Rhodium-103 NMR of [Rh(X)(PPh3)3] [X = Cl, N3, NCO, NCS, N(CN)2, NCBPh3, CNBPh3, CN] and derivatives containing CO, isocyanide, pyridine, H2 and O2. Ligand, solvent and temperature effects

Rhodium-103 chemical shifts are reported for 62 compounds, namely [Rh(X)(PPh3)3] [X = Cl, N3, NCO, NCS, N(CN)2, NCBPh3, CNBPh3, CN] and derivatives formed by replacement of a phosphine by CO, xylyl isocyanide (XNC) and pyridine and/or by oxidative addition of H2 or O2 to give trans-[Rh(X)(PPh3)2(CO)] (delta in the range -816 to -368 ppm) trans-[Rh(X)(PPh3)2(XNC)] (delta -817 to -250 ppm), cis-[Rh(X)(PPh3)2(py)] (the trans isomer is formed with X = CN, CNBPh3) (delta -233 to 170 ppm), [Rh(X)(H)2(PPh3)3] (delta -611 to 119), trans-[Rh(X)(H)2(PPh3)2(py)] (delta -30 to 566 ppm), [Rh(X)(O2)(PPh3)3] (delta 1393 to 3273 ppm) and cis-[Rh(X)(O2)(PPh3)2(py)] (delta 1949 to 3374 ppm). For the majority of these compounds data were obtained from solutions in chloroform and in toluene at temperatures of 247 and 300 K; for [Rh(X)(PPh3)3] (delta -562 to -4 ppm) data are reported at a number of temperatures in the range 195-300 K for solutions in chloroform, toluene and dichloromethane and at 300 K for solutions in DMSO. The expected trend to lower delta(103Rh) with decreasing temperature (vibrational shielding) is observed for the dichloromethane data, but data from solutions {of [Rh(X)(PPh3)3]} in chloroform and toluene show a number of features which diverge from this pattern, i.e. shifts to higher delta are found to accompany a decrease in temperature, most noticeably where X = CN and Cl [on changing the solvent from dichloromethane to chloroform changes in delta(103Rh) of up to 172 ppm are observed]. These results are interpreted in terms of a hydrogen-bonded interaction with the solvent that is enhanced by the presence of a polarizable ligand (CN, Cl). With a ligand (O2CCF3) that is only weakly polarizable the solvent dependence of delta(103Rh) is minimal.     

The bridging function of an apparently nonbridging ligand: dinuclear rhodium complexes with Rh(mu-SbR3)Rh as a molecular unit

Novel dinuclear rhodium complexes of the general composition [Rh2Cl2(mu-CRR')2(mu-SbiPr3)] (4-6) were prepared by thermolysis of the mononuclear precursors trans-[RhCl(=CRR')(SbiPr3)2] in excellent yield. The X-ray crystal structure analysis of 4 (R = R' = Ph) confirms the symmetrical bridging position of the stibane ligand. Related compounds [Rh2Cl2(mu-CPh2)(mu-CRR')(mu-SbiPr3)] (7, 8) with two different carbene units were obtained either from trans-[RhCl(=CPh2)(SbiPr3)2] (1) and RR'CN2 or by a conproportionation of 4 and 5 (R = R' = p-Tol) or 4 and 6 (R= Ph, R' = p-Tol), respectively. While CO reacts with 4 to give the polymeric product [[RhCl(CPh2)(CO)]n] (9), tert-butyl isocyanide replaces the bridging stibane and yields [Rh2Cl2(mu-CPh2)2(mu-CNtBu)] (10). The reaction of 4 with tertiary phosphanes PR3 leads to complete bridge cleavage and affords the mononuclear compounds trans-[RhCl(=CPh2)(PR3)2] (11-15). In contrast, treatment of 4 with SbMe3 and SbEt3 yields the related triply bridged complexes [Rh2Cl2(mu-CPh2)2(mu-SbR3)] (16, 17) by substitution of SbiPr3 for the smaller stibanes. The displacement of the chloro ligands in 4-6 and 10 by n5-cyclopentadienyl gives the dinuclear complexes [(n5-C5H5)2Rh2(mu-CRR')2] (18-20) and [(n5-C5H5)2Rh2(mu-CPh2)2(mu-CNtBu)] (21), of which 18 (R = R' = Ph) was characterized crystallographically.     

Unprecedented chemical transformation of semicarbazones mediated by Wilkinson's catalyst

para-Nitrobenzaldehyde semicarbazone undergoes an unusual chemical transformation upon reaction with [Rh(PPh(3))(3)Cl] in the presence of trialkyl and dialkylamines (NR(2)R'; R = Et,(i)Pr, (n)Bu; R' = H or R' = R) via dissociation of the C-NH(2) bond and formation of a new C-NR(2) bond (where the NR(2) fragment is provided by the amine). The transformed semicarbazone ligand binds to rhodium as a dianionic C,N,O-donor to afford complexes of type [Rh(PPh(3))(2)(CNO-NR(2))Cl] (CNO-NR(2) = the coordinated semicarbazone ligand). Another group of semicarbazones (viz. salicylaldehyde semicarbazone, 2-hydroxyacetophenone semicarbazone, and 2-hydroxynaphthaldehyde semicarbazone) has also been observed to undergo a similar chemical transformation upon reaction with [Rh(PPh(3))(3)Cl] under similar experimental conditions as before, and these transformed semicarbazones bind to rhodium as dianionic O,N,O-donors affording complexes of the type [Rh(PPh(3))(2)(ONO(n)-NR(2))Cl] (ONO(n)-NR(2) = the coordinated semicarbazone ligand; n = 1-3). The structure of the [Rh(PPh(3))(2)(CNO-NEt(2))Cl] and [Rh(PPh(3))(2)(ONO(2)-NR(2))Cl] complexes has been determined. All the complexes show characteristic (1)H NMR signals. They also show intense absorptions in the visible and ultraviolet region. Cyclic voltammetry on the complexes shows an oxidative response within 0.52-0.97 V versus SCE and a reductive response within -1.00 to -1.27 V versus SCE, where both the responses are believed to be centered on the semicarbazone ligand.     

Synthesis and crystal structure of uranium(IV) complexes with calix[n]arenes (n = 4, 6 and 8): mononuclear, polynuclear and 1D polymeric species

Reactions of UCl4 with calix[n]arenes (n = 4, 6) in THF gave the mononuclear [UCl2(calix[4]arene - 2H)(THF)2].2THF (.2THF) and the bis-dinuclear [U2Cl2(calix[6]arene - 6H)(THF)3]2.6THF (.6THF) complexes, respectively, while the mono-, di- and trinuclear compounds [Hpy]2[UCl3(calix[4]arene - 3H)].py (.py), [Hpy](4)[U2Cl6(calix[6]arene - 6H)].3py (.3py), [Hpy]3[U2Cl5(calix[6]arene - 6H)(py)].py (.py) and [Hpy]6[U3Cl11(calix[8]arene - 7H)].3py (.3py) were obtained by treatment of UCl4 with calix[n]arenes (n = 4, 6, 8) in pyridine. The sodium salt of calix[8]arene reacted with UCl4 to give the pentanuclear complex [U{U2Cl3(calix[8]arene - 7H)(py)5}2].8py (.8py). Reaction of U(acac)4 (acac = MeCOCHCOMe) with calix[4]arene in pyridine afforded the mononuclear complex [U(acac)2(calix[4]arene - 2H)].4py (.4py) and its treatment with the sodium salt of calix[8]arene led to the formation of the 1D polymer [U2(acac)6(calix[8]arene - 6H)(py)4Na4]n. The sandwich complex [Hpy]2[U(calix[4]arene - 3H)2][OTf].4py (.4py) was obtained by treatment of U(OTf)4 (OTf = OSO2CF3) with calix[4]arene in pyridine. All the complexes have been characterized by X-ray diffraction analysis.     

One-electron versus two-electron mechanisms in the oxidative addition reactions of chloroalkanes to amido-bridged rhodium complexes

The compound syn-[{Rh(mu-NH{p-tolyl})(CNtBu)(2)}(2)] (1) oxidatively adds C--Cl bonds of alkyl chlorides (RCl) and dichloromethane to each metal centre to give the cationic complexes syn-[{Rh(mu-NH{p-tolyl})(eta(1)-R)(CNtBu)(2)}(2)(mu-Cl)]Cl and anti-[{Rh(mu-NH{p-tolyl})Cl(CNtBu)(2)}(2)(mu-CH(2))]. Reaction of 1 with the chiral alkyl chloride (-)-(S)-ClCH(Me)CO(2)Me (R*Cl) gave [{Rh(mu-NH{p-tolyl})(eta(1)-R*)(CNtBu)(2)}(2)(mu-Cl)]Cl ([3]Cl) as an equimolecular mixture of the meso form (R,S)-[3]Cl-C(s) and one enantiomer of the chiral form [3]Cl-C(2). This reaction, which takes place in two steps, was modeled step-by-step by reacting the mixed-ligand complex syn-[(cod)Rh(mu-NH{p-tolyl})(2)Rh(CNtBu)(2)] (4) with R*Cl, as a replica of the first step, to give [(cod)Rh(mu-NH{p-tolyl})(2)RhCl(eta(1)-R*)(CNtBu)(2)] (5) with racemization of the chiral carbon. Further treatment of 5 with CNtBu to give the intermediate [(CNtBu)(2)Rh(mu-NH{p-tolyl})(2)RhCl(eta(1)-R*)(CNtBu)(2)], followed by reaction with R*Cl reproduced the regioselectivity of the second step to give (R,S)-[3]Cl-C(s) and [3]Cl-C(2) in a 1:1 molar ratio. Support for an S(N)2 type of reaction with inversion of the configuration in the second step was obtained from a similar sequence of reactions of 4 with ClCH(2)CO(2)Me first, then with CNtBu, and finally with R*Cl to give [(CNtBu)(2)(eta(1)-CH(2)R)Rh(mu-NH{p-tolyl})(2)(mu-Cl)Rh(eta(1)-R*)(CNtBu)(2)]Cl (R = CO(2)Me, [7]Cl) as a single enantiomer with the R configuration at the chiral carbon. The reactions of 1 with (+)-(S)-XCH(2)CH(CH(3))CH(2)CH(3) (X = Br, I) gave the related complexes [{Rh(mu-NH{p-tolyl})(eta(1)-CH(2)CH(CH(3))CH(2)CH(3))(CNtBu)(2)}(2)(mu-X)]X, probably by following an S(N)2 profile in both steps.     

Cationic and neutral diphenyldiazomethanerhodium(I) complexes as catalytically active species in the C-C coupling reaction of olefins and diphenyldiazomethane

Cationic rhodium(I) complexes cis-[Rh(acetone)2(L)(L')]+ (2: L = L'=C8H14; 3: L=C8H14; L'=PiPr3; 4: L=L'=PiPr3), prepared from [RhCl(C8H14)2]2] and isolated as PF6 salts, catalyze the C-C coupling reaction of diphenyldiazomethane with ethene, propene, and styrene. In most cases, a mixture of isomeric olefins and cyclopropanes were obtained which are formally built up by one equivalent of RCH=CH2 (R = H, Me, Ph) and one equivalent of CPh2. The efficiency and selectivity of the catalyst depends significantly on the coordination sphere around the rhodium(I) center. Treatment of 4 with Ph2CN2 in the molar ratio of 1:1 and 1:2 gave the complexes trans-[Rh(PiPr3)2(acetone)(eta1-N2CPh2)]PF6 (8) and trans-[Rh(PiPr3)2(eta1-N2CPh2)2]PF6 (9), of which 8 was characterized by X-ray crystallography. Since 8 and 9 not only react with ethene but also catalyze the reaction of C2H4 and free Ph2CN2, they can be regarded as intermediates (possibly resting states) in the C-C coupling process. The lability of 8 and 9 is illustrated by the reactions with pyridine and NaX (X=Cl, Br, I, N3) which afford the mono(diphenyldiazomethane)rhodium(I) compounds trans-[Rh(PiPr3)2(py)(eta1-N2CPh2)]PF6 (10) and trans-[RhX(eta1-N2CPh2)(PiPr3)2] (11-14), respectively. The catalytic activity of the neutral complexes 11 - 14 is somewhat less than that of the cationic species 8, 9 and decreases in the order Cl > Br> I > N3.     

Synthesis, structure, and reactivity of ruthenium carboxylato and 2-oxocarboxylato complexes bearing the bis(3,5-dimethylpyrazol-1-yl)acetato ligand

A series of ruthenium(II) acetonitrile, pyridine (py), carbonyl, SO2, and nitrosyl complexes [Ru(bdmpza)(O2CR)(L)(PPh3)] (L = NCMe, py, CO, SO2) and [Ru(bdmpza)(O2CR)(L)(PPh3)]BF4 (L = NO) containing the bis(3,5-dimethylpyrazol-1-yl)acetato (bdmpza) ligand, a N,N,O heteroscorpionate ligand, have been prepared. Starting from ruthenium chlorido, carboxylato, or 2-oxocarboxylato complexes, a variety of acetonitrile complexes [Ru(bdmpza)Cl(NCMe)(PPh3)] (4) and [Ru(bdmpza)(O2CR)(NCMe)(PPh3)] (R = Me (5a), R = Ph (5b)), as well as the pyridine complexes [Ru(bdmpza)Cl(PPh3)(py)] (6) and [Ru(bdmpza)(O2CR)(PPh3)(py)] (R = Me (7a), R = Ph (7b), R = (CO)Me (8a), R = (CO)Et (8b), R = (CO)Ph) (8c)), have been synthesized. Treatment of various carboxylato complexes [Ru(bdmpza)(O2CR)(PPh3)2] (R = Me (2a), Ph (2b)) with CO afforded carbonyl complexes [Ru(bdmpza)(O2CR)(CO)(PPh3)] (9a, 9b). In the same way, the corresponding sulfur dioxide complexes [Ru(bdmpza)(O2CMe)(PPh3)(SO2)] (10a) and [Ru(bdmpza)(O2CPh)(PPh3)(SO2)] (10b) were formed in a reaction of the carboxylato complexes with gaseous SO2. None of the 2-oxocarboxylato complexes [Ru(bdmpza)(O2C(CO)R)(PPh3)2] (R = Me (3a), Et (3b), Ph (3c)) showed any reactivity toward CO or SO2, whereas the nitrosyl complex cations [Ru(bdmpza)(O2CMe)(NO)(PPh3)](+) (11) and [Ru(bdmpza)(O2C(CO)Ph)(NO)(PPh3)](+) (12) were formed in a reaction of the acetato 2a or the benzoylformato complex 3c with an excess of nitric oxide. Similar cationic carboxylato nitrosyl complexes [Ru(bdmpza)(O2CR)(NO)(PPh3)]BF4 (R = Me (13a), R = Ph (13b)) and 2-oxocarboxylato nitrosyl complexes [Ru(bdmpza)(O2C(CO)R)(NO)(PPh3)]BF4 (R = Me (14a), R = Et (14b), R = Ph (14c)) are also accessible via a reaction with NO[BF4]. X-ray crystal structures of the chlorido acetonitrile complex [Ru(bdmpza)Cl(NCMe)(PPh3)] (4), the pyridine complexes [Ru(bdmpza)(O2CMe)(PPh3)(py)] (7a) and [Ru(bdmpza)(O2CC(O)Et)(PPh3)(py)] (8b), the carbonyl complex [Ru(bdmpza)(O2CPh)(CO)(PPh3)] (9b), the sulfur dioxide complex [Ru(bdmpza)(O2CPh)(PPh3)(SO2)] (10b), as well as the nitrosyl complex [Ru(bdmpza)(O2C(CO)Me)(NO)(PPh3)]BF4 (14a), are reported. The molecular structure of the sulfur dioxide complex [Ru(bdmpza)(O2CPh)(PPh3)(SO2)] (10b) revealed a rather unusual intramolecular SO2-O2CPh Lewis acid-base adduct.     

Titanium and niobium imido complexes stabilized by heteroscorpionate ligands

The reaction of [Ti(NR)Cl(2)(py)(3)](R = (t)Bu, p-tolyl, 2,6-C(6)H(3)(i)Pr(2)) with [{Li(bdmpza)(H(2)O)}(4)][bdmpza = bis(3,5-dimethylpyrazol-1-yl)acetate] and [{Li(bdmpzdta)(H(2)O)}(4)][bdmpzdta = bis(3,5-dimethylpyrazol-1-yl)dithioacetate] affords the corresponding complexes [Ti(NR)Cl(kappa(3)-bdmpzx)(py)](x = a, R = (t)Bu 1, p-tolyl 2, 2,6-C(6)H(3)(i)Pr(2) 3; x = dta, R =(t)Bu 4, p-tolyl , 2,6-C(6)H(3)(i)Pr(2) 6), which are the first examples of imido Group 4 complexes stabilized by heteroscorpionate ligands. The solid-state X-ray crystal structure of 1 has been determined. The titanium centre is six-coordinate with three fac-sites occupied by the heteroscorpionate ligand and the remainder of the coordination sphere being completed by chloride, imido and pyridine ligands. The complexes are 1-6 fluxional at room temperature. The pyridine ortho- and meta-proton resonances show evidence of dynamic behaviour for this ligand and variable-temperature NMR studies were carried out in order to study their dynamic behaviour in solution. The complexes [Nb(NR)Cl(3)(py)(2)](R = (t)Bu, p-tolyl, 2,6-C(6)H(3)(i)Pr(2)) reacted with [{Li(bdmpza)(H(2)O)}(4)] and (Hbdmpze)[bdmpze = 2,2-bis(3,5-dimethylpyrazol-1-yl)ethoxide], the latter with prior addition of (n)BuLi, to give the complexes [Nb(NR)Cl(2)(kappa(3)-bdmpzx)](x = a, R =(t)Bu 7, p-tolyl 8, 2,6-C(6)H(3)(i)Pr(2) 9; x = e, R = (t)Bu 10, p-tolyl 11, 2,6-C(6)H(3)(i)Pr(2)) 12 and these are the first examples of imido Group 5 complexes with heteroscorpionate ligands. The structures of these complexes have been determined by spectroscopic methods.     

Synthesis, structural characterization, and ligand replacement reactions of gem-dithiolato-bridged rhodium and iridium complexes

The reaction of gem-dithiol compounds R 2C(SH) 2 (R = Bn (benzyl), (i) Pr; R 2 = -(CH 2) 4-) with dinuclear rhodium or iridium complexes containing basic ligands such as [M(mu-OH)(cod)] 2 and [M(mu-OMe)(cod)] 2, or the mononuclear [M(acac)(cod)] (M = Rh, Ir, cod = 1,5-cyclooctadiene) in the presence of a external base, afforded the dinuclear complexes [M 2(mu-S 2CR 2)(cod) 2] ( 1- 4). The monodeprotonation of 1,1-dimercaptocyclopentane gave the mononuclear complex [Rh(HS 2Cptn)(cod)] ( 5) that is a precursor for the dinuclear compound [Rh 2(mu-S 2Cptn)(cod) 2] ( 6). Carbonylation of the diolefin compounds gave the complexes [Rh 2(mu-S 2CR 2)(CO) 4] ( 7- 9), which reacted with P-donor ligands to stereoselectively produce the trans isomer of the disubstituted complexes [Rh 2(mu-S 2CR 2)(CO) 2(PR' 3) 2] (R' = Ph, Cy (cyclohexyl)) ( 10- 13) and [Rh 2(mu-S 2CBn 2)(CO) 2{P(OR') 3} 2] (R' = Me, Ph) ( 14- 15). The substitution process in [Rh 2(mu-S 2CBn 2)(CO) 4] ( 7) by P(OMe) 3 has been studied by spectroscopic means and the full series of substituted complexes [Rh 2(mu-S 2CBn 2)(CO) 4- n {P(OR) 3} n ] ( n = 1, 4) has been identified in solution. The cis complex [Rh 2(mu-S 2CBn 2)(CO) 2(mu-dppb)] ( 16) was obtained by reaction of 7 with the diphosphine dppb (1,4-bis(diphenylphosphino)butane). The molecular structures of the diolefinic dinuclear complexes [Rh 2(mu-S 2CR 2)(cod) 2] (R = Bn ( 1), (i) Pr ( 2); R 2 = -(CH 2) 4- ( 6)) and that of the cis complex 16 have been studied by X-ray diffraction.     

Selective low-temperature syntheses of facial and meridional tris-cyclometalated iridium(III) complexes

We have developed a selective low-temperature synthesis of fac and mer tris-cyclometalated Ir(III) complexes. The chloro-bridged dimers [Ir(CwedgeN)2Cl]2 (CwedgeN = cyclometalating ligand) are cleaved in coordinating solvents like acetonitrile to give neutral Ir(CwedgeN)2(NCCH3)Cl species which in turn are reacted with AgPF6 to give hexafluorophosphate salts of the bis-acetonitrile species [Ir(CwedgeN)2(NCCH3)2]PF6 for CwedgeN = 2,2'-thienylpyridine (thpy) and 2-phenylpyridine (ppy). These bis-acetonitrile complexes are excellent starting materials for the synthesis of tris-Ir(III) complexes. The complexes of the general formula fac-Ir(CwedgeN)3 were synthesized with the ligands thpy and ppy at 100 degrees C in o-dichlorobenzene from the corresponding [Ir(CwedgeN)2(NCCH3)2]PF6 complexes. The reaction of [Ir(CwedgeN)2(NCCH3)2]PF6 with thpy at room temperature did not give the expected tris complex but instead gave [Ir(thpy)2(N,S-thpy)]PF6, with the third chelating ligand complexed through the sulfur atom of the thiophene ring. [Ir(thpy)2Cl]2, [Ir(ppy)2Cl]2, Ir(thpy)2(NCCH3)Cl, [Ir(thpy)2(NCCH3)2]PF6, [Ir(ppy)2(NCCH3)2]PF6, and [Ir(thpy)2(N,S-thpy)]PF6 were structurally characterized by X-ray crystallography. Additionally, hydroxy-bridged dimers, [Ir(CwedgeN)2(OH)]2, were synthesized as starting materials for the selective synthesis of mer-Ir(CwedgeN)3 complexes at 100 degrees C in o-dichlorobenzene. A mechanism is proposed that may account for the selectivity observed in the formation of the mer-Ir(CwedgeN)3 and fac-Ir(CwedgeN)3 isomers in previous studies and the studies presented here.     

Synthesis and characterization of ethylbis(2-pyridylethyl)amineruthenium complexes and two different types of C-H bond cleavage at an ethylene arm

Ruthenium complexes bearing ethylbis(2-pyridylethyl)amine (ebpea), which has flexible -C(2)H(4)- arms between the amine and the pyridyl groups and coordinates to a metal center in facial and meridional modes, have been synthesized and characterized. Three trichloro complexes, fac-[Ru(III)Cl(3)(ebpea)] (fac-[1]), mer-[Ru(III)Cl(3)(ebpea)] (mer-[1]), and mer-[Ru(II)Cl(3){η(2)-N(C(2)H(5))(C(2)H(4)py)═CH-CH(2)py}] (mer-[2]), were synthesized using the Ru blue solution. Formation of mer-[2] proceeded via a C-H activation of the CH(2) group next to the amine nitrogen atom of the ethylene arm. Reduction reactions of fac- and mer-[1] afforded a triacetonitrile complex mer-[Ru(II)(CH(3)CN)(3)(ebpea)](PF(6))(2) (mer-[3](PF(6))(2)). Five nitrosyl complexes fac-[RuX(2)(NO)(ebpea)]PF(6) (X = Cl for fac-[4]PF(6); X = ONO(2) for fac-[5]PF(6)) and mer-[RuXY(NO)(ebpea)]PF(6) (X = Cl, Y = Cl for mer-[4]PF(6); X = Cl, Y = CH(3)O for mer-[6]PF(6); X = Cl, Y = OH for mer-[7]PF(6)) were synthesized and characterized by X-ray crystallography. A reaction of mer-[2] in H(2)O-C(2)H(5)OH at room temperature afforded mer-[1]. Oxidation of C(2)H(5)OH in H(2)O-C(2)H(5)OH and i-C(3)H(7)OH in H(2)O-i-C(3)H(7)OH to acetaldehyde and acetone by mer-[2] under stirring at room temperature occurred with formation of mer-[1]. Alternative C-H activation of the CH(2) group occurred next to the pyridyl group, and formation of a C-N bond between the CH moiety and the nitrosyl ligand afforded a nitroso complex [Ru(II)(N(3))(2){N(O)CH(py)CH(2)N(C(2)H(5))C(2)H(4)py}] ([8]) in reactions of nitrosyl complexes with sodium azide in methanol, and reaction of [8] with hydrochloric acid afforded a corresponding chloronitroso complex [Ru(II)Cl(2){N(O)CH(py)CH(2)N(C(2)H(5))C(2)H(4)py}] ([9]).     

Synthesis and reactivity of iridium complexes with pyridine and piperidine ligands: models for hydrodenitrogenation

The complexes [Ir(H)2(eta1-N-L)2(PPh3)2]PF6, L = py (1), iQ (2) and pip (3) (py = pyridine, iQ = isoquinoline, pip = piperidine) have been synthesized in high yields by hydrogenation of [Ir(cod)(PPh3)2]PF6 in the presence of the appropriate nitrogen compound. When hydrogen is bubbled through 1,2-dichloroethane solutions of 1 or 2, two new species were formed in each case by C-Cl bond activation of the solvent, Ir(H)2Cl(eta1-N-L)(PPh3)2 (L = py, 4; iQ, 5) and IrH(Cl)2(eta1-N-L)(PPh3)2 (L = py, 6; iQ, 7). Reaction of 3 with py or iQ yielded complexes 1 and 2, respectively, while under a slow stream of carbon monoxide the complex [Ir(H)2(eta1-N-pip)(CO)(PPh3)2]PF6 (8) was produced. Complex 3 also reacts with halide and 4-bromothiophenolate anions leading to the corresponding neutral species Ir(H)2(X)(eta1-N-pip)(PPh3)2, X = Cl (9), I (10) and 4-BrC6H4S (11), or with [MoS4]2- to yield the hetero-bimetallic complex [Ir(H)(PPh3)2(mu-S)2MoS2]- (13). All the new complexes were characterized by analytical and spectroscopic methods. The X-ray structures of , 2 and 8 consist of distorted octahedra with a mutually cis disposition of the two hydrides and mutually trans phosphines. Complexes 1, 2 and 3 and their derivatives are of interest as models for the chemisorption step in hydrodenitrogenation reactions on solid catalysts.     

Dihydrogen complexes of rhodium: [RhH2(H2)x (PR3)2]+ (R = Cy, iPr; x = 1, 2)

Addition of H2 (4 atm at 298 K) to [Rh(nbd)(PR3)2][BAr(F)4] [R = Cy, iPr] affords Rh(III) dihydride/dihydrogen complexes. For R = Cy, complex 1a results, which has been shown by low-temperature NMR experiments to be the bis-dihydrogen/bis-hydride complex [Rh(H)2(eta2-H2)2(PCy3)2][BAr(F)4]. An X-ray diffraction study on 1a confirmed the {Rh(PCy3)2} core structure, but due to a poor data set, the hydrogen ligands were not located. DFT calculations at the B3LYP/DZVP level support the formulation as a Rh(III) dihydride/dihydrogen complex with cis hydride ligands. For R = iPr, the equivalent species, [Rh(H)2(eta2-H2)2(P iPr3)2][BAr(F)4] 2a, is formed, along with another complex that was spectroscopically identified as the mono-dihydrogen, bis-hydride solvent complex [Rh(H)2(eta2-H2)(CD2Cl2)(P iPr3)2][BAr(F)4] 2b. The analogous complex with PCy3 ligands, [Rh(H)2(eta2-H2)(CD2Cl2)(PCy3)2][BAr(F)4] 1b, can be observed by reducing the H2 pressure to 2 atm (at 298 K). Under vacuum, the dihydrogen ligands are lost in these complexes to form the spectroscopically characterized species, tentatively identified as the bis hydrides [Rh(H)2(L)2(PR3)2][BAr(F)4] (1c R = Cy; 2c R = iPr; L = CD2Cl2 or agostic interaction). Exposure of 1c or 2c to a H2 atmosphere regenerates the dihydrogen/bis-hydride complexes, while adding acetonitrile affords the bis-hydride MeCN adduct complexes [Rh(H)2(NCMe)2(PR3)2][BAr(F)4]. The dihydrogen complexes lose [HPR3][BAr(F)4] at or just above ambient temperature, suggested to be by heterolytic splitting of coordinated H2, to ultimately afford the dicationic cluster compounds of the type [Rh6(PR3)6(mu-H)12][BAr(F)4]2 in moderate yield.     

On the reactivity toward ketones of new methyl amino complexes of Rh(III) and Ag(I). Synthesis of ortho-rhodiated acetophenone methyl imine complexes

MeNH(2) reacts with silver salts AgX (2:1) to give [Ag(NH(2)Me)(2)]X [X = TfO = CF(3)SO(3) (1.TfO) and ClO(4) (1.ClO(4))]. Neutral mono(amino) Rh(III) complexes [Rh(Cp*)Cl(2)(NH(2)R)] [R = Me (2a), To = C(6)H(4)Me-4 (2b)] have been prepared by reacting [Rh(Cp*)Cl(mu-Cl)](2) with RNH(2) (1:2). The following cationic methyl amino complexes have also been prepared: [Rh(Cp*)Cl(NH(2)Me)(PPh(3))]TfO (3.TfO), from [Rh(Cp*)Cl(2)(PPh(3))] and 1.TfO (1:1); [Rh(Cp*)Cl(NH(2)R)2]X, where R = Me, X = Cl, (4a.Cl), from [Rh(Cp*)Cl(mu-Cl)]2 and MeNH2 (1:4), or R = Me, X = ClO4 (4a.ClO4), from 4a.Cl and NaClO4 (1:4.8), or R = To, X = TfO (4b.TfO), from [Rh(Cp*)Cl(mu-Cl)](2), ToNH(2) and TlTfO (1:4:2); [Rh(Cp*)(NH(2)Me)(tBubpy)](TfO)(2) (tBubpy = 4,4'-di-tert-butyl-2,2'-bipyridine, 5.TfO), from 2a, TlTfO and tBubpy (1:2:1); [Rh(Cp*)(NH(2)Me)(3)](TfO)2 (6.TfO) from [Rh(Cp*)Cl(mu-Cl)](2) and 1.TfO (1:4). 2-6 constitute the first family of methyl amino complexes of rhodium. 1 and 4a.ClO(4) react with acetone to give, respectively, the methyl imino complexes [Ag{N(Me)=CMe(2)}()]X [X = TfO (7.TfO), ClO(4) (7.ClO(4))], and [Rh(Cp*)Cl(Me-imam)]ClO(4) [8.ClO(4), Me-imam = N,N'-N(Me)=C(Me)CH(2)C(Me)(2)NHMe]. 7.X (X = TfO, ClO(4)) are new members of the small family of methyl acetimino complexes of any metal whereas 8.ClO4 results after a double acetone condensation to give the corresponding bis(methyl acetimino) complex and an aldol-like condensation of the two imino ligands. The acetimino complex [Ag(NH=CMe(2))(2)]ClO(4) reacts with [Rh(Cp*)Cl(imam)]ClO(4) [1:1, imam = N,N'-NH=C(Me)CH(2)C(Me)(2)NH(2)] to give [Rh(Cp*)(imam)(NH=CMe(2))](ClO(4))(2) (9a.ClO(4)). 8.ClO(4) reacts with AgClO(4) (1:1) in MeCN to give [Rh(Cp*)(Me-imam)(NCMe)](ClO(4))2 (9b.ClO(4)), which in turn reacts with XyNC (Xy = C(6)H(3)Me(2)-2,6) or with MeNH(2) (1:1) to give [Rh(Cp*)(Me-imam)L](ClO(4))(2) [L = XyNC (9c.ClO(4)), MeNH(2) (9d.ClO(4))]. 6.TfO reacts with acetophenone to give [Rh(Cp*){C,N-C(6)H(4)C(Me)=N(Me)-2}(NH(2)Me)]TfO (10a.TfO), the first complex resulting from such a condensation and cyclometalation reaction. In turn, 10a.TfO reacts with isocyanides RNC (1:1) at room temperature to give [Rh(Cp*){C,N-C(6)H(4)C(Me)=NMe-2}(CNR)]TfO [R = tBu (10b.TfO), Xy (10c.TfO)], or 1:12 at 60 degrees C to give [Rh(Cp*){C,N-C(=NXy)C(6)H(4)C(Me)=N(Me)-2}(CNXy)]TfO (11.TfO). The crystal structures of 9a.ClO(4).acetone-d6, 9c.ClO(4), and 10a.TfO have been determined.     

Dimethylsulfoxide as a ligand for RhI and IrI complexes--isolation, structure, and reactivity towards X-H bonds (X=H, OH, OCH3)

Novel neutral and cationic Rh(I) and Ir(I) complexes that contain only DMSO molecules as dative ligands with S-, O-, and bridging S,O-binding modes were isolated and characterized. The neutral derivatives [RhCl(DMSO)(3)] (1) and [IrCl(DMSO)(3)] (2) were synthesized from the dimeric precursors [M(2)Cl(2)(coe)(4)] (M=Rh, Ir; COE=cyclooctene). The dimeric Ir(I) compound [Ir(2)Cl(2)(DMSO)(4)] (3) was obtained from 2. The first example of a square-planar complex with a bidentate S,O-bridging DMSO ligand, [(coe)(DMSO)Rh(micro-Cl)(micro-DMSO)RhCl(DMSO)] (4), was obtained by treating [Rh(2)Cl(2)(coe)(4)] with three equivalents of DMSO. The mixed DMSO-olefin complex [IrCl(cod)(DMSO)] (5, COD=cyclooctadiene) was generated from [Ir(2)Cl(2)(cod)(2)]. Substitution reactions of these neutral systems afforded the complexes [RhCl(py)(DMSO)(2)] (6), [IrCl(py)(DMSO)(2)] (7), [IrCl(iPr(3)P)(DMSO)(2)] (8), [RhCl(dmbpy)(DMSO)] (9, dmbpy=4,4'-dimethyl-2,2'-bipyridine), and [IrCl(dmbpy)(DMSO)] (10). The cationic O-bound complex [Rh(cod)(DMSO)(2)]BF(4) (11) was synthesized from [Rh(cod)(2)]BF(4). Treatment of the cationic complexes [M(coe)(2)(O=CMe(2))(2)]PF(6) (M=Rh, Ir) with DMSO gave the mixed S- and O-bound DMSO complexes [M(DMSO)(2)(DMSO)(2)]PF(6) (Rh=12; Ir=in situ characterization). Substitution of the O-bound DMSO ligands with dmbpy or pyridine resulted in the isolation of [Rh(dmbpy)(DMSO)(2)]PF(6) (13) and [Ir(py)(2)(DMSO)(2)]PF(6) (14). Oxidative addition of hydrogen to [IrCl(DMSO)(3)] (2) gave the kinetic product fac-[Ir(H)(2)Cl(DMSO)(3)] (15) which was then easily converted to the more thermodynamically stable product mer-[Ir(H)(2)Cl(DMSO)(3)] (16). Oxidative addition of water to both neutral and cationic Ir(I) DMSO complexes gave the corresponding hydrido-hydroxo addition products syn-[(DMSO)(2)HIr(micro-OH)(2)(micro-Cl)IrH(DMSO)(2)][IrCl(2)(DMSO)(2)] (17) and anti-[(DMSO)(2)(DMSO)HIr(micro-OH)(2)IrH(DMSO)(2)(DMSO)][PF(6)](2) (18). The cationic [Ir(DMSO)(2)(DMSO)(2)]PF(6) complex (formed in situ from [Ir(coe)(2)(O=CMe(2))(2)]PF(6)) also reacts with methanol to give the hydrido-alkoxo complex syn-[(DMSO)(2)HIr(micro-OCH(3))(3)IrH(DMSO)(2)]PF(6) (19). Complexes 1, 2, 4, 5, 11, 12, 14, 17, 18, and 19 were characterized by crystallography.     

Influence of ligand polarizability on the reversible binding of O2 by trans-[Rh(X)(XNC)(PPh3)2] (X = Cl, Br, SC6F5, C2Ph; XNC = xylyl isocyanide). Structures and a kinetic study

The complexes trans-[Rh(X)(XNC)(PPh 3) 2] (X = Cl, 1; Br, 2; SC 6F 5, 3; C 2Ph, 4; XNC = xylyl isocyanide) combine reversibly with molecular oxygen to give [Rh(X)(O 2)(XNC)(PPh 3) 2] of which [Rh(SC 6F 5)(O 2)(XNC)(PPh 3) 2] ( 7) and [Rh(C 2Ph)(O 2)(XNC)(PPh 3) 2] ( 8) are sufficiently stable to be isolated in crystalline form. Complexes 2, 3, 4, and 7 have been structurally characterized. Kinetic data for the dissociation of O 2 from the dioxygen adducts of 1- 4 were obtained using (31)P NMR to monitor changes in the concentration of [Rh(X)(O 2)(XNC)(PPh 3) 2] (X = Cl, Br, SC 6F 5, C 2Ph) resulting from the bubbling of argon through the respective warmed solutions (solvent chlorobenzene). From data recorded at temperatures in the range 30-70 degrees C, activation parameters were obtained as follows: Delta H (++) (kJ mol (-1)): 31.7 +/- 1.6 (X = Cl), 52.1 +/- 4.3 (X = Br), 66.0 +/- 5.8 (X = SC 6F 5), 101.3 +/- 1.8 (X = C 2Ph); Delta S (++) (J K (-1) mol (-1)): -170.3 +/- 5.0 (X = Cl), -120 +/- 13.6 (X = Br), -89 +/- 18.2 (X = SC 6F 5), -6.4 +/- 5.4 (X = C 2Ph). The values of Delta H (++) and Delta S (++) are closely correlated (R (2) = 0.9997), consistent with a common dissociation pathway along which the rate-determining step occurs at a different position for each X. Relative magnitudes of Delta H (++) are interpreted in terms of differing polarizabilities of ligands X.     

Macrocycle-supported titanium complexes with chelating imido ligands: analogues of ansa-metallocenes

Reactions of 1,4-dimethyl-1,4,7-triazacyclononane (L1a) and 1,4-diisopropyl-1,4,7-triazacyclononane (L1b) to form 1-aminopropyl-4,7-di-R-1,4,7-triazacyclononane [R = Me (H2L3a) or Pri (H2L3b)] and 1-(2-aminobenzyl)-4,7-di-R-1,4,7-triazacyclononane [R = Me (H2L5a) or Pri (H2L5b)] are reported. Reaction of H2L3a and H2L5a with [Ti(NMe2)2Cl2] gives the ansa-linked macrocycle-imido complexes [Ti(kappa 4-L3a)Cl2] (5a) and [Ti(kappa 4-L5a)Cl2] (6a), respectively, and NHMe2. Reaction of H2L3a with [Ti(NBut)Cl2(py)3] gives [Ti(NBut)(kappa 3-H2L3a)Cl2] (7), which possesses a pendant alkylamine group that does not undergo amine/tert-butylimido group exchange to give 5a and ButNH2. However, reaction of H2L3b and H2L5b with [Ti(NBut)Cl2(py)3] does give amine/tert-butylimido group exchange to form [Ti(kappa 4-L3b)Cl2] (5b), [Ti(kappa 4-L5b)Cl2] (8b), and ButNH2. The compounds 5a,b and 6a,b are isolobal analogues of group 4 ansa-metallocene complexes and relatives of titanium cyclopentadienyl-amido constrained geometry olefin polymerization catalysts. Reaction of 5b with AgOTf affords [Ti(kappa 4-L3b)(OTf)Cl] (8) as the major product, the crystal structure of which has been determined. Alkylation of 6b by RLi gives the dialkyl derivatives [Ti(kappa 4-L5b)(R)2] [R = Me (9) or CH2SiMe3 (10)]. The ethylene polymerization capability of the compounds 5a,b, 6a,b, and 10 in the presence of methylaluminoxane has been determined and compared to that of [Ti(NBut)(kappa 3-L1a,b)Cl2] (11a,b); in all instances, low yields of high-molecular-weight polymer are obtained.     

Aluminum complexes of the redox-active [ONO] pincer ligand

A series of aluminum complexes containing the tridentate, redox-active ligand bis(3,5-di-tert-butyl-2-phenol)amine ([ONO]H(3)) in three different oxidation states were synthesized. The aluminum halide salts AlCl(3) and AlBr(3) were reacted with the doubly deprotonated form of the ligand to afford five-coordinate [ONHO(cat)]AlX(solv) complexes (1a, X = Cl, solv = OEt(2); 1b, X = Br, solv = THF), each having a trigonal bipyramidal coordination geometry at the aluminum and containing the [ONHO(cat)](2-) ligand with a protonated, sp(3)-hybridized nitrogen donor. The [ONO] ligand platform may also be added to aluminum through the use of the oxidized ligand salt [ONO(q)]K, which was reacted with AlCl(3) in the presence of either diphenylacetylacetonate (acacPh(2)(-)) or 8-oxyquinoline (quinO(-)) to afford [ONO(q)]Al(acacPh(2))Cl (2) or [ONO(q)]Al(quinO)Cl (3), respectively, with well-defined [ONO(q)](-) ligands. Quinonate complexes 2 and 3 were reduced by one electron to afford the corresponding complexes K{[ONO(sq)]Al(acacPh(2))(py)} (4) and K{[ONO(sq)]Al(quinO)(py)} (5), respectively, containing well-defined [ONO(sq)](2-) ligands. The addition of tetrachloro-1,2-quinone to 1a in the presence of pyridine resulted in the expulsion of HCl and the formation of an aluminum complex with two different redox active ligands, [ONO]Al(o-O(2)C(6)Cl(4))(py) (6). Similar results were obtained when 1a was reacted with 9,10-phenanthrenequinone to afford [ONO]Al(o-O(2)C(14)H(8))(py) (7) or with pyrene-4,5-dione to afford [ONO]Al(o-O(2)C(16)H(8))(py) (8). Structural, spectroscopic and preliminary magnetic measurements on 6-8 suggest ligand non-innocent redox behavior in these complexes.     

Group 5 imido complexes derived from diamido-pyridine ligands

Reaction of the vanadium(V) imide [V(NAr)Cl(3)(THF)] (Ar = 2,6-C(6)H(3)(i)()Pr(2)) with the diamino-pyridine derivative MeC(2-C(5)H(4)N)(CH(2)NHSiMe(2)(t)()Bu)(2) (abbreviated as H(2)N'(2)N(py)) gave modest yields of the vanadium(IV) species [V(NAr)(H(3)N'N' 'N(py))Cl(2)] (1 where H(3)N'N' 'N(py) = MeC(2- C(5)H(4)N)(CH(2)NH(2))(CH(2)NHSiMe(2)(t)()Bu) in which the original H(2)N'(2)N(py) has effectively lost SiMe(2)(t)()Bu (as ClSiMe(2)(t)()Bu) and gained an H atom. Better behaved reactions were found between the heavier Group 5 metal complexes [M(NR)Cl(3)(py)(2)] (M = Nb or Ta, R = (t)()Bu or Ar) and the dilithium salt Li(2)[N(2)N(py)] (where H(2)N(2)N(py) = MeC(2-C(5)H(4)N)(CH(2)NHSiMe(3))(2)), and these yielded the six-coordinate M(V) complexes [M(NR)Cl(N(2)N(py))(py)] (M = Nb, R = (t)()Bu 2; M = Ta, R = (t)()Bu 3 or Ar 4). The compounds 2-4 are fluxional in solution and undergo dynamic exchange processes via the corresponding five-coordinate homologues [M(NR)Cl(N(2)N(py))]. Activation parameters are reported for the complexes 2 and 3. In the case of 2, high vacuum tube sublimation afforded modest quantities of [Nb(N(t)()Bu)Cl(N(2)N(py))] (5). The X-ray crystal structures of the four compounds 1, 2, 3, and 4 are reported.     

Square Planar (SP-4) and Octahedral (OC-6) Complexes of Platinum(II) and -(IV) with Predetermined Chirality at the Metal Center

cis-Bis-homoleptic platinum(II) complexes, with predetermined helical chirality at the metal center, can be obtained by using strongly sterically interacting ligands. With this aim, two new ligands, (8R,10R)-2-(2'-thienyl)-4,5-pinenopyridine, th4,5ppy (2), and (8R,10R)-2-(2'-thienyl)-5,6-pinenopyridine, th5,6ppy (4), were synthesized and coordinated to platinum. The structures of the resulting complexes, Pt(th4,5ppy)(2) (5) and Pt(th5,6ppy)(2) (6), were determined by X-ray diffraction, and it was found that they both crystallize with a Delta-cis configuration. Thermal oxidative additions (TOA) of alkyl halides were performed with both complexes leading, in the case of 5, to a mixture of isomers and, in the case of 6, to isomerically pure products. The predetermination of chirality at the metal center is therefore preserved in the octahedral (OC-6) platinum(IV) complexes. Crystals of Pt(th4,5ppy)(2) (5) are orthorhombic, of space group P2(1)2(1)2(1), with a = 12.973(1) ?, b = 13.619(2) ?, c = 17.665(2) ?, alpha = beta = gamma = 90 degrees, and Z = 4. Final R = 0.0268 and R(w) = 0.0424 for 3101 observed reflections. Crystals of Pt(th5,6ppy)(2) (6) are hexagonal, of space group P6(1), with a = 11.5465(4) ?, b = 11.5465(4) ?, c = 35.356(3) ?, alpha = beta = 90 degrees, gamma = 120 degrees, and Z = 6. Final R = 0.0424 and R(w) = 0.0845 for 2660 observed reflections. Neither molecule possesses a crystallographic C(2) symmetry.