Chiroptical Sensing of Amino Acid Derivatives by Host–Guest Complexation with Cyclo[6]aramide

A hydrogen-bonded (H-bonded) amide macrocycle was found to serve as an effective component in the host–guest assembly for a supramolecular chirality transfer process. Circular dichroism (CD) spectroscopy studies showed that the near-planar macrocycle could produce a CD response when combined with three of the twelve L-α-amino acid esters (all cryptochiral molecules) tested as possible guests. The host–guest complexation between the macrocycle and cationic guests was explored using NMR, revealing the presence of a strong affinity involving the multi-point recognition of guests. This was further corroborated by density functional theory (DFT) calculations. The present work proposes a new strategy for amplifying the CD signals of cryptochiral molecules by means of H-bonded macrocycle-based host–guest association, and is expected to be useful in designing supramolecular chiroptical sensing materials.     

Reversible Diels–Alder Reactions with a Fluorescent Dye on the Surface of Magnetite Nanoparticles

Diels–Alder reactions on the surface of nanoparticles allow a thermoreversible functionalization of the nanosized building blocks. We report the synthesis of well-defined magnetite nanoparticles by thermal decomposition reaction and their functionalization with maleimide groups. Attachment of these dienophiles was realized by the synthesis of organophosphonate coupling agents and a partial ligand exchange of the original carboxylic acid groups. The functionalized iron oxide particles allow a covalent surface attachment of a furfuryl-functionalized rhodamine B dye by a Diels–Alder reaction at 60 °C. The resulting particles showed the typical fluorescence of rhodamine B. The dye can be cleaved off the particle surface by a retro-Diels–Alder reaction. The study showed that organic functions can be thermoreversibly attached onto inorganic nanoparticles.     

Bioactive Polyketide and Diketopiperazine Derivatives from the Mangrove-Sediment-Derived Fungus Aspergillus sp. SCSIO41407

Ten polyketide derivatives (1–10), including a new natural product named (E)-2,4-dihydroxy-3-methyl-6-(2-oxopent-3-en-1-yl) benzaldehyde (1), and five known diketopiperazines (11–15), were isolated from the mangrove-sediment-derived fungus Aspergillus sp. SCSIO41407. The structures of 1–15 were determined via NMR and MS spectroscopic analysis. In a variety of bioactivity screening, 3 showed weak cytotoxicity against the A549 cell line, and 2 exhibited weak antibacterial activity against methicillin-resistant Staphylococcus aureus (MRSA). Compounds 3, 5, and 6 showed inhibition against acetylcholinesterase (AChE) with IC₅₀ values of 23.9, 39.9, and 18.6 μM. Compounds 11, 12, and 14 exhibited obvious inhibitory activities of lipopolysaccharide (LPS)-induced nuclear factor-κB (NF-κB) with IC₅₀ values of 19.2, 20.9, and 8.7 μM, and they also suppressed RANKL-induced osteoclast differentiation in bone marrow macrophages cells (BMMCs), with the concentration of 5 μM. In silico molecular docking with AChE and NF-κB p65 protein were also performed to understand the inhibitory activities, and 1, 11–14 showed obvious protein/ligand-binding effects to the NF-κB p65 protein.     

A–X⋯σ Interactions—Halogen Bonds with σ-Electrons as the Lewis Base Centre

CCSD(T)/aug-cc-pVTZ//ωB97XD/aug-cc-pVTZ calculations were performed for halogen-bonded complexes. Here, the molecular hydrogen, cyclopropane, cyclobutane and cyclopentane act as Lewis base units that interact through the electrons of the H–H or C–C σ-bond. The FCCH, ClCCH, BrCCH and ICCH species, as well as the F₂, Cl₂, Br₂ and I₂ molecular halogens, act as Lewis acid units in these complexes, interacting through the σ-hole localised at the halogen centre. The Quantum Theory of Atoms in Molecules (QTAIM), the Natural Bond Orbital (NBO) and the Energy Decomposition Analysis (EDA) approaches were applied to analyse these aforementioned complexes. These complexes may be classified as linked by A–X···σ halogen bonds, where A = C, X (halogen). However, distinct properties of these halogen bonds are observed that depend partly on the kind of electron donor: dihydrogen, cyclopropane, or another cycloalkane. Examples of similar interactions that occur in crystals are presented; Cambridge Structural Database (CSD) searches were carried out to find species linked by the A–X···σ halogen bonds.     

Highly Oxygenated Triterpenoids and Diterpenoids from Fructus Rubi (Rubus chingii Hu) and Their NF-kappa B Inhibitory Effects

During a phytochemical investigation of the unripe fruits of Rubus chingii Hu (i.e., Fructus Rubi, a traditional Chinese medicine named “Fu-Pen-Zi”), a number of highly oxygenated terpenoids were isolated and characterized. These included nine ursane-type (1, 2, and 4–10), five oleanane-type (3, 11–14), and six cucurbitane-type (15–20) triterpenoids, together with five ent-kaurane-type diterpenoids (21–25). Among them, (4R,5R,8R,9R,10R,14S,17S,18S,19R,20R)-2,19α,23-trihydroxy-3-oxo-urs-1,12-dien-28-oic acid (rubusacid A, 1), (2R*,4S*,5R*,8R*,9R*,10R*,14S*,17S*, 18S*,19R*,20R*)-2α,19α,24-trihydroxy-3-oxo-urs-12-en-28-oic acid (rubusacid B, 2), (5R,8R,9R,10R, 14S,17R,18S,19S)-2,19α-dihydroxy-olean-1,12-dien-28-oic acid (rubusacid C, 3), and (3S,5S,8S,9R, 10S,13R,16R)-3α,16α,17-trihydroxy-ent-kaur-2-one (rubusone, 21) were previously undescribed. Their chemical structures and absolute configurations were elucidated on the basis of spectroscopic data and electronic circular dichroism (ECD) analyses. Compounds 1 and 3 are rare naturally occurring pentacyclic triterpenoids featuring a special α,β-unsaturated keto-enol (diosphenol) unit in ring A. Cucurbitacin B (15), cucurbitacin D (16), and 3α,16α,20(R),25-tetrahydroxy-cucurbita-5,23- dien-2,11,22-trione (17) were found to have remarkable inhibitory effects against NF-κB, with IC₅₀ values of 0.08, 0.61, and 1.60 μM, respectively.     

Nanosized T1 MRI Contrast Agent Based on a Polyamidoamine as Multidentate Gd Ligand

A linear polyamidoamine (PAA) named BAC-EDDS, containing metal chelating repeat units composed of two tert-amines and four carboxylic groups, has been prepared by the aza-Michael polyaddition of ethylendiaminodisuccinic (EDDS) with 2,2-bis(acrylamido)acetic acid (BAC). It was characterized by size exclusion chromatography (SEC), FTIR, UV–Vis and NMR spectroscopies. The pK_a values of the ionizable groups of the repeat unit were estimated by potentiometric titration, using a purposely synthesized molecular ligand (Agly-EDDS) mimicking the structure of the BAC-EDDS repeat unit. Dynamic light scattering (DLS) and ζ-potential analyses revealed the propensity of BAC-EDDS to form stable nanoaggregates with a diameter of approximately 150 nm at pH 5 and a net negative charge at physiological pH, in line with an isoelectric point <2. BAC-EDDS stably chelated Gd (III) ions with a molar ratio of 0.5:1 Gd (III)/repeat unit. The stability constant of the molecular model Gd-Agly-EDDS (log K = 17.43) was determined as well, by simulating the potentiometric titration through the use of Hyperquad software. In order to comprehend the efficiency of Gd-BAC-EDDS in contrasting magnetic resonance images, the nuclear longitudinal (r₁) and transverse (r₂) relaxivities as a function of the externally applied static magnetic field were investigated and compared to the ones of commercial contrast agents. Furthermore, a model derived from the Solomon–Bloembergen–Morgan theory for the field dependence of the NMR relaxivity curves was applied and allowed us to evaluate the rotational correlation time of the complex (τ = 0.66 ns). This relatively high value is due to the dimensions of Gd-BAC-EDDS, and the associated rotational motion causes a peak in the longitudinal relaxivity at ca. 75 MHz, which is close to the frequencies used in clinics. The good performances of Gd-BAC-EDDS as a contrast agent were also confirmed through in vitro magnetic resonance imaging experiments with a 0.2 T magnetic field.     

Terminal and Internal Alkyne Complexes and Azide-Alkyne Cycloaddition Chemistry of Copper(I) Supported by a Fluorinated Bis(pyrazolyl)borate

Copper plays an important role in alkyne coordination chemistry and transformations. This report describes the isolation and full characterization of a thermally stable, copper(I) acetylene complex using a highly fluorinated bis(pyrazolyl)borate ligand support. Details of the related copper(I) complex of HC≡CSiMe₃ are also reported. They are three-coordinate copper complexes featuring η²-bound alkynes. Raman data show significant red-shifts in C≡C stretch of [H₂B(3,5-(CF₃)₂Pz)₂]Cu(HC≡CH) and [H₂B(3,5-(CF₃)₂Pz)₂]Cu(HC≡CSiMe₃) relative to those of the corresponding alkynes. Computational analysis using DFT indicates that the Cu(I) alkyne interaction in these molecules is primarily of the electrostatic character. The π-backbonding is the larger component of the orbital contribution to the interaction. The dinuclear complexes such as Cu₂(μ-[3,5-(CF₃)₂Pz])₂(HC≡CH)₂ display similar Cu-alkyne bonding features. The mononuclear [H₂B(3,5-(CF₃)₂Pz)₂]Cu(NCMe) complex catalyzes [3 + 2] cycloadditions between tolyl azide and a variety of alkynes including acetylene. It is comparatively less effective than the related trinuclear copper catalyst {μ-[3,5-(CF₃)₂Pz]Cu}₃ involving bridging pyrazolates.     

Use of TLC-Densitometric Method for Determination of Valproic Acid in Capsules

Determination of valproic acid in the drug was carried out on the aluminum silica gel 60F₂₅₄ plates and using acetone–water–chloroform–ethanol–ammonia at a volume ratio of 30:1:8:5:11 as the mobile phase, respectively. Two methods of detection of valproic acid were used. The first was a 2% aqueous CuSO₄×5H₂O solution, and the second was a 2′,7′-dichlorofluorescein-aluminum chloride-iron (III) chloride system. The applied TLC-densitometric method is selective, linear, accurate, precise, and robust, regardless of the visualizing reagent used for the determination of valproic acid in Convulex capsules. It has low limits of detection (LOD) and limits of quantification (LOQ), which are equal to 5.8 μg/spot and 17.4 μg/spot using a 2% aqueous CuSO₄×5H₂O solution as visualizing agent and also 0.32 μg/spot and 0.97 μg/spot using a 2′,7′-dichlorofluorescein-aluminum chloride-iron (III) chloride system as visualizing reagent, respectively. The described analytical method can additionally be used to study the identity of valproic acid in a pharmaceutical preparation. The linearity range was found to be 20.00–80.00 μg/spot and 1.00–2.00 μg/spot for valproic acid detected on chromatographic plates using a 2% aqueous CuSO₄×5H₂O solution and the 2′,7′-dichlorofluorescein-aluminum chloride-iron (III) chloride system, respectively. A coefficient of variation that was less than 3% confirms the satisfactory accuracy and precision of the proposed method. The results of the assay of valproic acid equal 96.2% and 97.0% in relation to the label claim that valproic acid fulfill pharmacopoeial requirements. The developed TLC-densitometric method can be suitable for the routine analysis of valproic acid in pharmaceutical formulations. The proposed TLC-densitometry may be an alternative method to the modern high-performance liquid chromatography and square wave voltammetry in the control of above-mentioned substances, and it can be applied when other analytical techniques is not affordable in the laboratory.     

Insight into Spodium–π Bonding Characteristics of the MX2⋯π (M = Zn,Cd and Hg; X = Cl,Br and I) Complexes—A Theoretical Study

The spodium–π bonding between MX₂ (M = Zn, Cd, and Hg; X = Cl, Br, and I) acting as a Lewis acid, and C₂H₂/C₂H₄ acting as a Lewis base was studied by ab initio calculations. Two types of structures of cross (T) and parallel (P) forms are obtained. For the T form, the X–M–X axis adopts a cross configuration with the molecular axis of C≡C or C=C, but both of them are parallel in the P form. NCI, AIM, and electron density shifts analyses further, indicating that the spodium–π bonding exists in the binary complexes. Spodium–π bonding exhibits a partially covalent nature characterized with a negative energy density and large interaction energy. With the increase of electronegativity of the substituents on the Lewis acid or its decrease in the Lewis base, the interaction energies increase and vice versa. The spodium–π interaction is dominated by electrostatic interaction in most complexes, whereas dispersion and electrostatic energies are responsible for the stability of the MX₂⋯C₂F₂ complexes. The spodium–π bonding further complements the concept of the spodium bond and provides a wider range of research on the adjustment of the strength of spodium bond.     

Two-dimensional heterostructures built from ultrathin CeO2 nanosheet surface-coordinated and confined metal–organic frameworks with enhanced stability and catalytic performance

Two-dimensional (2D) metal–organic framework (MOF) based heterostructures will be greatly advantageous to enhance catalytic performance because they increase the contact surface and charge transfer. Herein, a novel 2D heterostructure named CeO₂@NiFe-MOFs, in which monolayer NiFe-MOFs is coordinated with ceria (CeO₂) to improve catalytic and stability performance, is successfully constructed by the strategy of in situ growth on the surface of ultrathin CeO₂ nanosheets being functionalized with monolayer carboxylic acid groups. The 2D heterostructure possesses a sandwich structure, where monolayer NiFe-MOFs are coordinated to both the top and bottom surface of CeO₂ nanosheets via joining carboxylic acid groups. In particular, CeO₂ with robust coordination plays a significant role in the anchoring of carboxylic acid groups and binding strength of heterostructures. The 2D CeO₂@NiFe-MOF heterostructure with a joint effect of metal–ligand coordination not only presents good structural stability but also significantly enhances the oxygen evolution reaction (OER) efficiencies in comparison to bare NiFe-MOFs, achieving a current density of 20 mA cm⁻² at a low overpotential of 248 mV as well as durability for at least 40 h. Meanwhile, the electronics, optics, band gap energy and local strains of CeO₂ decorated with 2D NiFe-MOFs are different to the properties of bare CeO₂. Our study on the construction of an ultrathin CeO₂ surface-coordinated and confined MOF layer may pave a new way for novel 2D MOF composites/heterostructures or multi-functional 2D CeO₂ materials to be used in energy conversion or other fields.

A synthetic strategy to prepare 2D heterostructures from ultrathin CeO₂ surface-coordinated metal–organic framework was proposed, proving multiple effects of metal-coordinated interactions in 2D heterostructures.     

[(C_(16)H_(32)N_4)~(-4)·2Mn~(2+)·4HCl·[(C_(16)H_(36)N_4)·2H_2O]多元包合物的晶体结构

[(4氮间杂六甲基十四烷环)~(-4)·2Mn~(2+)]·4HCl·[4氮间杂六甲基十四烷环)·2H_2O]的晶体结构已用单晶X线衍射技术测定完成。它属于三斜晶系,P_1空间群,晶胞参数a=9.028(2),b=11.055(2),c=12.202(4),α=71.70(2),B=88.41(2),γ=75.32(2)~°,Z=1。对于2597个可观察独立反射计算R=0.073。结构分析证实,该晶体存在有四类物种,由负4价的四氮间杂六甲基十四烷环(简称电负性大环Ⅱ),2个Mn~(2+)正离子,4个HCl分子和一个携带2个结晶水的4氮间杂六甲基十四烷环(简称电中性大环Ⅰ)组成。 4个HCl分子处于电负性大环Ⅱ的周围,大环Ⅱ和Mn~(2+)离子间按离子键特点取空间最稳定构型与电中性大环Ⅰ沿c方向周期性交替排布,构成四元包合物O~-、N~-、Cl~-等电负性强的离子之间形成很强的H键网。 六十年代以来,以四氨间杂六甲基十四烷环作配体,以Co~(2+)、Co~(3+)、Ni~(2+)等金属离子为络合中心的大环络合物,国外已有许多报导。这些结构的共同特点是大环配体的4个氮原子围绕金属离子以构成四配位或六配位结构,研究表明,络合以后金属的电子组态发生了变化。 近来,我们将Mn~(2+)与上述的配体反应,结果得到与上述结构绝然不同的化合物。NMR谱证实,该化合物中包含电中性和电负性两种大环。环伏安法测其锰离子是2价正离子(详见     

Phyto-Extract-Mediated Synthesis of Silver Nanoparticles Using Aqueous Extract of Sanvitalia procumbens,and Characterization,Optimization and Photocatalytic Degradation of Azo Dyes Orange G and Direct Blue-15

Green synthesis of silver nanoparticles (AgNPs) employing an aqueous plant extract has emerged as a viable eco-friendly method. The aim of the study was to synthesize AgNPs by using plant extract of Sanvitalia procumbens (creeping zinnia) in which the phytochemicals present in plant extract act as a stabilizing and reducing agent. For the stability of the synthesized AgNPs, different parameters like AgNO₃ concentration, volume ratios of AgNO₃, temperature, pH, and contact time were studied. Further, AgNPs were characterized by UV–visible spectroscopy, FT-IR (Fourier Transform Infrared Spectroscopy), XRD (X-ray Diffraction), SEM (Scanning Electron Microscopy), and EDX (Energy Dispersive X-ray Spectrometer) analysis. FT-IR analysis showed that the plant extract contained essential functional groups like O–H stretching of carboxylic acid, N–H stretching of secondary amides, and C–N stretching of aromatic amines, and C–O indicates the vibration of alcohol, ester, and carboxylic acid that facilitated in the green synthesis of AgNPs. The crystalline nature of synthesized AgNPs was confirmed by XRD, while the elemental composition of AgNPs was detected by energy dispersive X-ray analysis (EDX). SEM studies showed the mean particle diameter of silver nanoparticles. The synthesized AgNPs were used for photocatalytic degradation of Orange G and Direct blue-15 (OG and DB-15), which were analyzed by UV-visible spectroscopy. Maximum degradation percentage of OG and DB-15 azo dyes was observed, without any significant silver leaching, thereby signifying notable photocatalytic properties of AgNPs.     

Efficient Photoelectrochemical Energy Conversion using Spinach Photosystem II (PSII) in Lipid Multilayer Films

The need for clean, renewable energy has fostered research into photovoltaic alternatives to silicon solar cells. Pigment–protein complexes in green plants convert light energy into chemical potential using redox processes that produce molecular oxygen. Here, we report the first use of spinach protein photosystem II (PSII) core complex in lipid films in photoelectrochemical devices. Photocurrents were generated from PSII in a ∼2 μm biomimetic dimyristoylphosphatidylcholine (DMPC) film on a pyrolytic graphite (PG) anode with PSII embedded in multiple lipid bilayers. The photocurrent was ∼20 μA cm⁻² under light intensity 40 mW cm⁻². The PSII–DMPC anode was used in a photobiofuel cell with a platinum black mesh cathode in perchloric acid solution to give an output voltage of 0.6 V and a maximum output power of 14 μW cm⁻². Part of this large output is related to a five-unit anode–cathode pH gradient. With catholytes at higher pH or no perchlorate, or using an MnO₂ oxygen-reduction cathode, the power output was smaller. The results described raise the possibility of using PSII–DMPC films in small portable power conversion devices.     

Structural evidence of the formation of ZnPc-DBU complex during recrystallisation of commercially available ZnPc dye

Recrystallisation of commercially available ZnPc dye in a liquid 2-cyanopyridine or 4-cyanopyridine leads to formation of well developed parallelepipedal violet single crystals with the same composition in both cases. A combination of X-ray single crystal analysis and NMR spectroscopy together with an elemental analysis enable to identify the composition and the structure of the obtained ZnPc-DBU crystals (where DBU is 1,8-diazabicyclo[4.5.0]undec-7-ene). The commercially available ZnPc dye contains DBU as impurity, since DBU is usually used as a strong base in the synthesis of phthalocyanines, and therefore recrystallisation in 2- or 4-cyanopyridine as weaker bases leads to formation of ZnPc-DBU crystals. The ZnPc-DBU crystallizes in the centrosymmetric space group P2₁/c of the monoclinic system with four molecules per unit cell. The Zn center is equatorially coordinated by four isoindole N atom of phthalocyaninato macrocycle and by the N atom of DBU ligand in an axial position. Thus the ZnPc unit of the ZnPc-DBU molecule adopts a saucer shape form. The ZnPc-DBU compound exhibits better solubility than the parent ZnPc compound due to the steric hindrance of the axial DBU ligand that lowers the aggregation in solution. The electronic spectra in DBU and cyclohexane solutions exhibit the B and Q bands typical of the phthalocyaninate(2-) macrocycle. The bands are blue shifted in cyclohexane solution in relation to DBU solution.     

In Vitro Antineoplastic and Antiviral Activity and In Vivo Toxicity of Geum urbanum L. Extracts

This study evaluated the in vitro antineoplastic and antiviral potential and in vivo toxicity of twelve extracts with different polarity obtained from the herbaceous perennial plant Geum urbanum L. (Rosaceae). In vitro cytotoxicity was determined by ISO 10993-5/2009 on bladder cancer, (T-24 and BC-3C), liver carcinoma (HEP-G2) and normal embryonic kidney (HEK-293) cell lines. The antineoplastic activity was elucidated through assays of cell clonogenicity, apoptosis induction, nuclear factor kappa B p65 (NFκB p65) activation and total glutathione levels. Neutral red uptake study was applied for antiviral activity. The most promising G. urbanum extract was analyzed by UHPLC–HRMS. The acute in vivo toxicity analysis was carried out following OEDC 423. The ethyl acetate extract of aerial parts (EtOAc-AP) exhibited the strongest antineoplastic activity on bladder cancer cell lines (IC₅₀ = 21.33–25.28 µg/mL) by inducing apoptosis and inhibiting NFκB p65 and cell clonogenicity. EtOAc and n-butanol extracts showed moderate antiviral activity against human adenovirus type 5 and human simplex virus type I. Seventy four secondary metabolites (gallic and ellagic acid derivatives, phenolic acids, flavonoids, etc.) were identified in EtOAc-AP by UHPLC–HRMS. This extract induced no signs of acute toxicity in liver and kidney specimens of H-albino mice in doses up to 210 mg/kg. In conclusion, our study contributes substantially to the detailed pharmacological characterization of G. urbanum, thus helping the development of health-promoting phytopreparations.     

Density functional theoretical study of pKa of RCOOH (RH,CH3, and C2H5) using the combination of the extended clusters‐continuum model

The accurate pK_a determinations for three carboxylic acids have been investigated using the combination of the extended clusters‐continuum model at B3LYP/6‐31+g(d,p) and B3LYP/6‐311++g(d,p) levels. To take into account of the effect of the water combined with carboxylic acids in different positions, eleven molecular clusters were considered. Among these clusters, the one involving the carboxylic acid wrapped up with water molecules and saturated with hydrogen bonds (four hydrogen bonds around ? COOH) leads to the best B3LYP pK_a results compared to the experimental data. For those clusters saturated with hydrogen bonds, when n = 3 (the number of water molecules), the average absolute errors between the calculated pK_a results and experimental data of these three carboxylic acids were 0.19 (0.23) and 0.12 (0.22) pK_a at B3LYP/6‐31+g(d,p)//PCM (IEFPCM) and B3LYP/6‐311++g(d,p)//PCM (IEFPCM) levels, respectively; when n = 4, they are 0.53 (1.23) and 1.09 (1.03) pK_a, respectively. On the basis of the above results, the molecular cluster saturated with four hydrogen bonds formed by three waters and one carboxylic acid molecule was the chief existence in the carboxylic acid solution. © 2011 Wiley Periodicals, Inc. Int J Quantum Chem, 2012     

When SF5 outplays CF3: effects of pentafluorosulfanyl decorated scorpionates on copper

Polyfluorinated, electron-withdrawing, and sterically demanding supporting ligands are of significant value in chemistry. Here we report the assembly and use of a bis(pyrazolyl)borate, [Ph₂B(3-(SF₅)Pz)₂]⁻ that combines all such features, and involves underutilized pentafluorosulfanyl substituents. The ethylene and carbonyl chemistry of copper(i) supported by [Ph₂B(3-(SF₅)Pz)₂]⁻, a comparison to the trifluoromethylated counterparts involving [Ph₂B(3-(CF₃)Pz)₂]⁻, as well as copper catalyzed cyclopropanation of styrene with ethyl diazoacetate and CF₃CHN₂ are presented. The results from cyclopropanation show that SF₅ groups dramatically improved the yields and stereoselectivity compared to the CF₃.

Copper–ethylene and carbonyl complexes of the newly developed [Ph₂B(3-(SF₅)Pz)₂]⁻ enable the study of ligand steric and electronic effects caused by the –SF₅ group (dubbed “super CF₃”), and a comparison to the –CF₃ bearing analogs.     

Confirmatory Analysis of Per and Polyfluoroalkyl Substances in Milk and Infant Formula Using UHPLC–MS/MS

An ultra-high performance liquid chromatography tandem mass spectrometry method was developed and validated for the sensitive determination and unambiguous confirmation of residues of per and polyfluorinated alkyl substances (PFAS) in breastmilk, retail milk and infant formulas following two sample preparation methods. Sample pre-treatment was carried out by a simplified QuEChERS method without requiring dSPE or any further clean-up. The method was validated in accordance with the requirements of Commission Decision 657/2002/EC with slight modifications. The method displayed good linearity with R² ranging from 0.9843–0.9998 for all target PFAS. The recovery and within-laboratory reproducibility of the method (n = 63) were in the range 60–121% and 5–28%, respectively. The decision limit, detection capability and limit of quantitation ranged from 30–60 ng kg⁻¹ to 40–100 ng kg⁻¹ and 5–50 ng kg⁻¹, respectively. Acceptable matrix effect values in the range −45–29% were obtained with uncertainty of measurement lower than 25% for all target PFAS. The method displays its suitability for the sensitive and high-throughput confirmatory analysis of C₄–C₁₄ PFAS in breastmilk, dairy milk and infant formulas.     

Reactivity of 4,5-Dichlorophthalic Anhydride towards Thiosemicarbazide and Amines: Synthesis,Spectroscopic Analysis,and DFT Study

The cyclic anhydrides are broadly employed in several fields, such as the chemical, plastic, agrochemical, and pharmaceutical industries. This study describes the chemical reactivity of 4,5-dichlorophthalic anhydride towards several nucleophiles, including thiosemicarbazide and different amines, to produce the carboxylic acid derivatives resulting from anhydride’s opening, namely, phthalimide and dicarboxylic acid (1–12) products. Their chemical structures are confirmed by NMR, IR and MS spectra analyses. Density–functional theory (DFT) studies are performed using (DFT/B3LYP) with the 6-311G(d, p) basis sets to recognize different chemical and physical features of the target compounds.