Photochemistry of the three carboxypyridines in water: a pH dependent reaction

The photochemistry of ortho, meta and para-carboxypyridines (pK(a)(1)= 1.0-2.1 and pK(a)(2)= 4.7-5.3) in aqueous medium was studied by laser-flash photolysis and product studies. At pH < pK(a)(1), hydroxylated compounds are produced with low quantum yields. Within the pH range 4-7, ortho and meta isomers undergo dimerization together with decarboxylation with a quantum yield showing a very sharp maximum around pK(a)(2)([small phi](max)= 0.09 and 0.01, respectively) while the para isomer is photostable. End-of-pulse transients assigned to triplet states were detected by laser-flash photolysis at pH < pK(a)(1) and pH > 4. Additionally, the carboxypyridinyl radicals were detected as secondary intermediates at pH < pK(a)(1) and 4 < pH < 7 and the OH-adduct radicals at pH < pK(a)(1). This is in favour of an electron transfer reaction between triplet and starting compound producing a charge transfer species. The radical anion would escape as carboxypyridinyl radical while the radical cation may add water at pH < pK(a)(1) yielding the OH-adduct radical or may undergo decarboxylation at pH > 4. The high quantum yield of phototransformation of the ortho isomer at pH > 4 is due to an easy decarboxylation process. A reaction scheme is proposed accounting for the dependences of [small phi] on both the pH and the carboxypyridines concentration. This study points out the distinct pattern of reactivity of carboxypyridines depending on the ionisation state of starting compounds and isomeric substitution.     

Modeling Pb(II) adsorption onto sandy loam soil

The adsorption of Pb(II) onto hydrous sandy loam soil was investigated with batch equilibrium adsorption experiments. Results show that the amount of Pb(II) adsorbed increases with increasing pH and surface loading. It was demonstrated that the surface acidity of the soil could be determined using electrophoretic mobility measurements. The surface acidity constants, pK(a1)(int) and pK(a2)(int), were 1.57 and 3.43, respectively. A surface complex formation model (SCFM) was employed to describe the adsorption. The intrinsic stability constants, pK(i)(s), for the surface reaction between the Pb species and the ionized soil surface hydroxyl groups were determined from SCFM fitting. The adsorption free energy of Pb2+ and Pb(OH)+ ions ranges from -5.74 to -6.48 kcal/mol and from -9.68 to -10.00 kcal/mol, respectively, for surface loadings between 1.21 x 10(-5) and 2.41 x 10(-4) mol/g. The adsorption binding calculation indicated that the specific chemical interaction is the major mechanism responsible for the adsorption process.     

Polarography of uranium(VI) and lead(II) complexes with l-glutamine

The complexes of uranium(VI) and lead(II) with 1-glutamine were investigated polarographically. For uranium(VI), the complexes UO(2)G(+2), UO(2)G(2)(+2) and UO(2)(OH)Ga(2)(+) were identified at pH < 2.5, pH 2.5-4.1 and pH 4.1-5.2 respectively. With lead(II), complexes PbG(+2), Pb(OH)G(+) and Pb(OH)G(2)(+) were formed at pH 2.0-5.0, pH 5.0-7.0, and pH 7.0-8.5, respectively. The concentration dissociation constant of Pb(OH)G(2)(+) was found to be pK(c) = 10.16 +/- 0.04 at ionic strength 0.6.     

Heme-Peptide Models for Hemoproteins. 1. Solution Chemistry of N-Acetylmicroperoxidase-8

An improved method for the preparation of the heme octapeptide acetyl-MP8, obtained by proteolysis of horse heart cytochrome c, is described. AcMP8 obeys Beer's law at pH 7.0 in aqueous solution up to a concentration of 3 x 10(-)(5) M. The self-association constant measured at 25 degrees C (log K(D) = 4.04) is an order of magnitude lower than that for MP8, reflecting the role of the N-acetyl protecting group in abolishing intermolecular coordination. However, AcMP8 does form pi-stacked dimers in aqueous solution with increasing ionic strength. A more weakly packed pi-pi dimer reaches a maximum abundance at approximately 3 M ionic strength, but a more tightly packed dimer is favored at &mgr; > 3 M. An equilibrium model based on charge neutralization by specific binding of Na(+) ions gives a total molecular charge of 3- for AcMP8 at pH 7.0 and a self-association constant log K(D) = 4.20. AcMP8 exhibits six spectroscopically active pH-dependent transitions. The Glu-21 c-terminal carboxylate binds to the heme iron at low pH (pK(a) = 2.1) but is substituted by His-18 (pK(a) = 3.12) as the pH increases. The two heme propanoic acid substituents ionize with pK(a)'s of 4.95 and 6.1. This is followed by ionization of iron-bound water with a pK(a) = 9.59, DeltaH = 48 +/- 1 kJ mol(-)(1), and DeltaS = -22 +/- 3 J K(-)(1) mol(-)(1). The electronic spectra indicate that AcMP8 is predominantly in the S = (5)/(2) state at pH 7.0, while the hydroxo complex at pH 10.5 corresponds to an equilibrium mixture of S = (5)/(2) and S = (1)/(2) states at 25 degrees C. In the final transition, His-18 ionizes to form the S = (1)/(2) histidinate complex with a pK(a) of 12.71. AcMP8 is relatively stable under alkaline conditions, dimerizing slowly at high pH (k = 2.59 +/- 0.14 M(-)(1) s(-)(1)) to form a high-spin &mgr;-oxo-bridged species. The pH-dependent behavior of AcMP8 in the presence of excess 3-cyanopyridine, however, is markedly different. At low pH, AcMP8 simultaneously binds the exogenous ligand and the Glu-21 c-terminal carboxylate with a pK(a) < 2. His-18 replaces the carboxylate ligand at higher pH (pK(a) = 2.60), and both heme propanoic acid groups ionize with a mean pK(a) = 5.10. Unlike AcMP8.OH(-), the axial histidine of the 3-CNPy complex ionizes at near neutral pH (pK(a) = 7.83), prior to being replaced by OH(-) (pK(a) = 10.13). The sixth transition in the AcMP8/3-CNPy system produces the bis(hydroxo) complex (pK(a) > 13).     

The sorption of divalent metal ions on AlPO4

The sorption of Cu(2+), Pb(2+), Ni(2+), and Cd(2+) ions on the aluminum(III) phosphate was observed to increase with increases in the concentration, temperature, and pH of the system. The apparent dissociation (pK(a)), binding (pK(b)) and exchange (pK(ex)) constants of aluminum(III) phosphate were evaluated and found to be dependent upon the temperature and nature of the metal cations. The values of the dissociation constants (pK(a)) followed the order Pb(2+)相似文献   

Intrinsic surface reaction equilibrium constants of structurally charged amphoteric hydrotalcite-like compounds

The relative equations among intrinsic surface reaction equilibrium constants (K in 1-pK model, K(a1)(int) and K(a2)(int) in 2-pK model, and *K(Na)(int) and *K(Cl)(int) in inert electrolyte chemical binding model), points of zero charge (PZC), and structural charge density (sigma(st)) for amphoteric solids with structural charge were established to investigate the effects of sigma(st) on intrinsic equilibrium constants and PZC. The intrinsic equilibrium constants of HTlc with general formulas [(Zn,Mg)(1-x)Al(x)(OH)(2)](Cl,OH)(x) and [Mg(1-x)(Fe,Al)(x)(OH)(2)](Cl,OH)(x) were evaluated. The following main conclusions were obtained. For amphoteric solids with structural charge, a point of zero net charge (PZNC) independent of electrolyte concentration (c) exists. A common intersection point (CIP) should appear among the acid-base titration curves at different c, and the pH at the CIP is pH(PZNC). The pK, pK(a1)(int), and pK(a2)(int) may be expressed as a function of pH(PZNC) and sigma(st), and these intrinsic equilibrium constants can be directly calculated from pH(PZNC) and sigma(st). The inert electrolyte chemical binding does not exist for amphoteric surfaces with structural charge. PZNC is not equal to the point of zero net proton charge (PZNPC) when sigma(st) not equal 0. pH(PZNC) > pH(PZNPC) when sigma(st)>0; pH(PZNC) < pH(PZNPC) when sigma(st)<0; and pH(PZNC) = pH(PZNPC) only when sigma(st)=0. With increasing c, the difference between pH(PZNC) and pH(PZNPC) decreases; i.e., pH(PZNPC) moves forward to pH(PZNC) with increasing c. For the HTlc samples studied, with increasing x, the pH(PZNC) and the pK(a1)(int) and pK(a2)(int) decrease, and the pK increases. These results can be explained on the basis of the affinity of metal cations for H(+) or OH(-) and the electrostatic interaction between the charging surface and H(+) or OH(-).     

Kinetic and equilibria studies of the aquation of the trinuclear platinum phase II anticancer agent [(trans-PtCl(NH(3))(2))(2)(mu-trans-Pt(NH(3))(2)(NH(2)(CH(2))(6)NH(2))(2))](4+) (BBR3464)

The hydrolysis profile of the bifunctional trinuclear phase II clinical agent [(trans-PtCl(NH(3))(2))(2)(mu-trans-Pt(NH(3))(2)(NH(2)(CH(2))(6)NH(2))(2))](4+) (BBR3464, 1) has been examined using [(1)H,(15)N] heteronuclear single quantum coherence (HSQC) 2D NMR spectroscopy. Reported are estimates of the rate and equilibrium constants for the first and second aquation steps, together with the acid dissociation constant (pK(a1) approximately equal to pK(a2) approximately equal to pK(a3)). The equilibrium constants for the aquation determined by NMR at 298 and 310 K (I = 0.1 M, pH 5.3) are similar, pK(1) = pK(2) = 3.35 +/- 0.04 and 3.42 +/- 0.04, respectively. At lower ionic strength (I = 0.015 M, pH 5.3) the values at 288, 293, and 298 K are pK(1) = pK(2) = 3.63 +/- 0.05. This indicates that the equilibrium is not strongly ionic strength or temperature dependent. The aquation and anation rate constants for the two-step aquation model at 298 K in 0.1 M NaClO(4) (pH 5.3) are k(1) = (7.1 +/- 0.2) x 10(-5) s(-1), k(-1) = 0.158 +/- 0.013 M(-1) s(-1), k(2) = (7.1 +/- 1.5) x 10(-5) s(-1), and k(-2) = 0.16 +/- 0.05 M(-1) s(-1). The rate constants in both directions increase 2-fold with an increase in temperature of 5 K, and rate constants increase with a decrease in solution ionic strength. A pK(a) value of 5.62 plus minus 0.04 was determined for the diaqua species [(trans-Pt(NH(3))(2)(OH(2)))(2)(mu-trans-Pt(NH(3))(2)(NH(2)(CH(2))(6)-NH(2))(2))](6+) (3). The speciation profile of 1 under physiological conditions is explored and suggests that the dichloro form predominates. The aquation of 1 in 15 mM phosphate was also examined. No slowing of the initial aquation was observed, but reversible reaction between aquated species and phosphate does occur.     

亚甲基二膦酸为配位体的无氰碱性镀铜

提出一种以亚甲基二膦酸(MDPA, H₄L)为主配位剂的无氰镀铜体系. 采用pH 电位滴定法分别测定MDPA的四级解离常数和MDPA-Cu(II)的稳定常数, 并比较MDPA-Cu(II)和羟基乙叉二膦酸(HEDPA)-Cu(II)的循环伏安曲线和阴极极化曲线. 结果表明: MDPA各级解离常数为, pK₁=1.86, pK₂=2.65, pK₃=6.81, pK₄=9.04;MDPA与Cu²⁺形成分级配合物的稳定常数为, pK_ML=10.65, pK_ML2 = 5.59, pK_ML3 = 2.50; 随着pH升高, 形成的配合物依次为, Cu(H₃L)₂、[Cu(H₃L)(H₂L)]-和[Cu(H₂L)₂]^2-; 当pH在7-10 时, MDPA较HEDPA更易与Cu²⁺配位. 当pH=9 时, MDPA碱性镀铜体系阴极主要发生的是[Cu(H₃L)(H₂L)]^-和[Cu(H₂L)₂]^2-还原生成铜的过程; 在10 °C,MDPA体系的铜配位化合物还原生成铜的电位比HEDPA体系负移, 扩散速度更快.     

Polarography of cadmium malate complexes

The electrode reduction reaction of cadmium malate complexes at various pH values and ligand concentrations has been studied. At pH < pK(1) the complex Cd(H(2)A), log K = 0.57, exists. At pH > pK(2) Cd(A(2-))(n) species exist, log beta(1) = 1.9, log beta(2) = 2.8 log beta(3) = 3.4. At intermediate pH the complex Cd(HA) exists.     

Rates of water exchange on the [Fe4(OH)2(hpdta)2(H2O)4]0 molecule and its implications for geochemistry

The ammonium salt of [Fe(4)O(OH)(hpdta)(2)(H(2)O)(4)](-) is soluble and makes a monospecific solution of [Fe(4)(OH)(2)(hpdta)(2)(H(2)O)(4)](0)(aq) in acidic solutions (hpdta = 2-hydroxypropane-1,3-diamino-N,N,N',N'-tetraacetate). This tetramer is a diprotic acid with pK(a)(1) estimated at 5.7 ± 0.2 and pK(a)(2) = 8.8(5) ± 0.2. In the pH region below pK(a)(1), the molecule is stable in solution and (17)O NMR line widths can be interpreted using the Swift-Connick equations to acquire rates of ligand substitution at the four isolated bound water sites. Averaging five measurements at pH < 5, where contribution from the less-reactive conjugate base are minimal, we estimate: k(ex)(298) = 8.1 (±2.6) × 10(5) s(-1), ΔH(++) = 46 (±4.6) kJ mol(-1), ΔS(++) = 22 (±18) J mol(-1) K(-1), and ΔV(++) = +1.85 (±0.2) cm(3) mol(-1) for waters bound to the fully protonated, neutral molecule. Regressing the experimental rate coefficients versus 1/[H(+)] to account for the small pH variation in rate yields a similar value of k(ex)(298) = 8.3 (±0.8) × 10(5) s(-1). These rates are ～10(4) times faster than those of the [Fe(OH(2))(6)](3+) ion (k(ex)(298) = 1.6 × 10(2) s(-1)) but are about an order of magnitude slower than other studied aminocarboxylate complexes, although these complexes have seven-coordinated Fe(III), not six as in the [Fe(4)(OH)(2)(hpdta)(2)(H(2)O)(4)](0)(aq) molecule. As pH approaches pK(a1), the rates decrease and a compensatory relation is evident between the experimental ΔH(++) and ΔS(++) values. Such variation cannot be caused by enthalpy from the deprotonation reaction and is not well understood. A correlation between bond lengths and the logarithm of k(ex)(298) is geochemically important because it could be used to estimate rate coefficients for geochemical materials for which only DFT calculations are possible. This molecule is the only neutral, oxo-bridged Fe(III) multimer for which rate data are available.     

A detailed mechanistic study of the substitution behavior of an unusual seven-coordinate iron(III) complex in aqueous solution

A detailed mechanistic study of the substitution behavior of a 3d metal heptacoordinate complex, with a rare pentagonal-bipyramidal structure, was undertaken to resolve the solution chemistry of this system. The kinetics of the complex-formation reaction of [Fe(dapsox)(H(2)O)(2)]ClO(4) (H(2)dapsox = 2,6-diacetylpyridine-bis(semioxamazide)) with thiocyanate was studied as a function of thiocyanate concentration, pH, temperature, and pressure. The reaction proceeds in two steps, which are both base-catalyzed due to the formation of an aqua-hydroxo complex (pK(a1) = 5.78 +/- 0.04 and pK(a2) = 9.45 +/- 0.06 at 25 degrees C). Thiocyanate ions displace the first coordinated water molecule in a fast step, followed by a slower reaction in which the second thiocyanate ion coordinates trans to the N-bonded thiocyanate. At 25 degrees C and pH <4.5, only the first reaction step can be observed, and the kinetic parameters (pH 2.5: k(f(I)) = 2.6 +/- 0.1 M(-1) s(-1), DeltaH(#)(f(I)) = 62 +/- 3 kJ mol(-1), DeltaS(#)(f(I)) = -30 +/- 10 J K(-1) mol(-1), and DeltaV(#)(f(I)) = -2.5 +/- 0.2 cm(3) mol(-1)) suggest the operation of an I(a) mechanism. In the pH range 2.5 to 5.2 this reaction step involves the participation of both the diaqua and aqua-hydroxo complexes, for which the complex-formation rate constants were found to be 2.19 +/- 0.06 and 1172 +/- 22 M(-1) s(-1) at 25 degrees C, respectively. The more labile aqua-hydroxo complex is suggested to follow an I(d) or D substitution mechanism on the basis of the reported kinetic data. At pH > or =4.5, the second substitution step also can be monitored (pH 5.5 and 25 degrees C: k(f(II)) = 21.1 +/- 0.5 M(-1) s(-1), DeltaH(#)(f(II)) = 60 +/- 2 kJ mol(-1), DeltaS(#)(f(II)) = -19 +/- 6 J K(-1) mol(-1), and DeltaV(#)(f(II)) = +8.8 +/- 0.3 cm(3) mol(-1)), for which an I(d) or D mechanism is suggested. The results are discussed in terms of known structural parameters and in comparison to relevant structural and kinetic data from the literature.     

Mechanistic implications of proton transfer coupled to electron transfer.

The kinetics of electron transfer for the reactions cis-[Ru(IV)(bpy)2(py)(O)]2+ + H+ + [Os(II)(bpy)3]2+ <==> cis-[Ru(III)(bpy)2(py)(OH)]2+ + [Os(III)(bpy)3]3+ and cis-[Ru(III)(bpy)2(py)(OH)]2+ + H+ + [Os(II)(bpy)3]2+ <==> cis-[Ru(II)(bpy)2(py)(H2O)]2+ + [Os(III)(bpy)3]3+ have been studied in both directions by varying the pH from 1 to 8. The kinetics are complex but can be fit to a double "square scheme" involving stepwise electron and proton transfer by including the disproportionation equilibrium, 2cis-[Ru(III)(bpy)2(py)(OH)]2+ <==> (3 x 10(3) M(-1) x s(-1) forward, 2.1 x 10(5) M(-1) x s(-1) reverse) cis-[Ru(IV)(bpy)2(py)(O)]2+ + cis-[Ru(II)(bpy)2(py)(H2O)]2+. Electron transfer is outer-sphere and uncoupled from proton transfer. The kinetic study has revealed (1) pH-dependent reactions where the pH dependence arises from the distribution between acid and base forms and not from variations in the driving force; (2) competing pathways involving initial electron transfer or initial proton transfer whose relative importance depends on pH; (3) a significant inhibition to outer-sphere electron transfer for the Ru(IV)=O2+/Ru(III)-OH2+ couple because of the large difference in pK(a) values between Ru(IV)=OH3+ (pK(a) < 0) and Ru(III)-OH2+ (pK(a) > 14); and (4) regions where proton loss from cis-[Ru(II)(bpy)2(py)(H2O)]2+ or cis-[Ru(III)(bpy)2(py)(OH)]2+ is rate limiting. The difference in pK(a) values favors more complex pathways such as proton-coupled electron transfer.     

Acid-Base Properties of the Ground and Excited States of Ruthenium(II) Bis(2,2'-bipyridine) 3-Carboxyl-2,2'-bipyridine

Acid-base properties for ruthenium(II) bis(2,2'-bipyridine) 3-carboxyl-2,2'-bipyridine reveal a ground state pK(a) of 0.82 +/- 0.07 and an excited state pK(a) of 2.31 +/- 0.05, a 1.5 pH unit increase from the ground state. The excited state pK(a) is temperature independent while the ground state pK(a)(0) increases with temperature and has DeltaH(0) and DeltaS(0) values of -990 +/- 149 cm(-)(1) and -4.57 +/- 0.48 cm(-)(1) K(-)(1), respectively. The acidic form of the complex emits at lower energy than the basic form at both 296 and 77 K. The emission energy maxima are solvent dependent and decrease in energy when the solvent changes from 4:1 (v/v) 2-MeTHF-CH(2)Cl(2) to water and when the pH decreases. Changes in excited state lifetimes with emission energy follow the energy gap law with an intercept of 49 +/- 1 and a slope of (2.11 +/- 0.09) x 10(-)(3). Emission quantum yields for protonated and deprotonated species in 4:1 (v/v) 2-MeTHF-CH(2)Cl(2) are 0.023 +/- 0.001 and 0.110 +/- 0.002, respectively. The temperature dependence of the emission lifetimes gives energy barriers of 270 cm(-)(1) for the complex in aqueous solution at pH -0.5, and 990 cm(-)(1) in aqueous solution at pH 4.5, and 1920 cm(-)(1) in 4:1 (v/v) 2-MeTHF-CH(2)Cl(2.)     

Kinetics and mechanism of the pyridinolysis of S-2,4-dinitrophenyl 4-substituted thiobenzoates

[reaction: see text] The reactions of S-2,4-dinitrophenyl 4-methyl (1), S-2,4-dinitrophenyl 4-H (2), S-2,4-dinitrophenyl 4-chloro (3), and S-2,4-dinitrophenyl 4-nitro (4) thiobenzoates with a structurally homogeneous series of pyridines are subjected to a kinetic investigation in 44 wt % ethanol-water, at 25.0 degrees C and an ionic strength of 0.2 M (KCl). The reactions are studied spectrophotometrically (420 nm) by monitoring the appearance of 2,4-dinitrobenzenethiolate anion. Pseudo-first-order rate coefficients (k(obsd)) are obtained for all the reactions, employing excess of amine. The plots of k(obsd) vs [free pyridine] at constant pH are linear with the slopes (k(N)) independent of pH. The Br?nsted-type plots (log k(N) vs pK(a) of the conjugate acid of the pyridines) are curved for all the reactions. The Br?nsted curves are in accordance with stepwise mechanisms, through a zwitterionic tetrahedral intermediate (T(+/-)), and a change in the rate-limiting step. An equation based on this hypothesis accounts well for the experimental points. The Br?nsted lines were calculated with the following parameters: Reactions of thiolbenzoate 1: beta(1) 0.33 (slope at high pK(a)), beta(2) 0.95 (slope at low pK(a)), and pK(a)(0) = 8.5 (pK(a) at the curvature center); thiolbenzoate 2: beta(1) 0.30, beta(2) 0.88, and pK(a)(0) = 8.9; thiolbenzoate 3: beta(1) 0.33, beta(2) 0.89, and pK(a)(0) = 9.5; thiolbenzoate 4: beta(1) 0.21, beta(2) 0.97, and pK(a)(0) = 9.9. The increase of the pK(a)(0) value with the increase of the electron-withdrawing effect of the acyl substituent is explained by the argument that the rate of pyridine expulsion from T(+/-) (k(-)(1)) is favored over that of 2,4-dinitrobenzenethiolate leaving (k(2)), i.e., k(-)(1)/k(2) increases, as the acyl group becomes more electron withdrawing. The pK(a)(0) values for the title reactions are smaller than those for the reactions of the corresponding 4-nitrophenyl 4-substituted thiolbenzoates with the same pyridine series. This is explained by the larger k(2) value for 2,4-dinitrobenzenethiolate leaving from T(+/-) compared with 4-nitrobenzenethiolate, which results in lower k(-)(1)/k(2) ratios for the dinitro derivatives. The pK(a)(0) value obtained for the pyridinolysis of thiolbenzoate 2 (pK(a)(0) = 8.9) is smaller than that found for the same aminolysis of 2,4-dinitrophenyl benzoate (pK(a)(0) = 9.5). This is attributed to the greater nucleofugality from T(+/-) of 2,4-dinitrobenzenethiolate (pK(a) of conjugate acid 3.4) relative to 2,4-dinitrophenoxide (pK(a) of conjugate acid 4.1). The title reactions are also compared with the aminolysis of similar esters to assess the effect of the amine nature and leaving and acyl groups on the kinetics and mechanism.     

Thermodynamic and kinetic behaviour of [Pt(2-methylthiomethylpyridine)(OH2)2]2+

The diaqua complex [Pt(2-methylthiomethylpyridine)(OH(2))(2)](2+), Pt(mtp), was synthesized and investigated thermodynamically as well as kinetically. Spectrophotometric acid-base titrations were performed to determine the pK(a) values of the two coordinated water ligands. A low pK(a1) value of 3.15 was observed for the water molecule trans to the pyridine donor, whereas a pK(a2) value of 6.84 was found for the water molecule trans to the labilising sulphur donor. The substitution of coordinated water by a series of sterically hindered S-containing nucleophiles, viz. thiourea (tu), N,N'-dimethylthiourea (dmtu) and N,N,N',N'-tetramethylthiourea (tmtu), was studied under pseudo first-order conditions as a function of nucleophile concentration, pH (2, 4.75, 7.4), temperature and pressure, using stopped-flow techniques and UV-vis spectroscopy. In general the first substitution reaction takes place trans to the sulphur donor. At pH 2 the nucleophiles react in the order tu (634 ± 10) > dmtu (507 ± 5) ? tmtu (165 ± 3 M(-1) s(-1) at 25 °C), which is caused by steric hindrance. The second observed reaction involves two steps, viz. the displacement of the second water ligand and dechelation of the pyridine ring with the third-order rate constants 73.3 ± 0.8 (tu), 22.1 ± 0.1 (dmtu) and 6.8 ± 0.2 M(-2) s(-1) (tmtu) at 25 °C. At pH 4.75 the reactions are in general slower due to the presence of aqua-hydroxo species. The same order in reactivity was found, viz. tu (106 ± 1) > dmtu (72 ± 1) ? tmtu (14.1 ± 0.5 M(-1) s(-1) at 25 °C). No evidence for ring-dechelation could be observed under these conditions. At pH 7.4 the inert dihydroxo species is predominantly present in solution and consequently no substitution reaction was observed. Quantum chemical calculations were performed to support the interpretation and discussion of the experimental results.     

Palladacycle-promoted solvolytic cleavage of O,O-dimethyl O-aryl phosphorothioates. Converting a phosphorane-like transition state to an observable intermediate

The mechanism of cleavage of a series of seven O,O-dimethyl O-aryl phosphorothioates (6a-g) promoted by a C,N-palladacycle, (2-[N,N-dimethylamino(methyl)phenyl]-C(1),N)(pyridine) palladium(II) triflate (5:OTf) in methanol at 25 °C was investigated with the aim of identifying catalytically important intermediates. Complete (s)(s)pH/rate profiles (in methanol) were conducted for the cleavage of 6a-g in the presence of 0.08 mM 5. The log k(obs) for the catalyzed methanolysis of 6a increases linearly with (s)(s)pH with a plateau above the (s)(s)pK(a)(1) of 11.16 for formation of 5:(-)OCH3. The profiles for 6b-g are bell-shaped, depending on the apparent ionizations of two acidic groups, with the rate constant maximum of the bell and the (s)(s)pK(a)(1) values shifting to higher (s)(s)pH values as the (s)(s)pK(a)(HOAr) of the leaving group phenol increases. A Br?nsted plot of the log k(obs)(max) (the maximum rate constants for cleavage of 6a-g) vs (s)(s)pK(a)(HOAr) exhibits a downward break at ~ (s)(s)pK(a)(HOAr) 13, with the two wings having β(lg) values of 0.01 and -0.96. A model describing the kinetically important species involves a complex series of equilibria: 5:(HOCH(3)):pyr <=> 5:((-)OCH3):pyr + H(+) <=>(6) 5:((-)OCH3):6 + pyr <=> phosphorane 7 → product, where the rate limiting steps change from formation of 5:((-)OCH3):6 to formation of thiophosphorane 7 and then to product formation as the aryloxy leaving groups of 6 get progressively worse. Kinetic experiments indicate that the reaction of 5 with 6e, having a 4-chlorophenoxy leaving group, rapidly produces a transient intermediate, postulated to be the palladacycle-bound 5-coordinate thiophosphorane (7e) that exists long enough to obtain its UV/vis spectrum by stopped-flow spectrophotometry. Detailed analysis of the data sheds light on the origins of a previously reported anomalously large β(lg) of -1.93 for the descending wing of a Br?nsted plot (J. Am. Chem. Soc. 2010, 132, 16599). Finally, energetics analysis indicates that the binding of palladacycle to the transition state comprising attack of methoxide on 6e, [MeO(-) + 6e](++), stabilizes the latter by 34.9 kcal/mol, converting that transition state into an observable intermediate.     

Decomposition kinetics of Ni(III)-peptide complexes with histidine and histamine as the third residue

The decomposition kinetics of the Ni(III) complexes of Gly(2)HisGly and Gly(2)Ha are studied from p[H(+)] 3.5 to 10, where His is l-histidine and Ha is histamine. In these redox reactions, at least two Ni(III) complexes are reduced to Ni(II) while oxidizing a single peptide ligand. The rate of Ni(III) loss is first order at low pH, mixed order from pH 7.0 to 8.5, and second order at higher pH. The transition from first- to second-order kinetics is attributed to the formation of an oxo-bridged Ni(III)-peptide dimer. The rates of decay of the Ni(III) complexes are general-base assisted with Br?nsted beta values of 0.62 and 0.59 for Ni(III)Gly(2)HisGly and Ni(III)Gly(2)Ha, respectively. The coordination of Gly(2)HisGly and Gly(2)Ha to Ni(II) are examined by UV-vis and CD spectroscopy. The square planar Ni(II)(H(-2)Gly(2)HisGly)(-) and Ni(II)(H(-2)Gly(2)Ha) complexes lose an additional proton from an imidazole nitrogen at high pH with pK(a) values of 11.74 and 11.54, respectively. The corresponding Ni(III) complexes have axially coordinated water molecules with pK(a) values of 9.37 and 9.44. At higher pH an additional proton is lost from the imidazole nitrogen with a pK(a) value of 10.50 to give Ni(III)(H(-3)Gly(2)Ha)(H(2)O)(OH)(2-).     

Reactivity of the Coordinated Hydroperoxo Ligand

The reactivity of the hydroperoxo complex [Co(CN)(5)OOH](3)(-) has been studied in aqueous solution. The complex undergoes acid-catalyzed aquation (k = 1.89(5) x 10(-)(2) s(-)(1), pK(a) = 5.21(4), T = 20 degrees C, I = 0.1 M). Assuming an I(d) mechanism, this allows the relative affinity for Co(III) to be deduced as H(2)O(2) < H(2)O < HO(2)(-) and implies H(2)O(2) to be a very weak ligand. At neutral pH the hydroperoxo complex effects efficient oxygen atom transfer to L-methionine to give an intermediate identified as [Co(CN)(5)(L-methionine S-oxide)](2)(-), which then dissociates to [Co(CN)(5)OH(2)](2)(-) and L-methionine S-oxide. The reaction is acid catalyzed and is proposed to take place via nucleophilic attack of sulfur on the proximal oxygen of the hydroperoxo ligand with concerted loss of water. The significance of these results for the interaction of hydrogen peroxide with labile metal ions is discussed.     

Kinetic investigation of the reactions of S-4-nitrophenyl 4-substituted thiobenzoates with secondary alicyclic amines in aqueous ethanol

The reactions of S-4-nitrophenyl 4-X-substituted thiobenzoates (X = H, Cl, and NO(2): 1, 2, and 3, respectively) with a series of secondary alicyclic amines (SAA) were subjected to a kinetic investigation in 44 wt % ethanol-water, at 25.0 degrees C and an ionic strength of 0.2 M (KCl). The reactions were followed spectrophotometrically by monitoring the release of 4-nitrobenzenethiolate anion at 420-425 nm. Under excess amine, pseudo-first-order rate constants (k(obsd)) are obtained for all reactions. The plots of k(obsd) vs [SAA] at constant pH are linear with the slope (k(N)) independent of pH. The statistically corrected Br?nsted-type plots (log k(N)/q vs pK(a) + log p/q) for the reactions of 1 and 2 are nonlinear with slopes at high pK(a), beta(1) = 0.27 and 0.10, respectively, and slopes at low pK(a), beta(2) = 0.86 and 0.84, respectively. The Br?nsted curvature is centered at pK(a) (pK(a)(0)) 10.0 and 10.4, respectively. The reactions of SAA with 3 exhibit a linear Br?nsted-type plot of slope 0.81. These results are consistent with a stepwise mechanism, through a zwitterionic tetrahedral intermediate (T(+/-)). For the reactions of 1 and 2, there is a change in rate-determining step with amine basicity, from T(+/-) breakdown to products at low pK(a), to T(+/-) formation at high pK(a). For the reactions of 3, breakdown to products of T(+/-) is rate limiting for all the SAA series (pK(a)(0) > 11). The increasing pK(a)(0) value as the substituent in the acyl group becomes more electron withdrawing is attributed to an increasing nucleofugality of SAA from T(+/-). The greater pK(a)(0) value for the reactions of SAA with 1, relative to that found in the pyridinolysis of 2,4-dinitrophenyl benzoate (pK(a)(0) = 9.5), is explained by the greater nucleofugality from T(+/-) of the former amines, compared to isobasic pyridines, and the greater leaving ability from T(+/-) of 2,4-dinitrophenoxide relative to 4-nitrobenzenethiolate.     

Study of pH-dependent zinc(II)-carboxamide interactions by zinc(II)-carboxamide-appended cyclen complexes (cyclen = 1,4,7,10-tetraazacyclododecane)

To elucidate intrinsic recognition of carboxamides by zinc(II) in carbonic anhydrase (CA) (as inhibitors) and carboxypeptidase A (CPA) (as substrates), a new series of Zn(2+)-carboxamide-appended cyclen complexes have been synthesized and characterized (cyclen = 1,4,7,10-tetraazacyclododecane). Two types of Zn(2+)-carboxamide interactions have been found. In the first case represented by a zinc(II) complex of carbamoylmethyl-1,4,7,10-tetraazacyclododecane (L(1)), the amide oxygen binds to zinc(II) at slightly acidic pH (to form ZnL(1)), and the deprotonated amide N(-) binds to zinc(II) at alkaline pH (to form ZnH(-1)L(1)) with pK(a) = 8.59 at 25 degrees C and I = 0.1 (NaNO(3)), as determined by potentiometric pH titrations, infrared spectral changes, and (13)C and (1)H NMR titrations. The X-ray crystal structure of ZnH(-1)L(3) (where L(3) = N-(4-nitrophenyl)carbamoylmethyl cyclen, pK(a) = 7.01 for ZnL(3) <==> ZnH(-1)L(3)) proved that the zinc(II) binds to the amidate N(-) (Zn-N(-) distance of 1.974(3) A) along with the four nitrogen atoms of cyclen (average Zn-N distance 2.136 A). Crystal data: monoclinic, space group P2(1)/n (No. 14) with a = 10.838(1) A, b = 17.210(2) A, c = 12.113(2) A, b = 107.38(1) degrees, V = 2156.2(5) A(3), Z = 4, R = 0.042, and R(w) = 0.038. These model studies provide the first chemical support that carboxamides are CA(-) inhibitors by occupying the active Zn(2+) site both in acidic and alkaline pH to prevent the occurrence of the catalytically active Zn(2+)-OH(-) species. In the second case represented by a zinc(II) complex of 1-(N-acetyl)aminoethylcyclen, ZnL(6), the pendant amide oxygen had little interaction with zinc(II) at acidic pH. At alkaline pH, the monodeprotonation yielded a zinc(II)-bound hydroxide species ZnL(6)(OH(-)) (pK(a) = 7.64) with the amide pendant remaining intact. The ZnL(6)(OH(-)) species showed the same nucleophilic activity as Zn(2+)-cyclen-OH(-). The second case may mimic the Zn(2+)-OH(-) mechanism of CPA, where the nucleophilic Zn(2+)-OH(-) species does not act as a base to deprotonate a proximate amide.