The reaction of uranyl ions with 4-(2-pyridylazo)resorcinol

The uranyl ion and 4-(2-pyridylazo)resorcinol (PAR) form only 1:1 chelates in solutions of pH < 8.5, UO(2),(PAR)H(+) being formed at pH > 3 and UO(2),(PAR) at pH > 5.5. Equilibrium constants and spectrophotometric data for both chelates are given. Solid, non-stoichiometric crystalline species in which the mole ratio of PAR to uranium is more than 1:1 are precipitated up to pH 6. The medium of 0.1-0.2M triethanolamine at pH 8 recommended by other workers proved satisfactory for the sensitive spectrophotometric determination of uranium, as did pH 3.6 in the presence of < 0.1M formate or 20-30% v/v dimethylformamide.     

Complexes formed in the chloroform extraction of uranium(VI) with oxine

Equilibrium distribution ratios have been determined for uranium(VI) with oxine between chloroform and 0.1M perchlorate as a function of pH and reagent concentration at 20 degrees . It is concluded that the extractable complex is UO(2)Ox(2)HOx. The equilibrium constants for the extraction of uranium have been determined as K(u,1) = [UO(2)Ox(2)HOx](0)/[UO(2)(2+)][Ox(-)](3)[H(+)] = 10(36.18) at low pH and K(U,2) = [UO(2)Ox(2)HOx](0)/[UO(2)Ox(2)OH(-)][Ox(-)][H(+)](2) = 10(25.40) at high pH.     

Aqueous coordination chemistry and photochemistry of uranyl(VI) oxalate revisited: a density functional theory study

Using density functional theory (DFT) calculations, we revisited a classical problem of uranyl(VI) oxalate photochemical decomposition. Photoreactivities of uranyl(VI) oxalate complexes are found to correlate largely with ligand-structural arrangements. Importantly, the intramolecular photochemical reaction is inhibited when oxalate is bound to uranium exclusively in chelate binding mode. Previously proposed mechanisms involving a UO(2)(C(2)O(4))(2)(2-) (1:2) complex as the main photoreactive species are thus unlikely to apply, because the two oxalic acids are bound to uranium in a chelating binding mode. Our DFT results suggest that the relevant photoreactive species are UO(2)(C(2)O(4))(3)(4-) (1:3) and (UO(2))(2)(C(2)O(4))(5)(6-) (2:5) complexes binding uranium in an unidentate fashion. These species go through decarboxylation upon excitation to the triplet state, which ensues the release of CO(2) and reduction of U(vi) to U(v). The calculations also suggest an alternative intermolecular pathway at low pH via an electron transfer between the excited state *UO(2)(2+) and hydrogen oxalate (HC(2)O(4)(-)) which eventually leads to the production of CO and OH(-) with no net reduction of U(VI). The calculated results are consistent with previous experimental findings that CO is only detected at low pH while U(IV) is detected only at high pH.     

Pyridine-2-aldoxime and 6-methylpyridine-2-aldoxime as gravimetric reagents for estimation of palladium(II) and uranium(VI)

Pyridine-2-aldoiumc (I) has been found to be a sensitive reagent for the gravimetric determination of palladium(II). From chloride medium, precipitation is complete at pH 3.0-11.0, and in solution containing 1NHNO(3) to pH6.0. The compositions of the precipitates (dried at 130 degrees ) correspond to PdL(2), and PdL(2). HNO(3) (HL representing the reagent) respectively. Pd(II) can be estimated gravimetncally in presence of acetate, oxalate, tartrate, phosphate, fluoride borate, perchlorate, Cu(II), Cd, Co(II), Fe(II), Ni, Zn, Pb, Bi, Sb(III), Pt(IV), Ir(IV), Ru(III), Rh(III); Os(IV) in quantities more than twice that of Pd(II), and Ag(I), Au(III) and Fe(II) even m traces cause serious interference. The yellow uranium(VI) complex with (I) is precipitated quantitatively over the pH range 3.5-10.5 and, after washing and drying corresponds to the composition (c(6)h(5)n(2)o)(2)uo(2), The uranium(VI) complex with 6-methylpyridine-2-aldoxime (II) is precipitated quantitatively over the pH range 3.0-10.5, and after washing and drying at 120-130 degrees corresponds to UO(2),(C(7),H(7),N(2)O)(2). Both (I) and (II) are suitable for the estimation of 1-50 mg of uranium(VI) in the presence of up to 10-fold quantities ofTh(IV), La(III) and Ce(III) even when present together. Ce(IV) in quantities more than three times that of U must be reduced to Ce(III). Tartrate, citrate, phosphate, Ti(IV) and Zr interfere, but acetate, oxalate, and borate do not.     

Determination of the equilibrium formation constants of two U(VI)-peroxide complexes at alkaline pH

The formation of uranyl-peroxide complexes was studied at alkaline media by using UV-Visible spectrophotometry and the STAR code. Two different complexes were found at a H(2)O(2)/U(VI) ratio lower than 2. A graphical method was used in order to obtain the formation constants of such complexes and the STAR program was used to refine the formation constants values because of its capacity to treat multiwavelength absorbance data and refining equilibrium constants. The values obtained for the two complexes identified were: UO(2)(2+) + H(2)O(2) + 4OH(-) UO(2)(O(2))(OH)(2)(2-) + 2H(2)O: log β°(1,1,4) = 28.1 ± 0.1 (1). UO(2)(2+) + 2H(2)O(2) + 6OH(-) UO(2)(O(2))(2)(OH)(2)(4-) + 4H(2)O: log β°(1,2,6) = 36.8 ± 0.2 (2). At hydrogen peroxide concentrations higher than 10(-5) mol dm(-3), and in the absence of carbonate, the UO(2)(O(2))(2)(OH)(2)(4-) complex is predominant in solution, indicating the significant peroxide affinity of peroxide ions for uranium and the strong complexes of uranium(VI) with peroxide.     

A theoretical study of the structure of tricarbonatodioxouranate

The results of a study on the ground states of tricarbonato complexes of dioxouranate using multiconfigurational second-order perturbation theory (CASSCF/CASPT2) are presented. The equilibrium geometries of the complexes corresponding to uranium in the formal oxidation states VI and V, [UO(2)(CO(3))(3)](4)(-) and [UO(2)(CO(3))(3)],(5)(-) have been fully optimized in D(3)(h)() symmetry at second-order perturbation theory (MBPT2) level of theory in the presence of an aqueous environment modeled by a reaction field Hamiltonian with a spherical cavity. The uranyl fragment has also been optimized at CASSCF/CASPT2, to obtain an estimate of the MBPT2 error. Finally, the effect of distorting the D(3)(h)() symmetry to C(3) has been investigated. This study shows that only minor geometrical rearrangements occur in the one-electron reduction of [UO(2)(CO(3))(3)](4)(-) to [UO(2)(CO(3))(3)],(5)(-) confirming the reversibility of this reduction.     

Sorption profile and chromatographic separation of uranium (VI) ions from aqueous solutions onto date pits solid sorbent

The retention profile of uranium (VI) as uranyl ions (UO(2)(2+)) from the aqueous media onto the solid sorbent date pits has been investigated. The sorption of UO(2)(2+) ions onto the date pits was achieved quantitatively (98+/-3.4%, n=5) after 15 min of shaking at pH 6-7. The sorption of UO(2)(2+) onto the used sorbent was found fast, followed by a first order rate equation with an overall rate constant, k of 4.8+/-0.05 s(-1). The sorption data were explained in a manner consistent with a "solvent extraction" mechanism. The sorption data were also subjected to Freundlich isotherm model over a wide range of equilibrium concentration (1-20 microgmL(-1)) of UO(2)(2+). The results revealed that, a "dual-mode" of sorption mechanism involving absorption related to "solvent extraction" and an added component for "surface adsorption" is most likely operated simultaneously for uranyl ions uptaking the solid sorbent. The thermodynamic parameters (-DeltaH, DeltaS and DeltaG) of the uranyl ions uptake onto the date pits indicated that, the process is endothermic and proceeds spontaneously. The interference of some diverse ions on the sorption UO(2)(2+) from the aqueous media onto the date pits packed column was critically investigated and the data revealed quantitative collection of UO(2)(2+) at 5 mLmin(-1) flow rate. The retained UO(2)(2+) was recovered quantitatively with HCl (3.0 molL(-1)) from the column at 5 mLmin(-1) flow rate. The mode of binding of the date pits with UO(2)(2+) was determined from the IR spectral date bits before and after extraction of uranium (VI). The height equivalent (HETP) and the number (N) of theoretical plates of the date pits packed column were determined from the chromatograms. Complete retention and recovery of UO(2)(2+) spiked to wastewater samples by the date pits packed column was successfully achieved. The capacity of the used sorbent towards retention of uranium (VI) from aqueous solutions was much better than the most common sorbents.     

Polarography of uranium(VI) and lead(II) complexes with l-glutamine

The complexes of uranium(VI) and lead(II) with 1-glutamine were investigated polarographically. For uranium(VI), the complexes UO(2)G(+2), UO(2)G(2)(+2) and UO(2)(OH)Ga(2)(+) were identified at pH < 2.5, pH 2.5-4.1 and pH 4.1-5.2 respectively. With lead(II), complexes PbG(+2), Pb(OH)G(+) and Pb(OH)G(2)(+) were formed at pH 2.0-5.0, pH 5.0-7.0, and pH 7.0-8.5, respectively. The concentration dissociation constant of Pb(OH)G(2)(+) was found to be pK(c) = 10.16 +/- 0.04 at ionic strength 0.6.     

Determination of transition and rare earth elements in low-alloy steels as chelates with 4-(2-Thiazolylazo)resorcinol by reversed-phase high performance liquid chromatography

4-(2-Thiazolylazo)resorcinol (TAR) is used as a chelating reagent in the reversed-phase HPLC separation and determination of transition and rare earth elements in low-alloy steels. A precolumn derivatization method is used, followed by separation on an octadecyl-bonded silica stationary phase with a sodium octane-1-sulphonate-tartaric acid mobile phase. The eluted metal chelates are detected by uv-visible spectrophotometry. The requirements for sample preparation, characterization of precolumn derivatization and the optimum conditions for the sensitive detection of metal ions after liquid chromatography (LC) separation are discussed. The influence of the pH of the chelating medium and the eluent, the concentration of TAR and the eluent were investigated. The results are compared with those of other methods such as atomic absorption spectrometry (AAS) and inductively coupled plasma atomic emission spectrometry (ICP-AES).     

The application of novel hydrophobic ionic liquids to the extraction of uranium(VI) from nitric acid medium and a determination of the uranyl complexes formed

Novel ammonium based hydrophobic ionic liquids (ILs) have been synthesised and characterised, and their use in the liquid-liquid extraction of uranium(VI) from an aqueous nitric acid solution using tri-n-butyl phosphate (TBP), studied. On varying the nitric acid concentration, each IL was found to give markedly different results. Relatively hydrophilic ILs showed high uranium(VI) extractability at 0.01 M nitric acid solution which progressively decreased from 0.01 to 2 M HNO(3) and then increased again as the nitric acid concentration was increased to 6 M. An analysis of the mechanisms involved for one such IL, pointed to cationic-exchange being the predominant route at low nitric acid concentrations whilst at high nitric acid concentrations, anionic-exchange predominated. Strongly hydrophobic ILs showed low extractability for nitric acid concentrations below 0.1 M but increasing extractability from 0.1 M to 6 M nitric acid. The predominant mechanism in this case involved the partitioning of a neutral uranyl complex. The uranyl complexes were found to be UO(2)(2+)·(TBP)(3) for the cationic exchange mechanism, UO(2)(NO(3))(2)(TBP)(2) for the neutral mechanism and UO(2)(NO(3))(3)(-)·(TBP) for the anionic exchange mechanism.     

Complexation of uranium(VI) and samarium(III) with oxydiacetic acid: temperature effect and coordination modes

The complexation of uranium(VI) and samarium(III) with oxydiacetate (ODA) in 1.05 mol kg(-1) NaClO(4) is studied at variable temperatures (25-70 degrees C). Three U(VI)/ODA complexes (UO(2)L, UO(2)L(2)(2-), and UO(2)HL(2)(-)) and three Sm(III)/ODA complexes (SmL(j)((3-2)(j)+) with j = 1, 2, 3) are identified in this temperature range. The formation constants and the molar enthalpies of complexation are determined by potentiometry and calorimetry. The complexation of uranium(VI) and samarium(III) with oxydiacetate becomes more endothermic at higher temperatures. However, the complexes become stronger due to increasingly more positive entropy of complexation at higher temperatures that exceeds the increase in the enthalpy of complexation. The values of the heat capacity of complexation (Delta C(p) degrees in J K(-1) mol(-1)) are 95 +/- 6, 297 +/- 14, and 162 +/- 19 for UO(2)L, UO(2)L(2)(2-), and UO(2)HL(2)(-), and 142 +/- 6, 198 +/- 14, and 157 +/- 19 for SmL(+), SmL(2)(-), and SmL(3)(3-), respectively. The thermodynamic parameters, in conjunction with the structural information from spectroscopy, help to identify the coordination modes in the uranium oxydiacetate complexes. The effect of temperature on the thermodynamics of the complexation is discussed in terms of the electrostatic model and the change in the solvent structure.     

Excision of uranium oxide chains and ribbons in the novel one-dimensional uranyl iodates K(2)[(UO(2))3(IO(3))(4)O(2)] and Ba[(UO(2)2(IO(3))(2)O(2)](H(2)O)

The alkali metal and alkaline-earth metal uranyl iodates K(2)[(UO(2))(3)(IO(3))(4)O(2)] and Ba[(UO(2))(2)(IO(3))(2)O(2)](H(2)O) have been prepared from the hydrothermal reactions of KCl or BaCl(2) with UO(3) and I(2)O(5) at 425 and 180 degrees C, respectively. While K(2)[(UO(2))(3)(IO(3))(4)O(2)] can be synthesized under both mild and supercritical conditions, the yield increases from <5% to 73% as the temperature is raised from 180 to 425 degrees C. Ba[(UO(2))(2)(IO(3))(2)O(2)](H(2)O), however, has only been isolated from reactions performed in the mild temperature regime. Thermal measurements (DSC) indicate that K(2)[(UO(2))(3)(IO(3))(4)O(2)] is more stable than Ba[(UO(2))(2)(IO(3))(2)O(2)](H(2)O) and that both compounds decompose through thermal disproportionation at 579 and 575 degrees C, respectively. The difference in the thermal behavior of these compounds provides a basis for the divergence of their preparation temperatures. The structure of K(2)[(UO(2))(3)(IO(3))(4)O(2)] is composed of [(UO(2))(3)(IO(3))(4)O(2)](2)(-) chains built from the edge-sharing UO(7) pentagonal bipyramids and UO(6) octahedra. Ba[(UO(2))(2)(IO(3))(2)O(2)](H(2)O) consists of one-dimensional [(UO(2))(2)(IO(3))(2)O(2)](2)(-) ribbons formed from the edge sharing of distorted UO(7) pentagonal bipyramids. In both compounds the iodate groups occur in both bridging and monodentate binding modes and further serve to terminate the edges of the uranium oxide chains. The K(+) or Ba(2+) cations separate the chains or ribbons in these compounds forming bonds with terminal oxygen atoms from the iodate ligands. Crystallographic data: K(2)[(UO(2))(3)(IO(3))(4)O(2)], triclinic, space group P_1, a = 7.0372(5) A, b = 7.7727(5) A, c = 8.9851(6) A, alpha = 93.386(1) degrees, beta = 105.668(1) degrees, gamma = 91.339(1) degrees, Z = 1; Ba[(UO(2))(2)(IO(3))(2)O(2)](H(2)O), monoclinic, space group P2(1)/c, a = 8.062(4) A, b = 6.940(3) A, c = 21.67(1), beta= 98.05(1) degrees, Z = 4.     

Synthesis of a uranium(VI)-carbene: reductive formation of uranyl(V)-methanides, oxidative preparation of a [R2C═U═O]2+ analogue of the [O═U═O]2+ uranyl ion (R = Ph2PNSiMe3), and comparison of the nature of U(IV)═C, U(V)═C, and U(VI)═C double bonds

We report attempts to prepare uranyl(VI)- and uranium(VI) carbenes utilizing deprotonation and oxidation strategies. Treatment of the uranyl(VI)-methanide complex [(BIPMH)UO(2)Cl(THF)] [1, BIPMH = HC(PPh(2)NSiMe(3))(2)] with benzyl-sodium did not afford a uranyl(VI)-carbene via deprotonation. Instead, one-electron reduction and isolation of di- and trinuclear [UO(2)(BIPMH)(μ-Cl)UO(μ-O){BIPMH}] (2) and [UO(μ-O)(BIPMH)(μ(3)-Cl){UO(μ-O)(BIPMH)}(2)] (3), respectively, with concomitant elimination of dibenzyl, was observed. Complexes 2 and 3 represent the first examples of organometallic uranyl(V), and 3 is notable for exhibiting rare cation-cation interactions between uranyl(VI) and uranyl(V) groups. In contrast, two-electron oxidation of the uranium(IV)-carbene [(BIPM)UCl(3)Li(THF)(2)] (4) by 4-morpholine N-oxide afforded the first uranium(VI)-carbene [(BIPM)UOCl(2)] (6). Complex 6 exhibits a trans-CUO linkage that represents a [R(2)C═U═O](2+) analogue of the uranyl ion. Notably, treatment of 4 with other oxidants such as Me(3)NO, C(5)H(5)NO, and TEMPO afforded 1 as the only isolable product. Computational studies of 4, the uranium(V)-carbene [(BIPM)UCl(2)I] (5), and 6 reveal polarized covalent U═C double bonds in each case whose nature is significantly affected by the oxidation state of uranium. Natural Bond Order analyses indicate that upon oxidation from uranium(IV) to (V) to (VI) the uranium contribution to the U═C σ-bond can increase from ca. 18 to 32% and within this component the orbital composition is dominated by 5f character. For the corresponding U═C π-components, the uranium contribution increases from ca. 18 to 26% but then decreases to ca. 24% and is again dominated by 5f contributions. The calculations suggest that as a function of increasing oxidation state of uranium the radial contraction of the valence 5f and 6d orbitals of uranium may outweigh the increased polarizing power of uranium in 6 compared to 5.     

Synthesis, structural and computational investigations of UO2I42-: a structurally characterized U(VI)-I anion

The synthesis and characterization of (Ph(4)P)(2)UO(2)I(4).2NCCH(3) is reported. The UO(2)I(4)(2-) anion is not only the first unambiguously characterized anion containing a uranium(VI)-iodine bond, but is also the last member of the UO(2)X(4)(2-) (X = Cl, Br, I) series to be unambiguously identified and structurally characterized, in contrast to salts of the UO(2)Cl(4)(2-) and UO(2)Br(4)(2-) anions, which have all been thoroughly investigated and structurally characterized. (Ph(4)P)(2)UO(2)I(4).2NCCH(3) was characterized using IR, Raman, (1)H, (13)C, and (31)P NMR spectroscopy as well as X-ray diffraction. In addition, a computational investigation of the UO(2)I(4)(2-) anion was undertaken and compared with the experimentally observed structure.     

Probing the local coordination environment and nuclearity of uranyl(VI) complexes in non-aqueous media by emission spectroscopy

We describe the synthesis, solid state and solution properties of two families of uranyl(VI) complexes that are ligated by neutral monodentate and anionic bidentate P=O, P=NH and As=O ligands bearing pendent phenyl chromophores. The uranyl(VI) ions in these complexes possess long-lived photoluminescent LMCT (3)Π(u) excited states, which can be exploited as a sensitive probe of electronic structure, bonding and aggregation behaviour in non-aqueous media. For a family of well defined complexes of given symmetry in trans-[UO(2)Cl(2)(L(2))] (L = Ph(3)PO (1), Ph(3)AsO (2) and Ph(3)PNH (3)), the emission spectral profiles in CH(2)Cl(2) are indicative of the strength of the donor atoms bound in the equatorial plane and the uranyl bond strength; the uranyl LMCT emission maxima are shifted to lower energy as the donor strength of L increases. The luminescence lifetimes in fluid solution mirror these observations (0.87-3.46 μs) and are particularly sensitive to vibrational and bimolecular deactivation. In a family of structurally well defined complexes of the related anion, tetraphenylimidodiphosphinate (TPIP), monometallic complexes, [UO(2)(TPIP)(thf)] (4), [UO(2)(TPIP)(Cy(3)PO)] 5), a bimetallic complex [UO(2)(TPIP)(2)](2) (6) and a previously known trimetallic complex, [UO(2)(TPIP)(2)](3) (7) can be isolated by variation of the synthetic procedure. Complex 7 differs from 6 as the central uranyl ion in 7 is orthogonally connected to the two peripheral ones via uranyl → uranium dative bonds. Each of these oligomers exhibits a characteristic optical fingerprint, where the emission maxima, the spectral shape and temporal decay profiles are unique for each structural form. Notably, excited state intermetallic quenching in the trimetallic complex 7 considerably reduces the luminescence lifetime with respect to the monometallic counterpart 5 (from 2.00 μs to 1.04 μs). This study demonstrates that time resolved and multi-parametric luminescence can be of value in ascertaining solution and structural forms of discrete uranyl(VI) complexes in non-aqueous solution.     

The effects of hydrofluoric acid addition on the hydrothermal synthesis of templated uranium sulfates

The effect of employing hydrofluoric acid as a mineraliser in the formation of organically templated uranium sulfate materials has been studied. Variable amounts of HF((aq)) were added to a series of reaction gels in which all other reactant concentrations were invariant, resulting in the formation of three different phases, depending upon the fluoride concentration. Two of these phases are novel; [N(2)C(4)H(14)][UO(2)(H(2)O)(SO(4))(2)] is a new templated uranium sulfate, containing anionic [UO(2)(H(2)O)(SO(4))(2)](2-) chains that hydrogen bond to one-another forming pseudo-layers, and [N(2)C(4)H(14)][UO(2)F(SO(4))](2) is the first example of a templated uranium sulfate fluoride, which consists of uranium fluoride chains linked by sulfate groups to form [UO(2)F(SO(4))](-) layers. The role of F(-) in these reactions is two-fold; it acts as a mineraliser when present in small concentrations, while it is incorporated into the reaction product when present in larger mole fractions. Both of the new materials have been characterised using a range of physical techniques including single crystal X-ray structure analysis.     

Evidence for the formation of UO2(NO3)4(2-) in an ionic liquid by EXAFS

The complexation between uranium(vi) and nitrate ions in a hydrophobic ionic liquid (IL), namely [BMI][NO(3)] (BMI = 1-butyl-3-methylimidazolium(+)), is investigated by EXAFS spectroscopy. It was performed by dissolution of uranyl nitrate UO(2)(NO(3))(2)·6H(2)O or UO(2)(Tf(2)N)(2) (Tf(2)N = bis(trifluoromethylsulfonyl)imide (CF(3)SO(2))(2)N(-)). The formation of the complex UO(2)(NO(3))(4)(2-) is evidenced.     

The synergistic extraction of thorium(IV) and uranium(VI) with mixtures of 3-phenyl-4-benzoyl-5-isoxazolone and crown ethers

The extraction of thorium(IV) and uranium(VI) from nitric acid solutions has been studied using mixtures of 3-phenyl-4-benzoyl-5-isoxazolone (HPBI) and dicyclohexano-18-crown-6, benzo-18-crown-6, dibenzo-18-crown-6 or benzo-15-crown-5. The results demonstrate that these metal ions are extracted into chloroform as Th(PBI)(4) and UO(2)(PBI)(2) with HPBI alone and as Th(PBI)(4) . CE and UO(2)(PBI)(2) . CE in the presence of crown ethers (CE). The equilibrium constants of the above species have been deduced by non-linear regression analysis. The addition of a CE to the metal chelate system enhances the extraction efficiency and also improves the selectivities between thorium and uranium. IR spectral data of the extracted complexes were used to further clarify the nature of the complexes. The binding to the CEs by Th(PBI)(4) and UO(2)(PBI)(2) follows the CE basicity sequence but with DC18C6 and DB18C6, steric effects become more important.     

Reaction of gallium and indium with 4-(2-Thiazolylazo) resorcinol

Gallium is shown to react with TAR to form 1:1 and 1:2 Ga:TAR species, elucidation of the nature of which is complicated by hydrolysis. The species GaR(+) and GaHR(OH)(+), where H(2)R is the free reagent, occur at pH 2.7-4.8 for solutions that are equimolar or contain excess of metal ion; GaHR(2+) occurs at pH 2.13-2.86 with excess of metal ion. A 1:2 complex, probably GaR(2)(-), exists in 30% aqueous ethanol medium at pH approximately 5 if excess of ligand is present. The utility of the reaction for analysis is severely limited by the large number of interfering elements. Indium reacts similarly, forming a In RH(2+) complex which is converted into the 1:2 complex by excess of reagent at pH 4.6.     

Spectrophotometric determination of iron with 1-hydroxy-4-sulpho-2-naphthoic acid

1-Hydroxy-4-sulpho-2-naphthoic acid (H(3)L) is proposed as a spectrophotometric reagent for determination of iron. It gives a red-brown chelate, FeL(6-)(3), with lambda(max) 500-520 nm at pH 8 ( = 3.3 x 10(3) l. mole(-1). cm(-1)). In this wavelength region the reagent has no absorption. Most common cations and oxo-anions do not interfere. In the determination of iron in polymetallic iron ores and aluminium alloys the relative error and relative standard deviation of the method were found to be better than 1 and 0.5%, respectively. 1-Hydroxy-4-sulpho-2-naphthoic acid seems to be a more sensitive and accurate reagent for iron than 5-sulphosalicylic acid, and the number of interfering ions is smaller than in the 1,10-phenanthroline or thiocyanate methods.