Titrimetric determination of U(iv) alone and in mixtures with V(IV), Mn(II), Ce(III) and Fe(II)

Summary A rapid and accurate method is described for the potentiometric determination of uranium(IV) with permanganate at room temperature using trace amounts of ortho-phosphoric acid as a catalyst. The procedure has been extended for the differential potentiometric determination of mixtures with vanadium, manganese or cerium. The methods are easy, non-time consuming and free from interference by a large number of foreign ions. Conditions are also developed for the differential photometric determination of uranium and iron in mixtures.Based on these procedures, a differential titrimetric procedure has been developed for determination of iron(III), vanadium(V), chromium(VI) and manganese(VII) [or cerium(IV)] in a single solution at room temperature. This procedure has also been tested on Bureau of Standard samples.

---

Titrimetrische Bestimmung von U(IV) allein und in Mischungen mit V(IV), Mn(II), Ce(III) und Fe(II)Anwendung auf die Analyse von Stählen und Legierungen

Zusammenfassung Eine schnelle und genaue Methode wird beschrieben zur potentiometrischen Bestimmung von Uran(IV) mit Permanganat bei Raumtemperatur unter Verwendung von Spuren Orthophosphorsäure als Katalysator. Das Verfahren wurde auf die differentialpotentiometrische Bestimmung im Gemisch mit V, Mn und Ce ausgedehnt. Die rasch und einfach ausführbare Methode wird durch zahlreiche Fremdionen nicht gestört. Eine differentialphotometrische Bestimmung von U(IV) und Fe(II) im Gemisch wird ebenfalls angegeben, außerdem eine differentialtitrimetrische Bestimmung von Fe(III), V(V), Cr(VI), Mn(VII) [oder Ce(IV)] in einer Lösung. Anwendungsbeispiele für Stähle und Legierungen werden beschrieben.

     

Studies on the extraction and spectrophotometric determination of Ni(II), Fe(II), Fe(III) and V(IV) with bis(4-hydroxypent-2-ylidene)diaminoethane

The extraction of Ni(II), Fe(II), Fe(III) and V(IV) with bis(4-hydroxypent-2-ylidene)-diaminoethane from various acids and buffer solutions has been studied. The golden yellow Fe(II) and wine-red Fe(III) complexes have maximum absorption at 445 and 435 nm respectively, and the yellow-green Ni(II) chelate shows two maxima, at 373 and 560 nm. The blue-green V(IV) chelate also has two maxima, at 580 and 660 nm. These characteristics can be used for the determination of these species. Iron, nickel and vanadium have been separated and determined in the presence of one another and of many other elements.     

Amide-based nonheme cobalt(III) olefin epoxidation catalyst: partition of multiple active oxidants Co(V)=O, Co(IV)=O, and Co(III)-OO(O)CR

A mononuclear nonheme cobalt(III) complex of a tetradentate ligand containing two deprotonated amide moieties, [Co(bpc)Cl(2)][Et(4)N] (1; H(2)bpc = 4,5-dichloro-1,2-bis(2-pyridine-2-carboxamido)benzene), was prepared and then characterized by elemental analysis, IR, UV/Vis, and EPR spectroscopy, and X-ray crystallography. This nonheme Co(III) complex catalyzes olefin epoxidation upon treatment with meta-chloroperbenzoic acid. It is proposed that complex 1 shows partitioning between the heterolytic and homolytic cleavage of an O-O bond to afford Co(V)=O (3) and Co(IV)=O (4) intermediates, proposed to be responsible for the stereospecific olefin epoxidation and radical-type oxidations, respectively. Moreover, under extreme conditions, in which the concentration of an active substrate is very high, the Co-OOC(O)R (2) species is a possible reactive species for epoxidation. Furthermore, partitioning between heterolysis and homolysis of the O-O bond of the intermediate 2 might be very sensitive to the nature of the solvent, and the O-O bond of the Co-OOC(O)R species might proceed predominantly by heterolytic cleavage, even in the presence of small amounts of protic solvent, to produce a discrete Co(V) ?O intermediate as the dominant reactive species. Evidence for these multiple active oxidants was derived from product analysis, the use of peroxyphenylacetic acid as the peracid, and EPR measurements. The results suggest that a less accessible Co(V)=O moiety can form in a system in which the supporting chelate ligand comprises a mixture of neutral and anionic nitrogen donors.     

Cacotheline as an oxidimetric reagent. Determination of Sn(II), Cu(I), Ti(III), Fe(II), V(II) and V(III)

Summary Sn(II), Ti(III), Cu(I), Fe(II), V(III) and V(II) can be titrated potentiometrically with cacotheline in 1–4M hydrochloric acid, 0.5–2M hydrochloric acid, 0.5–1.5M sulphuric acid in presence of 4 ml of 10% EDTA solution in a total volume of 50 ml, 9–10M phosphoric acid, 4–8M acetic acid and 3–8M acetic acid respectively. Cacotheline can be used for the assay of tin plate and solder. The cacotheline undergoes a 2-electron reduction reaction. A cacotheline solution (0.005M) in 0.02M hydrochloric acid is fairly stable for several months. The conditional redox potentials of cacotheline have been determined in sulphuric, phosphoric and acetic acid medium.

---

Kakothelin als oxydimetriscbes Reagens. Bestimmung von Sn(II), Cu(I), Ti(III), Fe(II), V(II) und V(III)

Zusammenfassung In 1–4M Salzsäure, in 0,5–2M Salzsäure, 0,5–1,5M Schwefelsäure in Gegenwart von 4 ml 10%iger EDTA-Lösung in einem Gesamtvolumen von 50 ml, in 9–10M Phosphorsäure, in 4–8M Essigsäure bzw. in 3–8M Essigsäure kann man die genannten Kationen potentiometrisch mit Kakothelin titrieren. Dieses eignet sich auch für die Untersuchung von Lötzinn. Kakothelin erleidet dabei eine 2-Elektronen-Reduktions-Reaktion. Seine 0,005M Lösung in 0,02M Salzsäure ist einige Monate beständig. Sein Redoxpotential in Schwefelsäure, Phosphorsäure bzw. Essigsäure wurde bestimmt.

     

Cyano-bridged Mn(III)-M(III) single-chain magnets with M(III)=Co(III), Fe(III), Mn(III), and Cr(III)

A series of isostructural cyano-bridged Mn(III)(h.s.)-M(III)(l.s.) alternating chains, [Mn(III)(5-TMAMsalen)M(III)(CN)(6)]?4H(2)O (5-TMAMsalen(2-)=N,N'-ethylenebis(5-trimethylammoniomethylsalicylideneiminate), Mn(III)(h.s.)=high-spin Mn(III), M(III)(l.s.)=low-spin Co(III), Mn-Co; Fe(III), Mn-Fe; Mn(III), Mn-Mn; Cr(III), Mn-Cr) was synthesized by assembling [Mn(III)(5-TMAMsalen)](3+) and [M(III)(CN)(6)](3-). The chains present in the four compounds, which crystallize in the monoclinic space group C2/c, are composed of an [-Mn(III)-NC-M(III)-CN-] repeating motif, for which the -NC-M(III)-CN- motif is provided by the [M(III)(CN)(6)](3-) moiety adopting a trans bridging mode between [Mn(III)(5-TMAMsalen)](3+) cations. The Mn(III) and M(III) ions occupy special crystallographic positions: a C(2) axis and an inversion center, respectively, forming a highly symmetrical chain with only one kind of cyano bridge. The Jahn-Teller axis of the Mn(III)(h.s.) ion is perpendicular to the N(2)O(2) plane formed by the 5-TMAMsalen tetradentate ligand. These Jahn-Teller axes are all perfectly aligned along the unique chain direction without a bending angle, although the chains are corrugated with an Mn-N(axis) -C angle of about 144°. In the crystal structures, the chains are well separated with the nearest inter-chain M???M distance being relatively large at 9?? due to steric hindrance of the bulky trimethylammoniomethyl groups of the 5-TMAMsalen ligand. The magnetic properties of these compounds have been thoroughly studied. Mn-Fe and Mn-Mn display intra-chain ferromagnetic interactions, whereas Mn-Cr is characterized by an antiferromagnetic exchange that induces a ferrimagnetic spin arrangement along the chain. Detailed analyses of both static and dynamic magnetic properties have demonstrated without ambiguity the single-chain magnet (SCM) behavior of these three systems, whereas Mn-Co is merely paramagnetic with S(Mn)=2 and D/k(B)=-5.3?K (D being a zero-field splitting parameter). At low temperatures, the Mn-M compounds with M=Fe, Mn, and Cr display remarkably large M versus H hysteresis loops for applied magnetic fields along the easy magnetic direction that corresponds to the chain direction. The temperature dependence of the associated relaxation time for this series of compounds systematically exhibits a crossover between two Arrhenius laws corresponding to infinite-chain and finite-chain regimes for the SCM behavior. These isostructural hetero-spin SCMs offer a unique series of alternating [-Mn-NC-M-CN-] chains, enabling physicists to test theoretical SCM models between the Ising and Heisenberg limits.     

New catalytic approach for nano-sized V(IV), Cr(III), Mn(II) and Fe(III)-triazole complexes: detailed spectral,electrochemical and analytical studies

Research on Chemical Intermediates - A new series of metal ion complexes from a triazole-Schiff base was synthesized and fully characterized. The tridentate mode of coordination was the only mode...     

Determination of Fe(II)-Fe(III) and Fe(III)-Ni(II) by the two-component potentiometric complexometric titration

Summary The two-component complexometric potentiometric titration has been applied to the simultaneous determination of Fe(III) and Fe(II), and of Fe(III) and Ni(II) in solution. In each case the two analytes were determined by reading the end-points directly from the titration curve. The end-points are determined in a sense arbitrarily, but they are repeatable and easy to be detected precisely. However, the apparent (found) analytical results are biased. They are effectively corrected with the use of a set of two calibration equations (uncomplete second degree polynomials), which approximate the relationship between found endpoints and true concentrations of analytes in solution. The regression coefficients in the equations are determined on the basis of titration data obtained for standard solutions whose compositions correspond to a 2² factorial. Permanent address: Department of Analytical Chemistry, Jagiellonian University, Krakow     

Discrete Rh(III)/Fe(II) and Rh(III)/Fe(II)/Co(III) cyanide-bridged mixed valence compounds

The heterotrinuclear complexes trans- and cis-[{cis-VI-L(15)Rh(III)(μ-NC)}{trans-III-L(14S)Co(III)(μ-NC)}Fe(II)(CN)(4)](2+) are unprecedented examples of mixed valence complexes based on ferrocyanide bearing three different metal centers. These complexes have been assembled in a stepwise manner from their {trans-III-L(14S)Co(III)}, {cis-VI-L(15)Rh(III)}, and {Fe(II)(CN)(6)} building blocks. The preparative procedure follows that found for other known discrete assemblies of mixed valence dinuclear Cr(III)/Fe(II) and polynuclear Co(III)/Fe(II) complexes of the same family. A simple slow substitution process of [Fe(II)(CN)(6)](4-) on inert cis-VI-[Rh(III)L(15)(OH)](2+) leads to the preparation of the new dinuclear mixed valence complex [{cis-VI-L(15)Rh(III)(μ-NC)}Fe(II)(CN)(5)](-) with a redox reactivity that parallels that found for dinuclear complexes from the same family. The combination of this dinuclear precursor with mononuclear trans-III-[Co(III)L(14S)Cl](2+) enables a redox-assisted substitution on the transient {L(14S)Co(II)} unit to form [{cis-VI-L(15)Rh(III)(μ-NC)}{trans-III-L(14S)Co(III)(μ-NC)}Fe(II)(CN)(4)](2+). The structure of the final cis-[{cis-VI-L(15)Rh(III)(μ-NC)}{trans-III-L(14S)Co(III)(μ-NC)}Fe(II)(CN)(4)](2+) complex has been established via X-ray diffraction and fully agrees with its solution spectroscopy and electrochemistry data. The new species [{cis-VI-L(15)Rh(III)(μ-NC)}{trans-III-L(14S)Co(III)(μ-NC)}Fe(II)(CN)(4)](2+) and [{cis-VI-L(15)Rh(III)(μ-NC)}Fe(II)(CN)(5)](-) show the expected electronic spectra and electrochemical features typical of Class II mixed valence complexes. Interestingly, in the trinuclear complex, these features appear to be a simple addition of those for the Rh(III)/Fe(II) and Co(III)/Fe(II) moieties, despite the vast differences existent in the electronic spectra and electrochemical properties of the two isolated units.     

Biomimetic hydrocarbon oxidation catalyzed by nonheme iron(III) complexes with peracids: evidence for an Fe(V)=O species

Mononuclear nonheme iron(III) complexes of tetradentate ligands containing two deprotonated amide moieties, [Fe(Me(2)bpb)Cl(H(2)O)] (3 a) and [Fe(bpc)Cl(H(2)O)] (4 a), were prepared by substitution reactions involving the previously synthesized iron(III) complexes [Et(3)NH][Fe(Me(2)bpb)Cl(2)] (3) and [Et(3)NH][Fe(bpc)Cl(2)] (4). Complexes 3 a and 4 a were characterized by IR and elemental analysis, and complex 3 a also by X-ray crystallography. Nonheme iron(III) complexes 3, 3 a, 4, and 4 a catalyze olefin epoxidation and alcohol oxidation on treatment with m-chloroperbenzoic acid. Pairwise comparisons of the reactivity of these complexes revealed that the nature of the axial ligand (Cl(-) versus H(2)O) influences the yield of oxidation products, whereas an electronic change in the supporting chelate ligand has little effect. Hydrocarbon oxidation by these catalysts was proposed to involve an iron(V) oxo species which is formed on heterolytic O-O bond cleavage of an iron acylperoxo intermediate (FeOOC(O)R). Evidence for this iron(V) oxo species was derived from KIE (k(H)/k(D)) values, H(2) (18)O exchange experiments, and the use of peroxyphenylacetic acid (PPAA) as the peracid. Our results suggest that an Fe(V)=O moiety can form in a system wherein the supporting chelate ligand comprises a mixture of neutral and anionic nitrogen donors. This work is relevant to the chemistry of mononuclear nonheme iron enzymes that are proposed to oxidize organic substrates via reaction pathways involving high-valent iron oxo species.     

Structural and electrochemical studies of novel bis(mu-methoxo)diiron complexes: observation of Fe(III)Fe(IV) and Fe(IV)Fe(IV) states resonating with phenoxyl radicals

Novel diiron complexes with an Fe2(mu-OMe)2 core were studied as models of the active site of nonheme iron-containing enzymes. X-ray crystal structures of the complexes showed the existence of two types of ligand folding-parallel and twisted-both of which have four virtually equivalent phenolato groups sticking out from the Fe2O2 rhombic plane. Cyclic voltammetry measurements revealed two or more distinct redox waves in a region of relatively high potential, in addition to known Fe(II)/Fe(III) redox waves in a region of lower potential. These new peaks were assigned to the high-valence state of iron atoms, that is, Fe(III)Fe(IV) and Fe(IV)Fe(IV), resonating with the phenoxyl radical(s). The split width of the redox waves ranged from 0.14 to 0.20 eV, which may be a measure of the electronic interaction of the phenolate groups through the Fe2(mu-OMe)2 core.     

Fe(III)Fe(III) and Fe(II)Fe(III) Complexes as Synthetic Analogues for the Oxidized and Reduced Forms of Purple Acid Phosphatases

Novel Fe(III)Fe(III) and Fe(II)Fe(III) complexes [Fe(2)(BBPMP)(&mgr;-OAc)(&mgr;-X)](n)() (1, X = OAc(-), n = 1+; 2, X = OH(-), n = 1+; 3, X = OAc(-), n = 0; 4, X = OH(-), n = 0), where BBPMP(3)(-) is the anion of 2,6-bis[(2-hydroxybenzyl)(2-pyridylmethyl)aminomethyl]-4-methylphenol, and OAc(-) is acetate, were prepared in order to provide models for the active site of purple acid phosphatases (PAPs). Complex 1 was obtained by the reaction of H(3)BBPMP with Fe(ClO(4))(2).6H(2)O in methanol and sodium acetate trihydrate under ambient conditions, while complex 3 was synthesized as described for 1, under an argon atmosphere with low levels of dioxygen. 2 was isolated from 1in acetonitrile by a substitution of the bridging acetate group by hydroxide, while 4 was generated in solution during a spectropotentiostatic experiment on 2, under argon. Complex 1, [Fe(III)(2)(BBPMP)(&mgr;-OAc)(2)]ClO(4).H(2)O, has been characterized by X-ray crystallography. Crystal data: monoclinic, space group P2(1)/n, a = 14.863(5) ?, b = 12.315(3) ?, c = 20.872(8) ?, beta = 90.83(3) degrees, Z = 4. IR, M?ssbauer, magnetic, electronic absorption, and electrochemical properties of 1-3 have been investigated, and some of these properties represent a contribution to the understanding of the dinuclear iron center of PAPs. Complexes 2, [Fe(III)(2)(BBPMP)(&mgr;-OAc)(&mgr;-OH)]ClO(4) (lambda(max) = 568 nm/epsilon = 4760 M(-)(1) cm(-)(1)), and 4 [Fe(II)Fe(III)(BBPMP)(&mgr;-OAc)(&mgr;-OH)] (lambda(max) = 516 nm/epsilon = 4560 M(-)(1) cm(-)(1)), constitute good synthetic analogues for the chromophoric site for the oxidized and reduced forms, respectively, of the enzyme.     

Chemistry of substituted sulphuric acids—XVII. Complexes of V(III), Cr(III), Mn(II) and Fe(II) methylsulphates

V(III), Cr(III), Mn(II) and Fe(II) methylsulphates form stable donor-acceptor complexes with nitrogen donors. 1:1 and 1:2 complexes with bipyridyl have been prepared in respect of trivalent salts and 1:2 and 1:4 metal:base complexes have been obtained in respect of divalent metal salts with bipyridyl and pyridine respectively. Electronic spectra suggest an octahedral geometry around metal ions. IR spectra of the anhydrous metal methylsulphates have been studied and assigned. The changes in the IR spectra of the methylsulphate group in different stereochemical situations have been observed.     

Adsorption behavior of Fe(II) and Fe(III) ions on thiourea cross-linked chitosan with Fe(III) as template

A new type of thiourea cross-linked chitosan with Fe(III) as template (TCCTS template) was synthesized. The adsorption of Fe(II) and Fe(III) on this TCCTS template was studied. The factors affecting adsorption such as pH and contact time were considered. The results showed that the optimum pH value for adsorption was pH = 5.0 and the adsorption equilibrium time was about 60 min. The adsorption isotherms and kinetics were investigated, and the equilibrium data agreed very well with the Langmuir model and the pseudo second-order model could describe adsorption process better than the pseudo first-order model. Results also showed that TCCTS template was a favourable adsorbent for Fe(II) and Fe(III) in aqueous solution.     

1,1—二氰乙烯基—2,2—二硫醇盐第一过渡系列金属配合物的研究 Ⅱ.钒(Ⅳ)和铁(Ⅲ)配合物的研究

文献中研究了1,1-二氰乙烯基-2,2-二硫醇盐(简称i-mnt)的Cu(Ⅱ)和 Ni(Ⅱ)配合物.现合成出i-mnt的钒(Ⅳ)和铁(Ⅲ)配合物,根据钒(Ⅳ)配合物的ESR谱和铁(Ⅲ)配合物的Mossbauer谱及其他光谱探讨它们的键合和结构。     

Polarographic analytical determination of Hg(II), Cu(II), Cd(II), As(III), Sb(III), Ti(IV) and U(VI) in the presence of Fe(III)

The analytical determination of Hg(II), Cu(II), Cd(II), As(III), Sb(III), Ti(IV) and U(VI) in the presence of Fe(III) and 1 M H₂SO₄ are investigated using the polarographic technique. The wave corresponding to the reduction of Fe(III) to Fe(II) was found to be completely suppressed by the addition of 1% pyrogallol. Thus, different mixtures of these elements, viz. Hg(II), Cu(II), Cd(II), As(III) and Fe(III)-mixture (A), Cu(II), Cd(II), Sb(III), As(III) and Fe(III)-mixture (B), and Cu(II), Cd(II), Ti(IV), U(VI) and Fe(III)-mixture (C), were quantitatively determined using 1% pyrogallol and 1 M H₂SO₄ as supporting electrolyte. The i₁/c results give excellent correlations in each case, as indicated from the results of leastsquares regression analysis.     

Heterobinuclear and Heterotrinuclear complexes of Oxorhenium(V) with Cu(II), Ni(II), Fe(III), UO2(VI) and Th(IV) in the solid state

New heteronuclear complexes containing oxorhenium(V), Cu(II), Ni(II), Fe(III), UO₂(VI) and Th(IV) ions were prepared by the reaction of the complex ligand, [ReO(H₄L)Cl]Cl₂, where H₄L = 8,17-dimethyl-6,15-dioxo-5,7,14,16-tetrahydrodibenzo[a,h][14]annulene-2,11-dicarboxylic acid, with the previous transition and actinide salts. Three heteronuclear Cu(II) complexes were isolated depending on the ratio of [ReO(H₄L)Cl]Cl₂?:?Cu(II) ion. When the ratios were 1?:?0.5, 1?:?1 and 1?:?2, the heteronuclear complexes {[ReO(H₃L)Cl]₂CuCl₂(OH₂)₂}SO₄ · H₂O (I), [ReO(H₃L)Cl₂Cu(OH₂)₂(SO₄)] (II) and {ReO(H₂L)Cl[Cu(OH₂)₃ SO₄]₂} (III) were obtained, respectively. Heteronuclear complexes of the other metal cations were obtained by mixing [ReO(H₄L)Cl]Cl₂ with the metal salt in the ratio 1?:?1 to obtain the heteronuclear complexes [ReO(H₃L)Cl₂Ni(OH₂)₂](NO₃)₂ (IV), [ReO(H₃L)Cl₃Fe(OH₂)₃](NO₃)₂ (V), [ReO(H₃L)ClUO₂(NO₃)₂ (OH₂)]Cl (VI) and [ReO(H₃L)Cl₃Th(NO₃)₂(OH₂)]NO₃ · 2H₂O (VII). The complex ligand coordinates with the heterometal ion via the carboxylate group, and the infrared bands ν_as COO and ν_s COO indicate that the carboxylate acts as a unidentate ligand to the heterometal cations. Cu(II) and Fe(III) cations in the heteronuclear complexes have octahedral geometry, while Ni(II) is square planar. Thermal studies explored the possibility of obtaining new heteronuclear complexes pyrolytically in the solid state from the corresponding mother complexes. The structures of the complexes were elucidated by conductance, IR and electronic spectra, magnetic moments, ¹H NMR and TG-DSC measurements as well as by mass spectroscopy.     

Spin crossover in the cyanide-bridged Mo(V)Mn(III) single-chain magnet containing Fe(II) cations

A 1D Mo(V)Mn(III) chain compound balanced by {Fe[HC(3,5-Me(2)pz)(3)](2)}(2+) dications was prepared. This complex displays a typical single-chain magnet character associated with the Mo(V)Mn(III) chain and a spin crossover phenomenon arising from cationic Fe(II) subunits. The spin crossover behavior tends to slightly affect single-chain magnetic properties at low temperature.     

Vanadium (III), oxovanadium (IV) and oxovanadium (V) trifluoro-methanesulfonates

V(SO₃CF₃)₃, VO(SO₃CF₃)₂ and VO(SO₃CF₃)₃ have been prepared by reacting V(O₂CCF₃)₃, VO(O₂CCF₃)₂ and VOC1₃ with HSO₃CF₃. The i.r. data suggest a bridging bidentate nature for SO₃CF₃ groups. The diffuse reflectance spectrum of V(SO₃CF₃)₃ suggests hexacoordination of vanadium, whilst that of VO(SO₃CF₃)₂ is comparable to either five or six coordinated oxovanadium (IV) systems. The magnetic moments of V(SO₃CF₃)₃ and VO(SO₃CF₃)₂ are slightly lower than the spin-only values. Thermal decomposition of these triflates is simple. All the three triflates form coordination complexes with pyridine, 2, 2′-bipyridyl and triphenylphosphine oxide.     

Fe(III), Co(II,III), and Ni(II) phenanthrolinate peroxodisulfates

Complexes with the compositions [Fe(Phen)₃]₂(S₂O₈)₃ · 2H₂O, [Co(Phen)₃]₂(S₂O₈)₃ · 8H₂O, Co(Phen)₂S₂O₈ · 3H₂O, and [Ni(Phen)₂(H₂O)₂]S₂O₈ were synthesized and studied by spectroscopic, X-ray powder diffraction, and TG methods.     

A mixed-valence polyoxovanadate(III,IV) cluster with a calixarene cap exhibiting ferromagnetic V(III)-V(IV) interactions

A series of compounds (cat)[V6O6(OCH3)8(calix)(CH3OH)] was obtained under anaerobic conditions and solvothermal reaction of VOSO4 with p-tert-butylcalix[4]arene (calix) in methanol using different types of bases (Et4NOH, NH4OH, pyridine, Et3N). All compounds contain the same polyoxo(alkoxo)hexavanadate anion [V6O6(OCH3)8(calix)(CH3OH)]- (1) exhibiting a mixed valence {VIIIVIV5O19} core with the so-called Lindqvist structure coordinated to a calix[4]arene macrocycle and cocrystallizing with the conjugated acid of the base (cat = Et4N+, NH4(+), pyridinium, Et3NH+) involved in the synthesis process. The structures have been fully established from X-ray diffraction on single crystals and the mixed valence state has been confirmed by bond valence sum calculations. The magnetic behavior of all compounds are the same because of the polyalkoxohexavanadate anion [V6O6(OCH3)8(calix)(CH3OH)]- (1) and have been interpreted by DFT calculations. Thus the V(III)...V(IV) interactions are found to be weakly ferromagnetic (<5.5 cm(-1)) while the V(IV)...V(IV) are antiferromagnetic (-17.6; -67.6 cm(-1)). The set of the coupling exchange parameters allows a good agreement with the magnetic experimental data.