Conducting properties of nanocomposite polymer electrolytes based on polyethylene glycol diacrylate and SiO<Subscript>2</Subscript> nanoparticles at the interface with a lithium electrode

Nanocomposite polymer electrolytes based on polyethylene glycol diacrylate and 1 M LiBF₄ solution in γ-butyrolactone with addition of SiO₂ nanoparticles were synthesized and studied. Resistance measurement at the Li/electrolyte and Li/nanocomposite electrolyte interface by the time-resolved electrochemical impedance showed its significant decrease in the presence of SiO₂ nanoparticles. Charge-discharge cycling of prototypes of Li/LiFePO₄ batteries for 50 cycles also showed the advantage of using nanocomposite polymer electrolytes over electrolytes without SiO₂ additives.     

Network polymer electrolytes based on poly(ester diacrylate), ethylene carbonate,and LiClO<Subscript>4</Subscript>

Network polymer electrolytes based on poly(ester diacrylate), LiClO₄, and ethylene carbonate are synthesized and investigated via the methods of electrochemical impedance spectroscopy, DSC, and thermal analysis. It is found that, for the polymer-LiClO₄ system, the conductivity is 4.2 × 10⁻⁷ S/cm at 20°C. With a gradual increase in the amount of ethylene carbonate, the conductivity first decreases and then increases. It is shown that, when poly(ester diacrylate) is crosslinked in ethylene carbonate, up to 45.5% of the latter compound is retained in the polymer and not lost during heating to 100°C. The conductivity of the electrolyte containing 45.6 wt % poly(ester diacrylate), 45.5 wt % ethylene carbonate, 7.5 wt % LiClO₄, and 1.4 wt % benzoyl peroxide achieves 1.9 × 10⁻⁴ S/cm at 20°C.     

Nanosized TiO<Subscript>2</Subscript> particles decorated on SiO<Subscript>2</Subscript> spheres (TiO<Subscript>2</Subscript>/SiO<Subscript>2</Subscript>): synthesis and photocatalytic activities

Nanosized TiO₂ and nano-anatase TiO₂ decorated on SiO₂ spherical core shells were synthesized by using a sol–gel method. The synthesized pure TiO₂ nano particle and TiO₂ grafted on SiO₂ sphere with various ratios have been characterized for their structure and morphologies by X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), Fourier transform infrared spectrophotometry (FTIR) and transmission electron microscopy (TEM). Their surface areas were measured using the BET method. The photocatalytic activity of all nanocomposites was investigated using methylene blue as a model pollutant. The synthesized TiO₂/SiO₂ particles appeared to be more efficient in the degradation of methylene blue pollutant, as compared to pure TiO₂ particles.     

Effect of poly(ethylene glycol) on the dielectric properties of poly(vinylidene fluoride)/BiFeO<Subscript>3</Subscript>/poly(ethylene glycol) composite films for electronic applications

In the present work a series of poly(vinylidene fluoride)/BiFeO₃/poly(ethylene glycol) composite films were prepared by solvent casting method with poly(vinylidene fluoride) as polymer matrix, bismuth ferrite as ceramic filler and poly(ethylene glycol) as binding agent as well as enhancer. The structural analysis of the composite films by X-ray diffraction confirms that the composites have a distorted rhombohedral structure. The micro-structural analysis shows that the use of poly(ethylene glycol)in the composite films enhances the homogeneity as well as compatibility of BiFeO₃ particles within the poly(vinylidene fluoride) matrix. The dielectric and electrical study done by impedance analyzer reveals that with an increase in poly(ethylene glycol) concentration, there is a subsequent increase in dielectric constant as well as AC electrical conductivity. Finally, the ferroelectric behavior of the composite confirms that the ferroelectric properties of the composites are enhanced by the addition of BiFeO₃ with an increase in poly(ethylene glycol) concentrations. These preliminary results give an idea for possible applications of this type of composites in the field of electronic applications.     

TiO<Subscript>2</Subscript>/SiO<Subscript>2</Subscript> hybrid nanomaterials: synthesis and variable UV-blocking properties

Silica and core–shell structured titania/silica (TiO₂/SiO₂) nanoparticles with particles size ranging from tens to hundreds of nanometers were prepared and deposited onto cotton fabric substrates by sol–gel process. The morphologies of the nanoparticles were characterized by field-emission scanning electron microscope (FE-SEM). The photocatalytic decomposition properties as well as UV-blocking properties of the fabrics treated with SiO₂ and TiO₂/SiO₂ nanoparticles were investigated.     

Fabrication and characterization of TiO<Subscript>2</Subscript>–SiO<Subscript>2</Subscript> composite nanoparticles and polyurethane/(TiO<Subscript>2</Subscript>–SiO<Subscript>2</Subscript>) nanocomposite films

TiO₂–SiO₂ composite nanoparticles were prepared by a sol–gel process. To obtain the assembly of TiO₂–SiO₂ composite nanoparticles, different molar ratios of Ti/Si were investigated. Polyurethane (PU)/(TiO₂–SiO₂) hybrid films were synthesized using the “grafting from” technique by incorporation of modified TiO₂–SiO₂ composite nanoparticles building blocks into PU matrix. Firstly, 3-aminopropyltriethysilane was employed to encapsulate TiO₂–SiO₂ composite nanoparticles’ surface. Secondly, the PU shell was tethered to the TiO₂–SiO₂ core surface via surface functionalized reaction. The particle size of TiO₂–SiO₂ composite sol was performed on dynamic light scattering, and the microstructure was characterized by X-ray diffraction and Fourier transform infrared. Thermogravimetric analysis and transmission electron microscopy (TEM) employed to study the hybrid films. The average particle size of the TiO₂–SiO₂ composite particles is about 38 nm when the molar ratio of Ti/Si reaches to1:1. The TEM image indicates that TiO₂–SiO₂ composite nanoparticles are well dispersed in the PU matrix.     

Preparation and stability of strongly luminescent CdSe/Cd(OH)<Subscript>2</Subscript>/SiO<Subscript>2</Subscript> nanocomposite particles in aqueous solution

Cadmium hydroxide-deposited cadmium selenide nanoparticles were prepared by the addition of cadmium sulfate solution to cadmium selenide nanoparticles in a weak alkaline solution at room temperature. The photoluminescence measurements displayed that the luminescence intensity was greatly increased by the addition of cadmium ions due to the formation of cadmium hydroxide on the surfaces of the cadmium selenide nanoparticles. Then, CdSe/Cd(OH)₂/SiO₂ nanocomposite particles were synthesized using 3-mercatopropyl trimethoxysilane by Stöber method. After the formation of CdSe/Cd(OH)₂/SiO₂ nanocomposite particles, the emission ability was mostly stabilized. Additionally, the stabilization of the composite particles against dilution with the physiological saline was checked. The results showed that the photoluminescence stability was promoted after the deposition of silica on the surfaces of the CdSe/Cd(OH)₂ nanoparticles. Comparison of the stability of CdSe/SiO₂ nanoparticles with that of CdSe/Cd(OH)₂/SiO₂ ones showed that Cd(OH)₂ shell could enhance the photoluminescence effectively.     

Effect of the preparation conditions on the physicochemical and catalytic properties of Ni<Subscript>2</Subscript>P/SiO<Subscript>2</Subscript> catalysts

The effect of the reduction conditions on the physicochemical and catalytic properties of Ni₂P/SiO₂ catalysts was studied. The catalysts were prepared by impregnating silica with a solution of nickel acetate and diammonium hydrogen phosphate followed by drying, calcination, and temperature-programmed reduction. The Ni₂P/SiO₂ catalysts were reduced prior to hydrodeoxygenation (HDO) of methyl palmitate in the catalytic reactor (in situ) at temperatures of 550, 600, and 650 °С for 3 h and at 600 °С for 1 and 6 h. The reduction temperature and reduction time were shown to affect the conversion of methyl palmitate, and the optimal reduction conditions of the Ni₂P/SiO₂ catalysts were found. The Ni₂P/SiO₂ catalyst synthesized according to a widely used preparation method, including steps of passivation and rereduction at 450 °С in addition to the reduction step, is inferior in activity to the samples prepared in situ.     

Effect of calcination temperature on the physicochemical and catalytic properties of FeSO<Subscript>4</Subscript>/SiO<Subscript>2</Subscript> in hydrogen sulfide oxidation

The effect of calcination temperature on the state of the active component of iron-containing catalysts prepared by the impregnation of silica gel with a solution of FeSO₄ and on their catalytic properties in selective H₂S oxidation to sulfur was studied. With the use of thermal analysis, XPS, and Mössbauer spectroscopy, it was found that an X-ray amorphous iron-containing compound of complex composition was formed on the catalyst surface after thermal treatment in the temperature range of 400–500°C. This compound contained Fe³⁺ cations in three nonequivalent positions characteristic of various oxy and hydroxy sulfates and oxide and sulfate groups as anions. Calcination at 600°C led to the almost complete removal of sulfate groups; as a result, the formation of an oxide structure came into play, and it was completed by the production of finely dispersed iron oxide in the ?-Fe₂O₃ modification (the average particle size of 3.2 nm) after treatment at 900°C. As the calcination temperature was increased from 500 to 700°C, an increase in the catalyst activity in hydrogen sulfide selective oxidation was observed because of a change in the state of the active component. A comparative study of the samples by temperature-programmed sulfidation made it possible to establish that an increase in the calcination temperature leads to an increase in the stability of the iron-containing catalysts to the action of a reaction atmosphere.     

Moisture and solvent responsive cellulose/SiO<Subscript>2</Subscript> nanocomposite materials

Water responsive SiO₂/cellulose nanocomposite hydrogels and films were constructed, for the first time, by dispersing SiO₂ nanoparticles into cellulose solution in LiOH/urea solvent, and then by crosslinking with epichlorohydrin or regeneration in coagulation bath, respectively. The cellulose nanocomposite materials were characterized by Field emission scanning electron microscopy, FTIR, dynamic rheology, wide angle X-ray diffraction and mechanical test. The SiO₂/cellulose nanocomposites at wet state or in water displayed unique behaviors, showing higher light transmittance than those before contacting with water. The results revealed that strong hydrogen-bonding interaction among water, cellulose and SiO₂ led the good dispersion of SiO₂ nanoparticles in the cellulose matrix. The incorporation of SiO₂ nanoparticles improved the transmittance and mechanical strength of the cellulose hydrogels, and also enhanced the mechanical strength of the films. Especially, the cellulose/SiO₂ nanocomposite films were milky at dry state, and changed to transparent after being soaked in water, different from the cellulose film without the SiO₂ nanoparticles. In our findings, SiO₂ and cellulose with water could form strong hydrogen bonding to create a homogenous network structure. The cellulose/SiO₂ composite as a smart material exhibited moisture and solvent responsiveness, showing potential applications in moisture detection.     

Effect of nanoscale CeO<Subscript>2</Subscript> on PVDF-HFP-based nanocomposite porous polymer electrolytes for Li-ion batteries

New poly (vinylidenefluoride-co-hexafluoro propylene) (PVDF-HFP)/CeO₂-based microcomposite porous polymer membranes (MCPPM) and nanocomposite porous polymer membranes (NCPPM) were prepared by phase inversion technique using N-methyl 2-pyrrolidone (NMP) as a solvent and deionized water as a nonsolvent. Phase inversion occurred on the MCPPM/NCPPM when it is treated by deionized water (nonsolvent). Microcomposite porous polymer electrolytes (MCPPE) and nanocomposite porous polymer electrolytes (NCPPE) were obtained from their composite porous polymer membranes when immersed in 1.0 M LiClO₄ in a mixture of ethylene carbonate/dimethyl carbonate (EC/DMC) (v/v = 1:1) electrolyte solution. The structure and porous morphology of both composite porous polymer membranes was examined by scanning electron microscope (SEM) analysis. Thermal behavior of both MCPPM/NCPPM was investigated from DSC analysis. Optimized filler (8 wt% CeO₂) added to the NCPPM increases the porosity (72%) than MCPPM (59%). The results showed that the NCPPE has high electrolyte solution uptake (150%) and maximum ionic conductivity value of 2.47 × 10⁻³ S cm⁻¹ at room temperature. The NCPPE (8 wt% CeO₂) between the lithium metal electrodes were found to have low interfacial resistance (760 Ω cm²) and wide electrochemical stability up to 4.7 V (vs Li/Li⁺) investigated by impedance spectra and linear sweep voltammetry (LSV), respectively. A prototype battery, which consists of NCPPE between the graphite anode and LiCoO₂ cathode, proves good cycling performance at a discharge rate of C/2 for Li-ion polymer batteries.     

Electrochemical properties of solid electrolytes based on BaSm<Subscript>2</Subscript>S<Subscript>4</Subscript>

Solid solutions based on BaSm₂S_{4 ? x} mol % BaS (Sm₂S₃) are obtained. Oxide intermediates were homogenized using chemical and mechanical mixing methods. The solid solution region is determined. Complex conductivity is studied and conductivity activation energy is calculated for samples with different history. Electrolytic properties of phases based on barium thiosamarate are studied. Vacancy mechanism of defect formation is suggested.     

Photopolymerization of poly(ethylene glycol) diacrylate on eosin-functionalized surfaces

We describe a new method that allows photopolymerization of hydrogels to occur on surfaces functionalized with eosin. In this work, glass and silicon surfaces were derivatized with eosin and photopolymerization was carried out using visible light (514 nm). This mild condition may have advantages over methods that use ultraviolet (UV) light (e.g., for encapsulation of cells and proteins, in drug screening, or in biosensing applications). The hydrogel formed on the modified surface is remarkably stable for an extended period of time. The resultant hydrogel was hydrated for more than 18 months without suffering delamination from the substrate surface. This strongly suggests covalent attachment of the hydrogel to the surface. Contact angle titration measurements and X-ray photoelectron spectroscopy analysis of eosin surfaces before and after irradiation in the presence of triethanolamine suggest that the eosin radical is responsible for the covalent attachment of the gel onto the substrate surface. This method allows for 2-D patterning of hydrogels, which is demonstrated here using the microcontact printing technique. However, noncontact photolithography could be used to form similar patterns by directing light through a mask. This method can be easily implemented to form arrays of fluorophores and proteins in situ.     

Synthesis and characterization of a new hybrid TiO<Subscript>2</Subscript>/SiO<Subscript>2</Subscript> filler for lithium conducting gel electrolytes

This paper describes the synthesis and properties of a new type of ceramic fillers for composite polymer gel electrolytes. Hybrid TiO₂-SiO₂ ceramic powders have been obtained by co-precipitation from titanium(IV) sulfate solution using sodium silicate as the precipitating agent. The resulting submicron-size powders have been applied as fillers for composite polymer gel electrolytes for Li-ion batteries based on poly(vinylidene fluoride-co-hexafluoropropylene) (PVdF/HFP) copolymeric membranes. The powders, dry membranes and gel electrolytes have been examined structurally and electrochemically, showing favorable properties in terms of electrolyte uptake and electrochemical characteristics in Li-ion cells.     

Crystallization kinetics of poly(vinylidene fluoride)/MMT,SiO<Subscript>2</Subscript>, CaCO<Subscript>3</Subscript>, or PTFE nanocomposite by differential scanning calorimeter

The nonisothermal crystallization kinetics of poly(vinylidene fluoride) (PVDF) in PVDF/MMT, SiO₂, CaCO₃, or PTFE composites was investigated through differential scanning calorimetry measurements. The enhanced nucleation of PVDF in its nanocomposites with four types of nanoparticle, and their impact on the crystallization kinetics and melting behaviors were discussed. The modified Avrami method and combined Ozawa–Avrami approaches successfully described the primary crystallization of PVDF in nanocomposite samples under the nonisothermal crystallization process. The activation energy was determined according to the Friedman method and it was quite fit with the results of the analysis according to the modified Avrami model and a combined Ozawa–Avrami model.     

Multifunctional performances of nanocomposite SiO<Subscript>2</Subscript>/TiO<Subscript>2</Subscript> doped cationic EBODAC film coated on natural cellulose matrix

Reverse micellar microemulsions were utilised to synthesise stable lead titanate colloids from typical sol–gel type molecular precursors. The particles of a few nanometres in diameter that formed by hydrolysis in the micelle cores demonstrated a nanocrystalline texture without the need for thermal treatment. In a chemical solution deposition routine based on the nanoparticle dispersions, ferroelectric PbTiO₃ thin films showing excellent remanent polarisation of more than 50 μC cm⁻² were derived. The electrical characteristics of the layers were correlated to their microstructure which was controlled by the precursor composition and the annealing conditions. A columnar morphology that was realised by spinning on coatings of up to 100 nm in individual thickness proved most favourable with respect to the ferroelectric performance of the films.     

Enhancement in physicochemical properties of citric acid/nano SiO<Subscript>2</Subscript> treated sustainable wood-starch nanocomposites

Citric acid was used as the cross-linker to prepare the sustainable wood starch nanocomposites (WSNC) from the renewable resources like starch and soft wood flour using water as the solvent. Nano SiO₂ was employed to develop the physicochemical properties of the WSNC via a green path. In this process, starch was grafted with methylmethacrylate (MMA) and SiO₂ was modified with N-cetyl-N,N,N-trimethyl ammonium bromide. Three different percentage of modified nano SiO₂ (1–5 phr) were employed in the preparation of the composites and their properties were characterized by Fourier transform infrared spectroscopy. The morphological features of the composites were investigated through transmission electron microscopy and scanning electron microscopy study. Mechanical and dynamic mechanical properties like storage modulus, loss factors and tan δ value of the composites were thoroughly investigated. Thermal stability, water resistance and flammability of the composites were significantly improved after incorporation of modified SiO₂. The maximum improvements in properties were achieved containing 3 phr modified SiO₂ composites.     

Thiol-functionalized Fe<Subscript>3</Subscript>O<Subscript>4</Subscript>/SiO<Subscript>2</Subscript> microspheres with superparamagnetism and their adsorption properties for Au(III) ion separation

Thiol-functionalized Fe₃O₄/SiO₂ microspheres (Fe₃O₄/SiO₂-SH) with high saturation magnetization (69.3 emu g^–1), superparamagnetism, and good dispersibility have been prepared by an ethylene glycol reduction method in combination with a modified Stöber method. The as-prepared composite magnetic spheres are characterized with fourier transform infrared spectroscopy (FT-IR), zeta potential, X-ray powder diffraction (XRD), transmission electron microscopy (TEM), and superconducting quantum interference magnetometer, and tested in separation of Au(III) ions from aqueous solutions. The data for Au(III) adsorption on Fe₃O₄/SiO₂-SH are analyzed with the Langmuir, Freundlich, Temkin, and Dubinin–Radushkevich isotherm models, and the pseudo-first-order, pseudo-second-order, and intraparticle diffusion kinetics models. The adsorption behaviors of Au(III) on Fe₃O₄/SiO₂-SH follow the Langmuir isotherm model, and the adsorption process conforms to the pseudo-second-order kinetic model. The maximum adsorption capacity of Au(III) on Fe₃O₄/SiO₂-SH is 43.7 mg g^–1. Acetate anions play an important role yet Cu(II) ions have little interference in the adsorption of Au(III) on the adsorbent. A satisfactory recovery percentage of 89.5% is acquired by using an eluent with 1 M thiourea and 5% HCl, although thiols have a high affinity to Au(III) ions based on the hard-soft acid-base (HSAB) theory by Pearson.     

Phase relationships in the SiO<Subscript>2</Subscript>-TiO<Subscript>2</Subscript> system

Phase equilibria in a miscibility gap of the SiO₂-TiO₂ system were studied. A visual polythermal analysis and annealing of samples were performed in a Galakhov microfurnace. The microstructure and composition of the obtained samples were investigated by scanning electron microscopy and electron probe microanalysis. A critical analysis of the experimental data was made. Thermodynamically optimized based on the sub-regular solution model, a phase diagram of the SiO₂-TiO₂ system was constructed.