Photophysics and charge dynamics of Q-PbS based mixed ZnS/PbS and PbS/ZnS semiconductor nanoparticles

The surface of ZnS and PbS has been modified by interfacing PbS on ZnS and ZnS on PbS nanoparticles. This produced core-shell nanocomposites ZnS/PbS and PbS/ZnS with tunable electronic properties. In both structures PbS particles are present in cubic form with an average diameter of about 6 nm. The addition of Pb2+ (3 x 10(-4) mol dm(-3)) to Q-ZnS (1.5 x 10(-4) mol dm(-3)) in the basic pH range produces size-quantized fluorescent PbS particles coated by metal hydroxides. In these particles the relaxation kinetics of charge carriers has been followed using a picosecond single-photon counting technique. At 1.5 x 10(-4) mol dm(-3) Pb2+ an interfacial relaxation of charge from ZnS to PbS phase could be observed in subnanosecond time domain. An increase in [Pb2+] from 2 x 10(-4) to 1 x 10(-3) mol dm(-3) enhanced the average emission lifetime from 9.4 to 19.4 ns. Composite PbS/ZnS particles are produced at high [ZnS] only. These particles had emission lifetime in mus time range. The extent of charge separation and the dynamics of charge carriers could be manipulated by the surface modification of these nanostructures.     

Removal of Pb(II) ions from aqueous systems using thiol-functionalized cobalt-ferrite magnetic nanoparticles

We have investigated the removal of Pb²⁺ ions from water using thiol-functionalized, cobalt-ferrite, magnetic nanoparticles. These magnetic nanoparticles were prepared using the co-precipitation method and their surfaces were modified with tetraethoxy silane and 3-mercaptopropyl trimethoxysilane in order to provide a sufficient surface concentration of the thiol (–SH) functional groups. The adsorption of the Pb²⁺ ions from the aqueous solutions onto the thiol-functionalized, cobalt-ferrite, magnetic nanoparticles was studied. The investigated parameters include the pH value of the model water, the concentration of the adsorbent, the contact time and the temperature of adsorption. The removal of the Pb²⁺ was found to be greater at the higher pH values and increasing the temperature was also found to increase the removal of Pb²⁺ ions.     

Aqueous ferrofluid of magnetite nanoparticles: Fluorescence labeling and magnetophoretic control

A method is presented for the preparation of a biocompatible ferrofluid containing dye-functionalized magnetite nanoparticles that can serve as fluorescent markers. This method entails the surface functionalization of magnetite nanoparticles using citric acid to produce a stable aqueous dispersion and the subsequent binding of fluorescent dyes to the surface of the particles. Several ferrofluid samples were prepared and characterized using Fourier transform infrared spectroscopy (FTIR), X-ray photoelectron spectroscopy (XPS), thermogravimetric analysis (TGA), BET surface area analysis, transmission electron microscopy (TEM), and SQUID magnetometry. In addition, confocal fluorescence microscopy was used to study the response of the fluorescent nanoparticles to an applied magnetic field and their uptake by cells in vitro. Results are presented on the distribution of particle sizes, the fluorescent and magnetic properties of the nanoparticles, and the nature of their surface bonds. Biocompatible ferrofluids with fluorescent nanoparticles enable optical tracking of basic processes at the cellular level combined with magnetophoretic manipulation and should be of substantial value to researchers engaged in both fundamental and applied biomedical research.     

Controlled formation of gold nanoparticle dimers using multivalent thiol ligands

Approaches for the controlled formation of gold nanoparticle dimers are investigated. These are based on a locally confined surface modification of gold nanoparticles followed by bridging two particles with an organic linker. A key factor in these approaches is the use of multivalent ligands. Citrate-stabilized gold nanoparticles are immobilized on a glass surface and mono- and multivalent thiol ligands are investigated regarding their ability to inactivate the nanoparticles sites facing away from the glass. A successful locally confined functionalization is only possible if multivalent ligands are used in this step. The application of monovalent ligands results in less stable particles without a permanent regioselective functionalization. This result can be explained by the dynamic equilibrium between bound and free ligands. Subsequently, the sites of the nanoparticles previously bound to the glass surface are functionalized with thiol ligands additionally bearing a reactive group. Approaches using dithiol linkers, diamine linkers, and coupling complementary functionalized particles are investigated. The highest yield of stable dimers is obtained from conditions where nanoparticles which are regioselectively functionalized with an N-hydroxysuccinimide ester are reacted with complementary amino-functionalized particles. The application of nanoparticles with activated carboxyl groups is essential since standard carboxyl activation agents induce an aggregation of the nanoparticles due to a reaction with remaining citrate molecules on the nanoparticle surface which reduces significantly electrostatic stabilization. This versatile approach using complementary regioselective with multivalent ligands functionalized nanoparticles may be also used for the coupling of particles with different size, shape, or composition, as well as a control of the interparticle distance.     

Gold nanoparticle probes for the detection of mercury, lead and copper ions

Monitoring the levels of potentially toxic metal (PTM) ions (e.g., Hg(2+), Pb(2+), Cu(2+)) in aquatic ecosystems is important because these ions can have severe effects on human health and the environment. Gold (Au) nanomaterials are attractive sensing materials because of their unique size- and shape-dependent optical properties. This review focuses on optical assays for Hg(2+), Pb(2+), and Cu(2+) ions using functionalized Au nanomaterials. The syntheses of functionalized Au nanomaterials are discussed. We briefly review sensing approaches based on changes in absorbance resulting from metal ion-induced aggregation of Au nanoparticles (NPs) or direct deposition of metal ions onto Au NPs. The super-quenching properties of Au NPs allow them to be employed in 'turn on' and 'turn off' fluorescence approaches for the sensitive and selective detection of Hg(2+), Pb(2+), and Cu(2+) ions. We highlight approaches based on fluorescence quenching through analyte-induced aggregation or the formation of metallophilic complexes of Au nanodots (NDs). We discuss the roles of several factors affecting the selectivity and sensitivity of the nanosensors toward the analytes: the size of the Au nanomaterial, the length and sequence of the DNA or the nature of the thiol, the surface density of the recognition ligand, and the ionic strength and pH of the buffer solution. In addition, we emphasize the potential of using new nanomaterials (e.g., fluorescent silver nanoclusters) for the detection of PTM ions.     

Effect of operating conditions on the removal of Pb2+ by microporous titanosilicate ETS-10 in a fixed-bed column

The breakthrough behavior of Pb2+ in an ETS-10 fixed bed was experimentally examined at various operating conditions. Results showed that the adsorption amount of Pb2+ ions per unit mass of ETS-10 particles in a column is about 1.68 mmol/g under the experimental conditions. This amount was not markedly affected by the operating conditions because of the rapid adsorption rate of Pb2+ ions on ETS-10. In the presence of competitive metal ions, the amount of Pb2+ adsorbed on ETS-10 was slightly reduced. An overshoot of the effluent concentrations of competitive metal ions Cu2+ and Cd2+ was observed in the adsorption systems of binary and ternary solutions. This is ascribed to the replacement of pre-adsorbed Cu2+ and Cd2+ ions by Pb2+ ions. The ETS-10 column broken up by Pb2+ ions can be regenerated by using an EDTA-Na2 solution and the regenerated column can be reused.     

Light‐Triggered,Spatially Localized Chemistry by Photoinduced Electron Transfer

It is of immense interest to exert spatial and temporal control of chemical reactions. It is now demonstrated that irradiation can trigger reactions specifically at the surface of a simple colloidal construct, obtained by adsorbing polyethyleneimine on fluorescent colloidal particles. Exciting the fluorescent dye in the colloid affords photoinduced electron transfer to spatially proximal amine groups on the adsorbed polymer to form free radical ions. It is demonstrated that these can be harnessed to polymerize acrylic acid monomer at the particle surface, or to break up colloidal assemblies by cleaving a cross‐linked polymer mesh. Formation of free radical ions is not a function of the size of the colloid, neither is it restricted to a specific fluorophore. Fluorophores with redox potentials that allow photoinduced electron transfer with amine groups show formation of free radical ions.     

Light‐Triggered,Spatially Localized Chemistry by Photoinduced Electron Transfer

It is of immense interest to exert spatial and temporal control of chemical reactions. It is now demonstrated that irradiation can trigger reactions specifically at the surface of a simple colloidal construct, obtained by adsorbing polyethyleneimine on fluorescent colloidal particles. Exciting the fluorescent dye in the colloid affords photoinduced electron transfer to spatially proximal amine groups on the adsorbed polymer to form free radical ions. It is demonstrated that these can be harnessed to polymerize acrylic acid monomer at the particle surface, or to break up colloidal assemblies by cleaving a cross‐linked polymer mesh. Formation of free radical ions is not a function of the size of the colloid, neither is it restricted to a specific fluorophore. Fluorophores with redox potentials that allow photoinduced electron transfer with amine groups show formation of free radical ions.     

A fluorescent and chemiluminescent difunctional mesoporous silica nanoparticle as a label for the ultrasensitive detection of cancer cells

A new kind of ultrabright fluorescent and chemiluminescent difunctional mesoporous silica nanoparticle (FCMSN) is reported. A luminescent dye, Rhodamine 6G or tris(2,2′-bipyridyl)dichlororuthenium(II) hexahydrate (Rubpy), is doped inside nanochannels of a silica matrix. The hydrophobic groups in the silica matrix avoid the leakage of dye from open channels. The amines groups on the surface of the FCMSN improve the modification performance of the nanoparticle. Because the nanochannels are isolated by a network skeleton of silica, fluorescence quenching based on the inner filter effect of the fluorescent dyes immobilized in nanochannels is weakened effectively. The Quantum Yield of obtained 90 nm silica particles was about 61%. Compared with the fluorescent core–shell nanoparticle, the chemiluminescence reagents can freely enter the nanoparticles to react with fluorescent dyes to create chemiluminescence. The results show that the FCMSN are both fluorescent labels and chemiluminescent labels. In biological applications, the NaIO₄ oxidation method was proven to be superior to the glutaraldehyde method. The amount of amino could affect the specificity of the FCMSN. The fluorescence microscopy imaging demonstrated that the FCMSN is viable for biological applications.     

Nucleation of gold nanoparticles on latex particle surfaces

Gold particles were nucleated on functionalized (i.e., sulfonate or imidazole groups) latex particle surfaces. Gold ions were associated with the functional groups present on the surface of the latex particles by metal‐ligand formation and were then reduced to nucleate gold particles on the particle surface. The use of imidazole groups favored the metal‐ligand formation more effectively compared with sulfonic acid groups, so gold nucleation was investigated on the surface of imidazole‐functionalized model latex particles. The desorption of gold atoms or their surface migration first occurred during the reduction process and then gold nanoparticles were nucleated. The utilization of strong reductants, such as NaBH₄ and dimethylamine borane (DMAB) under mildly acidic conditions (i.e., pH 4) led to the deprotonation of imidazole‐rich polymer chains present on the surface of the model latex particles followed by deswelling of hydrophilic polymer surface layers. As a result, well‐dispersed gold nanoparticles were embedded in the hydrophilic polymer surface. On the other hand, the use of weak reductants led to the formation of localized gold aggregates on the surface of the latex particles. The removal of residual styrene monomer is very important because gold ions can be coordinated with the vinyl groups present in styrene monomer and would then be reduced by nucleophilic water addition. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 912–925, 2008     

New BODIPY derivatives as OFF-ON fluorescent chemosensor and fluorescent chemodosimeter for Cu2+: cooperative selectivity enhancement toward Cu2+

New 4,4-difluoro-4-bora-3a,4a-diaza-s-indacene (BODIPY) derivatives (1 and 2) were synthesized as an "off-on" fluorescent chemosensor and fluorescent chemodosimeter for Cu2+ and Pb2+. Compound 1 displayed selective and large chelation enhanced fluorescence effects with Pb2+ and Cu2+ among the metal ions examined. On the other hand, compound 2, a fluorescent chemodosimeter, effectively recognized Cu2+ via a selective hydrolysis of the acetyl group.     

Fe3O4 and gamma-Fe2O3 nanoparticles for the adsorption of Co2+ from aqueous solution

The adsorption of Co2+ ions from nitrate solutions using iron oxide nanoparticles of magnetite (Fe3O4) and maghemite (gamma-Fe2O3) has been studied. The adsorption of Co2+ ions on the surface of the particles was investigated under different conditions of oxide content, contact time, solution pH, and initial Co2+ ion concentration. It has been found that the equilibrium can be attained in less than 5 min. The maximum loading capacity of Fe3O4 and gamma-Fe2O3 nanoparticles is 5.8 x 10(-5) and 3.7 x 10(-5) mol m(-2), respectively, which are much higher than the previously studied, iron oxides and conventional ion exchange resins. Co2+ ions were also recovered by dilute nitric acid from the loaded gamma-Fe2O3 and Fe3O4 with an efficiency of 86 and 30%, respectively. That has been explained by the different mechanisms by including both the surface and structural loadings of Co2+ ions. The surface adsorption of Co2+ on Fe3O4 and gamma-Fe2O3 nanoparticles has been found to have the same mechanism of ion exchange reaction between Co2+ in the solution and proton bonded on the particle surface. The conditional equilibrium constants of surface adsorption of Co2+ on Fe3O4 and gamma-Fe2O3 nanoparticles have been determined to be log K=-3.3+/-0.3 and -3.1+/-0.2, respectively. The structural loading of Co2+ ions into Fe3O4 lattice has been found to be the ion exchange reaction between Co2+ and Fe2+ while that into gamma-Fe2O3 lattice to fill its vacancy. The effect of temperature on the adsorption of Co2+ was also investigated, and the value of enthalpy change was determined to be 19 kJ mol(-1).     

Synthesis of aqueous Au core-Ag shell nanoparticles using tyrosine as a pH-dependent reducing agent and assembling phase-transferred silver nanoparticles at the air-water interface

We demonstrate that the amino acid tyrosine is an excellent reducing agent under alkaline conditions and may be used to reduce Ag+ ions to synthesize stable silver nanoparticles in water. The tyrosine-reduced silver nanoparticles may be separated out as a powder that is readily redispersible in water. The silver ion reduction at high pH occurs due to ionization of the phenolic group in tyrosine that is then capable of reducing Ag+ ions and is in turn converted to a semi-quinone structure. These silver nanoparticles can easily be transferred to chloroform containing the cationic surfactant octadecylamine by an electrostatic complexation process. The now hydrophobic silver nanoparticles may be spread on the surface of water and assembled into highly ordered, linear superstructures that could be transferred as multilayers onto suitable supports by the versatile Langmuir-Blodgett technique. Further, tyrosine molecules bound to the surface of Au nanoparticles through amine groups in the amino acid may be used to selectively reduce silver ions at high pH on the surface of the Au nanoparticles, thus leading to a simple strategy for realizing phase-pure Au core-Ag shell nanostructures.     

A Simple Approach to Fabricate CdS-SiO2 Hybrid Microspheres by Producing CdS Nanoparticles on the Surface of Thiolated SiO2 Microspheres

IntroductionSemiconductor nanoparticles show a quantum sizeeffect and have attracted much attention because oftheir unique photochemical and photophysical proper-ties[1—4].In recent years,quantumdots of CdS and in-organic nanoparticles hybrid composites …     

基于G-四联体的纳米探针比色检测铅离子

基于纳米探针和G-四联体建立了简便快速检测铅离子的方法. 纳米探针采用金纳米粒子自组装修饰富G寡核苷酸制得, 在铅离子存在下, 纳米探针上的富G寡核苷酸形成G-四联体, 导致纳米探针凝聚变色. 在优化条件下, 比色检测铅离子的线性范围为48~480 nmol/L, 检出限为20 nmol/L; 大多数金属离子无明显干扰, 而有明显干扰的汞离子可采用与之特异结合的寡核苷酸有效消除. 将该法成功用于环境水样中铅离子的检测, 重现性(RSD<3.0%)与回收率(98.4%~101.5%)良好.     

Turning fluorescent dyes into Cu(II) nanosensors

There is great interest in the self-organization of the proper subunits as a new strategy for the realization of fluorescent chemosensors. In this article, it is shown that commercially available fluorescent dyes, functionalized with triethoxysilane moieties, can be converted into fluorescent chemosensors by simple inclusion into silica nanostructures. Dye-doped silica nanoparticles and thin films detect Cu(II) ions in the micromolar range by the quenching of fluorescence emission. The different response toward Zn(II), Ni(II), and Co(II) metal ions was also investigated and is reported. The self-organization of the silica structures leads, at the same time, to the formation of metal ion binding sites as well as to the linking of a fluorescent reporter in their proximity. Structural features of the materials, particularly particle size and network porosity, strongly affect their ability to act as fluorescent sensors.     

Core-shell nanoparticles: characterization and study of their use for the encapsulation of hydrophobic fluorescent dyes

Core-shell nanocapsules intended to be used as drug scavengers were prepared using a surfactant mixture containing octadecyltrimethoxysilane (OTMS) as a reactive amphiphile, to form spherical templates. A siloxane shell was grown on the surface of the templates by reacting tetramethoxysilane (TMOS) with the silanol groups obtained after the hydrolysis and condensation of OTMS. Dynamic light scattering (DLS) showed that particles with diameters in the range of 100-200 nm were obtained, with core and shell sizes controlled by varying component compositions. Atomic force microscopy (AFM) was used to study the effect of the silica coating of the templates on their robustness after deposition on a substrate. Subsequently, we present studies on the encapsulation of two hydrophobic fluorescent dyes, which are sensors of polarity and rigidity. Steady-state fluorescence spectroscopy was used to examine the fluorescence response of the dyes before and after shell growth. Changes in the emission of the encapsulated dyes were related to changes in the polarity and rigidity of the microenvironment where the dyes were located and correlated to the AFM results. Finally, dye-free core-shell particles were used to sequester the dyes from aqueous suspensions. Fluorescence of the sequestered species was compared to the dye-loaded particles to determine the final fate of the fluorophores in the nanoparticles.     

Quantitative analysis and characterization of biofunctionalized fluorescent silica particles

A strategy for the production and subsequent characterization of biofunctionalized silica particles is presented. The particles were engineered to produce a bifunctional material capable of both (a) the attachment of fluorescent dyes for particle encoding and (b) the sequential modification of the surface of the particles to couple oligonucleotide probes. A combination of microscopic and analytical methods is implemented to demonstrate that modification of the particles with 3-aminopropyl trimethoxysilane results in an even distribution of amine groups across the particle surface. Evidence is provided to indicate that there are negligible interactions between the bound fluorescent dyes and the attached biomolecules. A unique approach was adopted to provide direct quantification of the oligonucleotide probe loading on the particle surface through X-ray photoelectron spectroscopy, a technique which may have a major impact for current researchers and users of bead-based technologies. A simple hybridization assay showing high sequence specificity is included to demonstrate the applicability of these particles to DNA screening.     

Modification of gold nanoparticle composite nanostructures using thermosensitive core-shell particles as a template

We report the formation of novel thermosensitive hybrid core-shell particles via in situ synthesis of gold nanoparticles using thermosensitive core-shell particles as a template. The template core-shell particles, with cores composed mainly of poly(glycidyl methacrylate) (GMA) and shells composed mainly of poly(N-isopropylacrylamide) (PNIPAM), were synthesized in aqueous medium, and functional groups such as thiol groups were incorporated into each particle. We found that these particles containing thiol groups were effective for the in situ synthesis of gold nanoparticles in long-term storage. The obtained hybrid particles exhibited a reversible color change from red to purple, which originated from the surface plasmon resonance of gold nanoparticles and which was temperature-dependent in the range of 25-40 degrees C. In addition to their thermosensitive property, the hybrid particles exhibited the unique characteristic of uniform distribution on a solid substrate. The particles obtained by this approach have potential thermosensitive applications such as in sensors and photonic or electronic devices.     

Gold nanoshells on polystyrene cores for control of surface plasmon resonance

A method is presented for synthesizing core-shell structures consisting of monodisperse polystyrene latex nanospheres as cores and gold nanoparticles as shells. Use of polystyrene spheres as the core in these structures is advantageous because they are readily available commercially in a wide range of sizes, and with dyes or other molecules doped into them. Gold nanoparticles, ranging in size from 1 to 20 nm, are prepared by reduction of a gold precursor with sodium citrate or tetrakis(hydroxymethyl)phosphonium chloride (THPC). Carboxylate-terminated polystyrene spheres are functionalized with 2-aminoethanethiol hydrochloride (AET), which forms a peptide bond with carboxylic acid groups on their surface, resulting in a thiol-terminated surface. Gold nanoparticles then bind to the thiol groups to provide up to about 50% coverage of the surface. These nanoparticles serve as seeds for growth of a continuous gold shell by reduction of additional gold precursor. The shell thickness and roughness can be controlled by the size of the nanoparticle seeds as well as by the process of their growth into a continuous shell. By variation of the relative sizes of the latex core and the thickness of the gold overlayer, the plasmon resonance of the nanoshell can be tuned to specific wavelengths across the visible and infrared range of the electromagnetic spectrum, for applications ranging from the construction of photonic crystals to biophotonics. The position and width of the plasmon resonance extinction peak are well-predicted by extended Mie scattering theory.