Systematic study of the solvent extraction of metal oxinates

The extraction of 32 metals (Be, Mg, Ca, Sr, Ba, Sc, La, Ti, Zr, Th, V, Nb, Cr, Mo, W, U, Mn, Fe, Co, Ni, Pd, Cu, Ag, Zn, Cd, Hg, Al, Ga, In, Tl, Pb and Bi) with oxine solution has been studied. The effects of pH, oxine concentration and water-soluble complexing agents (oxalic acid, tartaric acid, hydrocyanic acid, nitrilotriacetic acid, ethylenediaminetetraacetic acid and 1,2-diaminocyclohexanetetraacetic acid) have been investigated. From these results the extraction constants and stability constants ot the metal complexes with the various complexing agents investigated have been calculated.     

Mass spectrometry studies of organolead compounds

The mass spectra of alkyl‐, aryl‐ and chlorinated ‐alkyl, aryl organolead compounds were investigated. Positive and negative ion mass spectra of these compounds were recorded using conventional electron impact conditions. In common with the analogous tetraalkyltin and tetraalkylgermanium compounds, tetrabutyllead produced no negative ion spectra under these conditions. The spectra were also examined by tandem mass spectrometry in order to establish reaction mechanisms for these compounds. Fragmentation patterns of seven organolead compounds, based on precursor–product ion relationships, are proposed. Copyright © 2001 John Wiley & Sons, Ltd.     

Mass spectrometry of metal chelates-I Detection on the picogram scale

A method has been developed for the detection and estimation of metals in the form of chelates in amounts down to 10(-12) g. The chelate is evaporated into the source of a mass spectrometer and a continuous record of the ion current at a significant mass number is made. The integrated ion current is directly proportional to the concentration of metal chelate.     

Mass spectrometric studies of dithiophosphinato metal complexes

Electron impact induced fragmentation reactions of planar, tetrahedral, octahedral and oligomeric metal dithiophosphinates Me(II)L₂ (L=Et₂PS₂^?; Me(II)=Zn, Cd, Hg, Pb, Co, Mn, Ni, Pd, Pt), Me(III)L₃ (Me(III) = Sb, Bi, In, Rh, Ir) and (Me(I)I)_n (Me(I)/n=Tl/1, Au/2, Cu/4) have been studied. Fragmentation patterns, which are in accordance with metastable peak determinations by linked scans, are reported. In the case of the transition metals the spectra of the complexes show abundant [M]^+· predominantly metal containing ions and, the former being weak and the intensities of the latter being considerably reduced in the case of metal complexes with filled d shells. With planar or tetrahedral transition metal complexes no dependence of fragmentation on the coordination geometry can be observed. The dependence of fragmentation on d configuration, ionization energy of the metal and metal ligand π bonding is discussed. In the case of the oligomeric complexes strong metal-metal interaction is observed even under electron impact.     

Comparison between thermal analysis and mass spectroscopic studies of uranyl oxinates

The 5,7-dichloro, 5,7-dibromo, 5,7-diiodo and 5,6-dinitro derivatives of oxine (ligandsL ₁,–L ₄) were used to prepare uranyl chelates (A ₁–A ₄). Thermal analysis (DTA) and mass spectroscopic studies were performed. The stoichiometries of the chelates were determined by elemental analysis, molecular weight determination applying an -spectroscopic liquid scintillation counter and mass spectral measurements. The uranylligand ratios were found to be 11 for A₁, 13 for A₂, 12 (monohydrate) for A₃, and 12 forA ₄. The correlation between the thermal analysis and mass spectra was examined. The activation energy required for each step of thermal degradation of the ligands and chelates was calculated. The natures of most of the molecular ions obtained in the mass spectra were also explained.     

Adsorption behaviour of some metal ions and their oxinates on Zeokarb-226

Summary To develop a preconcentration technique for trace elements in aqueous solution, the adsorption behaviour of some metal ions and their oxinates on a weak carboxylic acid resin (Zeokarb-226) in the H⁺ form was investigated. Results indicate that under the conditions of the experiment, the resin behaves like a chelating ion-exchanger and that by selecting appropriate conditions, a group of ions such as U(VI), Th(IV), Pb(II), Hg(II), Fe(III) may be separated from many other ions.

---

Adsorptionsverhalten einiger Metallionen und ihrer Oxinate an Zeokarb-226

Zusammenfassung Das Adsorptionsverhalten einiger Metallionen und ihrer Oxinate an dem schwachen Carbonsäureharz Zeokarb-226 (H⁺-Form) wurde untersucht, um ein Anreicherungsverfahren für Spurenelemente in wäßriger Lösung zu entwickeln. Die Ergebnisse zeigen, daß sich das Harz unter den gegebenen Bedingungen als Chelataustauscher verhält und geeignet ist für die selektive Anreicherung von z.B. U(VI), Th(IV), Pb(II), Hg(II) und Fe(III).

     

Mass spectrometry in structural studies of diterpene alkaloids

Data on the use of electron impact mass spectrometry for the determination of the structures of diterpene alkaloids are surveyed and described systematically. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 6, pp. 1096–1104, June, 1997.     

Mass spectrometry based proteomic studies on viruses and hosts--a review

In terms of proteomic research in the 21st century, the realm of virology is still regarded as an enormous challenge mainly brought by three aspects, namely, studying on the complex proteome of the virus with unexpected variations, developing more accurate analytical techniques as well as understanding viral pathogenesis and virus–host interaction dynamics. Progresses in these areas will be helpful to vaccine design and antiviral drugs discovery. Mass spectrometry based proteomics have shown exceptional display of capabilities, not only precisely identifying viral and cellular proteins that are functionally, structurally, and dynamically changed upon virus infection, but also enabling us to detect important pathway proteins. In addition, many isolation and purification techniques and quantitative strategies in conjunction with MS can significantly improve the sensitivity of mass spectrometry for detecting low-abundant proteins, replenishing the stock of virus proteome and enlarging the protein–protein interaction maps. Nevertheless, only a small proportion of the infectious viruses in both of animal and plant have been studied using this approach. As more virus and host genomes are being sequenced, MS-based proteomics is becoming an indispensable tool for virology. In this paper, we provide a brief review of the current technologies and their applications in studying selected viruses and hosts.     

Mass spectrometry studies on meso-substituted corroles and their photochemical decomposition products

Corroles, ring-contracted analogs of porphyrins, are an important class of compounds which have attracted the attention of many researchers in the fields of organic, coordination and physical chemistry. In the present work, the stability and the decomposition pathways of a diverse set of meso-substituted corroles have been studied using mass spectrometry (MS), UV-Vis absorption and preparative methods combined with NMR spectroscopy. Four different ionization methods (electrospray ionization, field desorption, atmospheric pressure photoionization and atmospheric pressure chemical ionization) were utilized to investigate light- and oxygen-induced decomposition in various solvents. It was found that the rate of decomposition in MeCN is significantly higher than in CH(2)Cl(2), hexane, MeOH and ethyl acetate. HR-MS combined with CID-MS/MS enabled us to identify the products of initial decomposition. Surprisingly, numerous smaller open-chain compounds were also detected. Large-scale decomposition of a corrole bearing sterically hindered substituents at positions 5 and 15 allowed us to isolate mg quantities of three decomposition products: isocorrole and isomeric biliverdin-type species. These are formed as a result of oxygen attack on the meso-10 position.     

Mass spectrometry as test bench for medicinal chemistry studies

This review describes how mass spectrometry can be used as a powerful test bench to obtain information on the biological activity of target compounds. Considering that mass spectrometry is based on the chemical reactivity of the analytes, it is possible to investigate the stability of the active compounds, to predict their behaviour in the environment of interest, and to obtain structure–reactivity relationships for new molecules of pharmacological interest. Electron ionization and metastable ion studies give evidence of the correlation between the mutagenic properties of a series of aryl and heteroaryl triazenes and mass spectrometric data. A linear relationship between the energetics of C(O)–O bond cleavage of some carbamic acid O-aryl esters and their FAAH inhibition activity has been proved by electrospray-ionization ion-trap mass spectrometry. An inverse correlation between the stability and cytotoxic activity of some copper complexes has been clearly established by electrospray-ionization mass spectrometry. Moreover, because of the sensitivity and specificity of mass spectrometry, it has been possible to determine and characterize impurities that in some cases can be the real bioactive compound.     

Mass spectrometric studies of alkali metal ion binding on thrombin-binding aptamer DNA

The binding sites and consecutive binding constants of alkali metal ions, (M⁺ = Na⁺, K⁺, Rb⁺, and Cs⁺), to thrombin-binding aptamer (TBA) DNA were studied by Fourier-transform ion cyclotron resonance spectrometry. TBA-metal complexes were produced by electrospray ionization (ESI) and the ions of interest were mass-selected for further characterization. The structural motif of TBA in an ESI solution was checked by circular dichroism. The metal-binding constants and sites were determined by the titration method and infrared multiphoton dissociation (IRMPD), respectively. The binding constant of potassium is 5–8 times greater than those of other alkali metal ions, and the potassium binding site is different from other metal binding sites. In the 1:1 TBA-metal complex, potassium is coordinated between the bottom G-quartet and two adjacent TT loops of TBA. In the 1:2 TBA—metal complex, the second potassium ion binds at the TGT loop of TBA, which is in line with the antiparallel G-quadruplex structure of TBA. On the other hand, other alkali metal ions bind at the lateral TGT loop in both 1:1 and 1:2 complexes, presumably due to the formation of ion-pair adducts. IRMPD studies of the binding sites in combination with measurements of the consecutive binding constants help elucidate the binding modes of alkali metal ions on DNA aptamer at the molecular level.     

Structural studies of metal ligand complexes by ion mobility-mass spectrometry

Collision cross sections (CCS) have been measured for three salen ligands, and their complexes with copper and zinc using travelling-wave ion mobility-mass spectrometry (TWIMS) and drift tube ion mobility-mass spectrometry (DTIMS), allowing a comparative size evaluation of the ligands and complexes. CCS measurements using TWIMS were determined using peptide and TAAH calibration standards. TWIMS measurements gave significantly larger CCS than DTIMS in helium, by 9 % for TAAH standards and 3 % for peptide standards, indicating that the choice of calibration standards is important in ensuring the accuracy of TWIMS-derived CCS measurements. Repeatability data for TWIMS was obtained for inter- and intra-day studies with mean RSDs of 1.1 % and 0.7 %, respectively. The CCS data obtained from IM-MS measurements are compared to CCS values obtained via the projection approximation, the exact hard spheres method and the trajectory method from X-ray coordinates and modelled structures using density functional theory (DFT) based methods.     

Further studies on reactions of organic halides with disilanes catalysed by transition metal complexes

The interaction of a range of organic halides with (Cl₃Si)₂ or (Me₃Si)₂ in the presence of a variety of transition metal catalysts (very predominantly Pd⁰ or Pd^II complexes) have been examined. PhSiMe₃ was formed from PhCl[m.y., 15%] (m.y. - maximum yield), PhBr (m.y., 92%, with [PdL₂Br₂] as catalyst (L - PPh₃)), and (contrary to earlier reports) PhI (m.y. 51%, with [PdL₂I₂]). MeSiCl₃ was formed from MeBr (m.y., 78% with [PdL₄]) and MeI (m.y., 91% with [PdL₄]), and EtSiCl₃ from EtBr (m.y., 49%, with [PdL₂“Br₂]; L” - P(C₆H₄OMe-p)₃) and EtI (m.y. 45%, with [PdL₄]). Me₄Si was satisfactorily formed from MeBr (m.y. 42%, with [PdL₄]). Evidence was obtained for the formation of Me₃SiCF₃ from CF₃I. Very poor yields of XC₆H₄CH₂SiMe₃ were obtained from XC₆H₄CH2Br (X - H orp-Me) (with X - H some PhSiMe₃ was formed), butp-O₂NC₆H₄CH₂SiMe₃ was formed in 48% yield fromp-O₂NC₆H₄CH₂Cl with [PdL“₄] as catalyst. PhCOSiMe₃ was formed from PhCOCl (m.y. 52% with [PdL₂I₂]. The nickel complex [NiL₄] was moderately effective as a catalyst for reactions between (Cl₃Si)₂ and MeBr, EtBr, or PhCH₂Br. The new complex [PdL₂(SiCl₃)₂] was prepared by treatment of [PdL₄] with (Cl₃Si)₂ or Cl₃SiH, and shown to catalyse the reaction between MeBr and (Cl₃Si)₂.