Liquid Densities and Excess Molar Volumes for Binary Systems (Ionic Liquids + Methanol or Water) at 298.15, 303.15 and 313.15 K,and at Atmospheric Pressure

Binary excess molar volumes, V _m ^E, have been evaluated from density measurements, using a vibrating tube densimeter over the entire composition range for binary liquid mixtures of ionic liquids 1-ethyl-3-methyl-imidazolium diethyleneglycol monomethylethersulphate [EMIM]⁺[CH₃(OCH₂CH₂)₂OSO₃]⁻ or 1-butyl-3-methyl-imidazolium diethyleneglycol monomethylethersulphate [BMIM]⁺[CH₃(OCH₂CH₂)₂OSO₃]⁻ or 1-methyl-3-octyl-imidazolium diethyleneglycol monomethylethersulphate [MOIM]⁺[CH₃(OCH₂CH₂)₂OSO₃]⁻+methanol and [EMIM]⁺[CH₃(OCH₂CH₂)₂OSO₃]⁻+water at 298.15, 303.15 and 313.15 K. The V _m ^E values were found to be negative for all systems studied. The V _m ^E results are explained in terms of intermolecular interactions and packing effects. The experimental data were fitted by the Redlich-Kister polynomial.     

Direct electrochemical reduction of hemin in imidazolium-based ionic liquids

The direct electrochemical reduction of hemin, protoporphyrin(IX) iron(III) chloride, ligated with strong or weak heterocyclic bases, was investigated in the ionic liquids (IL), 1-butyl-3-methylimidazolium hexafluorophosphate ([bmim][PF₆]) and 1-octyl-3-methylimidazolium hexafluorophosphate ([omim][PF₆]), using cyclic voltammetry and chronocoulometry. Hemin complexed with N-methylimidazole (NMI) or with pyridine had E_1/2 values slightly (4–59 mV) more positive in IL (without electrolyte) than in methanol (1.0 M electrolyte) using a gold electrode. NMI-ligated hemin had a lower E_1/2 than pyridine-ligated hemin in either IL, consistent with the stronger electron donor characteristic of NMI. [Bmim][PF₆] solutions consistently yielded E_1/2 values 30 mV more negative than [omim][PF₆] solutions. The diffusion coefficients D_o of hemin in the IL ranged between 1.50 and 2.80×10⁻⁷ cm² s⁻¹, while the heterogeneous electron-transfer rate constants k_s ranged between 3.7 and 14.3×10⁻³ cm s⁻¹. Cyclic voltammetry of hemin adsorbed to a gold surface through 4,4′-bispyridyl disulfide (AT4) linkages showed a large positive shift in the oxidation wave, indicating that adsorption stabilizes the reduced hemin state. The surface concentration Γ_o of the adsorbed hemin was determined to be 1.21×10⁻¹⁰ mol cm⁻², indicating the presence of one or more complete monolayers of hemin. These findings suggest that while hemin is electrochemically active in IL, its behavior is modified by the ligand field strength and surface adsorption phenomena.     

Separation of no-carrier-added 109Cd from natural silver target using RTIL 1-butyl-3-methylimidazolium hexafluorophosphate

The room temperature ionic liquid (RTIL), 1-butyl-3-methylimidazolium hexafluorophosphate [C₄mim][PF₆] has various applications in the separation of a range of metal ions replacing volatile and toxic traditional organic solvents in liquid–liquid extraction systems. In this study, the RTIL [C₄mim][PF₆] was used to separate no-carrier-added (NCA) ¹⁰⁹Cd from α-particle irradiated Ag target. A natural Ag foil was bombarded by 30 MeV α-particles to produce ¹⁰⁹Cd. After the decay of all co-produced short-lived products, NCA ¹⁰⁹Cd was separated from the bulk Ag using [C₄mim][PF₆] as extractant from HNO₃ medium. Ammoniumpyrrolidine dithiocarbamate (APDC) was used as a complexing agent. At the optimum condition, 3 M HNO₃, 0.01 M APDC in presence of [C₄mim][PF₆], ~99 % bulk Ag was extracted to the IL phase, leaving NCA ¹⁰⁹Cd in the aqueous phase. The amount of Ag became negligibly small after re-extraction in the same condition. The ionic liquid was recovered by washing it with 1 M HCl.     

Ionic Association of the Ionic Liquids [C4mim][BF4], [C4mim][PF6], and [Cnmim]Br in Molecular Solvents

Considering the ionic nature of ionic liquids (ILs), ionic association is expected to be essential in solutions of ILs and to have an important influence on their applications. Although numerous studies have been reported for the ionic association behavior of ILs in solution, quantitative results are quite scarce. Herein, the conductivities of the ILs [C_nmim]Br (n=4, 6, 8, 10, 12), [C₄mim][BF₄], and [C₄mim][PF₆] in various molecular solvents (water, methanol, 1‐propanol, 1‐pentanol, acetonitrile, and acetone) are determined at 298.15 K as a function of IL concentration. The conductance data are analyzed by the Lee–Wheaton conductivity equation in terms of the ionic association constant (K_A) and the limiting molar conductance (Λ_m⁰). Combined with the values for the Br^? anion reported in the literature, the limiting molar conductivities and the transference numbers of the cations and [BF₄]^? and [PF₆]^? anions are calculated in the molecular solvents. It is shown that the alkyl chain length of the cations and type of anion affect the ionic association constants and limiting molar conductivities of the ILs. For a given anion (Br^?), the Λ_m⁰ values decrease with increasing alkyl chain length of the cations in all the molecular solvents, whereas the K_A values of the ILs decrease in organic solvents but increase in water as the alkyl chain length of the cations increases. For the [C₄mim]⁺ cation, the limiting molar conductivities of the ILs decrease in the order Br^?>[BF₄]^?>[PF₆]^?, and their ionic association constants follow the order [BF₄]^?>[PF₆]^?>Br^? in water, acetone, and acetonitrile. Furthermore, and similar to the classical electrolytes, a linear relationship is observed between ln K_A of the ILs and the reciprocal of the dielectric constants of the molecular solvents. The ILs are solvated to a different extent by the molecular solvents, and ionic association is affected significantly by ionic solvation. This information is expected to be useful for the modulation of the IL conductance by the alkyl chain length of the cations, type of anion, and physical properties of the molecular solvents.     

Extraction and high performance liquid chromatographic determination of 3-indole butyric acid in pea plants by using imidazolium-based ionic liquids as extractant

In this paper, imidazolium-based ionic liquids [C₄mim][PF₆], [C₆mim][PF₆], [C₈mim][PF₆], [C₆mim][BF₄] and [C₈mim][BF₄] were tested as extracting solvents for removal of 3-indole butyric acid (IBA) from aqueous media with subsequent determination using HPLC. Percent extraction of IBA was strongly affected by pH of aqueous phases and the chemical structures of ionic liquids (ILs). Extraction of IBA was quantitative in the pH values lower than pK_a of IBA. Considering both extraction and stripping efficiencies of IBA, [C₄mim][PF₆] was found to act more efficient than other studied ILs. Capacity of [C₄mim][PF₆] was 17.6 × 10⁻⁴ mmol IBA per 1.0 mL of IL. Ionic strength of aqueous phase and temperature had shown no serious effects on extraction efficiency of IBA. A preconcentration factor of 100 and a relative standard deviation of 1.16% were obtained. It was found that ionic liquid phase was reusable almost five times for extraction/stripping purposes. 3-Indole acetic acid showed interferential effect in the extraction step. In order to assess the applicability of the method, extraction and stripping of IBA from pea plants and some other samples were studied.     

Gas‐phase dissociation of ionic liquid aggregates studied by electrospray ionisation mass spectrometry and energy‐variable collision induced dissociation

Positive singly charged ionic liquid aggregates [(C_nmim)_m+1(BF₄)_m]⁺ (mim = 3‐methylimidazolium; n = 2, 4, 8 and 10) and [(C₄mim)_m+1(A)_m]⁺ (A = Cl⁻, BF₄⁻, PF₆⁻, CF₃SO₃⁻ and (CF₃SO₂)₂N⁻) were investigated by electrospray ionisation mass spectrometry and energy‐variable collision induced dissociation. The electrospray ionisation mass spectra (ESI‐MS) showed the formation of an aggregate with extra stability for m = 4 for all the ionic liquids with the exception of [C₄mim][CF₃SO₃]. ESI‐MS‐MS and breakdown curves of aggregate ions showed that their dissociation occurred by loss of neutral species ([C_nmim][A])_a with a ≥ 1. Variable‐energy collision induced dissociation of each aggregate from m = 1 to m = 8 for all the ionic liquids studied enabled the determination of E_{cm, 1/2} values, whose variation with m showed that the monomers were always kinetically much more stable than the larger aggregates, independently of the nature of cation and anion. The centre‐of‐mass energy values correlate well with literature data on ionic volumes and interaction and hydrogen bond energies. Copyright © 2008 John Wiley & Sons, Ltd.     

Excess Molar Volumes, Excess Viscosities and Ultrasonic Speeds of Sound of Binary Mixtures of 1,2-Dimethoxyethane with Some Aromatic Liquids at 298.15 K

Densities, viscosities and ultrasonic speeds of sound for binary mixtures of 1,2-dimethoxyethane (DME) with benzene, toluene, chlorobenzene, benzyl chloride, benzaldehyde, nitrobenzene, and aniline are reported over the entire composition range at ambient pressure and temperature (i.e., T=298.15 K and p=1.01×10⁵ Pa). These experimental data were utilized to derive the excess molar volumes (V_m^EV_{\mathrm{m}}^{\mathrm{E}}), excess viscosities (η ^E), and various acoustic parameters including the deviation in isentropic compressibility (Δκ _S ), internal pressure (π _I), and excess enthalpy (H ^E). From the excess molar volumes (V_m^EV_{\mathrm{m}}^{\mathrm{E}}), the excess partial molar volumes ([`(V)]<sub>m,1</sub><sup>E</sup>\overline{V}_{\mathrm{m},1}^{\mathrm{E}} and [`(V)]_m,2^E\overline{V}_{\mathrm{m},2}^{\mathrm{E}}) and excess partial molar volumes at infinite dilution ([`(V)]<sub>m,1</sub><sup>0,E</sup>\overline{V}_{\mathrm{m},1}^{0,\mathrm{E}} and [`(V)]_m,2^0,E\overline{V}_{\mathrm{m},2}^{0,\mathrm{E}}) were derived and discussed for each liquid component in the mixtures. The excess/deviation properties were found to be either negative or positive, depending on the molecular interactions and the nature of the liquid mixtures.     

Reverse ATRP Process of Methacrylonitrile in [C4mim][PF6]

In this original experiment, an ionic liquid, 1-butyl-3-methylimidazolium hexafluorophosphate ([C₄mim][PF₆]), was used as the reaction media for reverse atom transfer radical polymerization of methacrylonitrile (MAN) initiated by azobisisobutyronitrile (AIBN) with FeCl₃ and isophthalic acid (IA) as catalyst and ligand. The polymerization in [C₄mim][PF₆] proceeded in a well-controlled manner as evidenced by kinetic studies. Compared with the polymerization in N, N-dimethylformamide (DMF), the polymerization in [C₄mim][PF₆] not only showed better control of molecular weight and narrower molecular weight distribution but also provided more rapid reaction rate with the ratio of [MAN]:[AIBN]:[FeCl₃]:[IA] at 300:1:2:4. The block copolymer PMAN-b-PSt was obtained via a conventional ATRP process in [C₄mim][PF₆] by using the resulting PMAN as macroinitiator. [C₄mim][PF₆] and FeCl₃/IA could be easily recycled and reused and had no effect on the living nature of reverse atom transfer radical polymerization of MAN.     

Viscosities for Ionic Liquid Binary Mixtures with a Common Ion

At present, there is a considerable amount of work devoted to the study of the thermophysical properties of pure ionic liquids, which contrasts with the few data available for their mixtures. One of the most appealing characteristics of ionic liquids is the capability of subtly changing the chemical structure of the cation and anion in order to design appropriate solvents for specific applications. Mixtures of ionic liquids increase enormously this specificity, due to the unlimited combinations that arise from mixing two or more ionic liquids. In this context, the study of the thermophysical properties of these mixtures is revealed as a fundamental task. In this work the viscosities of the ionic liquid binary mixtures with a common ion ([C₆mim] + [C₂mim])[BF₄], ([C₆mim] + [C₄mim])[BF₄], [C₄mim]([BF₄] + [MeSO₄]) and [C₄mim]([PF₆] + [BF₄]) were determined within the temperature range (298.15–308.15) K. The temperature dependence of the viscosity for pure liquids is analyzed by means of the Vogel-Tammann-Fulcher equation and several mixing rules are applied for the mixtures.     

Room temperature ionic liquid as a novel medium for liquid/liquid extraction of metal ions

Room temperature ionic liquids (RTILs) have been used as novel solvents to replace traditional volatile organic solvents in organic synthesis, solvent extraction, and electrochemistry. The hydrophobic character and water immiscibility of certain ionic liquids allow their use in solvent extraction of hydrophobic compounds. In this work, a typical room temperature ionic liquid, 1-butyl-3-methylimidazolium hexafluorophosphate [C₄mim][PF₆], was used as an alternative solvent to study liquid/liquid extraction of heavy metal ions. Dithizone was employed as a metal chelator to form neutral metal-dithizone complexes with heavy metal ions to extract metal ions from aqueous solution into [C₄mim][PF₆]. This extraction is possible due to the high distribution ratios of the metal complexes between [C₄mim][PF₆] and aqueous phase. Since the distribution ratios of metal dithiozonates between [C₄mim][PF₆] and aqueous phase are strongly pH dependent, the extraction efficiencies of metal complexes can be manipulated by tailoring the pH value of the extraction system. Hence, the extraction, separation, and preconcentraction of heavy metal ions with the biphasic system of [C₄mim][PF₆] and aqueous phase can be achieved by controlling the pH value of the extraction system. Preliminary results indicate that the use of [C₄mim][PF₆] as an alternate solvent to replace traditional organic solvents in liquid/liquid extraction of heavy metal ions is very promising.     

Structural studies in main group chemistry : XXII. Structural and tin-119 mössbauer studies of some five-coordinate triorganotin anions

The structures of two complexes, [Ph₃PCH₂Ph]⁺[Bu₃SnCl₂⁻]⁻ and [Ph₃AsCH₂COPh]⁺[Ph₃SnCl₂]⁻, have been determined by X-ray diffraction. Both materials are monoclinic, space group P2_1/c. Unit cell data for [Ph₃PCH₂Ph]⁺−[Bu₃SnCl₂]⁻ are a 9.8521(6), b 16.9142(4), c 22.3517(7) Å, β 91.4235(9)°; and for [Ph₃AsCH₂COPh]⁺[Ph₃SnCl₂]⁻ a 34.9760(3), b 11.1290(5), c 24.2410(2) Å, β 108.56(2)°, and both consist of the component ionic species. The organotin anions each have trigonal bipyramidal geometry with equatorial organic groups and axial halogens. In the [Ph₃SnCl₂]⁻ anion the two Sn---Cl bond distances are the same (2.58(1) and 2.60(1) Å), but in [Bu₃SnCl₂]⁻, as in [Me₃SnCl₂]⁻, they are substantially different (2.573(7) and 2.689(6) Å). The Sn---C bond distances also vary: [Ph₃SnCl₂]⁻ 2.15(4), 2.16(3) and 2.25(5); [Bu₃SnCl₂]⁻ 2.21(1), 2.20(2) and 2.29(2) Å. Tin-119 Mössbauer data for these and several other similar complexes are also reported.     

离子液体型表面活性剂研究

以1-甲基咪唑为原料, 制备了6个常规离子液体: 1-正丁基-3-甲基咪唑四氟硼酸盐及六氟磷酸盐(简称[bmim][BF₄]及[bmim][PF₆])、1-正己基-3-甲基咪唑四氟硼酸盐及六氟磷酸盐(简称[hmim][BF₄]及[hmim][PF₆])、1-正十六烷基-3-甲基咪唑四氟硼酸盐及六氟磷酸盐(简称[C₁₆mim][BF₄]及[C₁₆mim][PF₆])和4个功能化离子液体: 1-(2-羟乙基)-3-甲基咪唑四氟硼酸盐及六氟磷酸盐(简称[2-hemim][BF₄]及[2-hemim][PF₆])、1-乙氧羰基甲基-3-甲基咪唑四氟硼酸盐及六氟磷酸盐(简称[eocmmim][BF₄]及[eocmmim][PF₆]). 研究了这两类离子液体的一些物理性能, 旨在挖掘离子液体在香料香精化妆品工业中的应用价值. 分别检测了它们与一般溶剂的互溶性, 并测定了它们的表面张力和发泡性能, 实验结果表明, 仅[C₁₆mim][BF₄]和[C₁₆mim][PF₆]具有发泡性能, 发泡力分别为68和120 mm.     

Vanadium(III) Complexes with Picolinic Acid and Dipicolinic Acid in Aqueous Solution

The complex species formed in aqueous solution (25 ^∘C, I = 3.0 mol-dm⁻³ KCl ionic medium) between V³⁺ cation and the ligands: picolinic acid (Hpic, HL) and dipicolinic acid (H₂dipic, H₂L), have been studied potentiometrically and by spectrophotometric measurements. The application of the least-squares computer program LETAGROP to the experimental emf (H) data, taking into account the hydrolytic species of V³⁺ ion, indicates that under the employed experimental conditions, the formation of the complexes [VL]²⁺, [V(OH)L]⁺, [VL₂]⁺, [VL₃], [V₂OL₄] with picolinic acid and the complexes [VL]⁺, [V(OH)L], [V(OH)₂L]⁻, [V(HL)(L)], and [VL₂]⁻ with dipicolinic acid were observed. The stability constants of the complexes formed were determined by potentiometric measurements, and spectrophotometric measurements were done in order to perform a qualitative characterization of the complexes formed in aqueous solution.     

Densities and Excess Molar Volumes of Binary and Ternary Mixtures of Aqueous Solutions of 2,2,2-Trifluoroethanol with Acetone and Alcohols at the Temperature of 298.15 K and Pressure of 101 kPa

Excess molar volumes V_m^E of the binary mixtures of (trifluoroethanol + 1-propanol), (trifluoroethanol + 2-propanol), (acetone + water), (methanol + water), (ethanol + water), (1-propanol + water), (2-propanol + water), and the ternary mixtures of (trifluoroethanol + methanol + water), (trifluoroethanol + ethanol + water), (trifluoroethanol~+ 1-propanol + water), (trifluoroethanol + 2-propanol + water) and (trifluoroethanol + acetone + water) were measured with a vibrating tube densimeter at the temperature of 298.15 K and the pressure 101 kPa. The extrema in V_m^E of trifluoroethanol mixtures occur at –0.690 cm³-mol^–1 for (trifluoroethanol + 1-propanol), at –0.990~cm³-mol^–1 for (trifluoroethanol + 2-propanol); at 0.562 and –0.973 cm³-mol^–1 for (trifluoroethanol + methanol + water), at 0.629 and –0.973 cm³-mol^–1 for (trifluoroethanol + ethanol + water), at 1.082 and –0.659 cm³-mol^–1 for (trifluoroethanol~+ 1-propanol + water), at 0.998 and –0.991 cm³-mol^–1 for (trifluoroethanol~+ 2-propanol + water), and at 0.515 and –1.472 cm³-mol^–1 for (trifluoroethanol + acetone + water). The experimental ternary V_m^E values were predicted by empirical expressions using binary solution data.     

Ionic liquids enhanced oil recovery from oily sludge-experiment and mechanism

The oily sludge would cause environment pollution, and would cause the heavy oil waste. Therefore, it was vital for us to find novel methods to obtain heavy oil from the oily sludges. In this study, the [C₁₂mim][PF₆] and [C₁₂mim][Br] ionic liquids(ILs) were used to enhance the oil recovery. The toluene could obtain the highest oil recovery, and both the two ILs could increase the oil recovery. Toluene could obtain the highest oil recovery (89.4 wt%), and n-octane could obtain the lowest oil recovery (76.8 wt%). [C₁₂mim] [PF₆] could efficiently increase the heavy oil recovery to 91.2 wt%(by toluene). The [C₁₂mim][Br] could increase the heavy oil recovery further. Both the [C₁₂mim] [PF₆] and the [C₁₂mim][Br] ionic liquids could increase the heavy ois C/H ratio, decrease heavy oil viscosity and increase the sands hydrophilicity. The [C₁₂mim][Br] ionic liquids showed better effect. In addition, the ionic liquids could increase the solvents recovery, and the ionic liquids recovery were high. Therefore, the ionic liquids enhanced oil recovery could be recycled to ten times. The two ionic liquids could effectively decrease the heavy oil interaction force, and when the ionic liquids increased to 200 ppm, the force remained stable. In the end, the ionic liquids enhancing solvent extraction mechanism was put forward.     

Polyvinyl alcohol–ionic liquid composition for promoting the direct electron transfer and electrocatalysis of hemoglobin

The direct electron transfer and electrocatalysis of hemoglobin (Hb) entrapped in polyvinyl alcohol (PVA)–room temperature ionic liquid (i.e., 1-octyl-3-methylimidazolium hexafluorophosphate [OMIM]PF₆) composition has been investigated by using cyclic voltammetry and chronocoulometry. It is found that the composition can promote the direct electron transfer of Hb and the heterogeneous electron transfer rate constant (k_s) of immobilized Hb is enhanced to 19.9 s⁻¹. The immobilized Hb also shows high electro-catalytic activity towards the redox of oxygen, hydrogen peroxide and nitrite. The Michaelis constants (K_m) decrease to 1.2 × 10⁻⁴ M (for hydrogen peroxide) and 9.4 × 10⁻³ M (for nitrite). The surface concentration of electroactive Hb is estimated and it is ca. 1.4 × 10⁻¹⁰ mol cm⁻², meaning that several layers of immobilized Hb take part in the electrochemical reaction. When gold nanoparticles (GNP) is introduced into the composition, the resulting PVA–GNP–[OMIM]PF₆ composition presents better performance. The electrochemical characteristic of immobilized Hb is improved further. Thus PVA–GNP–[OMIM]PF₆ composition is more suitable for the immobilization of Hb. Therefore, it is a good strategy to prepare novel composition for protein immobilization by using several materials with different function.     

Synthesis and conformational studies of palladium(II) complexes containing [PhP(O)NP(E)Ph]− (E=S or Se)

The ligands [Ph₂P(O)NP(E)Ph₂]⁻ (E=S I; E=Se II) can readily be complexed to a range of palladium(II) starting materials affording new six-membered Pd–O–P–N–P–E palladacycles. Hence ligand substitution reaction of the chloride complexes [PdCl₂(bipy)] (bipy=2,2′-bipyridine), [{Pd(μ-Cl)(L–L)}₂] (HL–L=C₉H₁₃N or C₁₂H₁₃N), [{Pd(μ-Cl)Cl(PMe₂Ph)}₂] or [PdCl₂(PR₃)₂] [PR₃=PPh₃; 2PR₃=Ph₂PCH₂CH₂PPh₂or cis-Ph₂PCH=CHPPh₂] with either I (or II) in thf or CH₃OH gave [Pd{Ph₂P(O)NP(E)Ph₂-O,E}(bipy)]PF₆, [Pd{Ph₂P(O)NP(E)Ph₂-O,E}(L–L)], [Pd{Ph₂P(O)NP(E)Ph₂-O,E}Cl(PMe₂Ph)] or [Pd{Ph₂P(O)NP(E)Ph₂-O,E} (PR₃)₂]PF₆ in good yields. All compounds described have been characterised by a combination of multinuclear NMR [31 P{1 H} and 1 H] and IR spectroscopy and microanalysis. The molecular structures of five complexes containing the selenium ligand II have been determined by single-crystal X-ray crystallography. Three different ring conformations were observed, a pseudo-butterfly, hinge and in the case of all three PR₃ complexes, pseudo-boat conformations. Within the Pd–O–P–N–P–Se rings there is evidence for π-electron delocalisation.     

Excess molar volumes and viscosities of binary mixtures of 1,2-diethoxyethane with chloroalkanes at 298.15 K

Excess molar volumes (V _m ^E ) and viscosities (η) of the binary mixtures of 1,2-diethoxyethane with di-, tri- and tetrachloromethane have been measured at 298-15 K and atmospheric pressure over the entire mole fraction range. The deviations in viscosities (δlnη) and excess energies of activation (δG*^E) for viscous flow have been calculated from the experimental data. The Prigogine-Flory-Patterson (PFP) model has been used to calculateV _m ^E , and the results have been compared with experimental data. The Bloomfield and Dewan model has been used to calculate viscosity coefficients and these have also been compared with experimental data for the three mixtures. The results have been discussed in terms of dipole-dipole interactions between 1,2-diethoxyethane and chloroalkanes and their magnitudes decreasing with the dipole character of the molecules. A short comparative study with results for mixtures with polyethers and chloroalkanes is also described.