications for the synthesis of bimetallic cluster complexes

A series of new palladium-ruthenium cluster complexes have been prepared by adding Pd(PBu(t)(3)) fragments to the ruthenium-ruthenium bonds of ruthenium carbonyl complexes. Reaction of Pd(PBu(t)(3))(2) with Ru(3)(CO)(12) yielded the tripalladium adduct Ru(3)(CO)(12)[Pd(PBu(t)(3))](3) 1. Compound 1 contains three Pd(PBu(t)(3)) groups symmetrically disposed with each one acting as a bridge across one Ru-Ru bond of the former Ru(3)(CO)(12) molecule. Reaction of Pd(PBu(t)(3))(2) with Ru(6)(CO)(17)(C) yielded the dipalladium adduct Ru(6)(CO)(17)(C)[Pd(PBu(t)(3))](2) 2. Compound 2 exists as two isomers in the solid state. One isomer has Pd(PBu(t)(3)) groups bridging two edges of the Ru(6) octahedron. The other isomer has a Pd(PBu(t)(3)) group bridging one edge of the Ru(6) octahedron, and the other is a triple bridge. The reaction of Pd(PBu(t)(3))(2) with Ru(CO)(5) yielded the dipalladium-diruthenium complex Ru(2)(CO)(9)[Pd(PBu(t)(3))](2) 3, a dipalladium adduct of the unstable molecule Ru(2)(CO)(9).     

Dinuclear ruthenium and iron complexes containing palladium and platinum with tri-tert-butylphosphine ligands: synthesis, structures, and bonding

The reaction of Pd(PBu(t)(3))(2) with Ru(CO)(5) yielded the dipalladium-diruthenium cluster complex Ru(2)(CO)(9)[Pd(PBu(t)(3))](2), 10. The reaction of Pt(PBu(t)(3))(2) with Ru(CO)(5) at room temperature afforded the diplatinum-diruthenium cluster complex Ru(2)(CO)(9)[Pt(PBu(t)(3))](2), 12, and the monoplatinum-diruthenium cluster PtRu(2)(CO)(9)(PBu(t)(3)), 11. All three complexes contain a diruthenium group with bridging Pd(PBu(t)(3)) or Pt(PBu(t)(3)) groups. Compound 11 can be converted to 12 by reaction with an additional quantity of Pt(PBu(t)(3))(2). The reaction of 12 with hydrogen at 68 degrees C yielded the dihydrido complex Pt(2)Ru(2)(CO)(8)(PBu(t)(3))(2)(micro-H)(2), 13. This complex contains a Ru(2)Pt(2) cluster with hydride ligands bridging two of the Ru-Pt bonds. The reaction of Fe(2)(CO)(9) with Pt(PBu(t)(3))(2) yielded the platinum-diiron cluster complex PtFe(2)(CO)(9)(PBu(t)(3)), 14, which is analogous to 11. All new complexes were characterized crystallographically. Molecular orbital calculations of 10 reveal an unusual delocalized metal-metal bonding system involving the Pd(PBu(t)(3)) groups and the Ru(2)(CO)(9) group.     

Determination of interconversion barriers by dynamic gas chromatography: epimerization of chalcogran

The four stereoisomers of chalcogran 1 ((2RS,SRS)-2-ethyl-1,6-di-oxaspiro[4.4]nonane), the principal component of the aggregation pheromone of the bark beetle pityogenes chalcographus, are prone to interconversion at the spiro center (C5). During diastereo- and enantioselective dynamic gas chromatography (DGC), epimerization of 1 gives rise to two independent interconversion peak profiles, each featuring a plateau between the peaks of the interconverting epimers. To determine the rate constants of epimerization by dynamic gas chromatography (DGC), equations to simulate the complex elution profiles were derived, using the theoretical plate model and the stochastic model of the chromatographic process. The Eyring activation parameters of the experimental interconversion profiles, between 70 and 120 C in the presence of the chiral stationary phase (CSP) Chirasil-beta-Dex, were then determined by computer-aided simulation with the aid of the new program Chrom-Win: (2R,5R)-1: deltaG(++) (298.15 K) = 108.0 +/-0.5 kJ mol(-1), deltaH(++) = 47.1+/-0.2 kJ mol(-1), deltaS(++) = -204+/-6 JK(-1) mol(-1): (2R,5S)-1: deltaG(++) (298.15 K) = 108.5+/-0.5 kJ mol(-1), deltaH(++) = 45.8+/-0.2 kJ mol(-1), deltaS(++) = -210 +/-6 J K mol(-1); (2S,5S)-1: deltaG(++) (298.15 K)= 108.1+/-0.5 kJ mol(-1), deltaH(++) = 49.3+/-0.3 kJ mol(-1), deltaS(++) = -197+/-8 J K(-1) mol(-1); (2S,5R)-1: deltaG(++) (298.15 K)=108.6+/-0.5 kJ mol(-1), deltaH(++) = 48.0+/-0.3 kJ mol(-1), deltaS(++) = -203+/-8 J K(-1) mol(-1). The thermodynamic Gibbs free energy of the E/Z equilibrium of the epimers was determined by the stopped-flow multidimensional gas chromatographic technique: deltaG(E/Z) (298.15 K)= -0.5 kJ mol(-1), deltaH(E/Z) = 1.4 kJ mol(-1) and deltaS(E/Z) = 6.3 J K(-1) mol(-1). An interconversion pathway proceeding through ring-opening and formation of a zwitterion and an enol ether/alcohol intermediate of 1 is proposed.     

d-orbital effects on stereochemical non-rigidity: twisted Ti(IV) intramolecular dynamics

The isomerization dynamics of tris-catecholate complexes have been investigated by variable-temperature NMR methods, demonstrating that the intramolecular racemization of Delta and Lambda enantiomers of d0 Ti(IV) is facile and faster than that of d10 Ga(III) and Ge(IV) analogues. Activation parameters for the racemization of K2[Ti2(3)] (H(2)2 = 2,3-dihydroxy-N,N'-diisopropylterephthalamide) were determined from line shape analysis of 1H NMR spectra [methanol-d4: deltaH++ = 47(1) kJ/mol; deltaS++ = -34(4) J/mol K; deltaG++(298) = 57(3) kJ/mol; DMF-d7: deltaH++ = 55(1) kJ/mol; deltaS++ = -16(4) J/mol K; deltaG++(298) = 59(3) kJ/mol; D2O (pD* = 8.6, 20% MeOD): deltaH++ = 48(3) kJ/mol; deltaS++ = -28(10) J/mol K; deltaG++(298) = 56(3) kJ/mol]. The study of K2[Ti4(3)] (H(2)4 = 2,3-dihydroxy-N-tert-butyl-N'-benzylterephthalamide) reveals two distinct isomerization processes: faster racemization of mer-[Ti4(3)]2- by way of a Bailar twist mechanism (D3h transition state) [T(c) approximately 242 K, methanol-d4], and a slower merright harpoon over left harpoonfac [Ti4(3)]2- isomerization by way of a Ray-Dutt mechanism (C2v transition state) [T(c) approximately 281 K, methanol-d4]. The solution behavior of the Ti(IV) complexes mirrors that reported previously for analogous Ga(III) complexes, while that of analogous Ge(IV) complexes was too inert to be detected by 1H NMR up to 400 K. These experimental findings are augmented by DFT calculations of the ML3 ground states and Bailar and Ray-Dutt transition states, which correctly predict the relative kinetic barriers of complexes of the three metal ions, in addition to faithfully reproducing the ground-state structures. Orbital calculations support the conclusion that participation of the Ti(IV) d orbitals in ligand bonding contributes to the greater stabilization of the prismatic Ti(IV) transition states.     

Homolysis of weak Ti-O bonds: experimental and theoretical studies of titanium oxygen bonds derived from stable nitroxyl radicals

Titanium-oxygen bonds derived from stable nitroxyl radicals are remarkably weak and can be homolyzed at 60 degrees C. The strength of these bonds depends sensitively on the ancillary ligation at titanium. Direct measurements of the rate of Ti-O bond homolysis in Ti-TEMPO complexes Cp2TiCl(TEMPO) (3) and Cp2TiCl(4-MeO-TEMPO) (4) (TEMPO = 2,2,6,6-tetramethylpiperidine-N-oxyl, 4-MeO-TEMPO = 2,2,6,6-tetramethyl-4-methoxypiperidine-N-oxyl) were conducted by nitroxyl radical exchange experiments. Eyring plots gave the activation parameters, deltaH++ = 27(+/- 1) kcal/mol, deltaS++ = 6.9(+/- 2.3) eu for 3 and deltaH++ = 28(+/- 1) kcal/mol, deltaS++ = 9.0(+/- 3.0) eu for 4, consistent with a process involving the homolysis of a weak Ti-O bond to generate the transient Cp2Ti(III)Cl and the nitroxyl radical. Thermolysis of the titanocene TEMPO complexes in the presence of epoxides leads to the Cp2Ti(III)Cl-mediated ring-opening of the epoxide followed by trapping by the nitroxyl radical. The X-ray crystal structure of the Ti-TEMPO derivative, Cp2TiCl(4-MeO-TEMPO) (4), is reported. DFT (B3LYP/6-31G*) calculations and experimental studies reveal that the strength of the Ti-O bond decreases dramatically with the number of cyclopentadienyl groups on titanium. The calculated Ti-O bond strength of the monocyclopentadienyl complex 2 is 43 kcal/mol, whereas that of the biscyclopentadienyl complex 3 is 17 kcal/mol, a difference of 26 kcal/mol. These studies reveal that the strength of these Ti-O bonds can be tuned over an interesting and experimentally accessible temperature range by appropriate ligation on titanium.     

Gas chromatographic determination of the interconversion energy barrier for dialkyl 2,3-pentadienedioate enantiomers

The enantiomers of dialkyl 2,3-pentadienedioate undergo interconversion during gas chromatographic separation on chiral stationary phases. In this paper the on-column apparent interconversion kinetic and thermodynamic activation data were determined for dimethyl, diethyl, propylbutyl and dibutyl 2,3-pentadienedioate enantiomers by gas chromatographic separation of the racemic mixtures on a capillary column containing a polydimethylsiloxane stationary phase coupled to 2,3-di-O-methyl-6-O-tertbutyldimethylsilyl-beta-cyclodextrin. A deconvolution method was used to determine the individual enantiomer peak areas and retention times that are needed to calculate the interconversion rate constants and the energy barriers. The apparent rate constants and interconversion energy barriers decrease slightly with an increase in the alkyl chain length of the dialkyl 2,3-pentadienedioate esters. The optimum conformation of the dialkyl 2,3-pentadienedioate molecules, their separation selectivity factors and apparent interconversion enthalpy and entropy data changes with the alkyl chain length. The dependence of the apparent interconversion energy barrier (deltaG(app)(a-->b), deltaG(app)(b-->a)) on temperature was used to determine the apparent activation enthalpy (deltaH(app)(a-->b), deltaH(app)(b-->a)) and apparent entropy (deltaS(app)(a-->b), deltaS(app)(a-->b)) (where a denotes the first and b second eluted enantiomer). The comparison of the activation enthalpy and entropy (deltaS(app)(a-->b), deltaS(app)(a-->b)) indicated that the interconversion of dialkyl 2,3-pentadienedioate enantiomers on the HP-5+Chiraldex B-DM column series is an entropy driven process at 160 degrees C. Data obtained for dimethyl 2,3-pentadienedioate enantiomers on the HP-5+Chiraldex B-DM column series at 120 degrees C (deltaG(app)(a-->b) = 123.3 and deltaG(app)(b-->a) = 124.4 kJ mol(-1)) corresponds (at the 95% confidence interval) with the value of deltaG(#) = 128+/-1 kJ mol(-1) found at this temperature by gas chromatography using a two-dimensional stop flow technique on an empty capillary column [V. Schurig, F. Keller, S. Reich, M. Fluck, Tetrahedron: Asymmetry 8 (1997) 3475].     

Experimental and theoretical aspects of the haptotropic rearrangement of diiron and diruthenium carbonyl complexes bound to 4,6,8-trimethylazulene

The haptotropic rearrangement of dinuclear metal carbonyl species on the conjugate pi-ligand of (micro2,eta3:eta5-4,6,8-trimethylazulene)M2(CO)5 [M = Fe (3) and Ru (4)] was investigated in detail both experimentally and theoretically. The complexes, 3 and 4, were synthesized and characterized by spectroscopy and crystallography. The spin saturation transfer technique of 1H NMR was used to measure the rate constant k of the haptotropic isomerization between the two enantiomers of 3 and 4, from which thermodynamic parameters were determined: (3; deltaS(double dagger) = -7 +/- 1 cal K(-1) mol(-1), deltaH(double dagger) = 22 +/- 1 cal mol(-1), deltaG(double dagger)373 = 25 +/- 1 cal mol(-1)), (4; deltaS(double dagger) = 7 +/- 1 cal K(-1) mol(-1), deltaH(double dagger) = 25 +/- 1 cal mol(-1), deltaG(double dagger)373 = 23 +/- 1 cal mol(-1)). DFT calculations (the B3LYP, B1B95 and PBE1PBE methods) were also carried out using the CEP-31G and cc-pVDZ as the basis set of the transition metal and other elements, respectively, by which both ground state and transition state structures were optimized for the haptotropic rearrangement of 3 and 4. The potential energy surface for these reactions suggests that the reaction involves the conversion of the coordination mode from micro2eta3,eta5- (ground state) to micro2,eta1,eta5- (transition state). Mechanistic consideration, in particular that of differences in transition states between the diiron and diruthenium complexes, is also described.     

Mechanism of ruthenium-catalyzed hydrogen transfer reactions. Concerted transfer of OH and CH hydrogens from an alcohol to a (Cyclopentadienone)ruthenium complex

Kinetic studies of the ruthenium-catalyzed dehydrogenation of 1-(4-fluorophenyl)ethanol (4) by tetrafluorobenzoquinone (7) using the Shvo catalyst 1 at 70 degrees C show that the dehydrogenation by catalytic intermediate 2 is rate-determining with the rate = k[4][1](1/2) and with deltaH++ = 17.7 kcal mol(-1) and deltaS++ = -13.0 eu. The use of specifically deuterated derivative 4-CHOD and 4-CDOH gave individual isotope effects of k(CHOH)/k(CHOD) = 1.87 +/- 0.17 and k(CHOH)/k(CDOH) = 2.57 +/- 0.26, respectively. Dideuterated derivative 4-CDOD gave a combined isotope effect of k(CHOH)/k(CDOD) = 4.61 +/- 0.37. These isotope effects are consistent with a concerted transfer of both hydrogens of the alcohol to ruthenium species 2.     

Platinum-osmium cluster complexes from the addition of Pt(PBut3) groups to Os3(CO)12

Three new compounds, PtOs(3)(CO)(12)(PBu(t)(3)) (10), Pt(2)Os(3)(CO)(12)(PBu(t)(3))(2) (11), and Pt(3)Os(3)(CO)(12)(PBu(t)(3))(3) (12), have been obtained from the reaction of Pt(PBu(t)(3))(2) with Os(3)(CO)(12) (9). The products were formed by the sequential addition of 1-3 Pt(PBu(t)(3)) groups to the three Os-Os bonds of the metal cluster of Os(3)(CO)(12). In solution, compounds 10-12 interconvert among themselves by intermolecular exchange of the Pt(PBu(t)(3)) groups. When 11 is treated with PPh(3), the mono- and bis(PPh(3)) derivatives of 9, Os(3)(CO)(11)(PPh(3)) and Os(3)(CO)(10)(PPh(3))(2), were obtained by elimination of the Pt(PBu(t)(3)) groups together with one and two CO ligands, respectively. When heated, compound 11 was transformed into the new compound Pt(2)Os(3)(CO)(10)(PBu(t)(3))(PBu(t)(2)CMe(2)CH(2))(mu-H) (13) by the loss of two CO ligands and a metalation of one of the methyl groups of one of the PBu(t)(3) ligands. Compounds 10-13 have been characterized by single-crystal X-ray diffraction analyses.     

Dynamical intramolecular metal-to-metal ligand exchange of phosphine and thioether ligands in derivatives PtRu5(CO)16(mu6-C)

The complexes PtRu(5)(CO)(15)(PMe(2)Ph)(mu(6)-C) (2), PtRu(5)(CO)(14)(PMe(2)Ph)(2)(mu(6)-C) (3), PtRu(5)(CO)(15)(PMe(3))(mu(6)-C) (4), PtRu(5)(CO)(14)(PMe(3))(2)(mu(6)-C) (5), and PtRu(5)(CO)(15)(Me(2)S)(mu(6)-C) (6) were obtained from the reactions of PtRu(5)(CO)(16)(mu(6)-C) (1) with the appropriate ligand. As determined by NMR spectroscopy, all the new complexes exist in solution as a mixture of isomers. Compounds 2, 3, and 6 were characterized crystallographically. In all three compounds, the six metal atoms are arranged in an octahedral geometry, with a carbido carbon atom in the center. The PMe(2)Ph and Me(2)S ligands are coordinated to the Pt atom in 2 and 6, respectively. In 3, the two PMe(2)Ph ligands are coordinated to Ru atoms. In solution, all the new compounds undergo dynamical intramolecular isomerization by shifting the PMe(2)Ph or Me(2)S ligand back and forth between the Pt and Ru atoms. For compound 2, DeltaH++ = 15.1(3) kcal/mol, DeltaS++ = -7.7(9) cal/(mol.K), and DeltaG(298) = 17.4(6) kcal/mol for the transformation of the major isomer to the minor isomer; for compound 4, DeltaH++ = 14.0(1) kcal/mol, DeltaS++ = -10.7(4) cal/(mol.K), and DeltaG(298) = 17.2(2) kcal/mol for the transformation of the major isomer to the minor isomer; for compound 6, DeltaH++ = 18(1) kcal/mol, DeltaS++ = 21(5) cal/(mol.K) and DeltaG(298) = 12(2) kcal/mol. The shifts of the Me(2)S ligand in 6 are significantly more facile than the shifts for the phosphine ligand in compounds 2-5. This is attributed to a more stable ligand-bridged intermediate for the isomerizations of 6 than that for compounds 2-5. The intermediate for the isomerization of 6 involves a bridging Me(2)S ligand that can use two lone pairs of electrons for coordination to the metal atoms, whereas a tertiary phosphine ligand can use only one lone pair of electrons for bridging coordination.     

Oxidative cleavage of tetraaryltetraphosphane-1,4-diides by nickel(II) and palladium(II): formation of unusual Ni(0) and Pd(0) diaryldiphosphene complexes

[Na(2)(thf)(4)(P(4)Mes(4))] (1) (Mes = 2,4,6-Me(3)C(6)H(2)) reacts with one equivalent of [NiCl(2)(PEt(3))(2)], [NiCl(2)(PMe(2)Ph)(2)], [PdCl(2)(PBu(n)(3))(2)] or [PdCl(2)(PMe(2)Ph)(2)] to give the corresponding nickel(0) and palladium(0) dimesityldiphosphene complexes [Ni(eta(2)-P(2)Mes(2))(PEt(3))(2)] (2), [Ni(eta(2)-P(2)Mes(2))(PMe(2)Ph)(2)] (3), [Pd(eta(2)-P(2)Mes(2))(PBu(n)(3))(2)] (4) and [Pd(eta(2)-P(2)Mes(2))(PMe(2)Ph)(2)] (5), respectively, via a redox reaction. The molecular structures of the diphosphene complexes 2-5 are described.     

Solvent effects on the conversion of dicopper(II) micro-eta(2):eta(2)-peroxo to bis-micro-oxo dicopper(III) complexes: direct probing of the solvent interaction

A new tridentate ligand, PYAN, is employed to investigate solvent influences for dioxygen reactivity with [Cu(PYAN)(MeCN)]B(C(6)F(5))(4) (1). Stopped-flow kinetic studies confirm that the adducts [[u(II)(PYAN)]2)(O(2))][B(C(6)F(5))(4)](2) (2(Peroxo)) and [[u(III)(PYAN)]2)(O)(2)][B(C(6)F(5))(4)](2) (2(Oxo)) are in rapid equilibrium. Thermodynamic parameters for the equilibrium between 2(Peroxo) and 2(Oxo) re as follows: THF, deltaH degrees approximately -15.7 kJ/mol, deltaS degrees approximately -83 J/K.mol; acetone, deltaH degrees approximately -15.8 kJ/mol, deltaS degrees approximately -76 J/K.mol. UV-visible absorption and resonance Raman spectroscopic signatures demonstrate that the equilibrium is highly solvent dependent; the mixture is mostly 2(Peroxo) in CH(2)Cl(2), but there are significantly increasing quantities of 2(Oxo) along the series methylene chloride --> diethyl ether --> acetone --> tetrahydrofuran (THF). Copper(II)-N(eq) stretches (239, 243, 244, and 246 cm(-)(1) in CH(2)Cl(2), Et(2)O, acetone, and THF, respectively) are identified for 2(Peroxo), but they are not seen in 2(Oxo), revealing for the first time direct evidence for solvent coordination in the more open 2(Peroxo) structure.     

Platinum-rhodium carbonyl clusters: new structures and new types of dynamical activity

The reaction of Rh(4)(CO)(12) with Pt(PBu(t)(3))(2) in CH(2)Cl(2) at room temperature yielded three new complexes: Rh(4)(CO)(4)-(mu-CO)(4)(mu(4)-CO)(PBu(t)(3))(2)[Pt(PBu(t)(3))], 10, Rh(2)(CO)(8)[Pt(PBu(t)(3))](2)[Pt(CO)], 11, and Rh(2)(CO)(8)[Pt(PBu(t)(3))](3), 12. The reaction of Rh(4)(CO)(12) with an excess of Pt(PBu(t)(3))(2) in hexane at 68 degrees C yielded the new hexarhodium-tetraplatinum compound, Rh(6)(CO)(16)[Pt(PBu(t)(3))](4), 13, in a low yield. All four compounds were characterized by (31)P NMR and single-crystal X-ray diffraction analyses. Compound 10 contains an unsymmetrical quadruply bridging carbonyl ligand in the fold of a butterfly tetrahedral cluster of four rhodium atoms with a Pt(PBu(t)(3)) group bridging the hinge of the butterfly tetrahedron. Compound 11 contains an unsaturated trigonal bipyramidal Rh(2)Pt(3) cluster. Compound 12 is similar to 11 except the trigonal bipyramidal Rh(2)Pt(3) cluster opened by cleavage of one Pt-Rh bond due to steric interactions produced by the replacement of one of the carbonyl ligands in 11 with a tri-tert-butylphosphine ligand. Compound 12 undergoes facile dynamical rearrangements of the metal atoms in the cluster which average the three inequivalent phosphine ligands on the platinum atoms. Compound 13 contains an octahedral cluster of six rhodium atoms with four Pt(PBu(t)(3)) groups bridging edges of that octahedron.     

Mechanism of the hydrogenation of ketones catalyzed by trans-dihydrido(diamine)ruthenium II complexes

The complexes trans-RuH(Cl)(tmen)(R-binap) (1) and (OC-6-43)-RuH(Cl)(tmen)(PPh(3))(2) (2) are prepared by the reaction of the diamine NH(2)CMe(2)CMe(2)NH(2) (tmen) with RuH(Cl)(PPh(3))(R-binap) and RuH(Cl)(PPh(3))(3), respectively. Reaction of KHB(sec)Bu(3) with 1 yields trans-Ru(H)(2)(R-binap)(tmen) (5) while reaction of KHB(sec)Bu(3) or KO(t)Bu with 2 under Ar yields the new hydridoamido complex RuH(PPh(3))(2)(NH(2)CMe(2)CMe(2)NH) (4). Complex 4 has a distorted trigonal bipyramidal geometry with the amido nitrogen in the equatorial plane. Loss of H(2) from 5 results in the related complex RuH(R-binap)(NH(2)CMe(2)CMe(2)NH) (3). Reaction of H(2) with 4 yields the trans-dihydride (OC-6-22)-Ru(H)(2)(PPh(3))(2)(tmen)(6). Calculations support the assignment of the structures. The hydrogenation of acetophenone is catalyzed by 5 or 4 in benzene or 2-propanol without the need for added base. For 5 in benzene at 293 K over the ranges of concentrations [5] = 10(-)(4) to 10(-)(3) M, [ketone] = 0.1 to 0.5 M, and of pressures of H(2) = 8 to 23 atm, the rate law is rate = k[5][H(2)] with k = 3.3 M(-1) s(1), DeltaH++ = 8.5 +/- 0.5 kcal mol(-1), DeltaS++ = -28 +/- 2 cal mol(-1) K(-1). For 4 in benzene at 293 K over the ranges of concentrations [4] = 10(-4) to 10(-3) M, [ketone] 0.1 to 0.7 M, and of pressures of H(2) = 1 to 6 atm, the preliminary rate law is rate = k[4][H(2)] with k = 1.1 x 10(2) M(-1) s(-1), DeltaH++ = 7.6 +/- 0.3 kcal mol(-1), DeltaS++ = -23 +/- 1 cal mol(-1) K(-1). Both theory and experiment suggest that the intramolecular heterolytic splitting of dihydrogen across the polar Ru=N bond of the amido complexes 3 and 4 is the turn-over limiting step. A transition state structure and reaction energy profile is calculated. The transfer of H(delta+)/H(delta-) to the ketone from the RuH and NH groups of 5 in a Noyori metal-ligand bifunctional mechanism is a fast process and it sets the chirality as (R)-1-phenylethanol (62-68% ee) in the hydrogenation of acetophenone. The rate of hydrogenation of acetophenone catalyzed by 5 is slower and the ee of the product is low (14% S) when 2-propanol is used as the solvent, but both the rate and ee (up to 55% R) increase when excess KO(t)Bu is added. The formation of ruthenium alkoxide complexes in 2-propanol might explain these observations. Alkoxide complexes [RuP(2)]H(OR)(tmen), [RuP(2)] = Ru(R-binap) or Ru(PPh(3))(2), R= (i) Pr, CHPhMe, (t)Bu, are observed by reacting the alcohols (i)PrOH, phenylethanol, and (t)BuOH with the dihydrides 5 and 6, respectively, under Ar. In the absence of H(2), the amido complexes 3 and 4 react with acetophenone to give the ketone adducts [RuP(2)]H(O=CPhMe)(NH(2)CMe(2)CMe(2)NH) in equilibrium with the enolate complexes trans- [RuP(2)](H)(OCPh=CH(2))(tmen) and eventually the decomposition products [RuP(2)]H(eta(5)-CH(2)CPhCHCPhO), with the binap complex characterized crystallographically. In general, proton transfer from the weakly acidic molecules dihydrogen, alcohol, or acetophenone to the amido nitrogen of complexes 3 and 4 is favored in two ways when the molecule coordinates to ruthenium: (1) an increase in acidity of the molecule by the Lewis acidic metal and (2) an increase in the basicity of the amido nitrogen caused by its pyramidalization. The formato complexes trans-[RuP(2)]H(OCHO)(tmen) were prepared by reacting the respective complex 4 or 5 with formic acid. The crystal structure of RuH(OCHO)(PPh(3))(2)(tmen) displays similar features to the calculated transition state for H(delta+)/H(delta-) transfer to the ketone in the catalytic cycle.     

Synthesis and properties of palladium diselenolenes: X-ray crystal structures of [Pd[SeC(R(1))=C(R(2))Se](PBu(3))(2)] [R(1), R(2) = (CH(2))(n), n = 4, 5, 6

The reaction between [Pd(2)(dba)(3)] (dba = dibenzylideneacetone), tributylphosphine, and a bis(cycloalkeno)-1,4-diselenin leads to either a mononuclear diselenolene [Pd[SeC(R(1))=C(R(2))Se](PBu(3))(2)] or a dinuclear diselenolene [Pd(2)[SeC(R(1))=C(R(2))Se](2)(PBu(3))(2)] [R(1), R(2) = (CH(2))(n), n = 4, 5, 6] depending on the stoichiometry employed. Treatment of the dinuclear diselenolenes with 1,2-bis(diphenylphosphino)ethane (dppe) provides a high-yielding route to the mononuclear species [Pd[SeC(R(1))=C(R(2))Se](dppe)]. All new compounds have been characterized by standard spectroscopic and analytical techniques, in particular by multinuclear NMR spectroscopy; the structure of each of the mononuclear tributylphosphine complexes has been determined by X-ray crystallography. Computational studies show that the observed asymmetry of the diselenolenes in the solid state is a result primarily of intramolecular repulsive interactions between the ligands.     

3,3'-Bis(trisarylsilyl)-substituted binaphtholate rare earth metal catalysts for asymmetric hydroamination

Chiral 3,3'-bis(trisarylsilyl)-substituted binaphtholate rare earth metal complexes (R)-[Ln{Binol-SiAr3}(o-C6H4CH2NMe2)(Me2NCH2Ph)] (Ln = Sc, Lu, Y; Binol-SiAr3 = 3,3'-bis(trisarylsilyl)-2,2'-dihydroxy-1,1'-binaphthyl; Ar = Ph (2-Ln), 3,5-xylyl (3-Ln)) and (R)-[La{Binol-Si(3,5-xylyl)3}{E(SiMe3)2}(THF)2] (E = CH (4a), N (4b)) are accessible via facile arene, alkane, and amine elimination. They are efficient catalysts for the asymmetric hydroamination/cyclization of aminoalkenes, giving TOF of up to 840 h(-1) at 25 degrees C for 2,2-diphenyl-pent-4-enylamine (5c) using (R)-2-Y. Enantioselectivities of up to 95% ee were achieved in the cyclization of 5c with (R)-2-Sc. The reactions show apparently zero-order rate dependence on substrate concentration and first-order rate dependence on catalyst concentration, but rates depend on total amine concentrations. Activation parameters for the cyclization of pent-4-enylamine using (R)-2-Y (deltaH(S)(double dagger) = 57.4(0.8) kJ mol(-1) and deltaS(S)(double dagger) = -102(3) J K(-1) mol(-1); deltaH(R)(double dagger) = 61.5(0.7) kJ mol(-1) and deltaS(R)(double dagger) = -103(3) J K(-1) mol(-1)) indicate a highly organized transition state. The binaphtholate catalysts were also applied to the kinetic resolution of chiral alpha-substituted aminoalkenes with resolution factors f of up to 19. The 2,5-disubstituted aminopentenes were formed in 7:1 to > or = 50:1 trans diastereoselectivity, depending on the size of the alpha-substituent of the aminoalkene. Rate studies with (S)-1-phenyl-pent-4-enylamine ((S)-15e) gave the activation parameters for the matching (deltaH(double dagger) = 52.2(2.8) kJ mol(-1), deltaS(double dagger) = -127(8) J K(-1) mol(-1) using (S)-2-Y) and mismatching (deltaH(double dagger) = 57.7(1.3) kJ mol(-1), deltaS(double dagger) = -126(4) J K(-1) mol(-1) using (R)-2-Y) substrate/catalyst combination. The absolute configuration of the Mosher amide of (2S)-2-methyl-4,4-diphenyl-pyrrolidine and (2R)-methyl-(5S)-phenyl-pyrrolidinium chloride, prepared from (S)-15e, were determined by crystallographic analysis. Catalyst (R)-4a showed activity in the anti-Markovnikov addition of n-propylamine to styrene.     

Kinetics, mechanism, and computational studies of rhenium-catalyzed desulfurization reactions of thiiranes (thioepoxides)

The oxorhenium(V) dimer {MeReO(edt)}2 (1; where edt = 1,2-ethanedithiolate) catalyzes S atom transfer from thiiranes to triarylphosphines and triarylarsines. Despite the fact that phosphines are more nucleophilic than arsines, phosphines are less effective because they rapidly convert the dimer catalyst to the much less reactive catalyst [MeReO(edt)(PAr3)] (2). With AsAr3, which does not yield the monomer, the rate law is given by v = k[thiirane][1], independent of the arsine concentration. The values of k at 25.0 degrees C in CDCl3 are 5.58 +/- 0.08 L mol(-1) s(-1) for cyclohexene sulfide and ca. 2 L mol(-1) s(-1) for propylene sulfide. The activation parameters for cyclohexene sulfide are deltaH(double dagger) = 10.0 +/- 0.9 kcal mol(-1) and deltaS(double dagger) = -21 +/- 3 cal K(-1) mol(-1). Arsine enters the catalytic cycle after the rate-controlling release of alkene, undergoing a reaction with the Re(VII)(O)(S) intermediate that is so rapid in comparison that it cannot be studied directly. The use of a kinetic competition method provided relative rate constants and a Hammett reaction constant, rho = -1.0. Computations showed that there is little thermodynamic selectivity for arsine attack at O or S of the intermediate. There is, however, a large kinetic selectivity in favor of Ar3AsS formation: the calculated values of deltaH(double dagger) for attack of AsAr3 at Re=O vs Re=S in Re(VII)(O)(S) are 23.2 and 1.1 kcal mol(-1), respectively.     

Platinum(II) and palladium(II) complexes of bisphosphine ligands bearing o-N,N-dimethylanilinyl substituents: a hint of catalytic olefin hydration

Platinum(II) and palladium(II) complexes of the potentially hexadentate P,N-donor ligand family Ar2P-X-PAr2 (X = (CH2)2 [dmape], cyclic-C5H8 [dmapcp]; Ar = o-N,N-dimethylanilinyl) are described. In CH2Cl2, the dmape complexes exist as equilibrium mixtures of MCl2(P,P'-dmape) and [MCl(P,P',N-dmape)]Cl isomers (M = Pd, Pt), governed by deltaH(o) = -19 +/- 4 kJ mol(-1) and deltaS(o) = -100 +/- 30 J mol(-1) K(-1) for M = Pt, and deltaH(o) = -11 +/- 7 kJ mol(-1) and deltaS(o) = -60 +/- 20 J mol(-1) K(-1) for M = Pd. The water-soluble dmapcp complexes exist solely in the [MCl(P,P',N-dmapcp)]Cl form, but the free and coordinated anilinyl rings in these complexes are in slow diastereoselective exchange. X-ray crystal structures for MCl2(P,P'-dmape) (M = Pd, Pt), and the [PdCl(P,P',N-dmape)]+ and [PtCl(P,P',N-dmapcp)]+ cations, are presented. Some of the complexes show marginal activity in water for the catalyzed hydration of maleic to malic acid, giving about 6-7% conversion in 24 h at 100 degrees C and substrate:catalyst loadings of 100:1. Attempts to synthesize a PdCl(P,P',N-dmapm)+ species led instead to isolation of [Pd(mu-Cl)(P,P'-dmapm)]2[PF6]2 (dmapm = Ar2PCH2Ar2).