Calorimetric and computational study of 1,4-dithiacyclohexane 1,1-dioxide (1,4-dithiane sulfone)

This work reports the enthalpies of formation in the condensed and gas state of 1,4-dithiacyclohexane 1,1-dioxide (1,4-dithiane sulfone, 5), derived from the enthalpy of combustion in oxygen, measured by a rotating bomb calorimeter and the variation of vapor pressures with temperatures determined by the Knudsen effusion technique. The theoretically estimated enthalpy of formation was calculated from high-level ab initio molecular orbital calculations at the G2(MP2) level. The theoretical calculations appear to be in very good agreement with experiment. A comparison of the conversion of thiane sulfone 3 to 1,3-dithiane sulfone 4 and 1,4-dithiane sulfone 5 clearly shows the 1,3 isomer to be 6.7 kJ mol(-1) less stable, probably owing to diminished electrostatic repulsion between the sulfur heteroatoms in 1,4-sulfone 5.     

Calorimetric and computational study of 1,3-dithiacyclohexane 1,1-dioxide (1,3-dithiane sulfone)

The enthalpies of combustion and sublimation of 1,3-dithiacyclohexane 1,1-dioxide (1,3-dithiane sulfone) were measured by a rotating-bomb combustion calorimeter and the Knudsen effusion technique, and the gas-phase enthalpy of formation was determined, Delta(f)H(m)*(g) = -326.3 +/- 2.0 kJ mol(-1). Standard ab initio molecular orbital calculations at the G2(MP2) level were performed, and a theoretical study on molecular and electronic structure of the compound has been carried out. Calculated Delta(f)H(m)*(g) values agree very well with the experimental one. These experimental and theoretical studies support the relevance of the repulsive electrostatic interaction between sulfur atoms in 1,3-dithiane sulfone, that apparently counterbalances any n(S) --> rho(C-SO2)* stabilizing hyperconjugative interaction.     

Thermochemistry of 1,3-dithiacyclohexane 1-oxide (1,3-dithiane sulfoxide): calorimetric and computational study

The enthalpies of combustion and sublimation of 1,3-dithiacyclohexane 1-oxide (1,3-dithiane sulfoxide, 2) were measured by a rotating-bomb combustion calorimeter and the Knudsen effusion technique, and the gas-phase enthalpy of formation was determined, DeltafH degrees m(g) = -98.0 +/- 1.9 kJ mol(-1). This value is not as large (negative) as could have been expected from comparison with thermochemical data available for the thiane/thiane oxide reference system. High-level ab initio molecular orbital calculations at the MP2(FULL)/6-31G(3df,2p) level were performed, and the optimized molecular and electronic structures of 2 afforded valuable information on (1) the relative conformational energies of 2-axial and 2-equatorial--the latter being 7.1 kJ mol(-1) more stable than 2-axial, (2) the possible involvement of nS --> sigma*(C-S(O)) hyperconjugation in 2-equatorial, (3) the lack of computational evidence for sigma(S-C) --> sigma*(S-O) stereoelectronic interaction in 2-equatorial, and (4) the relevance of a repulsive electrostatic interaction between sulfur atoms in 1,3-dithiane sulfoxide, which apparently counterbalances any nS --> sigma*(C-S(O)) stabilizing hyperconjugative interaction and accounts for the lower than expected enthalpy of formation for sulfoxide 2.     

Application of the chiral acyl anion equivalent,trans-1,3-dithiane 1,3-dioxide,to an asymmetric synthesis of (R)-salbutamol

An enantioselective synthesis of (R)-salbutamol has been carried out using the chiral, C2 symmetric acyl anion equivalent, (1R,3R)-1,3-dithiane 1,3-dioxide, which undergoes addition to an aromatic aldehyde with very high stereocontrol at 0 degrees C. Pummerer reaction and work-up with lithium ethanethiolate generated the alpha-hydroxy thiolester in high yield and further transformations led to the target compound with high enantiomeric excess.     

New 1,3-dithiane type ionic liquid crystal compounds

New pyridinium type thermotropic ionic liquid crystal materials having a 1,3-dithiane ring in their central core, N -substituted-4-(5-alkyl-1,3-dithian-2-yl)pyridinium bromides ( 8 ), were synthesized. These compounds exhibited a smectic A phase over a very wide temperature range including room temperature.     

New side chain liquid crystalline polysiloxanes containing 1,3-dithiane or 1,3-dioxane rings as mesogenic side groups

New liquid crystal materials: 2-\[p-(9-decenyloxy)phenyl]-5-(p -alkoxyphenyl)-1,3-dioxane( 11 ) and 2-\[p-(9-decenyloxy)phenyl]-5-(p -alkoxyphenyl)-1,3-dithiane( 12 ) were synthesized. The mesomorphic behaviour of these compounds was determined. Though the 1,3-dioxane-type monomer exhibited both SmA and nematic phases, the 1,3-dithiane-type monomer only exhibited a nematic phase. By the hydrosilylation of poly(methylhydrosiloxane) and these monomers, side chain polysiloxanes were synthesized. For the monomers, the transition temperatures of the nematic to isotropic transitions of 1,3-dioxane-type compounds are higher than those of the corresponding 1,3-dithiane-type compounds. However, in the polysiloxane polymer this relation reversed.     

Reaction of lithiated 2-trimethylsilyl-1,3-dithiane with (±)-pantolactone

Pantolactone methoxymethyl ether reacted with lithiated 2-trimethylsilyl-1,3-dithiane to give the corresponding ketene dithioacetal and formal monoaddition product of silicon-free 2-lithio-1,3-dithiane at a ratio of 2:1. Possible ways of formation of the latter are discussed.     

Xanthates derived from 1,3-dithiane and its monosulfoxide; one-carbon radical equivalents

The behaviour and synthetic scope of the C-2 centred radicals derived from 1,3-dithiane and 1,3-dithiane 1-oxide have been studied. Both radicals are available from the corresponding xanthates and have proved suitable substrates for the xanthate transfer reaction. However, the synthetic scope of the former is severely limited by the fact that it does not add to unactivated olefins. The latter on the other hand is a more promising radical precursor and undergoes smooth radical addition to a wide range of alkenes. Furthermore, subsequent transformations of some of the radical adducts confirm its utility as a synthetic equivalent of both the methyl and the formyl radical.     

New ionic liquid crystal compounds having a 1,3-dithiane or 1,3-dioxane ring

New pyridinium type thermotropic ionic liquid crystal materials having a 1,3-dithiane ring in the central core N-substituted 4-(5-alkyl-1,3-dithian-2-yl)pyridinium bromides and the corresponding 1,3-dioxanes were synthesized and their mesomorphic behaviours compared. The principal feature of these compounds is to exhibit a smectic A phase over a very wide temperature range including room temperature.     

Perfluorotetramethylenesulfur difluoride and its derivatives. Perfluoro-1,3-dithietane octafluoride and perfluoro-1,4-dithiane octafluoride

The fluorination of perfluorotetramethylene sulfide with chlorine monofluoride under controlled conditions results in the formation of both sulfur(IV) and sulfur(VI) compounds as main products. While perfluorotetramethylenesulfur tetrafluoride is very stable to thermolysis and to chemical attack, the hydrolysis of the novel perfluorotetramethylenesulfur difluoride affords perfluorotetramethylene sulfoxide, and its pyrolysis gives perfluro(di-n-butyl)disulfide. Chlorine monofluoride converts perfluorotetramethylene sulfoxide to perfluorotetramethyl-enesulfur oxyfluoride, and perfluorotetramethylene sulfone is obtained quantitatively as a decomposition product in contact with Pyrex glass. Perfluoro-1,3-dithietane octafluoride and perfluoro-1,4-dithiane octafluoride are also formed by the reaction of corresponding perfluorocyclic sulfides with CIF at ambient temperature. Infrared, mass and ¹⁹F NMR spectroscopic as well as thermodynamic data are reported.     

Comparative conformational analysis of 1,3-dioxane and 1,3-dithiane

It was shown by ab initio quantum-chemical approximations HF/6-31G(d) and MP2/6-31G(d)//HF/6-31G(d) that the conformational isomerization of 1,3-dioxane and 1,3-dithiane proceeded along common routes. The potential energy surface of both compounds contains six minima including the chair invertomers and enantiomeric flexible forms. They are separated by several potential barriers. It was established by molecular dynamics method that the flexible conformers at heating and keeping at 295–300 K transformed into each other and in the chair conformer.     

Synthesis and stereochemistry of new spiro[5.5]undecane derivatives with 1,3-dioxane, 1,3-dithiane, or 1,3-oxathiane rings

The synthesis and the structural investigations of spiro[5.5]undecane derivatives with S and O containing heterocycles, exhibiting similar [bis(1,3-oxathiane) spiranes] or different (1,3-dioxane-1,3-dithiane spiranes) heterocycles, in the spirane units are reported.     

2-(3,5-Dinitrophenyl)-1,3-dithiane carbanion: a benzylic anion with a low energy triplet state

Calculations at the DFT level predict that benzyl anions with strong π-electron-withdrawing groups in the meta position(s) have low energy diradical or triplet electronic states. Specifically, the 2-(3,5-dinitrophenyl)-1,3-dithiane carbanion is predicted to have nearly degenerate singlet and triplet states at the (U)B3LYP level as a free anion. Its lithium ion pair is predicted to be a ground-state triplet with a substantial (26 kcal/mol) singlet-triplet energy gap. Experiments on this anion using chemical trapping, NMR, and the Evans method strongly suggest that this anion is either a triplet or a ground-state singlet with a very low energy triplet state.     

A rapid, efficient and selective conversion of aldehydes and acetals to their 1,3-dithiane derivatives with 2,2-dimethyl-2-sila-1,3-dithiane

Aldehydes and acetals are cleanly and rapidly converted to the corresponding dithianes with 2,2-dimethyl-2-sila-1,3-dithiane and stoichiometric amounts of boron trifluoride etherate even in the presence of ketones, which do not react competitively with the reagent.     

Soluble and insoluble polymeric 1,3-dithiane reagents for the synthesis of aldehydes from alkyl halides

Through the synthesis and study of model systems as proper dithiane derivatives, vinyl monomers and soluble copolymeric reagents containing 2-unsubstituted 1,3-dithiane rings, we attained the key synthon 1,3-dithiane-5-methanol. Through its reaction with commercial resins, new polymeric reagents useful for supported organic synthesis and combinatorial chemistry were developed. Exploiting the reactivity of position 2 in 1,3-dithiane rings, such polymeric reagents were employed in the production of aldehydes from alkyl halides through a process entirely free from unpleasant odors.     

An effective and mild electrocatalytic procedure for the removal of 1,3-dithiane protecting groups

The 1,3-dithiane protecting group can effectively be removed by indirect electrochemical oxidation under extremely mild conditions, if catalytic amounts of tris(p-tolyl)amine are used as homogeneous electron transfer agents.     

Conformational analysis—CXIV : Molecular mechanics studies of sulfoxides

The conformational characteristics of dimethyl sulfoxide and a number of 6-membered ring sulfoxides have been studied. The thiane, 1,3- and 1,4-dithiane and 1,3,5-trithiane ring systems with various oxide substitutions have been examined. It is found that the chair forms are more stable than the twist or boat in all cases. The energy profiles of the twist-boat manifold are in many cases highly unusual, and quite different from anything so far known experimentally. The axial-equatorial preference of the oxygen is highly variable, depending on the steric and electrostatic interactions found in the particular case.     

Zirconocene-catalyzed alkylative dimerization of 2-methylene-1,3-dithiane via a single electron transfer process to provide symmetrical vic-bis(dithiane)s

A mixture of tertiary alkyl halide and 2-methylene-1,3-dithiane was treated with butylmagnesium bromide in the presence of a catalytic amount of zirconocene dichloride. The reaction resulted in alkylative dimerization to yield the corresponding vic-bis(dithiane). The reaction would proceed as follows. A single electron transfer from low-valent zirconocene to alkyl halide would generate the corresponding alkyl radical. The radical adds to 2-methylene-1,3-dithiane to afford the corresponding radical stabilized by the two sulfur atoms. A couple of the stable radicals finally undergo dimerization.     

A new approach to the reduction of sulfoxides to sulfides with 1,3-dithiane in the presence of electrophilic bromine as catalyst

A new, mild, and novel method is described for the efficient deoxygenation of sulfoxides to their corresponding sulfides with 1,3-dithiane at room temperature in the presence of catalytic amounts of N-bromosuccinimide (NBS), 2,4,4,6-tetrabromo-2,5-cyclohexadienone (TABCO), or Br(2) as the source of electrophilic bromine.     

Calorimetric and computational study of 1,3- and 1,4-oxathiane sulfones

The enthalpies of formation in the condensed and gas states, DeltafH degrees m(cd) and DeltafH degrees m(g), of 1,3- and 1,4-oxathiane sulfones were derived from their respective enthalpies of combustion in oxygen, measured by a rotating bomb calorimeter and the variation of vapor pressures with temperatures determined by the Knudsen effusion technique. Standard ab initio molecular orbital calculations at the G2(MP2) and G3 levels were performed, and a theoretical study on molecular and electronic structure of the compounds has been carried out. Calculated DeltafH degrees m(g) values at the G3 level using atomization reactions agree well with the experimental ones. These experimental and theoretical studies support that the destabilization found in 1,3-oxathiane sulfone, 11.2 kJ mol-1 respecting to 1,4-oxathiane sulfone, is due to the electrostatic repulsion between the negative charges of the axial oxygen of the sulfone and the oxygen of the ring and apparently masks any stabilization originating from the hyperconjugative nO --> sigma*C-SO2 stereoelectronic interaction.